TS1538 ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source

ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source

What model iPad do you have? If it's an iPad 1, the battery may have expired and needs replacement.
 Cheers, Tom

Similar Messages

BPM when both sender and receiver systems are Sync. Please help!

Hi Experts,
I want to use BPM when both sender and receiver systems are Sync. For example: web service ---> RFC
I have tried the solution as given in the blog
https://weblogs.sdn.sap.com/pub/u/39730 [original link is broken] [original link is broken]
but it does not work. I am getting Time Out error.
Can somebody tell me the correct way of configuring BPM for sync-sync scenario?
Kindly give the integraion directory steps also.
Thanks
Gopal

Hi Hemant,
I have already tried the solution as given in the blog (https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken])but it does not work. When I run the scenario I am getting Time out error.
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">PL_TIMEOUT</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Timeout condition of pipeline reached</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Please help!
Thanks & Regards,
Gopal

Cannot install Firefox. WHen I click on the link to install, it takes me to an "error loading page" notice. My network connection and internet access are normal with Internet Explorer, so this is not the issue. Some kind of conflict with my settings or pe

Cannot install Firefox. When I click on the link on the Mozilla website, it goes to an "error loading page". My network connection and Internet Explorer are fuctioning normally.
== computer was recently wiped clean and am now reinstalling all previous software and applications ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)

None of the stuff in " http://kb.mozillazine.org/Locked_or_damaged_places.sqlite " helps. I have tried and tried and I have even wipe the computer clean still didn't help. I got the same problem as he/she has got in the first posted. Can add some web pages but not all the web pages I want.. I should have never updated to 3.6.13... That's when it all started for me, from that version..... Now Version 3.6.14 is out, I was hoping the version 3.6.14 might would fix the problem wrong again....
Funny thing is i can not even Bookmark Firefox.com!!!!!...lol
So any ideas on how to fix it other than the link giving would help.
Thanks.

Firefox can't find the file at (a location is specified) when either "Navigate previous" (and next) buttons are pressed in an HTML5 skin (but OK in IE/Chrome).

I create HTML5 help projects from a package called MadCap Flare. It uses what they call an HTML5 'skin' that sets the style/layout of the page and also includes 'Navigate previous' and 'Navigate next' buttons. When viewing the help and pressing these navigate buttons in IE8 or Chrome 32 there is no problem, but in Firefox 27 I get the following: (typical error for pressing a button on any page)
"File not found"
"Firefox can't find the file at /C:/SVN/FlareEnglishOnLineHelp/Output/HTML5_Help_Modeller_Reference/4attrib/idh_jointinterface_element_meshes.htm?TocPath=Modeller Reference Manual|Chapter 5 : Model Attributes|Meshing|_____2."
" Check the file name for capitalisation or other typing errors."
" Check to see if the file was moved, renamed or deleted."
- Because the files and buttons work in other browsers I'm wondering just what is going on here with Firefox>>>>

I should correct that last entry and state that the | charactacters are generated automatically in the Toc-Path for each 'book' name in the online help, and are not something manually created, whereas the : characters have come from the TOC book topic names (which were manually entered names and are what we would ideally require). But, because 'previous' and 'next' topics within nested TOC books without colon (:) characters CAN be browsed successfully when just | characters are present in the Toc-Path, the limitation would appear to be solely due to the : characters.

Firefox on linux gets confused when both 32bit and 64bit plugins are found

On a CentOS6 machines, 32bit plugins get installed to /usr/lib/mozilla/plugins and 64bit plugins get installed /usr/lib64/mozilla/plugins. If both locations have the same plugin installed, such as libflashplayer.so, then 64bit firefox seems to randomly find one first and fail when it sees the 32bit version first. This results in Flash working for some users and not for others .
I can run "strings -a ~/.mozilla/firefox/*/pluginreg.dat | grep usr.lib" and see which users will have it fail because the 32bit path to libflashplayer.so is listed first for them. For the users where it works the 64bit version in /usr/ilb64 is listed first.
I see no way to make 64bit firefox ignore what is in /usr/lib/mozilla/plugins as this seems hardcoded into the binary. I also see no way to make the /usr/lib64 path take precedence as I have MOZ_PLUGIN_PATH=/usr/lib64/mozilla/plugins-wrapped
The output I see on the stderr is:
LoadPlugin: failed to initialize shared library /usr/lib/flash-plugin/libflashplayer.so [/usr/lib/flash-plugin/libflashplayer.so: wrong ELF class: ELFCLASS32]
[8941] WARNING: pipe error (60): Connection reset by peer: file /builds/slave/rel-m-rel-l64_bld-000000000000/build/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 450
repeated many times
It seems to me at least that plugins in a user set MOZ_PLUGIN_PATH should always take precedence over those in a hard coded path like /usr/lib/mozilla/plugins

HI paulraines68,
This may be a question that is beyond the user support of this forum. There are channels I can point you to for feedback or how to submit a bug for this [bugzilla.mozilla.org].
However stackoverflow.com may be the best place for solving the immediate question.

