TS1503 9.06 gb of other and I don
I tried to sync my iPhone 4s and I saw that I had 8.5 gb of "other" so I restored it and then it showed that I had 9.06 gb of other. I tried everything on here and nothing has worked.
It sounds like there is corrupt data in one of your apps. One option is to restore agin as new, then one by one manually add back your apps and check your Other memory after adding each app. You can do this while connected to iyunes and resyncing after adding each one and watching your "other" memory each time, Its tedious, but that way you can zone in on which app it is. Maybe start from the last app you added and go backwards.
Similar Messages
-
How Do I Help Apple US & Apple Europe Stop Warring With Each Other And Fix The Problem They Created?
PROBLEM
Apple will not replace, as promised, the iPhone 5 (A1429 GSM model) that they gave me in London, UK, with an iPhone 5 (A1429 CDMA model).
BACKGROUND
My iPhone 5 (A1429 CDMA model) was purchased this year in September on an existing Verizon Wireless (VZW) line using an upgrade. The purchase took place in California and the product was picked up using Apple Personal Pickup through the Cerritos Apple Retail Store. I will refer to this phone at my "original" phone.
The original phone was taken into the Apple Store Regent Street in London, England, UK on November 15, 2012. The reason for this visit was that my original phone's camera would not focus.
The Apple Store Regent Street verified there was a hardware problem but was unable to replace the part.
The Apple Store Regent Street had me call the US AppleCare. At first they denied support, but then a supervisor, name can be provided upon request, approved the replacement of my original phone with an iPhone 5 (A1429 GSM model) as a temporary solution until I got back in the US. And approved that the GSM model would be replaced with a CDMA model when I came back to the US. I will refer to the GSM model as the "replacement". They gave me the case number --------.
The Apple Store Regent Street gave me the replacement and took the original. The first replacement did not work for reasons I do not understand. They switched out the replacement several times until they got one that worked on the T-Mobile nano SIM card that I had purchased in England, UK. Please refer to the repair IDs below to track the progression of phones given to me at the Apple Store Regent Street:
Repair ID ----------- (Nov 15)
Repair ID ----------- (Nov 16)
Repair ID ----------- (Nov 16)
The following case number was either created in the UK or France between November 15 to November 24. Case number -----------
On November 19, 2012, I went to France and purchased an Orange nano SIM card. The phone would not activate like the first two repair IDs above.
On November 24, 2012, I went to the Apple Store Les Quatre Temps. The Genius told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault. They had me call the AppleCare UK.
My issue was escalated to a tier 2 UK AppleCare agent. His contact information can be provided upon request. He gave me the case number -----------.
The UK tier 2 agent became upset when he heard that I was calling from France and that the France Apple Store or France AppleCare were not helping me. He told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault.
The UK tier 2 agent said he was working with engineers to resolve my problem and would call me back the next day on November 25, 2012.
While at the Apple Store Les Quatre Temps, a Genius switched the phone given to from repair ID ----------- with a new one that worked with the French nano SIM card.
Also, while at the Apple Store Les Quatre Temps, I initiated a call with AppleCare US to get assistance because it seems that AppleCare UK was more upset that France was not addressing the issue rather than helping me. I have email correspondance with the AppleCare US representative.
A Genius at the Apple Store Les Quatre Temps switched the replacement with a new GSM model that worked on the French SIM card but would not work if restored, received a software update, or had the SIM card changed. This is the same temporary solution I received from the Apple Store Regent Street in the UK.
By this point, I had spent between 12-14 hours in Apple Store or on the phone with an AppleCare representative.
Upon arriving in the US, I went to my local Apple Store Brea Mall to have the replacement switched with a CDMA model. They could not support me. He told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault. My instructions were to call AppleCare US again.
