TS1559 Wi fi turn on option Grey

i performed network restore settings...
restored itunes with latest software.. but still unable to turn on Wi Fi from grey... how can it be done ? any solution please

Hi there,
Towards the end of that article is some additional information in the event that the troubleshooting does not resolve the issue.
Additional Information
If you are still unable to turn Wi-Fi on, please contact Apple for support and service options.
-Griff W.

Similar Messages

  • After I installed 10.6.8, my HP Officejet lost the ability to print 2-sided.  I installed the latest HP drivers for Snow Leopard, but the 2-sided option is turned off and greyed out.

    After I installed 10.6.8, my HP Officejet 7310 lost the ability to print 2-sided.  I installed the latest HP drivers for Snow Leopard, the 2-sided option shows up in the print window but is turned off and greyed out.  Also the scan function won't let me scan at any density greater than 150 dpi.  I have talked to Applecare and to HP tech support and been told "too bad."  Any help would be appreciated.

    THANK YOU!  And who are you?  I spent a couple of hours on the phone with Applecare and with HP Tech Support and they couldn't fix what you did in a few words.  Many thanks!  John

  • TS1559 my wifi wont turn on, stays grey.Rebooted,restarted, restored.. any suggestions

    My wifi will not turn on, stays grey. Rebooted,restored and restarted. Any suggestions?

    Everything in that article is prior to restoring as new.  If the OP has already restored as new, none of the steps in that article will really matter.  This is a known issue in a small percentage of iPhones. 
    Also, the OP linked to this forum FROM that article you quoted.  However, in the future, if the OP has not tried anything, and hasn't linked from that article, definitely refer them to that article.

  • My iphone5s screen turned blue then grey. i've just updated it to ios7.1 two weeks ago. tried restoring through itunes but it says error 40. how to fix?

    Hi, i've just updated my iphone 5s to ios7.1 two weeks ago, however, 4 days ago, my phone's screen turned blue then grey. I have tried restoring it through i tunes but itunes keep saying error 40. Can this still be fixed? or does it need a replacement?

    Hey everyone in Apple world!
    I figured out how to fix the flashing yellow screen problem that I've been having on my MBP!  Yessssss!!!
    I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
    I followed the instructions on this page and here's what I did:
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process.  Since I did that, my MBP boots up just like normal.  No flashing yellow screen anymore!!   
    (Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
    Let me know if this works for you!
    Elaine

  • Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?

    Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?
    Unfortunately do not know the operating system since I never updated anything and I can't get in to it.
    Thanks for your assistance.

    If you want to preserve the data on the boot drive, and it's not already backed up, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
    There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
    1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

  • Windows 8.1 Mobile Device Management and SCCM 2012 R2 - 'Turn on' option missing

    I am trying to test a virtual desktop with SCCM 2012 R2 integrated with Intune. There is no Configuration Manager client on the workstation, the Intune subscription is configured and enabled for Windows enrolment, AD is synchronizing with Intune, DNS has
    the enrolment record added and resolves, the user can logon to Intune from the client using Internet Explorer and the client has had the registry key added with the DiscoveryService  configured to manage.microsoft.com. The problem is that on
    the 8.1 workstation in Workplace Settings the only option is 'Join' and the 'Turn-on' option is missing. How do I get it to appear?

    Yes I am using an activated version of 8.1 Enterprise, it is in a workgroup and I am logged in as a member of the local Administrator's group but not Administrator. I even joined the domain again and then removed it. Still there is only the 'Join'
    option and no 'Turn on' option. This is driving me nuts.

