TS1541 Startup disk full after installing Leopard. How do I delete files safely?

How can I delete files in my startup disk. I have deleted photos and music files but the trash will not empty.

When files refuse to delete, what error message are you getting?
Allan

Similar Messages

Macbook air startup disk full, after removed 149GB pic folder

After I removed ALL pictures worth of 149GB, I still get the "startup disk full" message. It pops out all the time, more than frustrating, my air is not just a typewriter.

After trashing the pictures did you empty the trash? Look under the Finder menu.

Startup disk full after Adobe Flash player update

I received an update request for a new version of the Adobe Flash player this morning. I accepted it and the installation seemed to work fine. The only special was that the last 5% of the installation took some minutes to install.
Minutes later the system (MAC OS Lion) sent a warning that my startup disk is nearly full. The disk had about 150GB free disk space. When I checked it with the finder my disk space was about 350 MB and declining. I disconnected the MacBook from the internet and the the declining of the available disk size stopped.
If I check the disk information (using the finder) of the harddrive and it showed only 350MB as free. If I check the size of the folders on the top layer and add them together I should still have about 150GB of free disk space.
Did somebody have the same problem? What can I do now?

Hi, I found the file but I'm still not sure what really happend.
First I followed a brodys advices (thanks!). Different was, that the flash player download looked really like the original from Adobe. It simply appeared as an update request as som many others as well. What I want to say is that I didn't go to a web site and downloaded it. In fact I think it was the original and everything was a coincidence.
The Mac OS version I run on the MacBook is 10.7.4! Nevertheless I installed the flashback trojan patch. But nothing happend.
With the remaining 300 Mb of diskspace I could operate at least a little.
There are three users on this macbook.
I logged in each of the user and found that in my daugther uses 160 GB. I found a file MOV_6007.AVI with a size of 148GB sitting in the recovered picture structure of the iphoto library.
My daugther told me that she was downloading movies from a dropbox folder and then she imported them into iphoto. She did it using the finder, selecting them and dropped them onto the iphoto icon in the dock.
Whatever happend later I have no idea. The Macbook was running during the night. The next morning I used it to read news and at this time I accepted the adobe flash upgrade.
In the system log files I found an entry that showed I had about 8GB of disk space free at this time. It should have been about 160GB. So somehow this file grew already that much during the night.
And it obviously grew further until I got the disk full message minutes later.
It is scary! So what I did now is delete the file and it seems the Macbook is ok again.
I wanted to tell this long story as it is probably something new and somebody else had a similar issue already.

My macbook air hd is full after installing windows, how I could free disk space?

My macbook air only has 25GB left of HD after I did install parallels and windows to use the machine at work, how I could release some space in the HD without uninstall windows and parallels?

Hi Laiwin,
What did you delete? Did you by any chance delete anything out of the /Library or /System folder off the root level of the drive? Probably the best option is startup the computer and then immediately hit Command + V. This will boot into Verbos mode. When does the boot process stop? What does it say? This will help tell us where it is failing in the boot process.

My mac book startup disk is full and when I start it, it give me a blank blue screen. I have tried the shift and I started in safe mode, and it gave me the stars screen. How can I delete files to fix the problem

My mac book startup disk is full and when I start it, it give me a blank blue screen. I have tried the shift upon start
and I started in safe mode, and it gave me the stars screen. How can I delete files to fix the problem

1. Start up in Safe Mode.
    http://support.apple.com/kb/PH11212
2. Empty Trash.
    http://support.apple.com/kb/PH10677
3. Delete "Recovered Messages", if any.
    Hold the option key down and click "Go" menu in the Finder menu bar.
    Select "Library" from the dropdown.
    Library > Mail > V2 > Mailboxes
    Delete "Recovered Messages", if any.
    Empty Trash. Restart.
4. Delete old iOS Devices Backup.
    iTunes > Preferences > Devices
    Highlight the old Backups , press “Delete Backup” and then “OK”.
    http://support.apple.com/kb/HT4946?viewlocale=en_US&locale=en_US
5. Re-index Macintosh HD
   System Preferences > Spotlight > Privacy
   http://support.apple.com/kb/ht2409

I can't login, keep geting "Your Startup Disk is Full" and asking me to delete file. if I cant login how can I delete files? Please help

I Keep getting "your startup disk is full" ..... "You need to make more space available on your startup disk by deleting file..." If I can't have an acess, how can I delete files. Please help..

