TS1501 I am not able to enable my apple devices with Image Capture

I am trying to enable my iphone, ipad, and ipod to connect with iphoto and it won't connect. I have turned this feature off in the past, but can't figure out how to turn it back on again.

Im also experiencing this issue.
I have at some point disabled my phone from being recognized in osX presumably by choosing "no application" when it is connected from the options in the device list (whether it was in iPhoto or Aperture or Preview who knows i dont recal).
Now the problem is is that despite having turned on all the "iPhoto>Preferences>General>When connecting a Camera opens...(iPhoto etc)" the phone it self isnt bringing up any notification or even showing up in the device list.
Without it showing up there how am i supposed to re-enable any application from launching when i connect my phone?
iTunes has no problem seeing my iPhone 4 (iOS 6.01) however the Finder/iPhoto/Apperture/Preview et al all cannot see it despite having them set to launch when a "camera" is connected.
HELP!

Similar Messages

  • Not able to use my Apple Remote with my 24" iMac

    I have searched a little high and low for the resolution and it's still not working.
    The Infrared receiver appears to show in System Profiler
    I tested the remote by holding it in front of the iSight camera and it appears to have the light emitting from it.
    I reset the PRAM, SMC and even tried a Safeboot and rebooted normally.
    I tested in a different user account with other applications, and even went as far as creating a new user account. Nada. Front Row/iTunes other media players.
    Before this is asked, I tried not 1, but 2 brand new 2032 batteries. That is not the case. What else can it be? Is there a plist somewhere that I cannot find? I tried also, disabling the sensor, then reenabling it to no avail.
    I'm at my wits end.
    This is on my 24" 2.66ghz iMac. The only software installed recently, was Boxee and VLC. This problem occurred before then.
    Note: I tried this same remote on my 17" G5 iMac and worked immediately. So I know the remote works.

    den.thed, no. That was the very first thing I attempted, was look at all relevant support articles.
    Kenichi, yes…in system preferences. The option to unpair was not available. The button remained "Pair". After repeated attempts, I gave up. The "disable infrared receiver" has alwahys remained unchecked. I checked it "to disable it", then unchecked it to (in a way, refresh the status of the infrared receiver) and to no avail.

  • HT4436 I am using IOS 4.1 in Ipod touch. I would like to take my data back using icloud. I am not able to enable icloud in to my ipod touch. please help me for the same.

    I am using IOS 4.1 in Ipod touch. I would like to take my data back using icloud. I am not able to enable icloud in to my ipod touch. please help me for the same. Basically I am trying to take back to upgrade my ios to 5 or 6 version.

    You can't back up to iCloud until you update to iOS 5 or higher.  You will have to back up your iPod on your computer using iTunes.  Update iTunes on your computer to the latest version, then connect your iPod to your computer, open iTunes, if iTunes give you a pop-up asking if you want to update your iPod, decline.  Then click on the name of your iPod in iTunes, go to File>Devices>Transfer Purchases to transfer any purchased media to your iTunes library.  Next, go to the Summary tab of your iTunes sync settings and click on Back Up Now to back up your iPod on your computer.
    When it's done backing up, click on Check for Update (or Update) on the Summary tab of your iTunes sync settings.  Allow your iPod to update, and leave it connected to your computer.  At the end, it will restart and give you the option to restore to the iTunes backup you made earlier.  Choose this option to restore your backup and sync your apps and other iTuens media to your phone.
    This process is outlined in this article: http://support.apple.com/kb/HT4972, under "If you are attempting to update using a Mac or PC with which you normally sync".

  • Not able to enable web access (http server) on 5500

    Hi
    i have 5500 Swtich iam not able to enable http server in it
    the message show below
    Core-Switch> (enable) show ip http
    HTTP Information
    HTTP server: disabled
    HTTP port: 800
    Web Interface: Not supported
    HTTP active sessions: 0
    Core-Switch> (enable) show ver
    WS-C5500 Software, Version McpSW: 5.5(18) NmpSW: 5.5(18)
    Copyright (c) 1995-2002 by Cisco Systems
    NMP S/W compiled on Dec 16 2002, 15:34:48
    MCP S/W compiled on Dec 16 2002, 15:30:03
    System Bootstrap Version: 3.1.2
    Hardware Version: 1.4 Model: WS-C5500 Serial #: 069062010
    Mod Port Model Serial # Versions
    1 2 WS-X5530 008731527 Hw : 1.8
    Fw : 3.1.2
    Fw1: 4.1(1)
    Sw : 5.5(18)
    WS-F5520 008715296 Hw : 1.1
    WS-U5533 009612560 Hw : 1.0
    2 2 WS-X5530 008146970 Hw : 1.5
    Fw : 3.1.2
    Fw1: 3.1(2)
    Sw : 5.5(18)
    WS-F5520 007590229 Hw : 1.0
    WS-U5533 009613415 Hw : 1.0
    3 24 WS-X5234 022374107 Hw : 1.0
    Fw : 4.5(2)
    Sw : 5.5(18)
    4 24 WS-X5234 018022744 Hw : 1.0
    Fw : 4.5(2)
    Sw : 5.5(18)
    5 24 WS-X5234 018025296 Hw : 1.0
    Fw : 4.5(2)
    Sw : 5.5(18)
    6 24 WS-X5234 017582607 Hw : 1.0
    Fw : 4.5(2)
    Sw : 5.5(18)
    7 24 WS-X5234 017919621 Hw : 1.0
    Fw : 4.5(2)
    Sw : 5.5(18)
    10 1 WS-X5304 024975347 Hw : 7.7
    Fw : 20.22
    Fw1: 3.1(1)
    Sw : 12.1(20)