Firefox crashes when the apostrophe and tilde keys are pressed

Pressing either the apostrophe key or the tilde key is crashing Firefox. It's also happening in other internet browsers and programs (like Skype and Google Talk). I've tried a new keyboard and using different USB ports for it. The first time I tried a new USB port it temporarily fixed the problem, but after restarting my computer for updates the issue returned.
Firefox, the plugins, add-ons and drivers are all up to date from what I can tell.

do the crashes occur too when you run firefox in [[Safe Mode]]? (close all firefox windows & press the shift key while launching firefox again)
probably not related - there's a new version of the flash plugin available. you can install it from [http://get.adobe.com/flashplayer/] (disable the checkbox for bundled software)

My iPhone 5 will not sync with itunes. Icon does no appear in left hand column. Both iTunes and the iPhone are running the most up to date updates. Please help.

My iPhone 5 will not sync with itunes. Icon does no appear in left hand column. Both iTunes and the iPhone are running the most up to date updates. Please help.

Is your iPhone connected to your computer using the lightning cable or are you doing WiFi sync?
Sometimes the iPhone doesn't show up in the side bar if you're using WiFi syncing, if its not working, then be connected to your WiFi on your phone and on your computer (Same network) let me know how it's going, if it doesn't work still. Turn your phone off and on again and put in your pass code then try to sync it (keep your phone unlocked and not in sleep mode) tel me if it appears in the side bar.

My Ipad connects with my hotel wifi, but does not indicate that it is a secure wifi, even though it requires a password to access - no lock symbol, hence no password request, hence no internet access - help.

My IPad connects with my hotel wifi, but does not indicate that it is a secure wifi, even though it requires a password to access - no lock symbol appears against the wifi network, hence no password request, hence no internet access - help. My collegue who also has an Ipad can access the same wifi with ease, so it must be something to do with the settings on my machine, although checking the two machines, there appears to be no difference in the settings.

My experience with hotel wifi is that it's an open, and unsecured, connection, but unless you agree to their terms on a launch page, you can't go any further or connect. Sometimes I need to force safari to come up and even make it go to a page, to trigger the auto load of the 'agree to our terms' page.
Unless your machine is work provided so maybe could be blocked from unsecured net access?

I have an iPhone 4S and never had a problem with syncing it. But suddenly, when I connected my phone to my mac, it says that its in recovery mode, and I need to restore it in order to sync. I've updated both my phone and my itunes, and it didnt work.Help?

I have an iPhone 4S and never had a problem with syncing it. But suddenly, when I connected my phone to my mac, it says that its in recovery mode, and I need to restore it in order to sync. I've updated both my phone and my itunes, and it didnt work.Help?

fighter19lisa wrote:
that only makes it say its synced, when its not.
No, it does not. It transfers purchases from the iDevice to the computer. The computer must be authorized for the Apple ID that the content was acquired with.
fighter19lisa wrote:
my playlists wont show up on the phone.
Are they selected to sync? Is Manually Manage content on the device selected?
fighter19lisa wrote:
i had to change my password for my aol account again and i still cannot get my email on my phone to even work
What does that have to do with syncing content to the device? FYI, nothing.

I connected my iphone to the computer to charge it and itunes backed it up with an old version of my ipod so I lost all my photographs. Is there any way I can get them back?

i connected my iphone to the computer to charge it and itunes backed it up with an old version of my ipod so I lost all my photographs. Is there any way I can get them back?

Seems that you can no longer hide them on your phone. Try doing so in iTunes: http://support.apple.com/kb/HT4919.

I have an Iphone 4 which I just updated with the latest software, which put in it in Recovery Mode. It has the picture of the plug with Itunes, I downloaded it now its saying its in Recovery Mode, how do I save all of my previous data without Restoring?