My call with AppleCare US was escalated to a Senior Advisor, name can be provided upon request, and they gave me the case number -----------. After being on the phone with him for over an hour, his instructions were to call the Apple Store Regent Street and tell them to review my latest notes. They were to process a refund for a full retail priced iPhone 5 64BG black onto my credit card so that I could use that money to buy a new iPhone 5 64GB black at the Apple Store Brea Mall to reoslve the problem.
The Apple Store Regent Street did not process my refund. He, name can be provided upon request, told me that the AppleCare US did not do a good job reviewing my case, that they were incapable of getting to the bottom of it like they were, and instructed me to call AppleCare US and tell them to review this case number and this repair id. I asked if he read the notes from the AppleCare US Senior Advisor and he would not confirm nor deny. When I offered to give him the case number he accepted but it seemed like would do no good. Our call was disconnected. When I tried calling back the stores automated system was turned on and I could not get back through.
Now I have the full retail price of an iPhone 5 64GB black CDMA on my credit card and Apple will not process the refund as they said they would.
I've, at this point, spent between 14-16 hours at Apple Stores or on the phone with AppleCare representatives, and still do not have the problem resolved.
SOLUTION
AppleCare US and AppleCare Europe need to resolve their internal family issues without further impacting their customers.
Apple is to process a refund to my credit card for the cost of a full retail priced iPhone 5 64GB black.
DESIRED OUTCOMES
I have an iPhone 5 (A1429 CDMA model) that works in the US on VZW as it did before I received the replacement phone in the UK.
Apple covers the cost of the solution because I did not create the problem.
Apple resolves their internal issue without costing me more time, energy, or money.
This becomes a case study for AppleCare so that future customers are not impacted like I have been by their support system.
Does anyone have recommendations for me?
Thank you!
<Edited by Host>Thanks, but I've been on the phone with AppleCare US (where I am and live) and AppleCare UK. They continue bouncing me back and forth without helping resolve the problem.
Perhaps someones knows how to further escalate the issue at Apple? -
Can any one tell me how can I move to a different folder pictures, that I've cloned, without them staying aggregated? They all come together to the other folder and I don't want that… thanks
There's more to it than that.
Folders in Aperture do not hold Images. They hold Projects and Albums. You cannot put an Image in a Folder without putting it in a Project or an Album inside that Folder.
The relationship between Projects and Images is special: every Image must in a Project, and can be in only one Project.
Images can be in as many Albums you want. Putting an Image in an Album does not move it from the Project that holds it.
You can make as many Versions from a Master as you want.
What you want to do may appear simple to you, but it still much adhere to how Aperture works. I still can't tell exactly what you are trying to do (specifically: Images don't live in Folders; moving an Image from a Folder is non-sensical).
It can be very confusing (and frustrating) to get going with Aperture -- but it does work, and can be enormously helpful. If you haven't, take a look at the video tutorials on Apple's Aperture support site.
I feel as though I haven't helped you much -- but we need to be using the same names for interface items in order to get anything done -- and my sense is that you still haven't learned the names of the parts. -
I have the latest version of itunes. I turned on the home sharing, and it asked for my ID and everything and it said it loaded. Then I went to open another library up and I don't know if the library is available to me. How do I get to the other library from my computer? I'm using the same home sharing username and password, but i don't see it. The other library has the latest version as well.
If you click View, Show Sidebar you will see the other libraries under Shared in the left hand column. Click on the Library you want and you can expand it to select Music, Movies etc. Select whatever items you want and click import if you want to move them to your Library.
You will have to have all computers authorised with the relevant Apple ID's
Store > Authorise this computer...
This is separate from the Home Sharing username and password and is to allow playing of DRM Movies, TV shows etc from the other computer.
If both Computers use the same apple id this step is not required. -
How can I find an audiobook on my 4th gen shuffle? Can't find it even when I play in order. When I try to tick Sync audiobooks it asks if I want to continue to remove existing music befoer syncing and I don't want to do that. Can anyone help?
Did you already load the audiobook manually (by dragging it to the shuffle)? To confirm that the audiobook is on the shuffle...