That means the hard drive of your computer is full, and you don't have enough free space on your computer, to do what you are trying to do.
You need to clear up space on your computer.
If you hard drive is full, check the following places to ensure they are not holding unwanted data.
- your trash can in the dock
- if you use iPhoto, your trash in iPhoto - launch iPhoto, and select trash in the left hand column. iPhoto has it's own trash, and is often overlooked
- your download folder - finder / home user / downloads - every time you download something, it stores it here. This is often overlooked as well
- do you have more than one user on the computer? If you do, ensure they are needed. If not, delete them, and the contents of their home folders
If you hard drive is very full, you may want to consider the following:
- putting in a newer larger hard drive - (call you local apple store for prices on this)
- deleting data off your computer
- moving data to an external drive - (iPhoto Libraries, iTunes Libraries or iMovie events, as they are the biggest space hogs)

How many free disk space after install OS X lion (10.7) ?

Hi,
I would like to know that how many free disk space after install OS X lion (10.7) on MBA i5.
Many Thanks,
Eric

I want to buy MBA i5, I would like to free disk space of MBA 13" i5, Could anyone tell it to me? Thanks
As you're buing a new MacBook Air, it will come pre-installed with Lion. The actual installation will be somewhat larger than a "clean" Lion install as it will come with iLife preinstalled. Obviously, with an Air's limited storage space, you want to be sure that you have enough room for any applications and data that you'll want to keep on the SSD as well. It is fairly easy to upgrade the SSD on an Air:
http://eshop.macsales.com/shop/SSD/OWC/Aura_Pro_Express
The amount of RAM you have installed is probably more important. Fortunately, the newest 13" MacBook Airs all come with 4GB standard now.

Disk permissions problem after installing Leopard

Hi!
I performed a Repair Permissions after installing Leopard. Firstly, I noticed that this procedure took a lot longer than before the upgrade. I also received the following error messages -
Repairing permissions for “Macintosh HD”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
ACL found but not expected on "Applications".
ACL found but not expected on "Library".
Permissions repair complete
What does all this mean? How can I fix it?
Thanks.

You suggest I reinstall all of Leopard and then update to 10.5.1?
No. Download and install the standalone 10.51 updater without reinstalling the entire OS.
I found 2 Remote Desktop updates (Client and Admin) - version 3.2. Are these for Leopard?
Use the client version.
How will this help my problem?
Those are status messages. You don't have a problem.
(26178)

Startup disk full error - boots normally but won't start finder

I'm having a problem in which my iMac when it boots gives me an error that the startup disk is full, but other than that it can boot normally and allow me to log in, but after that the startup stalls. I never get past the default "outer space" desktop image and finder never starts, so there's no icons, no dock, and nothing on the menu bar. What's weird is that Safari and Mail start and I can see them because I believe I have them starting automatically at boot. Safari works (I'm using it now to enter this discussion). Mail on the other hand starts but is hung checking for the servers for incoming mail.
I've tried to boot in safe mode (holding down Shift key at startup), but it doesn't work.
I've tried to boot in single user mode (holding down cmd-S at startup), but it doesn't work either.
I've tried to boot from Snow Leopard installation media (holding down C at startup), but it doesn't work as well.
Each time I try one of these alternate boot methods, it just takes me to the normal login screen with the startup disk full message. I click OK, login, and get stuck.
I'm just trying to get the finder started so that I can delete some files, but I just can't get that far. It's strange that the browser works perfectly and internet connection is fine, but nothing else works.
Thoughts? Thanks. - Mike

Hi Lina, and welcome to Apple Discussions.
Safe Mode might allow you to boot and free up some space.
If you have access to another Mac and a FireWire cable, another option would be to use FireWire Target Disk Mode to transfer data to the other Mac and delete it on your MBA.
If either way works, you want to open up somewhere around 15% free space. Once you do that, run Repair Disk: Boot from install disc (insert disc>restart>immediately hold down c key and keep holding it until you see “Preparing Installation”)>at first screen select the language and click Continue> click on the Utilities Menu in the menu bar>open Disk Utility>select your HD in the panel on the left side>click Repair Disk at bottom of main window. Run this at least twice, and keep running it until it says “appears ok” twice in a row. If that doesn’t happen, you may need a stronger utility such as DiskWarrior or if the directory is damaged beyond repair, you may need to reinstall the OS, or you may have a damaged HD (repair utilities can only repair the directory structure, not the HD itself).
Ultimately, though, it sounds like you need a larger HD . . . .

