TS1559 none of your resolutions do work... problem came out after 1 year and 5-6 days after i bought the 4s (kind of strange)... hundreds of similar posts are there all over the internet; it has to be a product defect!!! AND NOW??

i look forward to get a free exchange or at least a free repair service to solve this problem! or maybe it's possible to solve it by releasing some kind of update?? but please do not disappoint all the 4s customers with the same problem as mine, by letting them pay for something which isn't their fault.

WHAT PROBLEM?  You still have said absolutely nothing about what is wrong!  Nobody here can possible help you solve a technical issue if you won't even say what it is that is wrong in the first place.
I have zero problems with iOS 7 on my iPhone 5 and iPad 4, and many millions of other iOS 7 users on all sorts of iOS devices are also not having any problems at all, so nobody here has any way of knowing what your problem is if you will not tell us.
If you have a hardware problem and are out of warranty, then yes, Apple will charge you for an out of warranty replacement.
And no, you cannot downgrade iOS - Apple has never supported doing that.

Similar Messages

  • The iPod on my iPad has frozen up. All I see is a picture of the album I was lasting playing. I have tried tapping all over the screen - nothing.

    The iPod on my iPad has frozen up. All I see the picture of the last album I was listening to. I have tapped all over the screen and...nothing.

    You need to restart your device. Press and hold both the home and lock buttons until the apple symbol shows up.

  • After down load there are add all over the place, firefox is unusable.

    my firefox got invaded by triviot or something like that so i uninstalled it and then downloaded it fresh. the download had more problems 1. wes is in the search box under fireball opening screen. now this is in the line where the site you are using goes. " http://lp.getfree-soft.net/mpc________/?o=42&campid=14406&creaid=5552&reqid=535945901" different adds are popping up all over the screen its a mess...

    Could you:
    (1) Visit the Windows Control Panel, Uninstall a Program and click the "Installed on" column heading to group by date. I suspect you will find unwanted and probably undisclosed bundle items (AKA garbage) that snuck in with some free software. Remove what you can.
    (2) Scan using some of the effective free cleanup programs listed in our support article: [[Troubleshoot Firefox issues caused by malware]].
    Note: don't remove places.sqlite or bookmarks-2014....json files that the cleaning programs may recognize as having history or bookmarks of bad sites because this could clear all your bookmarks.
    (3) Start Firefox back up again and check for any lingering problem extensions on the Add-ons page. Either:
    * Ctrl+Shift+a
    * "3-bar" menu button (or Tools menu) > Add-ons
    In the left column, click Extensions. Then you can disable all nonessential or unrecognized extensions.
    Usually a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
    (4) Finally, to reset your home page, search service, and new tab page to their defaults, you can use this one-click solution: [https://addons.mozilla.org/firefox/addon/searchreset/]. If you prefer to do that by hand, we can post the steps.
    Does that flush the ads?

  • Flash Captions are bouncing all over the screen

    Hello, I am trying to create a .swf file with captions. When I open the file up in an ordinary window, the captions are fine, but when I go full screen, the captions start wildly bouncing all over the place. I am using an XML file for my captions (shown below) and a QuickTime HDV file for my footage. Any tips on how to stop the bouncing captions??
    <?xml version="1.0" encoding="UTF-8"?>
    <tt xml:lang="en" xmlns="http://www.w3.org/2006/04/ttaf1"  xmlns:tts="http://www.w3.org/2006/04/ttaf1#styling">
    <head>
    <styling>
    </styling>
    </head>
    <body>
    <div xml:lang="en">
    <p begin="00:00:00.00">Hello, my name is Avedis Seferian and I am the President and CEO of WRAP.</p>
    <p begin="00:00:05.42">On behalf of our entire WRAP team, I want to thank you for taking part in our</p>
    <p begin="00:00:11.36">As you know this is a crucial topic in the garment sourcing industr</p>
    <p begin="00:00:14.96">and one that has become very prevalent over the past few years due to a string</p>
    <p begin="00:00:20.00">of recent</p>
    <p begin="00:00:21.47">tragic fire incidents around the world</p>
    <p begin="00:00:24.84">Even before these incidents however</p>
    <p begin="00:00:27.22">WRAP has been a pioneer in the field of fire safety training in the garment sourcing industry.</p>
    <p begin="00:00:31.09">WRAP has been a pioneer in the field of fire safety training in the garment sourcing industry.</p>
    <p begin="00:00:32.39">We launched this course back in 2011</p>
    <p begin="00:00:35.35">and since then have trained hundreds of workers in factories in Bangladesh</p>
    <p begin="00:00:40.18">Pakistan, China, and are looking to launch this course in other locations</p>
    </div>
    </body>
    </tt>

    If these occur on all sites, you may have an unwanted extension (or more than one) that is injecting the ads into sites. Try this:
    Disable ALL nonessential or unrecognized extensions on the Add-ons page. Either:
    * Ctrl+Shift+a
    * "3-bar" menu button (or Tools menu) > Add-ons
    In the left column, click Extensions. Then, if in doubt, disable.
    Usually a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
    Does that flush the ads?

