TS1538 iPhone 5 and Windows 7 device driver not being recognized

I've de-installed in the correct order and re-installed all Apple software for Windows 7 x64 box.
I've manually added paths to the device driver.
I've re-scanned device manager.
I've gone through 4 different kbb articles.
Used 4 different USB ports on the Front Panel of this box.
I've restarted, stopped, started the Apple Mobile Device Service.
I've rebooted 15x, my Alienware R3 laptop works just fine.
I can see the iPhone 5 in iTunes, and this problem has been occurring with my iPhone 4.
Devices and Printers lists the iPhone and Apple Mobile Device USB driver without any conflicts on the exterior.
If you go into properties boom Unvailable. I've turned off every shield in Avast. I only have 1 A/V.
What else can I do?
The rig is a custom built i7 3770s, MSI motherboard, 16gb DDR 3 RAM, USB 3 support etc. I've tried everything... why won't my iPhone get recognized? I seriously do not want to wipe the box for a device driver. Does RDP software create conflicts with USB devices? I have a couple installed.

Hi Allan,
I am using 11.0.4.4 version of iTunes.
Nilay

Similar Messages

  • HT1386 Since installing the latest itunes to windows 8 my iphone and ipod touch is not being recognized in itune

    Since installing the latest itunes to windows 8 my iphone and ipod touch is not being recognized in itunes, therefore i can't change playlists or add songs etc. Is this a fault with itunes as it was fine with the older version or is there something i can do. I'm not on IOS yet but would like to backup my phone first but can't do that atm due to not being able to view my phone on itunes!
    Thanks

    Hi, jodie_0182.
    I would recommend the steps in the article below.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If the above step does not resolve the issue, try all remaining steps in the article. 
    Cheers,
    Jason H.

  • My music app wont open and my device is not being recognized

    i have an ipod touch 3rd generation and my music app wont open. i click on it and it will close. i can't play any music. Also if i hook it up to my windows vista , itunes would say, can not use because apple mobile device has not started. so i went to the control panel and started it and now nothing shows up in itunes. I can access the ipod through auto play on my computer. any ideas

    I need help, my itouch can not be recognized in Itunes.

  • HT1925 I cannot seem to delete apple soft ware from C/: program files/ common files...apple. It says I need permission, while I am the administrator. This seems to be interferring with my reinstallation of itunes. Currently my devices are not being recogn

    I have been trying to remove all residual apple files from my computer in order to fully reinstall iTunes. My devices are not being recognized by iTunes currently. I keep finding an Apple file under C/: Program files/ common files/ ......Apple.. under that there is an Internet Services file folder.. I am the administrator and yet it says I need permission to remove these files.
    Please advise.

    See Troubleshooting issues with iTunes for Windows updates for some tips on cleaning up... Unlocker might be the tool in this case.
    tt2

  • Seagate portable drive not being recognized after OSX10.9.2

    After I installed the 9.2 update, my Seagate portable external drive is not being recognized - doesnt show up in Finder, or Disk Utility, but I know the drive is live, as I can feel it vibrating
    Someone please help, all my time machine backup is on that

    I had the same issue - the Seagate drive is in a format that will recognize both Windows and Mac formats and there seems to be a flaw with Seagate.  After working on this for five hours and finally calling Apple, I found out why.  If you reformat to Mac OS extended journaled then they usually start working properly. 
    When I contacted Seagate they said it was best if you are just using a mac to just use the Mac formatting.
    Hope this helps and good luck.  Hope there wasn't any valuable data on the drive.

  • Hard drives not being recognized on Server 2012 R2

    Hi,
    I added 2 hard drives to my server but they are not being recognized by the operating system. They show in the bios but no where in the OS do they show. They used to be external hard drives but I took the hard drive out and installed them into the server.
    Are there some type of drivers I need to download for them to be recognized? One of them will be shown but it tells me I need to reformat it. I don't want to do this since I have about 1TB of data on it.
    Thank you,
    James

    What server hardware is being used? May need the manufacturer chipset and support pack in the case of integrated disk controller.
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Hard Drive not being recognized on my Graphite Clamshell

