TS1550 my external drive icon vanishes from the desktop. when my computer wakes up there is a message that says backup failed and that I did not eject device properly

My free agent external drive vanishes from my desktop and when my computer wakes up I get a message that the backup failed and that the device was not ejected properly

See if it's related to this...
It also seems to be related to later OSX versions, like 10.8.x & 10.9.x
The 2012 macs (and later apparently) (also later OSX versions on earlier Macs can do it also), not waking normally from sleep after hours being in sleep. (noted here ...
http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
"Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
About iMac sleep...
http://forums.macrumors.com/showthread.php?t=1529750
Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip

Similar Messages

  • After having to replace my hard drive most photos were lost, but luckily were on an external drive. Have copied the iphoto library to computer, but now there are two seperate libraries.  How can I merge them?

    How can I merge two Iphoto Libraries?

    If you have Aperture 3.3 or later and iPhoto 9.3 or later you can merge libraries with Aperture.
    Otherwise the only way to merge Libraries is with the paid ($20) version of iPhoto Library Manager

  • I have a FreeAgent Goflex drive (for Mac) after a while the icon disappears from the desktop and can only be restored by reconnecting

    I have a FreeAgent GoFlex backup drive (for Mac) after a while the icon disappears from the desktop and can only be restored by reconnecting the firewire. This also happens when I use the USB connection as well. Thanks

    Did you use any of the "sleep" drivers supplied? I have found it best to just totally reformat/erase the drives and let the OS handle them.

  • Time achine. Each time I wake up my Mac. it says that I did not eject the disk properly. Do I have to eject the external hard drive before putting the Mac. to sleep?

    Time Machine. Each time I wake up my Mac. it says that I did not eject the disk properly. Do I have to eject the external hard drive each time I put the Mac. to sleep?

    If you do eject or disconnect that external drive before sleep, do you ever get that message?
    Some Drives & chipsets will not work right with sleep, what brand/model is it?

  • How do I remove Canon " My Image Garden" from the desktop when turning on my computer ?

    How do I remove Canon " My Image Garden" from the desktop when turning on my computer ?  I have the icon but the program starts up and I have to delete it manually  from the desktop to clear my screen for other work...

    Are you using a Windows or a Mac? What you're seeing (the backwards L shaped menu) is probably the Canon Quick Menu. If you have a Mac you can go into your applications, select Canon Utilities, then drag Canon Quick menu to the trash and empty trash can. On Windows you'd go to the control panel, select Programs and Features (or Uninstall Program/Add or Remove Program) and uninstall the Canon Quick Menu. Not required for all the normal functions of the printer. You can do the same thing for My Image Garden. Also not required.

  • From within Photoshop Elements, when I try to open Editor, a box opens that states I must activate the software.  I registered and activated the software last year.  When I click to activate, I get a message that I am not connected to the internet.  I am

    From within Photoshop Elements, when I try to open Editor, a box opens that states I must activate the software.  I registered and activated the software last year.  When I click to activate, I get a message that I am not connected to the internet.  I am connected.  How do I get Editor to work?

    You would get the redemption code, or perhaps even the serial number, from whomever you purchased the software from, apparently Amazon, so talk to them.  This wouldn’t be the first time they’ve sold something that didn’t have all the numbers needed to license it.
    A redemption code is something that is usually on the inner disc packaging if you purchase the media in a box, and there is a barcode on the outside of the packaging that must be scanned at the checkout register to activate the hidden inner code so you can redeem it at home on that website.  This is what happens if you buy PSE from a brick-and-mortar store like Best Buy.  I don’t’ know what happens if you purchase the downloaded version as I have never done that.
    A redemption code is 24-digits of letters and numbers that you enter into a website to get a serial number, once and only once.  The serial number of only 24-digits, no letters, is what you enter into the software during the install or when you run it and it asks if you want to register or run in a trial mode—whatever the exact phrasing is.
    In any case it sounds like you don’t have either a redemption code or serial number—although perhaps something is listed on the purchase confirmation or your account online at Amazon or even in an e-mail from Amazon.

