TS1538 help! my ipod update failed now is stuck in recovery

if anybody could help id really appreciate it. i've tried all the steps on apple help but nothing is working. its stuck on the recovery screen and isnt showing in itunes, its driving me crazy! wish i hadnt bothered with the update now

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Similar Messages

  • I just tried to update my iphone 4 to the 5.01. My iphone  backed up and started update but now its stuck in recovery mode and will not restore. It gives me an error message of 1, but I have tried everything on troubleshoot list and still wont work!!!!

    I just tried to update my iphone 4 to the 5.01. It said that my phone backed up and started update. i went on a run and came back and my phone is now stuck in recovery mode. It keeps saying that there is an unknown error, 1. I have tried everything on the troubleshooting list and cannot figure out what is wrong! Please HELP!!!

    http://support.apple.com/kb/TS3694#error1

  • I tried to update my iPod touch, but now its stuck in recovery mode.

    Okay so I plugged my iPod into my computer today and it said there was a new update available. I clicked update, but after it finished syncing/updating it went into recovery mode. It says I need to restore the iPod, but everytime I restore it, it just goes back into recovery mode. Iv'e tried shutting it off but it doesn't help

    Go into Recovery Mode per the instructions here.

  • Ipod update failed

    Ipod update failed due to error while updating . Ipod asks now to connect to ipod but while connected it cannot find the ipod.

    What did the error message say?

  • Tryed to update my iphone4s, the update fail, now itunes can not see my phone

    tried to update my iphone4s, the update fail, now iTunes can not see my phone

    Hi kjpservices,
    So it sounds as if your iPhone does not appear in iTune after a failed update to iOS, is that right? In order to get it back into iTunes you will want to use one of these articles, depending on what kind of computer you have -
    For a Windows PC, use this -
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If you are using a Mac, use this -
    iOS: Device not recognized in iTunes for OS X
    http://support.apple.com/kb/TS1591
    Once you get ths iPhone back into iTunes, try the update again. If it fails, post back and we can continue troubleshooting from there.
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Downloaded new iTunes/iPod updater, iTunes now crashes during iPod updating

    I downloaded the new iTunes and iPod updater yesterday-- now when I plug my iPod into the USB, it recognizes my iPod, the "Updating iPod. Do not disconnect." message comes up, but as soon as "Updating Track 1 of 9." appears, I get a Send Error Report message "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience. etc" (I wasn't sure what, if anything, I shoudl include here from the Error Report Contents.) Has anyone else encountered this or have any tips? I've tried the uninstall/reinstall trick to no avail.
    Thanks!

    I fixed this for my Nano by using the iPod Updater Restore to revert the firmware to version 1.0 and removing iTunes 6.0.2 through Control Panel. I didn't delete the leftover directories. I then reinstalled iTunes version 6.0.1.3.
    The Nano is now happily recopying all my music. Should be done by midnight.
    Good luck.

  • Recently updated to itunes 10.6.1, but during update it says itunes does not have a valid signature and update fails ,now older version is not able to connect to itunes store

    Recently updated to itunes 10.6.1, but during update it says itunes does not have a valid signature and update fails ,now older version is not able to connect to itunes store error 306. I am using windows 7.

    (Apologies for butting in, wha.)
    now older version is not able to connect to itunes store error 306. I am using windows 7.
    If you still get the 306 after updating to 10.6.1.7, perhaps try the following user tip:
    iTunes for Windows 9.0.x: Error 306

  • I had a itune update fail, now I get an error message (windows error 2). what do I need to do?

    I had an itune update fail. now I get an error message. "windows error 2". I can not open itunes!

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • My iPod touch 5th g. is stuck on recovery mode, before this i was trying to update it to ios8. I'm trying to connect it to iTunes but its under unspecified and doesn't connect to itunes(asus eee pc) What do i do?

    my iPod touch 5th g. is stuck on recovery mode, before this i was trying to update it to iOS8. I'm trying to connect it to iTunes but its under unspecified and doesn't connect to iTunes(Asus Eee pc) What do i do? please help me.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     
    And as necessary:
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or                     
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • HT4623 i am updating software now im stuck on itunes and the plug to plug it in my computer what do i do now.

    i am updating software now im stuck on itunes and the plug to plug it in my computer what do i do now.

    Um, how about plugging it into your computer? 

  • TS1363 My Ipod touch 4th Generation, Is stuck in recovery mode.