    I have a challenge for anyone. I have a ibook 366(clamshell) that is not recognizing the hd. It was working wonderfully one night I shut it down and the next day I get the flashing question mark. I've tried all of the normal stuff: zap pram, reset nvram tried to use command and s but it didn't go to the programmers screen and all the such. I can boot from a cd but none of the utilities see the hd. I have taken the hd out and connected it to a usb to ide cable that allows me to use it as an external drive and it is recognized without any problem on all of the other macs I connect it to and even on a pc (I know I said the bad word.)Does anyone have any clue what could be the issue. Every thing else seems to work fine. Just the hd is not being recognized. I even put in a different hd. I even formatted the drive using one of my macs that I only have 9.2.2 on and installed a os on it and it still didn't work. The hard drive worked fine and the os with all of its components seemed to be fine. I know it's an older system but it's something that I can let the kids play on and not be concerned with losing any of my files.
    I appreciate any help
    iBook 366 Graphite    

    Duane, Thanks for your reply. Is there any way to test this? I am going to try to see if any of the utility disks can recognize the hd. I've tried DW 4.0, the Utility Disks on OS 9, X. I've even tried FWB and a few other tools.

  • Acomdata 500gb External FW Drive NOT BEING RECOGNIZED!!!

    I have been running an Acomdata 500gb FW External Hard Drive for my data intensive applications such as FCP and it has been working flawlessly for about the last year...
    Yesterday I powered up the Mac and turned on the drive along with my external USB drive and the Acomdata drive turns on, lights up, and makes noise like it's working, but it is not being recognized at all by the Mac. I tried unplugging it, switching out the FW cord, changing the FW slot it was being plugged into, and everything else of that nature that I could think of. Of course the USB drive that has non-important work related stuff works just fine :/
    So I'm wondering, does anyone think the drive has officially crapped out? It turns on and works so I can't tell. I'm PRAYING this is not the case, but I didn't know if there were any possible FW configuration settings that could have been changed or something like that. Any ideas?

    Did you recently update to 10.4.10? Is there another computer that you can plug the external into to see if it's recognized? Have you tried plugging another FW peripheral into your main computer to see if it recognizes it?
    Some people have had good results from the following:
    1. Downloading and installing the combo updater of the system software update they've just applied via "Software Update...". In your case the update you need is at:
    10.4.10 combo updater
    2. Another trick is to restart each by zapping the parameter RAM:
    Zapping the P-RAM:
    After the startup tone, hold down <commandd><option><r> until 3 additional startup tones are heard, then release the 4 keys.
    3. A 3rd tip would be to do Open Firmware resets on each:
    After the startup tone, hold down <command><option><o><f> until the text screen is visible. When text can be entered, type the following commands, followed by the <return> key (there are no space characters in each command):
    reset-nvram
    set-defaults
    reset-all (the Mac will boot up after this command is entered).
    Also, see if anything in this Apple KB article helps:
    http://docs.info.apple.com/article.html?artnum=88338
    Please post back with results,
    Miriam

  • I have windows XP and last night i updated my ipod touch and this morning its not being recognized by itunes OR the computer... Can someone PLEASE help me... This is my life!

    i updated my ipod touch last night and woke up to the default screen from when you FIRST buy one and they tell you to sync it with itunes. It was recognized last night and now it isnt at ALL. I Really need some help... This has been frustrating me all morning. I would really appreciate it

    - Try manually placing the iPod in recovery mode. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    - Next, try placing the iPod in DFU mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • External Hard Drive not being recognized

    I made a topic some time ago but it never got answered.
    http://discussions.apple.com/thread.jspa?threadID=1906969&tstart=0&messageID=906 6822#9066822
    This hard drive has never worked on this computer and I am still not sure why. It does not show up in Disk Utility or in the System Profiler. It is formatted in FAT32. It is plugged into the wall and comes right up in Windows. As a test I used bootcamp and went into Windows XP. Plugged it into the same USB slot on the side and it came up. But upon rebooting into OS X it was no longer recognized. I actually got it to come up one time by opening USB Probe. After unplugging it and plugging back in, it no longer worked. I don't know what I did that one time but it will not come back. The time I had it running I moved files around to make sure it was working and it seemed fine. Does anyone know what I could do to get it working?
    Model: Acomodata Model HD250UHE5-72
    Thank you very much.

    eddiefb3 wrote:
    It has an external power source that plugs into the wall. As for the model,
    Acomodata Model HD250UHE5-72
    OK. They're supposed to be Mac compatible.
    I guess you could see if it at least is recognized by the operating system even if it doesn't mount. You can open System Profiler in Utilities (or About this Mac > More Info...). The USB device tree should be under Hardware > USB.