  • Is there a way to check what I had purchased from the itune store to match the charges on my credit card, because there is a charge that I do not recognize

    Is there a way to check what I had purchased from the itune store to match the charges on my credit card, because there is a charge that I do not recognize

    http://support.apple.com/kb/HT2727
    Regards.

  • How can I stop receiving email automatically from the community when they have issues with there problems regarding the apple products.

    How can I stop receiving email automatically from the community when they have issues with there problems regarding the apple products.

    Click here for the instructions on stopping the emails.
    (85713)

  • There is an app that I did not download in my update section.  I read reviews and it seems to be spy ware.  How do I get it from not showing up on my app updates?

    There is an app that I did not download in my update section.  I read reviews and it seems to be spy ware.  How do I get it from not showing up on my app updates?  I do not want to download or update it, obviously. 

    If the app is G-Toolkit and you have a Gmail app on your iPhone, delete the Gmail app.  Apparently the G-Tool kit is tied to a Gmail app.  From searching the web my impression is that G-Toolkit is not spyware and is from a legitimate company that produces app for several platforms.

  • I am so angry - there has to be a misundering.  my Itunes was disabled as there was a charge that I did not authorize and I cannot find the phone

    I am so angry - there has to be a misunderstanding.  my Itunes was disabled as there was a charge that I did not authorize and I cannot find the phone number for security and the dingbat girl who I'm emailing send me a link that does not work.  And I am extremely frustrated.   Please help.  I need a phone # to contact security.

    Contact Apple Support here:
    ACCOUNT SECURITY CONTACT NUMBERS
    Cheers,
    GB

  • When I use the Alt key and the clone tool, I get a message that I did not use the Alt key to define

    Whe I use the Alt key with the clone tool, I get a message that I have to use the Alt key to define the area to be copied. What am I doing wrong?

    I tried to check the alined box, but it would not work. I was able to check
    the Sample box, but they they give you about 5 choices to check and I have
    no  idea what they are all about. I appreciate your help.
    Dino
    In a message dated 9/18/2012 11:09:06 A.M. Eastern Daylight Time, 
    [email protected] writes:
    Re:  When I use the Alt key and the clone tool, I get a message that I did 
    not use the Alt key to define
    created by hatstead (http://forums.adobe.com/people/hatstead)  in 
    Photoshop Elements - View the full  discussion
    (http://forums.adobe.com/message/4707426#4707426)

  • HT2729 I cannot synch a movie from my iMac to my iPad.  I keep getting a message that I am not connected to the internet.  Yet, I can fetch my email, access many newspappers, and listen to music clips for the itunes store.  I did a retart of all without l

    I cannot synch movies to my iPad.  This has worked for me in the past.  I keep getting an error message that I am not connected to the internet.  Yet, I certainly am.  How else could I post this message.  I can listen to music clips from the iTunes store, fetch my email, and read current newspapers on the internet.  I restarted both my iMac and my Ipad and that didnot help. 

    I completely understand what is happening. I know that you are connected to the Internet. I made the suggestion because I have seen it work in similar circumstances. The Apple iTunes servers can be a bit fussy about things and sometimes rebooting the router clears up this miscommunication between iTunes and your network.
    Have you tried signing into your account and then try to sync again. Go to Store>View Account. You will have to enter your password. Then try to sync again. Or try signing out completely in Store>Sign out. Quit iTunes, sign in again and then try to sync again.
    Sometimes refreshing settings will help clear up weird problems.

  • Why has the Chromcast icon vanished from the HBOgo app for iPad /iPhone?

    I have successfully casted to my Chromcast through the HBOgo app in the recent past.  I thought it was the fact that I unknowingly had automatic updates turned on (D'OH!) & it was the most recent update that caused the icon's disappearance. However, I have definitely cast from the HBOgo app since the last update on June 24.
    THIS IS MAKING ME SO CRAZY! I have tried restarting the iPad, and scoured the web for solutions. No luck thus far to resolve the issue, only one other person mentioning in their reviews of the HBOgo app that the latest update caused their Chromecast button to disappear as well.  It is especially troubling because the addition of the ability to cast to your Chromecast was only a few updates ago for the HBOgo app!
    Any suggestions would be greatly appreciated.  I was using the Chromecast feature on the HBOgo app almost daily & now its gone
    Thanks!!

