TS1538 I have iPad 3. Today, I updated iOS software with the latest update. After that it does not start up. Again and again the apple logo is flashing and nothing is happening. My device is not also detected in iTune. I did every possible things to resta
I have a iPad 3 (wifi+cellular). Today I updated with the latest software update. But after the installation of the update it doesn't start. Again and again the apple logo flashes and nothing happens. I tried to reset it by accessing it through iTune. But it is not recognized by iTune. Please help.
Hello bhar.suman,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Have a nice day,
Mario
Similar Messages
-
i have a nano 4th generation 8gb i have tried resetting it, i get the apple logo come up but nothing else happens. It will work in my docking station but as soon as i take it out it will not respond. any ideas, do i need a new battery?
It definitely sounds like your Nano needs a new battery at this point. You can have Apple replace it for a flat fee, send it into a third party service center to be replaced for much less, or you can purchase a new battery online and swap it out yourself if you feel up to it.
B-rock -
recently i updated my software to 7.0.4 after that my mails automatically increased to more than 600 when actually i had not even 100. and i cant even see my mails there is no option to view them??
Illaas,
I tried the manual method. I was able to set the music/video to manual and then restarted the entire system. After restart, I re-attached the ipod touch to the computer. The sync automatically ran for everything that wasn't set to manual and it completed without a problem. I then reset the music/video to automatically sync and restarted the entire coputer/ipod set again. This time when I re-attached the ipod, EVERYTHING synced and there were no problems reported. I've never had to do this before, but I will keep it in mind if something like this happens again. Thank you for pointing me to the manual sync. -
i am facing a problem in my IPod . it is not detected by computer i tried every possible thing i changed cable i installed new itunes still its not coming up in itunes. can you please help me regarding this problem.
This is for Windows: http://support.apple.com/kb/TS1538
-
IBook will not start up past gray screen w/ apple logo
iBook will not start up past gray screen w/ apple logo. So I have zeroed out the hard drive and reinstalled tiger. No change except if I start up holding shift it will boot and welcome comes up then black screen that says you must restart by holding down power key.
Zeroed out the HD again with same results. Also I have a iBook G3 with the same symptoms.What you are experiencing is a kernel panic.
Try starting up from the Mac OS X Install Disc by inserting the disc and restarting your computer, holding down the C key as the startup chime is ending. Then choose Installer > Open Disk Utility (in Panther) or (in Tiger) click 'Next' at the language screen and choose Utilities > Disk Utility and select the hard drive in the left column. Choose the First Aid tab. Click Repair Disk to test and repair the hard drive.
Once you have repaired the hard drive with the Install disc's Disk Utility, then try to restart normally, and go to Applications > Utilities > Disk Utility. Click on the top hard drive icon in the left sidebar and note the S.M.A.R.T. status at the bottom right of the pane. What does it say?
Select the named boot volume in the left sidebar, ("Macintosh HD" unless you've renamed it). What is the hard drive capacity and how much space remains available on it? Repair permissions on it.
See if a little hard drive maintenance helps things out. -
So i was updating my ipod earlier yesterday, i kinda steal wifi from the neighbors so it was pretty weak.... i lost wifi (i think) because it stopped loading, so i turned off my ipod. And when i tried turning it on again it did the apple logo then went to a full out pink screen. Ive tried turning it back on and off a billion times, and sometimes the screen colors will change. I recently just tried restoring it like 10 times and usually itll just interenwrupt the restoring process. By the way, wh i plug it into the computer it doesnt recognize the device. I had to put it into recovery mode. Pleasehelp, this ipotd is my life. I cant take it to the apple store because its badly cracked, and ive had it for about 2 y and a half years. PLease help.
Hi-
I had the same thing happen to me Thursday night, and I just got mine right 30 minutes ago (and it is now Saturday am). Like you I repeatedly tried to restore it (by holding down the home key and powere button at the same time; then plugging it up to my computer and trying to get it to restore through iTunes). My computer didn't initially recognize my ipod either. - One thing- be sure that your battery isn't dead/dying. If it is, charge it (it should charge-mine did), then start the process of restoring it again. Make sure when you hold the home and power keys down that you are linked to iTunes.- You will eventually get a screen that has the itunes icon it, with a usb cable underneath it. At that point your computer will recognize your ipod, and you'll be able to restore it...This will take a LONG time.- Good luck. -
MacBook Pro not starting up, has faint lines across apple logo and runs hot
Hello, my MacBook Pro 2011 model is not working. I when trying to start it up it has faint horizontal lines, equally spaced, all across the screen. When the apple logo disappears the machine stops progressing any further, and starts running really hot. Yesterday I had to run the batter flat before I could get it to start properly and it ran all day fine. Today it logged in but then went haywire with split desktop and horizontal lines and crashed. Can't get it to restart.
i haven't a clue what's wrong, and I can't afford to replace it right now. Any ideas anyone?
blessings,
DAviddavid.moody wrote:
I Should also say that today numerous resets have not solved the problem.
Are you referring to SMC and PRAM resets?