  • External Hard Drive Not Being Recognized By MacBook

    My Toshiba external hard drive (1TB, brand new) does not show up anywhere on my MacBook Pro (Also brand new). The light on the external hard drive comes on so it's not a connection issue, like the cord being broken. But nothing happens when I plug it into my MacBook, aside from the light coming on. It doesn't pop up on the desktop or in disk utilities or finder. I don't have my old PC laptop any more, all my files from that computer are on this hard drive and all I want to do is transfer them to my MacBook. And even though I don't want to lose any of my files, I can't even erase anything on the external hard drive to reformat it because it's like...not talking to the MacBook...

    Your Mac should be able to recognize many different types of drives (including Windows-formatted drives) immediately for Reading, provided they are in good working condition and not damaged. There should be no need to transfer to a different type of drive.
    If there is no recognition of this drive, see if it can be seen in Disk Utility.
    If your aim is to transfer the data on it DO NOT use ERASE or PARTITION as these will completely erase all the information on the Drive.
    If the drive is present while the Mac sleeps, it is likely to drop out and not be seen any longer, especially if it is a USB-powered drive.

  • External hard drives not being recognized by Lr4

    When I hooked up my two external hard drives to my computer this week, Lr4 is not recognizing them. Each folder has a question mark by it.
    Appreciate any help..thanks!

    Hi Jim,
    I spent some time doing maintenance on Lil's computer.  We were on public networks for 10 days and so I ran some cleanup software to help ensure that we don't have some virus or other malware messing things up.
    Then I did some comparing and it appears that Lightroom has the G and H drives reversed.
    I have enclosed 4 screen shots.  Two show the strong(but not perfect) correlation between LR drive G and Explorer drive H........and vice versa.  Another shows the K drive and the fourth shows the G drive one level up as you requested.  I believe that when we disconnected this computer to take on vacation that we just pulled all the plugs and did NOT take any steps to "logically" disconnect them.  If LR is sensitive to drives just being removed by pulling the cable, then perhaps that contributed to this situation...although I believe that we used the same procedure in the past.
    Thanks,
    David Polley

  • External Hard Drives not being recognized

    I have 3 external hard drives. Had them for a long time now. I recently made only one change: I decided to start using the 'sleep' mode.
    I noticed the sleep mode and external hard drives didn't get along real well, so I simply took the externals (used only for backing up data) and turned them off.
    Its now been about 2 weeks, time to fire them back up and backup my data. Only one of the 3 is being recognized. The other two seem to come on, make the usual whiny noise and such, but aren't seen in the finder.
    I've tried restarting my computer, turning off/on the hard drives, unplugging/replugging them from power, unplugging/replugging them into USB. I've verified connections, that kind of thing. Nada.
    Any ideas on what to do to help my computer 'see' that they are there? this is a bit baffling to me and disconcerting, to say the least. I've never had problems with my computer recognizing the externals before.
    Ideas are appreciated.
    PowerMac G4 1.42 duel   Mac OS X (10.4.6)  

    'sleep mode' ?
    Do you mean the drives are triggered to not spin up for a period after powering on ? This is a feature designed for enormous banks of drives, so that when they are powered on, only a fraction spin up immediately, then another set, usually 12 seconds later, then another set, etc, until all are up to speed. This is reduce the power surge from spinning up 700 hard drives simultaneously in a commercial solution.

  • Sony IDE DVD Drive not being recognized

    Motherboard : P7n-SLI-FI
                        MS-7380
    I recently upgraded my computer a bit with this new motherboard, ram, video cards, power supply. I used my older dvd drive that was working in my last computer. It is currently connected via IDE ribbon, but it does not show up in my computer or when I put in a CD does not auto run.
    The unit does have power to it ( The eject button works, light on front blinks a little )
    In BIOS I tried changing the IDE primary from AUTO to DVD/CD Drive and it still did not work.
    Any suggestions ? Buy a new dvd drive that is SATA ?
    Thanks

    Also check the jumpers on the IDE optical drive so as they are set in Master mode as its the only IDE device in the system, assuming that you have a SATA hard drive, or if your hard drive is also an IDE one then you have to set the jumper to run as a Slave mode.

  • USB flash drive not being recognized as a startup disk?