  • Select option greyed out for fields of custom DataSource (rso2, rsa6)

    Hi
    Why are several fields, in my custom DataSource (created in rso2) not available for select?
    I do not think this is a permission issue, since several fields are selectable, but not all fields.
    It is not the data type, since I see other custom DataSources that have the same data type, and it is selectable as a select option.
    This is not a DataSource that was provided by SAP, it is completely custom, and uses a custom data definition (defined as a structure via se11), and a custom function.
    I have read the responses to similar questions, but have not found an answer that explains how to make the field selectable for select.
    What determines which fields can be selected for selection, and which fields have this option greyed out (not selectable)?
    I have come across multiple answers, for similar questions, that suggest an abap program to directly update table roosfield.
    Is this safe?
    IF I choose this route will I need to run the update program on production, or will the change it makes to my dataSource transport with my transport?
    (I can test this).
    What I most need to know is If this suggestion is safe, or if it has side effects?
    Thank you

    Hi Eileen,
    In Least case to enable the selection for the fields with the below program:
    Below code is for your reference which will use to unhide objects in RSO2 or RSA6 for Data source( in code for BELNR, KUNNR, VBELN, BUDAT fields are unhiding for 0fi_ar_4 data source selection option) . Still need any clarifications let me know.
    SE38: Create a program for ref below code.
    REPORT ZNP_SELE_DS.
    tables: ROOSFIELD.
    UPDATE ROOSFIELD SET SELECTION = 'P'
    WHERE OLTPSOURCE = '0FI_AR_4' AND   OBJVERS = 'A' AND FIELD = 'BELNR'.
    UPDATE ROOSFIELD SET SELECTION = 'P'
    WHERE OLTPSOURCE = '0FI_AR_4' AND OBJVERS = 'A' AND FIELD = 'KUNNR'.
    UPDATE ROOSFIELD SET SELECTION = 'P'
    WHERE OLTPSOURCE = '0FI_AR_4' AND OBJVERS = 'A' AND FIELD = 'VBELN'.
    UPDATE ROOSFIELD SET SELECTION = 'P'
    WHERE OLTPSOURCE = '0FI_AR_4' AND OBJVERS = 'A' AND FIELD = 'BUDAT'.
    Thanks & Regards,
    Srinu.Rapolu

  • When OpenGL stopped working (option greyed out)

    I discovered a weird bug in Photoshop 12.1 x64 with nVidia graphic cards and what´s causing it:
    Problem (on all off my PCs):   OpenGL support in prefs / performance is greyed out, no shadow below open documents visible ( == OpenGL not working).  After deleting prefs.psp and restarting (as the www says), OpenGL support was working again, on next restart: no support - option greyed out again.
    Solution: if deleting the prefs file or the whole prefs folder don´t work, check if you have a custom workspace with the brush floating panel open.
    If so, close it and remvoe it from workspace, restart PS and.... OpenGL support is working again!
    I could reproduce this bug on all of my PCs, no matter what type of GFXcard and driver version is installed.
    Maybe that bug occurs only with Win7 x64, PS 12.1 x64 and nVidia cards, but removing the brush panel solved it on every machine!!
    I´ve opened a support ticket and provided Adobe with screenshots of the working and not-working states... maybe they can fix this with an update!
    This are my system specs for the tested machines:
    workstation 1:
    Intel i7 980X HexaCore (with SMT)
    ASUSP6T7 WS Supercomputer
    6 x 4GB DDR3 triple channel
    nVidia Quadro CX
    3x WD SATAII HDDs
    dual monitor
    Wacom Intuos4 XL
    3Dconnexion SpaceExplorer
    contour Shuttle Pro2
    workstation 2:
    Intel i7 975 Extreme Quadcore (with SMT)
    ASUS P6T Deluxe V2
    6 x 2 GB DDR3 triple channel
    nVidia GTX 580
    2x WD SATA HDD
    both systems running on:
    Windows 7 x64
    Mastercollection CS5.5
    latest updates for OS, CS5.5 and GFX drivers...
    Maybe this threat helps .... ;-)