Select the shuffle in the iTunes sidebar. If the sidebar (along left side of window) is not visible, from the menu bar, under View, select Show Sidebar.
Click the small triangle to the left of the shuffle name (in the sidebar) to drop down its content list, indented below the shuffle. Click on Audiobooks there. To the right, your audiobook(s) should be listed.
NOTE: if you don't see Audiobooks on the content list, there are no audiobooks on the shuffle.
When you turn ON the shuffle, you are playing from the default All Songs list. Audiobooks (and podcasts) do not play from the All Songs list. You need to use VoiceOver to select the audiobook from the playlist menu. This document explains how to set up and use VoiceOver on your shuffle
http://support.apple.com/kb/HT4322 -
Computers on network can't see each other and can't communicate
I have a Linksys router, WRT54G, which calls itself wireless but has only wired connections. I have my computer and my phone (for Vonage service) plugged into it. My router is then connected to the household router by a CAT 5 cable. The household router is also a Linksys; wireless and with plugs for a half dozen computers.
I get teh Internet fine with no problem, but we want to share my printer on the household network. My housemate cannot see me on the household network and can't see my router either, and can't communicate with my computer with the \\Name command. I can't see the household network and can't communicate with my housemate's computer with the \\Name command.
I am running Windows Firewall. I am sure that so is my housemate.
Is there something special we have to do to set up our routers for the household network to work properly?
It looks like I'm supposed to configure my router to communicate with another router instead of connect directly to the Internet, but when I tried htat and enabled interactive adjusting or whatever I suddenly couldn't access the Intenet and my phone couldn't get a dial tone, until I changed it back.
Tehre isn't any explanation of how to do it anywhere. There aer technical descriptions of what each thing does but I don't see where it says how to set it up or how to troubleshoot.
I don't know if we were supposed to set up networks and manually add each other's computers. Apparently my housemate did not have to do that with his wife's computer or his notebook. They just show up in the network.
Yours,
DoraThanks for your help. Unfortunately between when I last looked at your name and when I managed to reply I forgot your name.
1. For the option that the parts of the network can see each other, you plug the cable into the OUTGOING port of the SECONDARY router? That doesn't make a whole lot of sense; how cuold that possibly work? The way I understand it, the signal can come in only through the incoming plug, which you call the "internet" plug, if I'm understanding you.
2. If you choose the setup that makes any sense - the cable is plugged into the incoming plug - the "internet" plug - on the secondary router, and the ethernet connection on the primary router, can all the computers see each other and their resources, ie, printers they want to share?
3. If not, why on earth?
4. for the second option, it looks like some steps are missing. Why don't you need to disable DHCP and set the router to be a secondary router?
PM me for my contact details.
Thanks!
Yours,
Dora Smith
(Mod note: Edited post for guideline compliance. Email address removed. Use the PM system please. Thanks!)
Message Edited by JOHNDOE_06 on 02-25-2009 08:39 AM -
The mystery of the double headers : one overtakes the other and i dont have two headers in my code
This is a total mystery to me and I have tried to resolve the issue for ages and I don't undestand what is going on!
When I look at my website www.genevievegilbert.com, the top of the browser window from my index page shows me the title 'ARTISTE DES NOUVEAUX...'etc.
When you look at the source code from the browser, the page shows ONE title, which is 'ARTISTE DES NOUVEAU...'etc
When I download that original file from the server itself (index.htm) and open the page in Dreamweaver, it shows me a normal header with the title that I want there, named above.
On my website I have a few links such as 'News'. When you clic on 'News', the top of the browser window from the 'news' page shows me the title
Kfi :: Digital Media creation for your business
Now, this is the title of my corporate website, which I DONT WANT to appear in my creative practice website.
