TS1538 My iPod Touch isn't recognized in itunes.

My ipod touch isn't recognised in iTunes on the computer I always use to sync music onto it. (I can't see "Omar's iPod" in the left column.)
When I plug it in and I open up iTunes, the device isn't shown.
However, the device is shown in My Computer.
When I plug it into other computers, iTunes recognises my device. (I can see "Omar's iPod" in the left column.)
I've tried every method, except for Recovery Mode because I don't want to lose any of the files on my iPod.
I've done every method in the Apple trouble shooting manuals.
I need iTunes to recognise my device, help please.
- Omar

Try Here...
iPhone, iPad, or iPod touch not appearing in iTunes

Similar Messages

  • My ipod touch isn't recognized in itunes, what can I do?

    my ipod touch isn't recognized in itunes, what can I do?

    iOS: Device not recognized in iTunes for Windows - http://support.apple.com/kb/TS1538

  • My ipod touch isn't recognized by itunes or windows after ios5 update

    I did the update for ios5 on windows, and the computer said the ipod reload wasn't complete, but the ipod said it was complete.  Now my ipod is not recognized by itunes or windows.  Any suggestions?  Thanks!

    Try here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • IPod touch isn't recognized by iTunes

        My iPod Touch 4th gen is exactly a year old. Today I tried to plug it into iTunes but it was not recognized. Not only was the iPod not connecting to iTunes, but it was not charging either. It is not the computer, I have tried both of my macs. It is not the cord, I have tried two different cables which don't work. I have tried both cables on my old iPod nano and they work fine. In addition the cables work when charging the iPod touch through a wall charger. I'm thinking the problem here is the iPod...? Please help me out!!!

    - Try resetting the iPOd,
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Next try placing the iPod in recovery mode nd then restore vi iTunes.  Noe that if iTunes does not see the iPod the iPod will not work. For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • TS1538 My iPod Touch is not recognized in iTunes and not seen in My Computer (Windows XP) either.

    My problems began whe I got the notice that iTunes 10.6.3 was ready to update.
    I have a iPod Touch 3rd Gen.
    I have followed all of the troubleshooting steps. I have uninstall all of my security software.  I have followed the steps to uninstall itunes and all of the other programs in order. I have re-installed itunes multiple times.
    I noticed that the Apple Mobile Device USB Driver is not listed under the Device Manager. However, when I follow the directions to "Update the driver" I can navigate to the usbaapl.inf driver file but when I hit the OK button to install I get an error "The specificied location does not contain information about your hardware" and it will  not install the usb driver.
    What do I do now???  Any suggestions?

    Try recovery or DFU mode.
    Basic troubleshooting steps. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

  • My Ipod Touch isn't recognized by Itunes or Windows. (using Vista) I have tried Apple's reinstall, it didn't work.

    I have tried Apple's reinstall, it didn't work. There aren't any other devices in any USB port. Using the same USB connectorcable and port, my computer and iTunes will recognize my friends exact same model of iPod touch (4 gen). Any help? It is a new iPod, never before connected to any computer.

    Yu can try placing the iPod in Recovery mode and then try restoring via iTunes. The problem is that if you can't restore your iPod may be bricked
    Next would be to try DFU mode. this may also brick your iPod if it can't be restored.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Make an appointment at the Genius Bar of an Apple store.

  • My 3G iPod touch isn't recognized by iTunes.

    I've reset the iPod, completely uninstalled and reinstalled iTunes, and did the same with the driver software. ITunes recognizes my 2G iPod touch but not my 3G. The driver software installed itself as a digital camera software instead of where it should be. I've tried everything I've been able to find and it still won't show up. I went through all of the troubleshooting stuff too.

    If you have iTunes 11 and are using the same cable that works with the 2G iPod.
    - Try on another computer
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar      

  • My iPod touch isn't recognized in iTunes, can't sync

    when I try to sync my iPod with iTunes the Sync option is grayed out.  There is no Sync in the bottom of the screen.  I have stopped/started AMDS, uninstalled and reinstalled iTunes.  My computer recognizes the iPod but I just can't sync the new songs I just loaded into my library onto the iPod.  Help please!

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    - Try on another computer to help determine if computer or iPod problem

  • My iPod touch isn't recognized by iTunes, but it is recognized by Windows.

    I'm using Windows 8 and it worked okay for a while. I have uninstalled and re-installed iTunes without success.  It works fine on my other computer (desktop Windows 7). Thanks for any suggestions
    Jim McColl

    Thanks for quick response. After I did the post I kept looking and stumbled upon the site you refer to. I tried a variety of things such as stoping and starting AMDS, re-installing iTunes etc. etc. Finally what I did was remove every vestige of  Apple software, restarting the computer and re-installing iTunes. I was very pleased with the result as not only does it now see my iPod but my library is totally intact including playlists, so no re-building required.
    The link that species these procedures is below.
    http://support.apple.com/kb/HT1925?viewlocale=en_US
    Regards
    Jim McColl