Adobe Photoshop Scratch Disk Full/Startup Disk Full error - PLEASE HELP

Dear ALL,
I have started to notice recently that when I run Photoshop CS on my Mac OSX Tiger, I am getting the Startup Disk Full error message. Never happended before.
Since my initial post I downloaded Macaroni (utility) and have run the daily/weekly/monthly backups, checked the /private/var/vm and /private/var/log and /Volumes. Nothing unusual there...
When I started getting this error I had 32GB left on a looked at my HD and I seem to have 32GB available on a 152GB drive. Now after deleting I have 76GB capacity left.
But when I tried to open a Photoshop PSD or TIFF file and do a crop I still get tge Startup Disk is Full error followed by the Adobe Photoshop error Scratch Disk is Full.
I am thinking of running the Disk Utility from the Applications/Utilities/Disk Utility and doing a Verify Disk and Verify Disk Permissions followed by Repair Disk Permissions. I will be logged into the machine whilst doing this. Is there any danger in this as I have read elsewhere that I need to do this from a bootable volume. If that is the case how do I create a bootable disk/cd? If not then what is the cure to my Disk Full as surely there is now nearly 50% FREE!!!!!
Please help.
Max

PS will always use the boot disk for scratch to some extent even with an alternate primary scratch disk.
Be sure to turn off Spotlight as it causes problems.
4GB of RAM would be nice, I understand small files don't work well if there is more than 4GB RAM but large files will. OS X uses free RAM as cache and RAM disk before using disk drives.
How much RAM is allocated to PS? More RAM would help.
A dedicated lean boot drive helps. Install just what is needed for your work, use a separate drive for data, and yet another RAID volume for scratch.
When in doubt, backup with SuperDuper, and do an erase and then restore. Always backup before repairing; and never, ever, use an old version of Tiger CD/DVD - like 10.4.2 on 10.4.7/.8. Use "fsck" instead, or your emergency boot drive.
Also, give Applejack a shot and delete the cache folders and swap files from time to time to keep a system humming. CS/CS2 and Tiger benefit nicely from more RAM.

Can't get past setup assistant after installing leopard...

i am having trouble getting past the setup assistant after installing leopard on my other computer which is a 1.25 ghz G4 desktop. Everything seems to be going fine then the setup assistant comes up and i go through the exercise of filling it out and at the end it says click on done and then you can use the computer. unfortunately it goes right back into the setup assistant like i had never gone there before. it is in some kind of loop. would it be wise to reinstall leopard? if so, does it know that it was installed already and rewrite over the first install? or is there something else i may try. i tried resetting the PRAM and some other things recommended but nothing seems to work. any help will be appreciated.
thanks in advance...

mr_magicman,
I can imagine how frustrating this must be for you. It sounds like you went for the (default) Upgrade option.
Okay, how about trying this:
1. With the *OS X 10.5 Install Disk 1* still in the bay, Restart your computer. Without access to menus, you'll have to use the power switch to turn it off. +[Alternatively, if you do have access to menus, select the Restart command (in the Apple menu) — always the preferred method.]+
2. If you're using the power switch method, here, wait about 10 - 15 seconds then depress the power switch again for about 5 full seconds (or until you hear the computer come back to life). +[Alternatively, if you had selected the Restart command in Step 1, the computer will start up again on its own.]+ *Either way, as the computer starts up, press and keep pressing, the Mouse until the disk ejects.* By the way, if you're using a Mighty Mouse with a left and right option, press down on the left side only. Hopefully this will get you out of the loop caused by your Install DVD remaining in the drive.
Finally, to be fair to you, I must tell you that there's a more suitable Forum for your particular kind of problem, viz., *Installation and Setup* (http://discussions.apple.com/forum.jspa?forumID=1219) I recommend you check out the questions/answers in that Forum in case your question has already been asked and answered.
PS. If you do re-post your question in that Forum, don't forget to mention whether or not you internal hard disk has been backed up.
GOOD LUCK!
Bill

After installing Leopard, my G4 will no longer boot in OS 9.22. (Classic still works, but I need it to boot in OS 9.) Any clues about what the Leopard installer might have done to my machine that rendered OS 9 boot unusable? What can I do to fix it?