I have no idea why is is part of the title of the other pages in my artist's site. The reason it is a mystery that this title appears there is that when I download to my desktop the actual page (news.htm), IT DOES NOT SHOW TWO TITLES in its header, just one! I open the file in Dreamweaver and the code is written normally, with one title in the header, which contains 'ARTISTE DES NOUVEAU...'etc (which is the title i want on all of this site's pages)
How come does the one on my server displays TWO titles in its sources code then? What is going on? This is SO strange.
The first of the two titles in the header TAKES OVER the second one and it is this one that display when anyone visits the site.
I tested it on explorer, Opera, Safari and Firefox: all the same.
I have created this site with templates and I gave up on using the template system when updating my pages as I don't quite fully understand the power of this system. Would that possibly have to do with my problem? How can I solve that problem?
I am applying for grants and I can't have my creative website talking about me wanting to do business! HELP!
Thanks, GenevièveWould it be a matter of 'CLOAKING' my files?
I found this on the Powweb forums:
PowWeb Community Forums > The PowWeb Platform > Domain Names / DNS > How to make subdirectorys visible?
PDA
View Full Version : How to make subdirectorys visible?
Kommercial
2-12-02, 05:35 AM
Hello,
I want my visitors to be able to see the full directory they are in, in the address bar like, ie; http://microsoft.com/whatever/faq.html
(for example)
As it is currently, they see http://microsoft.com (for example) no matter where they go on my site, it never changes. I can type out http://microsoft.com/whatever/ in the adress bar and it will then display that page and show http://microsoft.com/whatever/ at the top, but once i click on anything to go to another page on my site, it doesn't change to show the new directory , I want it to change as people move thru my site. Seems almost like a URL cloaking feature is turned on, like the ones offered on other domain hosts.
IS this even the right section of the forumn to post this message? Figured it must be "domain name" related.
is this some feature not offered by powweb?
Or is there some simple button to hit in the OPS console?
(btw- i only have one domain name. And my site is all hosted on powweb)
can someone please help
thanks
Dragon
2-12-02, 07:02 AM
having the address not change is most often due to frames ... if you want it to change just get rid of the frames and you should be fine.
VBman
2-12-02, 10:22 AM
Yes, its must be frames that you are using, because my addresses are not 'cloaked' as you described, but rather it shows the current location of each page I go to.
SBGlasby
2-18-02, 09:03 PM
Yes.... THIS IS... one of the many drawbacks of using frames... otherwise the Full URL... of the page... shows in the address bar... -
Have had new iPhone 6 for 2 months, using iOS 8. I share iCloud calendars with 3 others and I am getting bombarded with their upcoming appointment alerts. There seems no way to turn this off. I went to Settings->Notifications->INCLUDE(Calendar)->Shared Calendar Changes and turned everything off, but this only blocks alerts about new events or changes to events being added to the calendars, it does not block the 5-minute/10-minute/etc. alarms that go off immediately in advance of the appointment. There used to be a setting in iOS7 in "Mail, Contacts, and Calendars" way at the bottom to turn off alarms from shared calendars, but I don't see that in iOS8. Any ideas?
Finally figured this out when I read jodiemcneill 's post about Google calendars. Thanks!
Reposting the basic idea: to turn off event alerts from shared ICloud calendars, select the Calendar App, then click the "info" (i.e., the circled red 'i') icon next to the shared iCloud calendar to be silenced. Go down to "Notifications" and turn the slider off for "Event Alerts: (Allow events on this calendar to display alerts.)"
For good measure, you can also turn off the slider for "Show Changes" to prevent the calendar from displaying messages when shared events are added/modified/deleted, although this can be done "globally" for all shared iCloud Calendars in Settings->Notifications->Calendar->Invitations (turn off all sliders, click "none" for Alert Style).
This has been a major pain in the ... neck ... for the past 3 months. So glad to start the new year with a suddnely-much-quieter iPhone 6. -
2 of my movies are no longer working in my iTunes or on my iPod Touch, One doesn't play at all and the other gets to about 29:00 than stops working and I don't want to buy them again. Then also when I added a non-iTunes movie and tried to have iTunes make an iPod/IPhone version it gave me error -4. What's happening to my movies?
