TS1559 my iphone 4 wifi cannot turn after the network rest

I have tried to turn the wifi on but it doesnt work.  I restored it and still it doesnt work. what else can I do?

Turn Off Wi-Fi on your iPhone..
Reboot your Modem, Wireless Modem..
Reset the Wireless network Password..(use lower case)..
Turn On your iPhone..Turn On Wi-Fi.....use your New password for your Wi-Fi network..

Similar Messages

  • Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty

    Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty, and if its a hardware issue or software ??

    Hello HaithamOkeely,
    We've an article that provides the following troubleshooting steps that may help stabilize your iPhone.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Cheers,
    Allen

  • TS1398 my new ipad works perfectly. the iphone 5, however, cannot connect to the same wifi, can barely get a 3G signal, and the power level is at 53% after being barely used for 1\2 a day. Is this a hardware problem?? My old 3Gs was fine until it died.

    my new ipad works perfectly. the iphone 5, however, cannot connect to the same wifi, can barely get a 3G signal, and the power level is at 53% after being barely used for 1\2 a day. Is this a hardware problem?? My old 3Gs was fine until it died.

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • My wifi cannot turn on?

    my wifi cannot turn on?

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If those solutions don't work your iPhone 4s has developed a hardware problem. The permanent solution is to get it replaced.
    You can search the internet for heating and freezing solutions that might work (at least for a while).
    For example, see here: https://www.youtube.com/watch?v=nj10bz5bI6A
    Speculation: On some iPhone 4s devices there may be a flow soldering problem with the WiFi chip. After long periods of WiFi activity such as installing an iOS update (for example, iOS 7 or iOS 8) there may be a connection failure. A work-around to this is the procedure in the youTube video.
    A hardware fix may be found here:
    https://www.ifixit.com/Guide/How+to+Fix+iPhone+4S+Wi-Fi+Grayed+Out/22167

  • How to fix iphone 4s wifi grayed out after update ios 6.1.3

      how to fix iphone 4s wifi grayed out after update ios 6.1.3 ?
    for this problem , I try to fix several ways that hope can fix . it come form internet , youtube ,some one told , such as use lamp app , airplane mode , and freezing but it can not work anymore .

    http://support.apple.com/kb/ts1559
    After following the steps included with the link provided, if you are still unable to turn Wi-Fi on, please contact Apple for support and service options.

  • I cannot turn on the wifi for my 4g. The button is visible but non functional. suggestions?

    I cannot turn on the wifi for my 4G. The button is visible but non functional. Suggestions?

    Hello! Does the wifi button look greyed out? Here is a link regarding this issue: http://support.apple.com/kb/ts1559
    What you will need to do is to first to reset network settings by going to Settings>General>Reset>Reset Network Settings, NOTE: When you do this all bluetooth/wifi passwords will be forgotten. If the issue persists then we need to do a simple backup and restore.
    Follow http://support.apple.com/kb/ht1766 and http://support.apple.com/kb/ht1414 on how to backup and restore, when you restore please restore as new, do not restore the backup just yet if the Wifi is greyed out then there is a hardware issue and the device needs to be serviced. Please check your local Apple Store or call into Apple regarding service options and warranty status. Hope this helps!

  • I downloaded the new iOS 6 for my iphone 4.  I have 2 iphones on my account and after the "upgrade" text messages go to both phones.  When I send a text to my wife I recieve the same text and vise versa.  How can I fix this?

    I downloaded the new iOS 6 for my iphone 4.  I have 2 iphones on my account and after the "upgrade" text messages go to both phones.  When I send a text to my wife I recieve the same text and vise versa.  How can I fix this?

    "Sounds like you guys are using the same apple id for imessage.   You will need to create a separate id for you wife.  OR go to settings - message - receive&send and make sure your phone number is the default for both you and yoru wife.

  • As of today Iphone 4S wifi wont turn on, stays gray. IOS 6.1.3

    As of today Iphone 4S wifi wont turn on, stays gray. IOS 6.1.3

    Most likely it's a hardware failure if it's both WiFi and BlueTooth. There are some strange suggestions to try; if these don't work take it to an Apple store for exchange. If it's out of warranty it will cost $199.
    Turn off Cellular Data, reboot the phone. try to turn on WiFi.
    Put it in a ziplock bag with the air squeezed out, then in a freezer for 15 minutes (yes, this is not a joke).
    The opposite: Heat it with a hair dryer for a couple of minutes.
    All of these have worked for someone, but not for most.

  • Iphone 3G wifi not working after upgrade

    Iphone 3G wifi not working after software upgrade, no proper fix from Apple. APPLE SUPPORT - R U SLEEPING.......

