TS1538 my ipods appears under my computer when put into disc mode but not in itunes, i synced it yesterday but now it wont sync

my ipod appears under my computer when in disc mode, synced it yester but not today

"my dad pressed view and then he chose the 3rd picture thing and songs went into."
Sorry, I don't know what that means.
Have you had a chance to look through these?
USB drivers are not installed properly or are out of date.
iTunes 7 doesn't recognize the iPod.

Similar Messages

  • Sad icon = computer does not detect = cannot put into disc mode !

    hey,
    my ipod photo at the moment won't turn on. the best i can do is plug it in to either my pc or the electricity supply, or reset it, so the apple logo comes up, however it only lasts for a few seconds and the sad face icon appears, directing you to www.apple.com/support.
    i tried the first 4 r's and got onto the restoring one. but the updater will not detect the ipod. i think it is because my ipod is not in disc mode, but i cannot put it into disc mode - i can do the first step and resetting it, but then when i click the play/pause button and the select button nothing happens.
    this problem has severly cheesed me off, and am very desperate to have a working ipod again!!!! please please help if you can!!!!
    thanks a lot, leon

    Hello,
    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/ipod/download/
    http://www.apple.com/itunes/download/
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iPod Updater and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iPod Updater and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“Partition Magic”.
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iPod updater.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
    http://www.ipodresq.com/index.php
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning ! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
    http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
    2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
    http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
    Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    What should I do with my iPod? Send it or keep it?
    http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    Sad iPod solution
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Re: try to restore ipod and it says "can't mount ipod"
    http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
    iPod making clicking noise and is frozen
    http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.

  • Ipod appear in my computer when disconnected, doesn't appear when connected?

    It's impossible to add songs to my ipod because when i connect the ipod the taskbar says it's connects however it doesn't appear in itunes or in "my computer". In addition to that it takes million and a half years to eject it from the task bar. I've managed to disconnect it properly maybe twice. at first i thought it was that the drivers need to be reinstalled. but after waiting for an entire day for it to respond i disconnected it improperly and suddenly the ipod icon appeared in my computer and actually stayed there for a while while the ipod was disconnected. as soon as i reconnect it the ipod disappears. im thinking the computer is slow to respond to it since it immediately opens itunes when i disconnect it after waiting for hours.

    The USB host controller maybe hung by the Antivirus or a slow CPU, with low RAM.
    Antivirus has a tendency to freeze iTunes sync Operation with iPod Classic, causing a timeout, which corrupt your iPod filesystem, so when iTunes can't read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
    My suggestion.
    Connect your iPod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete.
    Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
    Stop the Antivirus program
    Connect your iPod to the PC, using a high speed USB 2.0 port at the back of your PC. (don't use USB hub or the USB port at the front of your PC).
    When iTunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
    When Restore complete, eject the iPod and reconnect again.
    Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well.
    When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
    Good Luck!

  • No episodes (new or old) appear under any podcast when I am trying to download them through itunes on the iphone

    When you the iphone, not the computer, when I open Itunes and click on podcasts, any podcast I choose doesn't list podcast episodes. When I search for a podcast then click on the icon all it shows is a link to reviews and "more from this provider". The list of episodes has disappeared. I've tried several different podcasts and they are all the same. Please help! Thank you very much for your time.
    P.s. I have done a full restore through Itunes and it didn't fix the problem. Almost like a setting has gone wrong somewhere...

    ***SOLUTION FOUND***
    I started the other thread on this and @sytrash posted the fix (or work-around) in that thread...
    https://discussions.apple.com/message/16019771#16019771
    ...JUST SCROLL DOWN.
    They're THERE... just off the screen... down the page!.

  • Shuts down when put into sleep mode

    Any idea why this is happening?
    When my ipod touch locks itself or if I put it into sleep mode, it will not wake itself up with the press of a button - instead, it restarts (black screen with apple logo in centre).
    It is only 12 hours old and was perfectly fine when running on the factory 1.xx software, it has only started happening since the 2.1 software was installed.
    Since, I have Restored it through iTunes which performs another clean install of 2.1 and it is the same still
    Weirdly, while it is connected to my PC through the USB cable, it behaves perfectly (waking up from sleep instantly with the press of the home button), but as soon as I disconnect it from the PC, it starts playing up again.
    If I set the settings to never lock, it performs brilliantly which is annoying as I now have a taste of what this device can do, but I just cant put it into sleep mode.
    Any ideas on what I need to do? Or is it a case of returning it to Apple?
    Thanks for any response
    Message was edited by: Agent-Trig

    Is the battery FULLY charged? If not, charge it and then see how it reacts...make sure Wi-Fi is off while you do this--I've noticed weird things when it's docked and plugged into my TV (with the new dock) and wi-fi is on--I get battery messages randomly and it eventually shuts down (even though it's plugged into a dock with power, that came from Apple and is the "latest and greatest"...)