    I did heavy testing the last days including systems at my home and at a friends office.
    In fact, I can´t tell, what´s causing this, but it seems to depent on a certain type of installation. But first the tested systems:
    nVidia GTX480 SLI, Win 7 x64, CS5.5 - working
    nVidia GTX580 Win7, CS5 - working
    ATI HD4870x2, Win7 x64, CS5 - working
    nVidia GTX580, Win 7 x64, CS5.5 (update from CS4 ->CS5 -> CS5.5) - not working
    nVidia GT240M, Win7 x64, CS5.5 - working
    ATI X1900XT - XP SP3 x64, CS5 - working
    nVidia QuadroCX, Win 7 x64, CS5.5 (update from CS4 ->CS5 -> CS5.5) - not working
    ATI HD4390, XP x64 SP3, CS5.5 (update from CS4 ->CS5 -> CS5.5) - not working
    nVidia GTX480, Win 7 x64, CS5.5 - working
    On each system I installed the latest driver & updates, rebooted it and followed the same procedure:
    1 - removed (==renamed) prefs folder
    2 - start PS
    3 - open prefs / performace
    4 - config OpenGL for "Advanced"
    5 - closing prefs and restarting PS
    6 - checking OpenGL when active: pt7
    7 - Open menu "Window" and and select "Brush" (or press F5)
    8 - docking Brush-panel from original position to the tools-panel on the left
    9 - saving workspace as "BrushTest"
    10 - restarting PS
    11 checking OpenGL
    Since you have all older Versions still installed when you update i.e from CS4 to CS5 I tried this with every installed version.
    On my two office WS I have CS4, 5 and 5.5.
    After trying this with the GTX580 with this results: CS4 working, CS5 working, CS5.5 not working - I today started PS 12.1 for working and saw that tiny shadow below the document - WITH the brush panel open!!
    Checked it and now its working proper. I have no clue what has changed over night but it did it...
    My primary WS with the Quadro card still refuses to actived OpenGL with the opend brush-panel, no matter what I try.... maybe I gonna deinstall that CS4 to 5.5 mess and get me another license for the full CS5.5 instead of the update from the update...

  • No Sound; All options greyed out

    Output options for sound are greyed in Preferences and the desktop sound icon. In the Audio MIDI Setup window, the default output says Built-in Output and the System Output also says Built-in Output. No other options available for either.
    Just below halfway down there is Audio Input, which has a bunch of info on the left, but on the right where it says Audio Output, there is just a greyed out message that says Output is Not Supported.
    I also tried the option/apple/p/r, got the three chimes, but sound is still greyed out.
    Any gurus out there who can tell me what simple thing I did to cause this, or is it a hardware/sofware bug?
    Macbook Pro Core Duo 2   Mac OS X (10.4.8)   2 gig SDRAM 2.33 GHZ Core Duo 2

    it doesn't matter if you've used the ports or not.. there is a sensor inside the audio ports that will automatically switch your audio in and/or out into digital mode if it trips and then 'thinks' there's a digital cable connected. basically, if you open your sound control panel and display the output pane and it says 'digital out', and the volume control (and everything else) is greyed out, and it says something about this device not having volume control... then this is exactly the situation where the port sensor has clicked on to digital and is staying there. unfortunately, the sensor seems to be quite fragile and there are plenty of users that are suddenly wondering why they have no sound, and why the sound ouput only says digital and the options are greyed out. it would be at least a comfort to be able to say that this only can happen if you've been plugging things into the port (such as headphones), but I've heard of this happening to people regardless.
    anyway, look for the signs I mentioned: the digital output option being the only available choice in the sound control panel, with options greyed out. and also a red light coming out of the port. if this is happening to you, then you need to get the machine fixed cos that sensor is jammed.

  • My mac book air turn on with grey apple icon and spining wheel. then it wont turn off.

    my mac book air turn on with grey apple icon and spining wheel. then it wont turn off.pls help

    Have exactly the same problem with my wife's MacBook Air. After restaring in Restore mode and trying to repair the disk (Disk Utility showed errors in the verification), the system tells me to backup as much data as possible (how?), re-format the disk and restore backed-up files. Error comes up when "updating boot support partitions for the volume as required".
    Original restart action was done due to software update requesting it, if I remember correctly, iTunes was updated.
    I don't want to start a painful back-up procedure (although I do regular back-ups): how should I know, where iPhoto stores it's data or where my mails are (yes, still using local mail)? How can I access the data if I can't boot?
    My iMac's disk crashed also a couple of months ago and I'm still recovering. I have four Apple devices, two of them have failed. Can Apple afford such a ratio?