    Okay, my Ipod touch 4th generation, Is stuck in recovery mode after trying to restore and update it to the latest software. The restore failed and it's now stuck in Recovery mode. I've tried everything, and it just wont work. It won't even recognise in Itunes. Help?

    I don't know if you will see or get this because issue is old but I thought I'd try anyway.  This is what happened to me.  I don't see any responses, if you don't mind me asking, what ever happened with your ipod?  This is my son's and I don't have a store around the corner so I was curious before I make a trip?

  • My iPod touch 4th gen is stuck in recovery mode with a broken 'lock' button.

    My iPod touch 4th generation is stuck in recovery mode with a black screen and I can't get it out. It has a broken lock button and I have tried everything to get it out of recovery mode. Every time I plug it into iTunes, it recognises my iPod and says 'iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used in iTunes, so I have restored it several times and every time, it says there is an unknown error. Please Help!! (my iPod is IOS 6.0.1)

    What is the complete wording of the error message that says unknown error? Usually more information like a error number is also given.

  • TS3694 when restoring my iphone i get an error code of 1015 , why is this and how do i restore my phone as now its stuck in recovery mode ?

    when restoring my iphone i get an error code of 1015 , why is this and how do i restore my phone as now its stuck in recovery mode ?

    Errors related to downgrading iOS
    The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

  • HELP! Firmware update failed, need to extract data from unreadable iPod

    Please HELP! I have important data on my iPod that I need to preserve. Here's what I did:
    * downloaded newest iPod software and used the iPod Updater. It assured me the the "Update" process does not touch songs/data on my iPod
    * clicked the Update button. The update failed, citing error writting data to disk.
    * now my iPod will not boot up (folder icon), on top of that it will not mount even in Disk Mode (claims it's unformatted).
    * iPod Updater now offers only the Restore option
    I absolutelly NEED to get the data of my iPod if I am to restore it. The data should still be on the disk (even if the firmware is damadged), it's just a matter of gaining access to it.
    Any chances?
    iPod video Windows XP

    Good luck.
    Sounds like a problem I had with a camera card - and I lost the pictures, and I have yet to restore the camera card - it's still dead, won't even format.
    Take it someplace where they specialize in data recovery - for high fees....

  • 2.1 update failed, now Ipod won't work

    So I foolishly paid the 10 bucks to download the new 2.1 update for my ipod touch, and at the end I got an error saying the update failed. So, I have tried to restore, and it gets through the whole process, then gets stuck on "veryfing ipod software...". I'm pretty sure something is wrong because the ipod turns off. Now I can't use my ipod at all. What can I do if I can't get it to restore? THe nearest Apple store is an 8 hour drive?

    Are you trying to upgrade to 2.0 in your new user account as well? If not, try that, so iTunes downloads a new copy of that software installer, just in case the one downloaded on your normal user account is somehow damaged or unusable.
    If the Apple store isn't convenient, you can call Apple or go online to set up mail in service. They basically send you a box to send your iPod back to them, and then send a replacement out.
    http://www.apple.com/support/contact/
    http://depot.info.apple.com/ipod/
    CG

Maybe you are looking for

  • Calling APEX page in Rich Text Editor Content

    In my application I am using the Rich Text Editor to allow users to enter a block of text that is rendered within a page. In some cases, they would like to link to other pages in the application from within that block. The problem I am having is figu

  • Warning: ocilogon() [function.ocilogon]: OCIEnvNlsCreate() failed.

    Right now I am getting the following error when I try to connect to any of my Oracle databases: Warning: ocilogon() [function.ocilogon]: OCIEnvNlsCreate() failed. There is something wrong with your system - please check that ORACLE_HOME is set and po

  • Safari 3.0.4 and DjVu Browser Plugin: No Go.

    I just installed the 10.4.11 Update (Combo) and everything went fine (it even fixed an old Finder glitch, the eject button next to Network and the menu bar Go/Network broken link), except for Safari, this new version doesn't let me open DjVu files. T

  • How to install adjustment presets in Aperture 3

    I have some adjustment presets downloaded from the Internet.  How do I get them into Aperture?

  • Mail won't run - can I rebuild without running Mail?

    I was installing the latest update to Mail Tags in Mail and it crashed in the process of the update. Now mail won't run - it just hangs. I reinstalled Mail and it's still doing the same thing so it must be the mail data file (right?). Can I rebuild t