  • MacBook Pro shuts down when put into sleep mode

    Every time I put my Mac into sleep mode (plugged in or not, charged or not), it shuts itself down, and I have to restart it. I just got it (brand new) in August, so I know the battery shouldn't be bad.
    It's been doing this for about a week... I just changed to Snow Leopard yesterday, and downloaded the software updates and everything, but it still shuts down.
    Anyone know what I can do (short of sending it to Apple) to fix this?

    Okay, well I already used smartsleep.
    It fixed the problem I was having, but now my macbook started having the same issues again this weekend. It's happened twice tonight in the span of 3 hours.
    Do I need to uninstall SmartSleep then?
    And here is the report I get when the macbook reboots:
    Interval Since Last Panic Report: 4800 sec
    Panics Since Last Report: 1
    Anonymous UUID: 47604936-AB69-4BB8-A247-0865F4F970CA
    Mon Oct 5 22:23:12 2009
    panic(cpu 1 caller 0x9c6824): NVRM[0/2:0:0]: Read Error 0x00000004: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xe4000000 0x58dd7000 0x096380c1, D3, P1/4
    Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
    0x58723668 : 0x21acfa (0x5ce650 0x5872369c 0x223156 0x0)
    0x587236b8 : 0x9c6824 (0xba092c 0xc01d20 0xbabbf0 0x0)
    0x58723758 : 0x15272ba (0x8d59804 0x8adf004 0x4 0xf02e11)
    0x58723798 : 0x1529d8b (0x8adf004 0x4 0x587237d8 0xab3666)
    0x587237d8 : 0x152a81c (0x8adf004 0x8566804 0x1 0x0)
    0x58723868 : 0x15291ff (0x8adf004 0x5c14 0x1 0x43e3e004)
    0x58723888 : 0x9c842c (0x8adf004 0x3e 0x0 0x0)
    0x58723928 : 0x9cc583 (0xc1d00031 0x2000000 0x41 0x2)
    0x58723a88 : 0x9cd55f (0x0 0x600d600d 0x703a 0x58723ab8)
    0x58723b58 : 0xb99647 (0xc1d00031 0x2000000 0x41 0x2)
    0x58723ba8 : 0xb8edfa (0x58723d54 0x0 0x58723bf8 0x1af015)
    0x58723cb8 : 0x9725a4 (0x43f23000 0x1 0x58723d6a 0x84)
    0x58723d18 : 0x967904 (0x88f2c00 0x1 0x58723d6a 0x84)
    0x58723db8 : 0x967c6d (0x88f2c00 0x2 0x58723de8 0x4fba02)
    0x58723e28 : 0x967c27 (0x88f2c00 0x706f7772 0x2 0x12610b0)
    0x58723e98 : 0x95658d (0x88f2c00 0x70777273 0x2 0x225f21)
    0x58723f38 : 0x956675 (0x88f2c00 0x0 0x58723f78 0x53c71c)
    0x58723f78 : 0x22f3e5 (0x0 0x0 0x58723fc8 0x2270aa)
    0x58723fc8 : 0x29c68c (0x863ec0 0x0 0x29c69b 0x8a58000)
    Kernel Extensions in backtrace (with dependencies):
    com.apple.nvidia.nv50hal(6.0.2)@0x1422000->0x1894fff
    dependency: com.apple.NVDAResman(6.0.2)@0x96f000
    com.apple.NVDAResman(6.0.2)@0x96f000->0xc02fff
    dependency: com.apple.iokit.IOPCIFamily(2.6)@0x932000
    dependency: com.apple.iokit.IONDRVSupport(2.0)@0x961000
    dependency: com.apple.iokit.IOGraphicsFamily(2.0)@0x943000
    com.apple.iokit.IONDRVSupport(2.0)@0x961000->0x96efff
    dependency: com.apple.iokit.IOGraphicsFamily(2.0)@0x943000
    dependency: com.apple.iokit.IOPCIFamily(2.6)@0x932000
    com.apple.iokit.IOGraphicsFamily(2.0)@0x943000->0x960fff
    dependency: com.apple.iokit.IOPCIFamily(2.6)@0x932000
    BSD process name corresponding to current thread: kernel_task
    Message was edited by: onlyalullaby