    Hi everyone, I've been searching for similar questions but haven't found one that exactly matches my experience.  So, I'm going to try and explain my issue in hopes that others may be able to help.
    I'm trying to create a bootable flash drive from which I can install lion, and eventually Mountain Lion when it is released onto my main hard drive.  My main reason for doing this is  to have a way that I can perform a clean install of the operating system.  Yes, I know I am old fashioned, but sometimes I prefer clean operating system installs rather than upgrading.  In any case, I have downloaded the lion setup file from the Mac app store (Install Mac OS X Lion.app) and am following the directions given on this page to do this procedure.  These directions are consistent with directions found on various other sources online.  Having this file saved to my hard drive, I was able to find and extract the disk image file from the package InstallESD.dmg to another folder.  Once extracted, I plugged in my flash drive and attempted to use disk utility to restore the disk image to my flash drive.  I selected the dmg file as my source and the flash drive as the destination.  I then clicked restore and was warned that all data on the flash drive would be erased while the disk image was restored to my flash drive.  I was prepared for this, so I allowed the process to continue, and it appeared to proceed with no problem.  When disk utility was finished, I did a quick look at my flash drive using finder and confirmed that it did in fact appear to contain a disk image of the .dmg file.  Here's where things get interesting however.
    When I go to system preferences and choose startup disk, my flash drive is not listed as an optional disk from which to boot, only my hard drive ("macintosh HD").  When I restart and hold down the option key, my flash drive is not listed as a startup disk either.  I know that the non-intel based macs are not capable of booting from USB, but this is certainly not my issue as I have an intel macbook pro, mid 2009 model.  My flash drive is about 4 or 5 years old; it is a PNY Technologies Attaché 16 gb flash drive.  I have no trouble viewing and transferring files to and from the flash drive, the only issue is that my computer seems to refuse to recognize it as a startup disk.  Are there certain flash drives which do not support booting?  This would normally seem more like a computer issue rather than a flash drive issue, but most people seem to have no problem doing what I'm trying to do.  Unfortunately I do not have another flash drive with which to test this, and I didn't really feel like buying another flash drive just to test this out if in fact this is not a flash drive issue.  I am planning to upgrade to the macbook pro retina soon which of course does not have an optical drive, which is one of the reasons I would like to get this working.  Can anyone think of something else I can try?  Is it more likely an issue with the macbook pro or the flash drive?
    Thanks in advance for any thoughts.

    The format says Mac OS Extended.  All of the settings were set during the disk image restore process.  Even if I format the flash drive as extended journaled or some other format, all of these settings are reverted when I do the restore from the disk image.  I will just copy all of the information that disk utility has so that you can see it.
    Mount Point :     /Volumes/Mac OS X Install ESD     Capacity :     16.11 GB (16,106,110,976 Bytes)       Format :     Mac OS Extended     Available :     12.3 GB (12,303,499,264 Bytes)       Owners Enabled :     Yes     Used :     3.8 GB (3,802,611,712 Bytes)       Number of Folders :     128     Number of Files :     876

Maybe you are looking for

  • Help!!  I accidentally deleted ALL my calendars!  How do I restore them??

    I finally upgraded my older laptop to Lion.  Thus, I got iCloud on it.  When I told it to sync calendars, it asked if I wanted to merge with iCloud.  It was the only option if I wanted to sync.  So, I clicked "merge".  That was fine, but it duplicate

  • SB Live 5.1 for Dell Vista driver questi

    I've been reading this board and though many Sound Blaster issues are covered on it I don't think the specific issues I am having were discussed. Pardon me if they were. I have a Dell Dimension 4600 with the SB Li've 5. card for Dell. After updating

  • Wont Install Completely

    This is what I'm getting when trying to install. Any suggestions? ERROR: DF015: Unable to delete symlink "/Applications/Adobe Photoshop CS6/Adobe Photoshop CS6.app/Contents/Frameworks/amtlib.framework/Resources"(Seq 524) ERROR: DW063: Command ARKDele

  • People cannot hear me... but I can hear them

    I am having a problem with my phone, when people call me, I can hear them, but they cannot hear me...any suggestions.  I have restored my phone and I am still having issues.

  • Import of QuickTime HD 1080i -- sound is missing

    Where has it gone today? In Mediaplayer it sounds nice. Audioformat of source is 44 100 Hz --16 bit --stereo, audioformat of project is 44 100 Hz -- 32 bit floating point -- stereo. What now?