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
If not, try them:
Run an Apple Hardware Test. That may pick up a clue:
http://support.apple.com/kb/ht1509
Run the extended version. Note that an error free test is not 100% reliable.
Ciao. -
My iPhone 5 will not start it just turns on to apple logo and goes to dark blue screen.
How do I turn on ?
Hi Chuyy76,
From your post I see that your iPhone will not boot past the Apple logo. There are troubleshooting steps I'd like you to follow through, which can be found in the article linked to below.
iOS: Not responding or does not turn on - Apple Support
Thanks for using the Apple Support Communities!
Cheers,
Alex H. -
IPod will not start or reset, plugging in makes apple logo flash on and off
My friend's iPod nano 3G won't turn on. In fact it won't do anything - I can't even reset it. When plugged it, it flashes the apple logo every 1.7 - 1.8 seconds. Suggestions?
I had the exact same problem about 10 minutes ago. I was freaking out because I'm going on vacation soon and I was getting all worked up because none of my three power sources were charging it and it wasn't even turning on at all.
I called Support and the automated phone person gave me these steps:
1. Plug the iPod into the computer
2. Set it down on a flat surface
3. Take index fingers and hold menu and center button for about 5 seconds (it actually took me 20 seconds)
It then connected to the computer and turned on. I don't know why trying to reset it normally didn't work but try this and I hope it helps!! -
None of the above have worked. Ipad completely bricked. This began when merely updating IOS software as instructed. Now Apple want to charge me for using their crappy software as directed. Surely this is not only immoral but potentially illegal.
Read: iPad Troubleshooting Assistant
That procedure eventually leads you to the need to restore it.
Make sure you are following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
Use iTunes to restore the device.
If you do not see the "Connect to iTunes" screen, try these steps again. Be patient since it sometimes takes several of these attempts before you are successful.
If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Select the iPad in iTunes and choose "restore from backup". This assumes you have a backup. If you do not, you will have to download all your purchased iTunes content again. You do not have to pay for anything you already purchased.
If you still can't get it to work, you have done all you can and only Apple will be able to help. -
My Ipod shuffle appears in itunes on mac but not on windows 7 even though we have the latest update of itunes. We have also tried the other solutions on the apple support site.
Hi reinkristine86!
I know you’ve said that you have tried other suggestions for troubleshooting this issue, so pardon me if you have already seen this article, but have you tried all of the troubleshooting steps listed in the article below?
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thanks for coming to the Apple Support Communities!
Cheers,
Braden -
Tried everything. Still get "backup could not be saved on the computer". Have iPad 1 and Windows 7 (64 bit) with all latest updates. Now what? Is iPad 1 now incompatible with iTunes?
Have you tried here:
iOS: Troubleshooting backup issues in iTunes
Have you tried deleig the existing backup file? I\You can find it location here:
iTunes: About iOS backups
Saying your tried everything provides us with zero information as to what you did try. -
i try to restore ipad to ios 7.0.4 but the tunes show error ,the ipad could not be restore because the firmware file was corrupt, i have the latest update from itunes and windows and i turn off antivirus and firewall and the error is the same , what i do?, my ipad is show apple logo
please what i doHello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H. -
Pages died today. Just downloaded the latest update 2 days ago. Last night shutting down my very new MacBook Pro Retina, Pages stopped shut down. Today Pages will not open, all my Pages docs cannot open. Help please! Anybody have a fix?
You probably have 2 versions of Pages on your Mac.
Pages 5 in your Applications folder, will open Pages '09 files but will alter/damage them. It can not open Pages '08 files.
Pages '08/'09 in your Applications/iWork folder which can not open Pages 5 files.
When you were shutting down you probably had an unsaved document open.
You probably are opening the wrong versions of Pages to open the wrong document format.
Pages 5 has had over 90+ features removed.
Most users are going back to Pages 09 whilst Apple sorts this out.
Peter -
My Ipad 2 (after the latest update) is burning through battery...even when I am NOT on the Ipad2....I have turned it off and on again....no difference...what else can I try...seems like I live with it pluged into power.
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
recalibrate the battery, let the device run out of battery to where it shuts off and then fully charge it without using it.
Maybe you are looking for
-
Transferring videos from iPhone 4 to MacBook Pro
I need help!!! I regularly import my photos/videos from my iphone 4 onto my macbook pro. I do it through iPhoto, and then export the files onto the hard drive so that I can save in multiple places (hard drive, USB, etc.) Going thru everything toda
-
Hi folks, I have the following scenario: RFC-XI-Webservice. All works fine. I get the request to the Webservice and the response back to the calling abap prog. with the RFC. But one problem: I can't see any XML-message over the XI Monitor SXMB_MONI.
-
I'm trying to create a simple game where you specify where you would like to start in a 2d array, then use directional buttons to move the character around. However, rather than store the value of 's', it stores it's value in the character set.. here
-
Project system configuration notes
Dear all, send me project system config notes Point will be assined venkat1233atgmail.com
-
Photoshop Photography Program paid but not work?
I have paid for PPP but only Lightroom works, Photoshop CC still says that I only have 30 trial ( now is 25 ). What's the problem? Or can I cancel my plan?