TS1538 error code 52

I recently had to do a factory reinstallation on my computer but now neither windows nor itunes are recognizing my iphone 5c. I am sure, at least initially, that it had something to do with the digital signature on my iphone but now it seems to be in the driver. I have gone into windows and checked the box to not require a digital signature but that didn't do anything.
Thanks

A Microsoft support engineer responded here.
Error Code 52 - USB ports not recognizing connected USB devices stating that "Windows cannot verify ...
That's for Windows 7. If you reply, tell us which computer you have and which Windows.
-Jerry

Similar Messages

TS1538 error code 39 windows

I have literally followed every link that I could find to fix this problem.
I have a code 39 on windows vista, My ipod is picked up just fine with no problems, but when I try to plus in my iphone, first it gets picked up as a digital still camera, then when I try to fix the driver, the code 39 pops up telling me that I have a corrupted or damaged driver.
Any suggestions?

When did you see it?
(It's an EOF error)

TS1538 i receive an error code 10 ( the device cannot be started ) when i try to manually install driver for iphone 4s in windows 7

Hi folks,
Can somebody enlighten me on manually downloading the driver for iphone 4s on my windows 7?
i tried reinstalling it several times as instructed in the artcle http://support.apple.com/kb/TS1538 but all i receive is an error code 10 saying that the hardware couldn't be started.
Thanks in advance for helping me out

Are you saying that you are running iTunes 10.7 now and it is still telling you to update iTunes?

HT201210 cannot complete rebooting of my iphone 5 due to error code 9

cannot complete rebooting of my iphone 5 due to error code 9....plz help

Hello don muchie,
The following article provdies some useful troubleshooting steps that can help get your iPhone to work correctly with your computer.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen

HT4097 iTunes wont recognize my iPad error code 50????

i have restored my ipad using itunes but now itunes wont regonise my ipad gives me an error code 50...???? HELP!!!!!!!!

What model iPad and what version of iTunes are you using?
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
 Cheers, Tom

What I should do when my iphone 5 has an error code 31 in shown device manager of my laptop?

My iphone 5 does not recognize as a personal device in my laptop however it is recognize in itunes and it is charging once I connect it to my laptop. In device manager of my laptop, my iphone icon under personal devices it has an exclamation point and checking further details, an error code 31 is being detected. I've to uninstall and disable this from the device manager but it cannot be completely install because of this error code 31.

Hello don muchie,
The following article provdies some useful troubleshooting steps that can help get your iPhone to work correctly with your computer.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen

Cannot delete file from external hard drive (error code 36) in Finder, but Terminal is ok

I have a relatively new Macbook Pro Retina 15" and have a Western Digital 1 TB Passport. I've been using the passport for about a year now without any problems on older Macbooks in my house. I used to be able to read and write to this drive no problem. I am using the Paragon NTFS for Mac software in order to read and write to the NTFS drive. When I navigate through the drive in Finder, if I try to create a new folder, I do not have a problem. If I try to delete that folder I just created, I get this error:
The Finder can’t complete the operation because some data in “untitled folder” can’t be read or written.
(Error code -36)
The folder has nothing in it whatsoever. I just created it. But if I go to Terminal and I run
rm -rf "untitled folder"
This works fine. Why is Terminal acting different than Finder? This does not happen on my other Macbooks. Thanks in advance.

Thanx for such qucik reply!!! The pages were great, it had an answer for my problem, but unfortunately it also involved me dealing with it only on the MacIntosh HD itself, not on mounted external drive I suppose... So it didn't work they say that there is an icon in the left corner indicating locked folder - I don't see any icon on it. It says you can untick the box to unlock the folder - there is no tick to be unticked. Finally, they say that if I don't have permition or rights I cannot delete it. But how do i change permittion which already says that i can read and write in it? So everything appears to be normal only I cannot delete it. there is not even any warnig telling me I don't have enough rights, it just requires the password and after me typing it in it makes the sound of scraping paper but does nothing more. I aslo had some problems with emptying Trash after being seemingly succesful with one file and had got so far to have them appear in the Trash (no clue how this one actully got there though..) I followd the advice and emptied the Trash with Terminal. The Folder is still there but it shows 0 Kb... So far so good BUT: It is still on the external drive, so I obviously only managed to copy it into the Trash!!! Phew, innit a bit too tight to poor owners, this macbook?? I want my rights back!

Report generation failed----error code:-17205; Access Denied.

Hi, All
    i have a trouble about report generation.it seems the error happened at the "write UUT report"--this step is teststand report generation'DLL.
    detail:
    An error occurred calling 'Save' in 'Report' of 'NI TestStand 2010 SP1 API'
Access Denied.. Error writing to file 'D:\program\seq\xxx.xml'.
The file might be open in another application. If file access is intermittently denied, you should try disabling the Microsoft FindFast utility.
    error code:-17205; Access Denied.
    locationtep 'Write UUT Report' of sequence 'Single Pass' in 'SequentialModel.Seq'
    How to fix it?
    Thanks a lot.
BR

Hm, it looks like the file might be open in another application. If you see that file accesss is intermittently denied, you should try disabling the Microsoft FindFast utility.
CTA, CLA, MTFBWY

There was a recent upadate on my PC, however it does not work. A error code comes up which says, min version is not compatible with max version. And I caanot open my browser. Please help.