    In iOS 6, Apple deleted Google Maps and added Apple's Maps.
     Cheers, Tom

  • How can I get my hard drive icon back on the desktop

    I just erased my hard drive on my Intel MacBook getting ready to give it to my daughter. I had the Snow Leopard install disc in the drive and used Disc Utility to erase the drive. I then installed Snow Leopard and everything went smoothly without a hitch.
    Other than -- the icon for the hard drive is not on the desktop! I can open a Finder window and see everything that should be on the drive after an erase and reinstall, but the drive is not there.
    How can I get it back?
    TIA
    I am so sorry! This question has been answered more than once. I searched but didn't find it. When I posted this, however, the list of similar questions that pops up next to the message sent me to a simple fix and now all is well.
    Again, sorry for having cluttered up the board with this question.
    Thanks.
    Message was edited by: Martin Rice

    Choose Preferences from the Finder menu, click on the General tab, and check the box for it.
    (98814)

  • Cannot share to iMovie from the Quicktime x player.  I get a pop up message that says "iMovie has not been set up".

    I get a pop-up window when I try to share a movie with imovie "iMovie has not been set up".  I have trashed the imovie plist and repaired permissions, I restarted imovie to see if that helps but to no avail.  It is not a major issue but it would be nice to have that option seeing as I will be using imovie more frequently since Avidemux does not work on lion.  All the other share options seem to function so I am a bit stumped as to why this option is not working.
    Thank you for your time.

    I get a pop-up window when I try to share a movie with imovie "iMovie has not been set up".
    Have any of you actually opened/used iMovie yet? It appears the shared file is temporarily stored in an "iMovie Drop Box" which is placed in an "iMovie Events" folder either in the "Music" folder of the current user's account on the boot drive or placed in an "iMovie Events" folder at the root level of a non-booted hard drive. It is likely that if QT X can't find/can't see any "iMovie Events" folder, it will issue the "not set up" modal message you are seeing.
    When working correctly, the QT X "iMovie" shared file is placed in the "iMoviie Drop Box" folder (even if it has to create a new folder initially) where it sits until you next open iMovie. When iMovie opens, it scans all available "iMovie Events" folders and if it detects anything in the drop box, will ask you if you want to import them. During import, the files are simply moverd from the drop box to the named_Event folder you specify. Be advised that if you delete the drop box from the "iMovie Events" folder, you may later get a different modal message telling you the system cannot find the "iMovie Drop Box" the next time you try to share a QT X file to iMovie.

Maybe you are looking for

  • Run time error while creating sales order in VA01

    Dear all, In our develpment server(ecc 6.0),while creating sales order in VA01 for a sales area, when ever entering material number and quantity and press enter, it is giving error and taking to Runtime error long text showing syntax error in program

  • S_ALR_87012360 : Transfer postings for diferred taxes

    Hi, When i run Tcode S_ALR_87012360 The taxe of some postings is not transfered, the system shows this error : Code error 2 The document contains items whose posting key is marked as payment Please can you explain me the signification of this message

  • Overriding jsf

    I'm a bit frustrated with some of the behavior for the jscookmenu. I looked online, but couldn't find any advice on how to override the behavior. What I'm trying to do is alter the javascript functions so that menus pop up on mouse clicks rather than

  • SAXParserException in parsing of

    Hi, I have a peculiar problem that I couldn't find any straight way approach yet. I have an XML that contains a tag like this:- <?xml version="1.0" encoding="ISO-8859-1"?> <copyright> The copyright symbol to use is by giving © escape sequence. </copy

  • Multiple Queries in a workbook in 2004s

    Hello folks, I am currently working on a report rendering strategy for BI 7.0 2004s installation for our organization. While exploring the various options provided by the system, I notice a whole lot of new look to the Bex Analyzer in 7.0. In the ear