I have an IPhone 4 which I just updated with the latest software, which put in it in Recovery Mode. It has the picture of the plug with ITunes, I downloaded it now its saying its in Recovery Mode, how do I save all of my previous data without Restoring?
I updated the phone before backing it up on iTunes, now the update wanted me to connect the phone with iTunes and it says the phones in recovery mode and it must be restored before its used with iTunes. I go to click restore and it says it will reset it to factory default and I'll lose all my current data. I have all my sons pictures and videos along with this notes. I can't lose all of this data! Please help!

You have to restore the iPod, no ifs, ands, or buts...
After iOS is installed you will be asked if you what to set it up as a new iPod or if you want to restore from a backup.
If you have a good backup you can restore that and you're good to go.
If you don't have a good backup, then you end up with a "clean" iPod....

When I plug my iphone in to synch with itunes the summary screen doesn't come up. It starts synching everything. I only want to synch music.

When I plug my iphone in to sync with itunes the summary screen does not come up. I only want to sync music. It starts synching everything.

Disable automatic syncing.
Whatever is selected under the various tabs for your iPhone sync preferences will go through the process of being checked - if there are any changes in regards to the data you have selected to be synced with or transferred from your computer regardless.

Western Digital My Book World EditionI have bought a WD My Book World Edition to use for back-up of my iMac, but when I try and log onto the drive with Apple time Machine (back-up software) or connect in any other way i get the message 'There was a proble

I have bought a WD My Book World Edition to use for back-up of my iMac, but when I try and log onto the drive with Apple time Machine (back-up software) or connect in any other way I get the message 'There was a problem connecting to the server "MybookWorld.local" The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem'
It is a brand new iMac and running Lion OSX
Any ideas on how to solve would be gratefully received?

Followed the directions on this page and it worked!
http://forums.macrumors.com/showthread.php?t=1102423
Part One - Turn on SSH (in the admin panel)
[1] Go to to http://mybookworld.local
[2] login: username will be admin, password will be whatever you have setup. If you can't remember it should be in your Mac OS X keychain (Utilities > Keychain Access, search for "mybookworld"). If you have not changed if from the default the password will be admin as well.
[3] Switch to advanced mode.
[4] From the System tab, pick Advanced.
[5] Enable SSH Access, and click submit.
[6] Click on the network tab and then the LAN button
[7] Make a note of the IP address
Small, maybe obvious, but nevertheless important point: For the install to work, your NAS needs to be connected to a router with internet access.
Part Two - Install netatalk2.2
[8] Open Terminal.app (Utilities > Terminal)
[9] Enter the following command (substitute in 127.0.0.1 for the actual IP address you noted down in step 7), then hit return:
Code:
ssh [email protected]
[10] When prompted, enter the ssh password (will be welc0me).
[11] You are now going to download the installer. Enter the following command, then hit return:
Code:
wget http://mybookworld.wikidot.com/local--files/netatalk2-2-on-whitelight/install_netatalk.sh -O install_netatalk.sh
[12] Once completed, you will need to run the installer. Type:
Code:
sh install_netatalk.sh
[13] You will be asked a number of question during install, answer yes to all. When asked about the "DHX2 login process", I opted to install the modified version, so I can confirm it works.
[14] Once the box has restarted, you should be able to connect to your afp shares and continue to use Time Machine.

Hİ My ipad's screen is black. When it take charge, I can hear sound but still black. I press and hold both the sleep and home buttons for about 10 to 15 seconds but this doesn't work. Screen still black! PLS HELP ME!

Hİ
My ipad's screen is black. When it take charge, I can hear sound but still black. I press and hold both the sleep and home buttons for about 10 to 15 seconds but this doesn't work. Screen still black! PLS HELP ME!

How long did you let it charge? It may take 30 minutes before the iPad responds when the battery is completely drained. Let it charge for at least 30 minute using the wall charger. Then rest the iPad. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.
If the iPad restarts let it continue to charge until the battery is 100%.
If the iPad still does not start make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

TS3988 I just bought a Iphone 5 -- my Iphone 4 and my ipad used to automatically sinc calendars via the Icloud whenever I entered anything on either device -- I can not get the new phone to do this.I have check the settings on both devices and they seem

I just bought a Iphone 5 -- my Iphone 4 and my ipad used to automatically sinc calendars via the Icloud whenever I entered anything on either device -- I can not get the new phone to do this.I have check the settings on both devices and they seem to be t

There are only two things that you must do to connect a device to calendars:
1) In settings>icloud, you must log in, WITH THE CORRECT ID/PASSWORD, and
2) Turn on calendars on the same page.
You said that the iphone 4 and ipad **used** to automatically sync. Do they no long sync?

TS1538 ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source

Similar Messages

Maybe you are looking for