After installing Leopard, my G4 will no longer boot in OS 9.22.
(Classic still works, but I need it to boot in OS 9.)
Any clues about what the Leopard installer might have done to my machine that rendered OS 9 boot unusable? (And what can I do to fix it?)
Details:
G4 Gigabit Ethernet
Boot ROM version: 4.2.8fl
Accelerator card added: 1.6 MHz
1.5 Gig Ram
I have erased the partition that had Leopard installed on it.
I zapped the pram.
In Open Firmware, I "reset-nvram", and then "reset-all"
I tried to reinstall G4 FW Update 4.2.8, but that must be done when booted from OS 9, and of course, that's the problem: it won't boot into 9.
I tried restarting from 9.2.1 DVD.
I tried restarting from an external firewire drive containing OS 9.2.2.
I tried moving a fresh OS 9.2.2 system folder into an empty partition on an internal hard drive. (Partition was created WITH OS 9 drivers installed.)
All attempts to boot into OS 9 give me the same results - grey screen - no spinning beach ball, no icons or logos - just a blank grey screen.
This machine still works fine in OS 10.3 and 10.4, and it worked fine for many years booting into OS 9, until I installed Leopard, and I haven't been able to boot into OS 9 since then, although I have done considerable research online and tried many things.
I have since learned that this machine does not support Leopard - 10.5. Fine, but how did it break 9.2.2?
Any help greatly appreciated.

Thanks for checking in, BDAQua.
Problem solved.
In the docs that came with my Powerlogix accelerator card, I found this sentence buried:
"If you reset the PRAM, the NVRAM code for OS9 compatibility is cleared, so you will have to boot from the Firmawre Update CD and perform this process again in order to boot in OS9."
The "process" it's referring to is the process of setting up the NVRAM for booting into OS9 from the CD.
Fortunately, I was able to find the disk, and it worked as expected. I can now, once again boot into OS9.
Conclusion: My (unadvised) attempt to load Leopard on this old machine apparently reset the PRAM on the accelerator card and cleared the NVRAM code for OS9 boot. Although I did attempt to reset the NVRAM via Open Firmware, it did not reset it on the accelerator card.
So, thank you BDAQua, for your "Ah yes" . . . that's all I needed to steer me in the right direction.
Gratefully,
tupester

What do i need to do when i get a startup disk full error?

What do i need to do when i get a startup disk full error? I can't update software or use my MacAir at all.

Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
If you're using Time Machine to back up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as "Backups." The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

Finder not working after installing Leopard!!!

Hi everyone.
I'm getting a strange Finder behavior on my Intel iMac (not the newest version) after installing Leopard. The thing is, after instalation, when I start the computer, the top bar on the screen starts blinking, and there's no way to open a Finder window. And it stays like that forever! I tried to open Finder from the Dock, but the blue dot of the active programs blinks 3 or 4 times and then disapears. Plus, the only way to access the Apple logo on the corner to switch the computer off or restart it, is by opening one other program from the dock (in this case I have Safari running), because this way the top bar stops blinking.
So, I thought I should try to update Leopard to 10.5.1, and this could solve the problem. But no. It searches for new software updates, tells me that there are new updates, but I cannot see them nor install them!
This is really weird and annoying!
Anyone had this problem? Please, help me.
P.S.: Yes, I've tryed a second install of Leopard. Same thing!

anamorphis wrote:
Hi everyone.
I'm getting a strange Finder behavior on my Intel iMac (not the newest version) after installing Leopard. The thing is, after instalation, when I start the computer, the top bar on the screen starts blinking, and there's no way to open a Finder window. And it stays like that forever! I tried to open Finder from the Dock, but the blue dot of the active programs blinks 3 or 4 times and then disapears. Plus, the only way to access the Apple logo on the corner to switch the computer off or restart it, is by opening one other program from the dock (in this case I have Safari running), because this way the top bar stops blinking.
So, I thought I should try to update Leopard to 10.5.1, and this could solve the problem. But no. It searches for new software updates, tells me that there are new updates, but I cannot see them nor install them!
This is really weird and annoying!
Anyone had this problem? Please, help me.
P.S.: Yes, I've tryed a second install of Leopard. Same thing!
Do NOT install any updates until you resolve the problem, which is unrelated to any updates. Updating a computer that is not working correctly will only make the problems worse, never better.
If this is the second install, was it on an erased HD or did you import your previous programs, etc?
It sounds like you might have some errant 3rd party software running.
Did you run a disk check and file permission verify/repair before installing?
Check your startup program window and remove everything there. Write them down so you can put them back later.

Upon start up I get a start up disk full message and to delete files, now I only get a a blue screen on start up. How to I get past the blue screen and how do I delete files?

Upon start up I get a "start up disk full message, delete files". Now on startup I only get a blue screen. How do I get past the blue screen and how do I delete files.

That;s really not enough free space... you can use a tools such as OmniDiskSweeper to find out where your large files reside and begin pruning (or copying to an external if they're files that you want to keep).
One thing is certain - if you're going to continue your current usage you're certainly going to need to install a larger boot drive.
Clinton

TS1541 Startup disk full after installing Leopard. How do I delete files safely?

Similar Messages

Maybe you are looking for