I also have to add that the right earbud only doesn't work on my phone while i'm listening to music. If I'm face timing it's okay. what the heck.
-
0.41GB of my iPod Touch 4G's capacity is taken up by something callked 'Others'. What are 'Others' and will it be o.k to delete them? If so how do I go about doing it as there is no trace of a file on either iTunes or my iPod?
Other content is typically miscellaneous data used by applications you have installed - could be save data (e.g. for games), or documents you've created. There's no easy way to determine precisely what it is, but the only way to clear it is to either delete it from within the respective application, or remove the associated application altogether - neither of which are typically practical.
-
My iphone was randomly skipping songs and they would turn grey, so I restored my iphone and now my music is downloading as "Other" and isn't appearing on my iphone at all. What should I do?
Settings > General > Reset > Reset Network Settings.
Restart the device.
Restore as New.
Might also be a good idea to contact the carrier just to verify there are no account issues. -
Have over 86GB of music now showing as "other" and although it is still on my iPod it is not playable. Most is from imported CDs. I do have a backup file on an external hard drive. How can I fix this?
To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
Delete the "songs" that do not play in your iTunes library and reimport them. -
I have a iPod touch and i installed it on my other laptop until i had just got another one it says unable to connect to iTunes and i forgot my password and i delete the email and i don't know how i can get my i pod touch to work with my new one email.
I JUST NEED HELPI would contact Apple under your warranty. I doubt you received a new iPod since Apple's policy is to give you a refurbished iPod.
-
Itunes showing all data as other and sync button greyed out
Itunes showing all data as other and sync button greyed out. I have downloaded and installed Itunes 11 (multiple times) and restored my phone twice already, but I am still not able to sync my Iphone 4 with Itunes.
When I select / de-select Apps on Itunes to remove from the phone the "Apply" button does appear, but after I click it nothing happens. Then the greyed out "sync" button just appears again.
Anyone with some advise please?Try Restarting or Resetting your touch.
Restart: Hold the Sleep/Wake button until the red slider appears and turn off your iPod. Press the sleep/wake button and hold it until you see the Apple icon.
Reset: Hold the Sleep/Wake button and the Home button at the same time. The red slider will appear first, keep hold everything until you see the Apple icon. Release the buttons.
Check your iPod and see if your music and apps have reappeared. If they do after either option, then resync your iPod.
If neither works, then Restore your touch through iTunes. -
I have a new mac mini I5 - I cannot find and copy Maverick onto a flash so that I can install on the other 7 iMacs - don't want to download from App store to each machine - files too big
Please assistYou need to download it on one of the iMacs via App store but not install since after it installs the installation download gets deleted.
After it is downloaded you can copy to a USB device. You can also make a bootable USB install device by:
downloading and using DiskMaker X
Maybe you are looking for
-
Can you program a Slave's Node ID or Zone ID using the USB-8476 as the LIN Master?
I am planning on using the USB-8476 LIN interface as the LIN bus Master in an application. The application would require the USB-8476 (Master) to program a Node ID and Zone ID into a slave device that is on the LIN bus. The slave device is a PIC12F
-
Custom white balance from Canon 5D Mark 3 erased from RAW files when developed in Lightroom 4.2?
Hi Everybody! Got a bit of a problem...I set custom white balance for a lot of my photos (I'm a nightclub photographer) as sometimes the colours are so saturated the image becomes unusable. Unfortunately in Lightroom 4 the photos import with the corr
-
My screen on my Mac book doesn't work anymore and just stays black.
The screen on my Mac book pro does not work anymore. The computer still come on but nothing will come on the screen.
-
Hi Just bought Z30 - so downloaded link latest version and when installing it crashes PC with some irq problem. Is there any way of solving this. I have tried several times to do this. Thanks Andy
-
Multiple Spaces on One Display?
Is it possible to simultaniously display two spaces on one monitor?