    You are not talking to Apple. This is a user to user forum.
    If you're using the iPhone 3G, there will be no fix for your problem. The software you have, 4.2.1, is the end of the line for the 3G. Apple is no longer providing software updates for the 3G.

  • HT4628 I updated to Mountain Lion 10.8.5 on my 2008 model MacBook and now I cannot turn on the wifi.  I go to System Preferences, Network then click on wifi.  I click Turn Wi-Fi On but it doesn't respond.

    I updated to Mountain Lion 10.8.5 on my 2008 model MacBook and now I cannot turn on the wifi.  I go to System Preferences, Network then click on wifi.  I click Turn Wi-Fi On but it doesn't respond.
    Whats the fix?

    Forget all the suggested solutions for correcting the WiFi connectivity problems with the 2008 MacBook Pro. None of them work. Just purchase a Bear Extender (bearextender.com), install its software, turn off your computer's WiFi (and don't turn it back on!), plug the Bear Extender into your USB, and you will have consistent WiFi connection. Bear Extender never drops!

  • I cannot turn on the wifi at all any tips on how i could fix this

    i cannot turn on the wifi when i pull up the wifi tab the word wifi is grey and the wifi button will not turn on and i know it is not the screen

    http://support.apple.com/kb/TS1559

  • HT4623 my iphone wont accept my sim after the update , and so it don,t complet turning on

    my iphone wont accept my sim after the update , and so it don,t complet turning on .

    It hasnt been jailbroken has it?

  • I need to transfer data from my old iphone to my new iphone and I cannot turn off Find my iphone

    I need to transfer data from my old iphone to my new iphone and I cannot turn off Find my iphone as my icloud password is incorrect.  I have reset this several times and also cleared cookies history etc.  none of the above makes a difference.  Any ideas?

    The ONLY thing you can do to turn off Find My iPhone is to have the correct password. There is no way around it. You can get help with the password: If you forgot your Apple ID password
    If none of those methods are possible: Apple ID: Contacting Apple for help with Apple ID account security

  • I cannot turn up the volume during a phone call

    My "+" button on the side of my phone is broken and I cannot turn up the volume during a phone call. Is there any other way to control the volume during phone calls?

    After trying everything I gave up.
    But just 5 minutes ago... I dropped by phone on the floor, not from high, just sitting on my chair at my pc desk...
    And someone just called and i can hear them!!!
    So...
    for me, i guess it was really a piece inside that wasn't making a good connection and well...
    I accidentally fixed it...
    But I wouldn't reccomend you to drop it on purpose.
    But maybe go to your nearest apple store, ask them to open it and see if everythin is in place inside?
    cheers

  • HT1212 iPhone5, the screen is damaged, never synced to iTunes, locked screen, cannot turn off the device...

    iPhone5, the screen is damaged, never synced to iTunes, locked screen, cannot turn off the device...

    No. I would never take an iPhone to anyone other than Apple unless there was no alternative. You can get the display replaced on an iPhone 5 at most Apple stores for $149. If there's more damage, it will cost $229 for a full replacement. Both prices assuming you don't have AppleCare+.
    As I said, taking it elsewhere forfeits your ability to ever get it serviced by Apple. Apple does not sell iPhone parts. There are no legitimate sources for iPhone parts. All the parts you will find are either salvaged from damaged phones or counterfeit.
    If the phone is at all functional, you may be able to plug it into a computer and extract the photos and videos from the camera roll.

Maybe you are looking for

  • How to disable the custom push button in Classic ALV

    Hi All, Iam Using Classic Alv (with out classes).I have a created a push button.now at run time i want to make it dynamic . iam using REUSE_ALV_GRID_DISPLAY for ex. i have some records in my out put. i have a push button "INSERT" For first time when

  • PL/SQL Pipelined Function to Compare *ANY*  2 tables

    I am trying to create a pipelined function in 10g R1 that will take the name of two tables, compare the the tables using dynamic SQL and pipe out the resulting rows using the appropriate row type. The pipelined function will be used in a DML insert s

  • Unable to read from .csv having field in double quotes

    Hi to all, I am trying to reading data from .csv file using JDBC it was reading perfectly when fields are without quotes i.e. Field1 and unable to read with filedname as "Field" instead giving Exception Column Not Found, please help me out with this.

  • BI Web Serivice on cross table created in WebI Rich Client has no result

    Hi experts, I'm actually trying to build some BI Web Services based on cross tables in Web Intelligence. The aim is to use them in Xcelsius for dashboarding. Unfortunately sometimes the web services do not deliver any result. I think the problem only

  • ARTICLE MASTER

    hi everyone,        i had a doudt in article master(mm42) in this when iam giving matnr and werks(for exp : tg51) in the selection screen and press enter it shows some data in tabstrips and in that if we click on 'LOGISTICS DC'  in that if u come dow