I do a system restore which allows me to open my browser. Without this I cannot open my browser - the error code comes up every time.

Do a clean (re)install
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
From https://support.mozilla.com/en-US/questions/764376

My ipod touch is not list as a device on itunes. When I tried do update itunes, I get a ox8007054f error code and the update will not complete.

My ipod touch is not listed as a device when connected to my computer. As suggested I attempted to download the latest of itunes. I got an
ox8007054f error code and the down load will not complete. I have also tried to restore my computer to an earlier setting, but it will
not accept the change.

Have you looked at this completed previos discussion. It discusses 0x8007054F.
Re: Error message when trying to install iTunes

Capturing oracle error codes into a variable

Hi
Can someone show me how it is possible to save an Oracle defined error code into a variable? What I am trying to do is when a stored procedure fails an Oracle error is raised, such as ORA-xxxx, then pass this code into variable to be saved into a log.
How do I achieve this?

user633278 wrote:
How do I achieve this?Function SQLCODE in PL/SQL exception handler returns error code. SQLERRM returns message:
SQL> declare
2      x number;
3 begin
4      x := 1/0;
5    exception
6      when others
7        then
8          dbms_output.put_line('Error code: ' || SQLCODE);
9          dbms_output.put_line('Error message: ' || SQLERRM);
10 end;
11 /
Error code: -1476
Error message: ORA-01476: divisor is equal to zero
PL/SQL procedure successfully completed.
SQL> SY.

Error Code:942 While Scheduling a report in BI Publisher

Hi All,
I am trying to schedule one report in BI Publisher.
After Clicking Submit Button while scheduling report,i get following error:
Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.0.0) (Build 080319)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: ORA-00942: table or view does not exist Error Code: 942 Call: UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + 50 WHERE SEQ_NAME = 'JOB_ID_SEQ' Query: DataModifyQuery()
Kindly Help me in resolving this issue
Regards
Amrita Singh

i know the issue,i can give quick fix, but in-order to make sure you don't get another glitch like this.
I would recommend, you to install the scheduler in another schema or another db.
Re-installing the scheduler schema tables will fix this.

ORA-00600: internal error code, arguments: [ktsircinfo_num1]

While taking export of a table received EXP error and while dropping/selecting the same gor ora-600 errors.
. . exporting table TEST4
EXP-00003: no storage definition found for segment(29, 371385)
SQL >Drop table test4 cascade;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
sql> Desc test4;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
I dont want to log TAR with oracle right now... I tried dropping and recreating Undo tablespace but still did not help much . Database version is 9204

hi
read metalink ID - 153788.1
CHeers

Transport control program tp ended with error code 0212

Hi all,
I have created a two system landscape of development & production server. But while I am releasing any request from develpoment server a error is showing: " Transport control program tp ended with error code 0212 Errors: could not access file as supposed (see dev_tp or S".I have chosen development server as domain controller. TMS alert viewer error message also contains the following information------>command: TMS_MGR_READ_TRANSPORT_QUEUE
                                                                       service: transport service
                                                                       start : online
                                                                       Function: TMS_TP_SHOW_BUFFER
                                                                       message: TP_REPORTED_ERROR
In import monitor it's showing : "tp finished: could not access file as supposed (see dev_tp or SLOG1113.K"
Can you tell me how to resolve this issue?

dev_tp contains:
This is R3trans.exe version 6.14 (release 700 - 09.04.10 - 11:26:00).
unicode enabled version
usage: R3trans.exe [<options>] <control_file>
The control_file describes what R3trans has to do.
The following options are possible:
-c f1 f2 : Copy file f1 to f2 with character set conversion.
-d       : DB connect. Test if SAP database is available.
-i file : Import from file without using a control file.
-l file : List the contents of file to the log file.
-m file : List the contents of file to allow tp to create a cofile.
-t       : Test. All database changes are rolled back.
-t4      : Trace level 4. Switch on developer trace.
-u <int> : Unconditional modes. See below.
-v       : Verbose. Write more details to the log file.
-w file : Log file. The default log file is 'trans.log'.
-x       : DB connect without access on any SAP table.
R3trans.exe finished (0012).
& the slog file is not there in the trans/log directory

While activating a request in DSO getting error code 10

While activating a request in DSO getting error code 10
Hi All,
I am trying to load data into Billing: Condition Data (0SD_O06) using 2LIS_13_VDKON. First while loading data I am getting error
Record 8778 :InfoObject SOLD_TO does not contain alpa-conforming value 100000 which I changed manually in PSA maintenence and tried to load data again and now I am getting an error (Error 10 in the update) ID:RSAR No119.
I have checked the formula in Transformation and it works fine. Still I am not able to load data.
Please help.
Thanks and regards
Vishal Pardeshi

Check the log for the request from the manage screen of the DSO, it will be there next to the monitor button.
Otherwise you can check the error from the monitor screen of the request in Details tab.
Veerendra.

TS1538 error code 52

Similar Messages

Maybe you are looking for