    have you run the 'set ip http server enable' command at the CatOS CLI of the 5500?
    as you've shown above, it is currently disabled
    does the switch have an ip address assigned to interface SC0? does SC0 belong to an inactive VLAN?
    if the switch OS does not support it, it should display an error as follows when you type in the command: (as shown below)
    console> set ip http server enable
    Feature not supported on the system.

  • Not able to Enable the Custom Ribbon button On Pages in Sharepoint 2013

    Hi Team,
    Not able to Enable the Custom Ribbon button On Pages in SharePoint 2013. we have used the button edit properties section of the Pages.
    Same is working for Lists but not for Pages.
    Thanks,
    Shrikant

    Thanks for your reply.
    Right now my server is not working to get the code. will share you in some time.
    I am just thinking if page get checked out and my control is also present in the Edit properties section then do I need to specify something explicitly to enable the button. The same is working for Lists.

  • Cisco 877w - Apple devices not able to see wired apple TV

    Hello All,
    Can anyone point me to a doc or forum discussion on how to setup the wireless interface to forward multicast packets?  Basically I cant get the ipads etc.. to see the AppleTV to control it.  I connected an AP and it works fine so its got to be something with the way the router handles the packets from teh integrated wireless interface.  I've been searching the forum for about 1hr and haven't founf anything other than a breif mention of broadcast forwarding and multicast setup.
    Has anyone got anything more complrehensive I can read?
    Thanks
    David

    Hello David,
    Thank you for contacting the Sales Acceleration Center (SAC) regarding your recent inquiry, Case Number
    Case Description:
    Cisco 877w - Apple devices not able to see wired apple TV
    Case Solution:
    The Bonjour service uses multicast to advertise your Home Sharing enabled device to the local network. In my case the Cisco 877W I was using had a Layer 3 enabled BVI (Bridged Virtual Interface) to which the Wireless Dot11Radio interface was not fowarding multicast packets properly.
    First of all, obtain the Multicast groups your wireless adapter is configured for (on Windows open a command prompt and run the below command):
    The result will give you an output as per below, we are interested in the multicast address directly after the 224.0.0.252 address 239.255.255.250:
    Then we need to enable multicast routing on the router, connect to your router and enter config terminal mode:
    Next we will configure IGMP v3 and add the relevant Wireless interface on your router to the correct multicast address group:
    Next perform the same config your BVI interface:
    Once complete save your changes and confirm both interfaces have been added to the multicast groups using the command sh ip igmp group:
    You now need to reload your router and restart iTunes and then attempt to connect to Home Sharing from your Apple TV.
    Other commands that I used to troubleshoot with were:
    debug ip mpacket - Multicast Packet Debugging
    debug ip mroute - Debug Multicast Routing
    sh ip mroute - Show IP Multicast Routes
    By default the Cisco implementation of a Dot11Radio interface and a BVI interface don't appear to forward multicast packets between each other. Seems odd to me as they're both in the same L2 bridging group..anyway.
    I am going to close the case for this specific inquiry on my side. If you need moere information Please feel free to reach out to me or any member of the SAC team if we can be of any further assistance or if you have any other related questions in the future. We strive to provide you with excellent service. We value your input and look forward to serving you moving forward.

  • I am not able to register my Apple ID for iCloud and the error is "the maximum no of free accounts have been activated on this phone" can any one help me why I need to do

    I am not able to register my Apple ID for iCloud and the error is "the maximum no of free accounts have been activated on this phone" can any one help me why I need to do

    Sir, your Apple ID can be used as an iCloud account as well. They are both the same thing.
    You can learn more from --> Set up your Apple ID for iCloud and iTunes - Apple Support

  • Not able to create a material document with movement type 103

    I am not able to create a material document with movement type 103,
    The system is populating the value as 101 .
    How do I create a matdoc with movement type 103?

    What is the error you receive? Please specify with message number.
    On MIGO, you need to change the default value mvmt type value to 103 before you enter the PO number to be able to do 103.
    Once this defualt value is set, you can enter the PO and item number in the document number fields and proceed with 103.
    But you cannot change the mvmt type for already entered items from 101-103 or vice versa.
    I think the 101-103 and 103-101 mvmt type conversion message is standard error message

  • I have garagaband for iOs in my iPhone 4S, I connect my squire iOs guitarr to the iPhone, I select a Guitar Amp at the GB app then I Only can tune the guitar but I m not able to make the guitar ring with the amps. May some one help me?