  • Adobe Muse Not publishing site as designed - elements all over the place.

    Hi - I've been working on a landing page for a site and although the design is exactly as I wish - when I publish the site various elements are thrown all over the page.
    I've attached 2 screenshots illustrating this, and a URL.   www.marchdental.ca/march-dental-welcome.html
    Thank you for any help you can give me!
    Rob

    Hi David and Mr. Burro - many thanks for your replies - my apologies for not replying sooner!
    In fact, David - you've nailed it.  I had inadvertently pinned some elements to the footer and so they would drag downward in larger browser windows.   My thanks to you for pointing this out!
    Cheers!
    Rob

  • Ipad bounces all over the place

    how do I stop my ipad from bouncing all over the place?

    Sorry, more information needed. Please define "bouncing all over the place". If you can be as precise as possible, someone may be able to help sort your problem

  • Webpage rendering images all over the place after 8.0.X

    Whenever I open a web link from the financial 'stock' application, it loads normally with small fonts as usual but when double-tabbed to magnify to full screen, two things will occur:
    1. the keyboard pops up which is very annoying
    2. images rendered all over the place in magnified full-screen mode.
    Just updated to 8.0.2 and problem still persists.

    Hi ..
    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    No data is lost due to a reset.

  • My cursor is moving all over the place like someone else is controlling it, it has gone thru my mail and deleted everything. Sometimes it works ok, what should I look at?

    My cursor is moving all over the place and it is almost acting like someone else is controlling the track pad. When I was opening and deleting mail this morning and I stopped on an email I wanted to read it went ahead and deleted it and all the others that hadn't been opened yet.What should I look at to fix this problem, I already tookk it to a computer repair that couldn't find a virus of any sort. And, it sometimes works fine.

    Kacia
    Have you tried adjusting the tracking and scrolling speeds for the trackpad? You can find that in Sys Preferences.
    You may also want to reset the PRAM. To do this shutdown the machine. Hold down with your left hand the option and command keys, power the machine on and immediately with your right hand hold down the P key with your little finger and the R key with your index finger, so you have the option+command keys and the P and R keys held down, wait until you hear the Apple chime twice then release all keys, let the machine boot up. Try this and see if it helps. If you contiune to have this issue I would suggest taking it to the Apple store ASAP and have a Genius remedy this issue. Hope this may help.
    Joseph

  • I am producing a 3d animationproduction. W want to work with artist all over the world. Is final cut server a good solution to use for such a production. I dont have a lot of computer nollege myself. Please can sombody advice me? tenaks

    I am a producer  and  starting with a 3d animationfilm. We want to work on it with 3d Artist from all over the world. Would final cut sever be a good program to use? I dony have many technical nolledge. Good sombody advice me? Thanks Will

    Only if all your artists have access to your local network, or an FTP server that FCSvr also has access to.

  • I have a comment.  I am very upset with Photoshop and all your tutorials regarding the quick select tool.  I have watched many tutorials and read instructions until I am blue in the face.  This tool does not work.  It is all over the place and all of your

    I have a comment.  I am very upset with Photoshop and all your tutorials regarding the quick select tool.  I have watched many tutorials and read instructions until I am blue in the face.  This tool does not work.  It is all over the place and all of your tutorials make it look so simple.  How can you advertise this as a viable tool when it just doesn't work?

    It is all over the place and all of your tutorials make it look so simple.
    This is a user to user Forum, so you are not really addressing Adobe here, even though some Adobe employees thankfully have been dropping by.
    How can you advertise this as a viable tool when it just doesn't work?
    Concluding something does not work because you fail at using it is not necessarily always justified.
    The Quick Selection Tool certainly has limitations, but your post seems to be more about venting than trouble-shooting – otherwise you might have posted an image where you failed to get an expected result.

  • Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

    Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

    There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not apply in your case.
    1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
    2. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and in that case the unit must be serviced or replaced.
    3. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
    4. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
    5. Reset the System Management Controller.
    6. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
    7. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
    8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to  behave erratically. If you're using such an adapter, disconnect it and test.
    9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
    10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
    11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

  • Update to IOS 6 has been a nightmare. Facebook would allow me to save pictures unless I granted access to my foto album. Does this mean my pictures are going be planted all over the web? The safari keeps crashing and loading is slow.

    update to IOS 6 has been a nightmare. Facebook would allow me to save pictures unless I granted access to my foto album. Does this mean my pictures are going be planted all over the web? The safari keeps crashing and loading is slow. Most infuriating is that YouTube was deleted from my entertainment apps and I now have to pay for it if I want it back!! This is a bloody disgrace.

