TS1550 Error message: Backup Failed. However if the startup disk permissions are repaired one only backup will succeed before the permissions are again repaired. How is this to be fixed?
Error message: Backup Failed. However if the startup disk permissions are repaired one backup will succeed before the permissions are again repaired. How is this to be fixed?
Hi,
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
Then Repair the backup Disk... any change?
Similar Messages
-
how do i delete from the startup disk? I am trying to get Mountain Lion from the App store and it says that the purchase was not complete because i need 4.06 GB space to download OS x 10.8. and to remove items from my startup disk to increase space. How?
ThanksYou can use iCloud with 10.7.5. You do not need to upgrade to Yosemite. You should provide a minimum of 15 GBs of free space or 10% of the hard drive's capacity, whichever is greater.
Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located. -
I recently updated my iTunes to the most recent version and I am receiving an error message when starting up iTunes: iTunes was unable to load data class information from sync services. Reconnect or try again later. (Does anyone know what this means and if it is going to cause me issues?)
http://support.apple.com/kb/TS2690?viewlocale=en_US&locale=en_US
-
Having a problem with a iPhone 3GS. When I try to back it up on my pc or laptop it has a error message. We have other iPhones that will connect when plugged in. I need to back up my data on this iPhone so it can be serviced. Can anyone help?
Try a quick reset of the phone first. If it still doesn't work, go to Edit/Preferences/Devices in itunes and delete the old backup for the 3GS.
-
I tried to install an itunes update yesterday on my Dell Laptop. I kept getting an error message. Now I cannot access itunes and it says I need to reinstall itunes. Will I lose all of my music?
Installing, and uninstalling, applications never touches or removes the data.
Clean out and uninstall all the apple programs and software thru Programs and manually.
Might want to use Revo and CCleaner
I always use manual standalone installers (and keep a couple backup versions)
itunes 10.5 may affect iTunes media playlists, not sure, depends on what you have.
A search of these forums will show some threads.
I'd clean up vista, you need SP2 or later, and specific error message?
I wonder as you arenot the first with a dell if maybe the OS or included software.
Security programs like Norton and older versions of Kaspersky have been implicated.
Also settings in IE that affect pop-ups and plug-ins. -
Where are all the Naysayer's that said no one would receive their phones before the 10th?
This whole weekend this board has been filled with people saying that no one is getting the phone until the 10th because apple is going to hold them up etc. Now that a lot of peoples phones are out for delivery they are all no where to be found
Tidbits wrote:
I guess you didn't read the other threads on this subject. If you did then maybe you'd get better clarification, and you wouldn't have made this post.
I said don't expect it last week. 7th at the earliest, but realistically 9th or 10th.
no you said
I don't expect special treatment, and neither should anyone else.. Apple set the date for the iPhone to be there. Feb 10 and the way Apple works it will be here on the 10th. This has happened on EVERY release of iPhone no matter which carrier around the world.
and
"I am 99% positive no one will get their devices no earlier than the 9th.
No one throughout the iPhone pre-orders no matter which version has NEVER gotten it no earlier than 1 day from the release date. All the iPhones will be held at the distribution center regardless if it is UPS or FedEx.
I have actually seen where a few devices ended up 2-3 days early and was sent back to the distribution center, and was delivered on release day(I have experienced that personally twice, and a few friends in the 48 states).
Everyone should just relax and expect their phones no earlier than the 9th." -
My Macbook doesn't recognise the startup disk
I started having problems with Yosemite and lion (installed in the same hard drive, different partitions) so i erase all and instal mavericks, the macbook is late 2009 stock but i don't have startup disk, when i install mavericks it tells me that wont boot and it went an error trying to install, so i am able to boot with the alt key but my mac doesn't recognise de boot disk, when i try to select the startup disk on preferences it tells me: "You can’t change the startup disk to the selected disk. The bless tool was unable to set the current boot disk.", what i can do, i can boot with the alt key but it doesn't boot automatically.
If you erase a drive, then in order to install Lion or later you must first install Snow Leopard 10.6.8. You can install Snow Leopard using the installer discs that came with your computer when it was new. You can then update the version of Snow Leopard to 10.6.8 by downloading the combo updater.
-
Starup disk was unable to select install cd as the startup disk
I was in 10.3, crashed. Had to restore (saving my things). I updated up to 9.2.2. Put in my 10.2 cd to install and I get a message...
"start up disk was unable to select install cd as the startup disk."
As far as I know I did all the updates, but could be wrong.
Anyone have an idea how I fix the problem?
dnTammie, please excuse my confusion, but you say you were in 10.3 (Panther) and it crashed. You say you updated to 9.2.2, then you say you put in 10.2 (Jaguar) cd to Install. At the bottom in your profile you show you are running 10.4 Tiger.
So I am confused which Operating System do you want. Your machine will not run all 4 Operating Systems at once.
To Install from a CD or DVD you Insert the Media and restart your computer holding down the C key for it to boot.
Also bear in mind that If you are not using a Full retail version of the Operating System, or the Operating System that came with your computer it will not work, if it came from another computer. Operating Systems that come with specifc computers will not mix and match with other computers.
Please tell us exactly what operating system you want to use.
Cheers Don -
I've been trying to upgrade to/install Itunes 10. When trying to do so, I get the error message: Install failed run preupgrade for Apple Mobile Device Support.
Per what I saw as a response to someone else who had a similar issue, I thought a fix might be to uninstall my existing Itunes, then try to re-install the Itunes 10. I tried that. However, I still get the same error message. Now, I have no Itunes.
I tried to email Apple, and they have not replied.
Anyone offer any solutions?me too did you get any help?
-
I was downloading a app from the app store and it downloaded about 85% then gave an error message download failed but when I reopen the app store to the purchases the resume button show but when i click it the same error comes up failed to download
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
After mavericks update, HP print error message = 'filter' failed.