    I have garagaband for iOs in my iPhone 4S, I connect my Squire iOs guitarr to the iPhone, I select a Guitar Amp at the GB app then I Only can tune the guitar but I m not able to make the guitar ring with the amps. May some one help me?

    You got the new iphone?????   I have same problem.  I transferred audiobooks to device to find no audiobooks on device (despite it being in iTunes as if it was).  Have you found a solution?????   I even tried to change import settings on format transfer but hasn't worked. 

  • Ipod touch 4th gen needed a new screen and sleep/wake switch.  So, I replace them.  I was able to get to settings and do "erase all content and settings".  I am not able to totally shut this device off as it keeps restarting after a few seconds.

    Ipod touch 4th gen needed a new screen and sleep/wake switch.  So, I replace them.  I was able to get to settings and do "erase all content and settings".  I am not able to totally shut this device off as it keeps restarting after a few seconds.  I have used itunes to restore and also recover.  Device will actually shut off and stay shut off if I leave it connected to the computer.  The moment I unplug (3 seconds) the apple logo appears, it boots, unlock screen appears, I can unlock and operate normally, unplugged or not.  Just cant get it to completely shut down unplugged.  Any thoughts?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
      - If still not successful that usually indicates a hardware problem. Maybe you installed a bad component or damaged something during the repair/replacement.
    Apple will not help since you worked on the iPod yourself.

  • I've downloaded the newest version of softwear to my iTunes libary (iOS 10.5 i believe) iTunes store now dosn't function right and i'm not able to sync. my iPod 4G with my libary. i've tried to reinstall iTunes, but for no use. help please.

    I've downloaded the newest version of softwear to my iTunes libary (iOS 10.5 i believe) iTunes store now dosn't function right and i'm not able to sync. my iPod 4G with my libary. i've tried to reinstall iTunes, but for no use. help please.

    well i have to be honest, but i don't know if it the vista you use has any significance for this. but you can try.
    okay follow:
    1: click "start" on the status line on the buttom of your screen.
    2: then click on "all Programs" and find "Accessories" and find the "command prompt"
    3: Right click with your mouse "command prompt" and click on "run as administrator"
    (as you has click'd on "run as administrator", "command prompt" should appear.)
    4: when it appears you need to type this "netsh windsock reset"
    5: wait for your computer to registrer the command you gave it, and restart your computer.
    then erverything should be pretty much as good or better then new.

  • I am not able to signin using apple ID in imassge and face book it says user name or password wrong plz help

    I am not able to signin using apple ID in imassge and face book it says user name or password wrong plz help

    I think there has been a change in the password requirements for apple ID's.  I think it now needs to be eight characters long and have at least one capital letter and one number.  Got to appleid.apple.com and then to manage your account and change your password to something that meets the requirements I mentioned and see if that helps

  • Hello, i changed my mediathek-folder due to space-problems and since then i am not able to fill the iphone (4) with music anymore. also i cant delete music in itunes, which already is on the iphone... HELP!!!

    hello, i changed my mediathek-folder due to space-problems and since then i am not able to fill the iphone (4) with music anymore. also i cant delete music in itunes, which already is on the iphone... HELP!
    does anybody know how to solve this problem? thx!

    If you want to try to clear even more disk space see https://discussions.apple.com/thread/5872318?tstart=0

  • I am not able to sync my ipod 4g with itunes.

    I am not able to sync my ipod 4g with itunes. Says unable to "load data class"!!!! Please help!!!!! SOS!!! I have tried every possible trick present in google!!! But nothing helped!!!!
    Below is what I tried from the threads on google!
    I do not have a folder called "SyncServices" in my HDD!
    Sync process is not shown in the task manager!
    I have tried renaming/copying the "sqlite3.dll" but yet nothing worked!
    I reinstalled i tunes 8 times!
    I degraded itunes ASWELL!
    I tried restoring!
    I tried erasing Sybc history!
    (You may noe have an idea how ****** I may be!!!)
    Please for gods sake help me fixing this out!! I can wait to sync my stuff!

    I finally solved this problem my self!!
    There is no other way to get this sorted than to re-install windows. It may be some corrupt windows file that causes this error.
    TIP- If you do not want to erase all the data on your PC reinstall windows on another empty drive thus making your computer run on dual OS's.

  • Why i am not able to connect my apple mobile 4s to apple mobile 5 via bluetooth ?

    Dear sir
    Pls advise why i am not able to connect my apple mobile 4S to apple mobile 5 via bluetooth.
    Or pls advise how i can tranfer music & movies from one apple phone to other.
    Regards
    Pradeep

    Hello shreejith786
    The iPhone does not transfer music and videos via Bluetooth. To move content from one iPhone to another, you will need iTunes or iCloud handle that. If you have purchased content from the iTunes Store, you can download them directly. The articles below will assist with getting your media to your other iPhone.
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/HT2519
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

Maybe you are looking for