  • Re: Equium M Series died when put into normal mode

    Hi,
    Laptop was working fine last night until I put it into normal mode. Since then (and it may be unrelated) when I press the on switch the fan starts with the initial burst, the hard drive whirs and the lights come on but the screen stays blank and then nothing else happens. It doesn't even boot to bios or the logo screen.
    The hard drive is fine having tested on another machine, it just seems to be the actual laptop. Any ideas to save a new laptop having to be purchased?
    Thanks

    Hi,
    > but the screen stays blank and then nothing else happens. It doesn't even boot to bios or the logo screen.
    The possible reasons are a graphic card or internal display malfunction. Connect the external monitor to check, if you can see anything it means internal display malfunction. Otherwise, it's a graphic card related issue.

  • Always had no problem syncing iPod but now when I connect to computer it says iTunes detects a device but can't verify properly. Nothing is appearing under devices or on right hand side it's not saying "privates iPod" anymore to drag songs to.? Help

    iPod not verified properly in iTunes a device is detected. Then on right hand side of computer screen doesn't say privates iPod anymore to drag songs to from my library ? Under devices nothing is ther ? Always had no problem? iPod doesn't even beep when plugged in or automatically backup anymore because iTunes sees a device but not sure what it is? What happened? I've tried 3 different cords too!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - See if another computer sees the iPod in iTunes
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • TS1567 My Ipod Classic appears in my computer when connected to my Windows 8 pc but when itunes starts it no longer appears and is not shown in Itunes also. Itunes appears to disconnect it from pc.

    My Ipod Classic appears in My Computer when I connected it to my new Windows 8 pc. When Itunes starts my Ipod is no longer appears in My Computer and is not shown under Devices in Itunes. It appears that Itunes disconnects my Ipod from the pc. My Ipod still sync's up fine with Itunes on my old Windows XP pc.

    See earlier post by tt2
    https://discussions.apple.com/message/7217190#7217190

  • When I connect my iPod touch to my computer, I have a list of Events on my iTunes/iPod/Photos. I want to erase these Events. However, the photos are NOT on my MacBook Air. When I check one of the Events and then hit Apply, the photos appear on my iPod.

    When I connect my iPod touch to my computer, I have a list of Events on my iTunes-iPod-Photos. I want to erase these Events. However, the photos are NOT on my MacBook Air-iPhoto. When I check one of the Events and then hit Apply, the photos appear on my iPod. And one last thing: When I connect the iPod and open iPhoto, iPhoto tries to load New Photos (I think), but nothing happens. Any ideas?

    Resolved.

  • HT1329 how to sync ipod to a new computer when your old computer is dead

    how to sync ipod to a new computer when your old computer is dead

    Be very careful when connecting an iPod full of music to an empty iTunes library.There is very real risk of permanently losing all the music.
    To prevent auto sync, before you connect the iPod go to the iTunes preferences and select "devices", then select "disable automatic syncing for iPhones and iPods".
    An alternative method is to connect the iPod whilst holding down the 'control+shift' keys and do not let them go until your iPod appears in iTunes.
    If you see a message that your iPod is associated with a different library and asks if you want to link to a new one, make sure you press "Cancel".
    If you should click on "Erase and Sync" will erase all the content currently on your iPod and it will be replaced with the content of the iTunes library you just connected to.
    When you've pressed cancel your iPod should appear in the iTunes source list under "devices" and allow you to change the update setting to manage the iPod content manually, and that will let you use your iPod for the time being without the risk of accidentally erasing the contents.
    Then do any of the following to transfer your music from iPod back to the computer/iTunes.
    For iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.
    Find out how to do that here.
    How to copy iTunes purchases from an iPod or iPhone to a computer.
    Once you've done that, you can sync your iPod to iTunes as normal.