Since I updated my MacBook Pro to OSX 10.9, I can no longer print on my HP Deskjet 1220C. I get an error message that says "filter failed". This printer is about 10 years old, but it's a goodie. It worked fine when I was using OSX lion. My roommate is still using OSX lion, and can print on the 1220C just fine.
I tried reinstalling the drivers found at < http://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US >, but got the same error message when I tried to print.
Is there a raster filter file I could copy from the old operating system to solve this issue? Any suggestions?Mr. McGruzoo,
I went to PCHelpStation, an online company that will remotely fix computer problems. Last week, that got the printer to work. Then two days ago, I realized that the “generic” printer driver only prints in black. Yesterday and today. the company spent hours and finally that company gave up. After seeking all kinds of work-arounds, nothing will change. Now, I am in a email war with Hewlett Packard. My 1220c printer is excellent. I do not want to buy another and I believe that HP should support every computer. The fact that HP has excellent long lasting products is all the more reason for that company to continue to support the 1220c printer. In one the emails, the VP of HP offered me a coupon for 20 dollars off paper and toner and a printer recommendation to buy a new one. I am not taking the coupon nor buying a new printer. I want a DRIVER for my printer!
Thank you for responding to my post. Maybe all of us can band together and badger HP until a driver is provided.
Sincerely,
Rosalind Johnson -
I just got creative cloud 2014 and decided to install After effects on my laptop. I get error to install Adobe Application Manager. I got AAM but installing it, I got an error message "Installer failed to initialize. Please download Adobe support advisor" Now, the support advisor is discontinued. What do I do?
Please anyone help me.
ThanksError "Installer Failed to Initialize" | Install desktop application | Windows
-
Help! I have recently updated LR5 and before doing so I was able to email files to clients! (Very Convenient) Now my problem is I have not been able to get pass this error message reading "failed to send" which gives no further detail about what to do to rectify the situation. Someone please guide me through this! Thanks in advance!
Did this ever get resolved, as I am having the same issue. Trying to learn LR5 AFTER a decade using Aperture. I was able to set up a validated account but when I try to send an e-mail or photo I get the simple " Failed to Send " message. Using latest version of Mac OS X.
-
How do I overcome error message "Installer failed to initialize."
I have Production Premium CS5.5. I need to install it on a new computer. The files downloaded fine. When I double-click on "Setup.exe," the install starts, but I get the error message "Installer failed to initialize." How do I overcome that?
Hi rcraighogan
Please refer : https://forums.adobe.com/thread/1082848
Re: Photoshop CS6 installer fails to initialize
https://forums.adobe.com/thread/1588567 -
Export release build failed with an error message: complilation failed while excuting : compile-abc
I updated air sdk from 4.0 to 16.0 beta to fix apple app store submitting bug. I can build the project and run it on simulator without any problem. But when I tried to export the ios release build, I got this error message: complilation failed while excuting : compile-abc.
I use commmand line to excute compile-abc.exe with the parameters that adt gives it, but it failed without any error message.
Here is the command line:
compile-abc.exe -mtriple=armv7-apple-ios -filetype=obj -sdk "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.5\sdks\4.5.1 - air16\lib\aot/lib/avmglue.abc" -fields "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.5\sdks\4.5.1 - air16\lib\aot/lib/air-fields.arm-air.txt" -O3 -abc-file-list=E:\MyApp\bin-debug\AOTBuildOutput8184169967790207636.tmp\ABCFilesList.txt
There's a empty file AOTBuildOutput-0000001821_1821.o left in the command line workaroud path. I opened file AOTBuildOutput-0000001821.abc, but didn't get any clue. How can I trace this problem?Still having similar issues - seems to be when I embed an image - but works for every release except for release build
Tried your work around but doesnt seem to make a different
[Embed(source = "/../assets/[email protected]")]
protected static const ATLAS_IMAGE:Class;
[Embed(source = "/../assets/[email protected]", mimeType = "application/octet-stream")]
protected static const ATLAS_XML:Class;
[Embed(source = "/../assets/iconMap.png")]
protected static const ATLAS_IMAGE_LOW_RES:Class;
[Embed(source = "/../assets/iconMap.xml", mimeType = "application/octet-stream")]
protected static const ATLAS_XML_LOW_RES:Class;
if(Starling.current.viewPort.width > 320)
atlas = new TextureAtlas(Texture.fromBitmap(new ATLAS_IMAGE(), false), XML(new ATLAS_XML()));
}else{
atlas = new TextureAtlas(Texture.fromBitmap(new ATLAS_IMAGE_LOW_RES(), false), XML(new ATLAS_XML_LOW_RES()));
Maybe you are looking for
-
I love my new imacg5. Best computer I ever had; however I have been hearing a "squeek squeek" occasionally (especially when running lots of apps. One evening it sounded like crickets (while I was burning a dvd). I tried apple chat support but Rajive
-
Layout Editor is not rendering widgets during Design time
Hi, I am new in ADF development and my page has suddenly stop rendering in Design Tab. Initially, when I was running unbounded task flow, it is just showing a blank page. Can anybody help me in resolving this issue? I have seen Franks note on PhaseLi
-
TabIndex in DataGrid ItemRenderer Component
How to implement tabindex for the DataGrid ItemRenderer Component?Any idea Please.
-
I have downloaded "Windows Essentials" and now I want to download "Windows Live Mail 2012" How do I do it ? I currently have it on my desk top and I would like it on my PC . .
-
Outline agreement with different item prices
Hi, I have some outline agreements with different prices. The prices is based on the quantity purchased on the period of the contract: Example: for the first 100000 items the price is 4u20AC, beetwen 100001 and 200000 it is 3,9u20AC and after it is 3