    Back up all data.
    Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
    When the OS X Utilities screen appears, follow the prompts to reinstall the OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

  • Which iphone version will work all over the world?

    Hello there.Im from Pakistan.Need some info related to iPhone. Next month i'am going to Canada and planing to buy an iPhone 6 from there.. So im confused which version will work fine here in pakistan.. Kindly guide me about the version which should i buy. I want a version which works all over the world.. Waiting for reply, thankyou!

    An unlocked iPhone should do the trick. You need to get it in an Apple Store. I have traveled around the world with my British unlocked Iphone and I've had no problems switching between sims.
    Good luck! By the way, revise your phone while you are on the shop, you don't want to find any defects when you are back in Pakistan.

  • What is causing this?  The file "iTunes Library.itl" does not appear to be a valid iTunes library file. iTunes has created a new iTunes library and renamed this file to "iTunes Library (Damaged) 4".  This happens everytime I start iTunes lateley.  Help!!!

    Everytime I open iTunes lately...I get all my music thrown out of the library and this annoying message come up...The file “iTunes Library.itl” does not appear to be a valid iTunes library file. iTunes has created a new iTunes library and renamed this file to “iTunes Library (Damaged) 4”.  Is this how an apple works?  It doesn't?  Why all of a sudden is it doing this?  Please help.  Thank you.
    David

    Did you happen to bring this iTunes library over from a windows machine? You might read this kb article to see if it helps http://support.apple.com/kb/HT1451

  • Inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model

    inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model

    Hi,
    I would try a Safe Boot first.  (This will take longer than a normal Boot and you will need to Restart afterwards).
    If it were an older OS I would also suggest going to System Preferences > Displays and making sure the display is set to Millions.  (My MacBook Pro does not have this option in Snow Leopard so I did presume Snow Leopard does not have it).
    With some laptops there have been some issues with the cable up the back of the screen pulling loose with regular and frequent use of the lid, but this will not apply to you based on your specs.  (it does take time to appear and is also somewhat rare). However it seems enough contact with the camera can make it appear in System Profiler and power it on but not give a pic.
    If a Safe Boot does not work I would also try a PRAM reset.
    Shut down the computer.
    Restart it holding down Apple/CMD (or ⌘)+ALT( ⌥)+P+R Keys until you have heard three Start Up Bongs.
    This is actually "less" destructive in that it clears less memory items than Safe Boot but they are different enough to warrant trying.
    Do you have an older version of iGlasses installed ?
    The one for Leopard does not work for Snow Leopard.
    Do you have  Web Browser open ?
    This may point to  Google Video Chat Plug-in and Flash Conflict.  It would be rare to allow another app to access the camera even if not displayiong a Pic. 
    (Chrome Installs the Plug-in as does the standalone download).
    Knowing  what "any application" exactly you are trying might help us pin it down.
    Any additional downloaded  apps that can use the camera ?
    Do you happen to have something balck in front of the camera ?
    8:20 PM      Sunday; October 9, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

Maybe you are looking for

  • Re: (forte-users) Fusion for the VAR

    Hi, It is a good idea. In fact, I think that how Forte is going to integrate her own suite of app. too. ( I kind of recall that there is a speech on this topic in Forum ). However, as Forte will most likely goes toward Java, I would suggest that you

  • Why does a track not pan when you send it to Itunes?

    I'm trying to pan two differnt tracks directly to the left and directly to the right. but when I send it to I tunes both tracks end up evenly to the center. how do I fix this? -gootse

  • Regarding Sending Mail while an employee is hired.

    Hi all, Currently we have an process of sending a mail to a set of Email Address while an employee is hired using the Transaction PA40. Now the requirement is to remove some Email Address, so that the concern person would get the mail about hiring. H

  • IDOC to spreadsheet

    Hi, Please go through following requirement. Scenario : Idoc to csv/spreadsheet. The spreadsheet will have 2 tabs, first will be containing configuration info and the 2nd will contain data. Can you please help me with the ways it can be implemented.

  • Thunderbolt Not Working

    I have had MacBook Air and MackBook Pro and love the products   I now have a brand new MacBook Air and each night when i get home from work, I plugin the Thunderbolt to HDMI connector and connect my Dell P2210 monitor.  Tonight when I get home, the m