  • My wifi option greyed out and when i checked out wifi adress it shows N/A . how would i solve this ?

    my wifi option greyed out and when i checked out wifi adress it shows N/A . how would i solve this ?

    http://support.apple.com/kb/TS1559

  • Internet Options greyed out in Internet Explorer 9 because of GPO settings in Windows 2008 AD

    Internet Options greyed out in Internet Explorer 9 because of GPO settings in Windows 2008 AD.
    I am trying to find out what GPO setting is causing this so I can change I.E. settings at a desktop running Windows 7.
    A GPO has I.E. locked down so settings are greyed out for Intranet settings so I can't change Intranet settings.
    How do I enable so I can save changes with a GPO?

    Classic GPO using Administrative Templates, is designed to do exactly that (disable the UI).
    Previously, you could use IEM in preference mode.
    Now, you'll need to use GPP, but there are a couple of limitations.
    Check the IE10 IEAK documentation (it's useful for understanding what you can do with GPP)
    http://technet.microsoft.com/en-us/library/jj890998.aspx
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • The hyperlink in the control panel has disapeared did I inadvertanly turned an option off??

    The hyperlink in the control panel has disapeared.  It was there yesterday but today it is gone.  Did I inadvertanly turned an option off??

    Thank you for the response, I found that out and it indeed, returned the hyperlink option to the control panel.  However I still am unable to “see” my child pages in either Preview or Preview Page in Browser.  They are visible in the Plan Mode.
    Thanks again.
    Les Schwartz

  • OS X Mavericks: display randomly turning white/brown/grey [no resolution issues]

    Hey folks,
    I discovered a very strange problem the last few days while using the internal and an external VGA Monitor on my Macbook Pro (mid 2010, 8GB).
    I'm running on OS X Mavericks with the latest updates and the system runs pretty smooth.
    What I discovered is as follows:
    Using any VGA monitor that I own, sometimes both (internal and external) display turn white (or grey or brown, just displaying a solid colored screen). This occurs with literally every display I used externally and doesn't occur while just using the Macbook Pro without an external display. This didn't happen before on Mountain Lion, neither did it happen the first weeks on Mavericks (I've been using it since it's released). After this happening, I have to do a forced reboot. This issue does occur randomly within the daily usage.
    Furthermore, I don't have any resolution issues as many user claimed about this already while running OS X Mavericks.
    From looking at the system I can tell that the RAM is not damaged (also because this doesn't happen while using the MB without external display). I also tried other RAM, issue remains reproducible.
    I haven't found any solution on the internet, so I decided to post my problem here.
    Hope there is anybody out there who might be able to help me out.
    Yours sincerely

    Same problem here https://discussions.apple.com/thread/5613306 FIX IT APPLE!

  • Hello I just found a problem with my Ipod nano 6th generation. It worked fine an hour ago but then the screen turned a dark grey. Did the restore through Itunes and then it went white. But now it's totally unresponsive and seems to be off even when it is

    Hello I just found a problem with my Ipod nano 6th generation. It worked fine an hour ago but then the screen turned a dark grey. Did the restore through Itunes and then it went white. But now it's totally unresponsive and seems to be off even when it is plugged into itunes. Can't even restore it. I get Error 1415?

    Hi clarity,
    Welcome to Apple Support Communities.
    You may want to first try removing and reinstalling the latest version of iTunes by following the steps in this article:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    If you continue to receive the error message when connecting your iPod, see this article for more troubleshooting tips:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/TS1814
    Best,
    Jeremy

Maybe you are looking for