  • Ipod touch isn't recognized on my machine but is on my other pc   :o(

    I have been unable to get my Windows XP service pack 3 machine to recognize my ipod touch since 12/24. Prior to that I've successfully linked and synced since May. I've tried all the solutions mentioned on the Apple site several times including unistalling and reinstalling itunes, trying all my different USB 2.0 ports, powering ipod and pc down and back up again, resetting my ipod and so on. I've unplugged all other usb devices and tried it. I also have a firewire port and it doesn't work there either. (It had previously) I've stopped and started my Apple Mobile Device services and watched as the Apple Mobile Device USB driver activates as soon as I plug my ipod into a USB port. What happens then is that Windows reports that "An iPod has been detected but it could not be identified properly. Please disconnect and reconnect the iPod, then try again." A dozen times later it's still saying the same thing. (For a time Windows thought it was a camera, but somewhere I found how to turn that off.)
    What's wierd is that my old ipod and itunes get along fine when I plug that one into the same USB port on my PC. iTunes identifies the old iPod and it syncs perfectly.
    Also wierd is if I connect my new ipod touch to my wife's PC, itunes and the ipod touch sync successfully as well.
    I've gone so far to reinstall Windows to a version in October, back when my ipod touch was working perfectly but still no luck.
    I don't know the fix but as far as I can tell my Windows XP machine is unable to identify the ipod touch but it has no problem identifying my older ipod.
    Does anyone have anything they could suggest? I'm going through ipod withdrawl!

    Try here:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    If the iOS is 4.1 or greater you need iTunes 10 and that requires OSX 10.5.8 or later

  • My ipod touch is not recognized on itunes and will not turn on or give me the battery sign. I have tried toubleshooting it by holding down the home button and the sleep/wake button, but it doesn't work. What do I do to fix it?

    My ipod touch is not recognized on itunes and will not turn on or even give me the battery sign that it is dead. I turned it off and it won't turn back on now. The screen is completely black and won't do anything. I have tried charging it over night and nothing happened. It was never near water. I have tried troubleshooting it by holding down the home button and the sleep/wake button, but nothing happened and it didn't work. What can I do to fix it?

    Device Not Recognised
    For PC
    http://support.apple.com/kb/TS1538
    For Mac
    http://support.apple.com/kb/ts1591

  • My ipod touch is not recognized by itunes on my laptop.

    My ipod touch is not recognized by itunes on my laptop, it has windows 7. I have already done the troubleshoot process and the "msconfig" process as well. What could be wrong?

    http://support.apple.com/kb/TS1538
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • TS1363 My sons iPod touch is not recognized by iTunes, or windows.  Is this repairable?

    My sons iPod touch is not recognized by iTunes, or windows.  I have tried a variety of options, even resetting, but still no luck.

    What does the iPod's screen say or do, when you connect it to USB port on the computer?
    The article referenced is for "regular" iPods.  An iPod touch is an iOS computer, so this article would be more appropriate for troubleshooting.
    http://support.apple.com/kb/TS1538
    Be sure to rule out a faulty USB cable as the cause.  Try another cable, or try the cable you have with another device that has a dock connector.
    Also, you should do this test to rule out a problem with the USB port (such as lack of power or USB device conflict).  Shut down (power off) the computer and disconnect all USB devices, including any hub, except for standard keyboard and mouse (if normally used).  If the computer is a laptop, connect its power adapter (so that it's not running on battery power). 
    Then, start up the computer, run iTunes, and connect iPod to a direct USB port on the computer.  If it still does not connect, connect something else to the same USB port to confirm it is working.  Preferably, use something similar, such as a USB flash drive or external drive.

  • My ipod touch isn't connecting to itunes and takes all night to fully charge what should i do?

    my ipod isn't connecting to itunes but still manages to charge but it turns off while charging and takes all night what should i do?

    Try:
    - Reset the iPod. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    - Try another cable
    - Try another charging source and computer.
    - If iTunes sees the iPod restore the iPod.

  • HT1923 I had Windows 7 and Itunes recognized my Ipod Touch with no issues.  Now that I've upgraded to Windows 8 I can't get my Ipod Touch to be recognized by Itunes.  Any suggestions?

    I can't seem to get my Ipod touch to be recognized by Itunes now that I'm using my new upgraded Windows 8 Pro.  Has anyone else experienced this problem and do you have a solution?
    Thanks.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for

  • Open a new window of the brosewr in a pl/sql portlet

    I am designing a pl/sql portlet that the inserted thing in a page of portal and that on having executed opens the page of beginning of an own application of my organization. I want to open this page in a new window of the mariner(browser) but that fa

  • Re: DW CC The usual choices for the Workspace Layout are missing. How can I restore them?

    The usual choices for the Workspace Layout are missing. How can I restore them?The usual choices for the Workspace Layout are missing. How can I restore them?

  • Refreshing access points in the environment, models???

    I am slowly going through the environment replacing the 80 AIR-1252 access points.  I have decided to replace our 1142s at the same time so that the environment is up to date.  I was curious what the recommended replacement is for these access points

  • Filter issue in fiscal period (urgent).

    Hi all I am facing issue on fiscal period in Query. Please find the case and guide me to solve this issue. Case: I am using 0fiscper in my report. when we try to keep filter on on 0fiscper in Bex Analyser It is working fine for SIngle value and Betwe

  • Color and Color3f

    I am using a color chooser in my program..I am trying to pass this Color object as a paramete to a function to change the background color of the scene..In java 3D I have to use Color3f..how can I use the Color object instead of it?? thanks for any h