  • ITunes no longer recognizes my iPod nano 5th gen.  When plugged into macbook usb it appears as my iPhone.  Previously both devices had individual identities. Have reset iPod and turned macbook off/on.

    iTunes no longer recognizes my iPod nano 5th gen.  When plugged into macbook usb it appears as my iPhone.  Previously both devices had individual identities. Have reset iPod and turned macbook off/on.

    Hello BPeery,
    I would go through ALL the steps here:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    Let us know how it goes.
    Hope this helps.
    ~Julian

  • I have iphone 5s which when i connect to import the pictures directly to my windows computer. a folder by the name of my phone appears in "My Computer" . when i open it, it shows the storage information and one icon to click on. when opened it shows

    i have iphone 5s which when i connect to import the pictures directly to my windows computer. a folder by the name of my phone appears in "My Computer" . when i open it, it shows the storage information and one icon to click on. when opened it shows a couple of folders to click upon to view pictures. when i open the pictures folder and delete all the pictures , even then a lots of unclickable windows icons remain
    i have attached the picture of that window's screenshot. plus when ever i try deleting them it says,
    please help!.. i shall be really thankful.
    iPhone 5s, iOS 8

    I have the same issue and it has to do with iOS 8.2
    Apple, please mend this ASAP. Really stupid change since iOS 8.1
    If you for some reason must have many different folder make sure that you put the newst photo in the last folder so one can easily find a photo when I don't want to copy all photos to, let' say, my friend computer.

  • TS1369 I just bought a new laptop and my ipod nano will not stay connected to my computer. When I first connect the ipod it starts to sync on my ipod but not in itunes. At this point my ipod is connected to my computer but when it finishes syncing it's no

    I just bought a new laptop and my ipod nano will not stay connected to my computer. When I first connect the ipod it starts to sync on my ipod but not on itunes. The ipod is initially connected to my computer, I can see it when I look on devices in my computer. However, when it finishes syncing it is no longer detected to my computer. I cannot transfer any of my songs to my new laptop because of this. I have tried to reinstall itunes, reset my ipod and use a different port. None of these things worked. Any ideas?

    rubicon53 wrote:
    I just bought a new laptop and my ipod nano will not stay connected to my computer.
    I cannot transfer any of my songs to my new laptop
    How to use your iPod to move your music to a new computer

  • My ipod shuffle is showing up when plugged into my computer. Also, isn't the orange light suppose to stay on until charged. Mine lights orange for a minute and then goes off.

    my ipod shuffle is showing up when plugged into my computer. Also, isn't the orange light suppose to stay on until charged. Mine lights orange for a minute and then goes off and also it wont be recongnize by my computer .please help

    I'm having the same problem.  I'm using a new shuffle usb cable in my 2nd generation shuffle and nothing shows up on computer.  I'm wondering if the dock for the second gen is different than the new usb cable direct into the 2nd gen shuffle. I don't have a dock for it.  Before I buy one on ebay I hope someone can assist.

Maybe you are looking for

  • Error when running the Crystal Report 9.1 (visual studio 2003) in the deployed server

    Hello, 1) I am suddenly getting an error message 'Load Report failed' in a production server (where the VS2003 application is deployed) when the Crystal Report is executed. This has happened maybe because of the Windows/Crystal Report Updates! I am a

  • LaserJet Pro MFP M127fn - can't get on network

    LaserJet Pro MFP M127fn Is this printer supposed to be available for wirless printing? I cannot seem to get it on the network. Under HP webservices on the printer, the only option is print info sheet (which of course doesn't contain and IP address si

  • How do I get the date format of MM/DD/YYYY to be recognized in Numbers?

    I recently switched from Windows and Excel.  All the bank details that I export from my bank have dates formatted as mm/dd/yyyy.  Excel has no issues dealing with this but Numbers will not recognize the cell contents as a date.  Any help?

  • Email contents to database

    Hi ppl, I'm just new in Java and coming from an Oracle RDBMS background. I want to ask if theres a possibility that email content will be put in the database. For example, if one person email me his personal info, name, address ,etc, then I'll be run

  • Should I include standard sap screen into my program?

    Hi all, I have a custom program, where I need to modify the values of material batch classification values (like in trans. msc2n). What is the best way to do it? I tried to copy the screen from standard sap function pool CHRG (screen 2300) to my own,