TS1567 iPhone Driver Problem

Hi Guys....I have iphone 4 and i use windows 7 ultimate 64bit
For some reason i can not get iphone to be listed under "My Computer" and i can not syn photos taken on the iphone to the computer using iTunes. I read many article:
https://discussions.apple.com/thread/2600731?start=0&tstart=0
http://support.apple.com/kb/TS1538
and none seems to be solving my problem...despite having similar symptoms as others: iphone has an exlamation mark in Device Manager. and not being able to update iphone Driver.
I did all the iTunes reinstallation according to instructions in the above form...but no results. restated iphone, forced restart it, restarted Apple Mobile Service....etc.
I used "iexploerer" from Macroplant and it open the iphone folders but within a second or two it crashes....
Can someone from apple tell me what the **** is going on... i had this problem for more than a year and now i am fed up with it. Many people are suffering from it and apple does not seem to really provide and easy solution...how strange for a company that ought to provide the best UI experience to its customers!!!!!

PalSalih wrote:
does apple listen to our feedback here or not .... i wonder!!
Simple answer, from the Terms of Use which we all agreed to when signing up here:
Views expressed on the Site are not endorsed by Apple.
Apple does not prescreen information submitted by users of the Site ("Submissions"). Apple retains the right, but not the responsibility, to edit or remove any Submission, including those deemed by Apple to violate the Agreement. Apple will make good faith efforts to investigate allegations that Submissions violate the Agreement but (a) makes no warranty to you that it will edit, remove, or continue to permit the display of any specific Submission, whether or not subject to such allegations, and (b) will have no liability whatsoever for editing, removing, or continuing to permit the display of any Submission whatsoever.
Apple involvement. Apple does not formally provide technical support on the Site. However, any information that is provided by Apple or Apple employees is offered on an "AS IS" basis without warranties of any kind.
If you have feedback for Apple, it can be left here.

Similar Messages

  • Iphone driver problem for itunes 64-bit

    I am having problems with the driver for my iphone to connect with my hp laptop, running on windows 7 home edtion. I recently installed the 64-bit version of itunes onto my laptop and then proceeded to update my iphone to the latest version aswell, since doing this i can no longer access my photo library on my phone and my computer keeps telling me that there is a device error- device not installed error cable unplugged? i dont no what to do i deleted the drivers (as there were 2 in the list) and then reinstalled but same error. It is really bugging me and has taken up my last 2 days of searching on the internet for answers. should i just forget the 64-bit itunes? ive read alot of people are having problems? please can someone help??

    Instead of having Apple Mobile Device USB Driver, i have a driver called MTP USB Device

  • Apple iPhone Driver Windows 7

    There's lots on the forum about iPhone driver problems with Windows 7, but I've been unable to resolve my problem and would appreciate clarification...
    There are two devices that show up when I plug in my iPhone 4S. One is the Apple Mobile Device USB Driver. This device is never a problem on my machine, and based on what does and doesn't work, is what provides access via iTunes. The second, the Apple iPhone, makes the camera roll visible in Windows Explorer. This one is always a problem on my machine, requiring that I use the troubleshooter to reload the drivers. The troubleshooter is always successful in loading drivers, and always loads the same drivers (WpdMtpDr.dll, winusb.sys, WUDFRd.sys, WpdMtp.dll and WpdMtpUS.dll).
    What I've ruled out:
    1. The cable works fine on my laptop (running the same version of Windows).
    2. The Apple Mobile Device USB Driver is never a problem in Device Manager and shows the correct Apple drivers (dated 12/13/2012).
    3. I've uninstalled and reinstalled iTunes several times (too many).
    4. Clean USB environment. No defunct devices, no other problem devices. No other smartphones.
    What I haven't ruled out:
    1. Canon Powershot A650 driver could be a conflict. However, I don't connect the camera nearly as often, and the Apple iPhone driver fails whether or not I've connected the camera in the interim. I've also had both connected at the same time without experiencing software issues. Is there an empirical way other than trial-and-error to identify software conflicts?
    2. Photos from other devices. Is this just on the camera roll? If so, I can rule it out. If not, it's sort of unbelievable.
    What I don't understand:
    1. How does the passcode enter into loading drivers? I understand not being able to access certain things, but not failing to load a driver.
    Thanks in advance for your suggestions. No fear of editing the registry or manipulating system files. Apologies if this should be posted in a different forum.

    I had similar problems and found a useful site.  My iPhone 4s and iPad weren't found by iTunes.  Tried the suggestions below and my problem was fixed.
    http://randomwindowstips.wordpress.com/2009/12/08/windows-7-itunes-9-software-is -not-installed/
    Hope this helps!

  • HT4759 I had to change my apple password to fix hard drive problem in my iPhone and now I cannot connect date stored in iCloud as my password has changed.  How do I plug in new password to iCloud to be able to retrieve data from my MacBook Pro to my I pho

    If you change your apple password how do you notifly icloud to resync everything?  Forgot my apple password, had to change it due to hard drive problem on my iphone 4 which had to be totally erased then rebouted and now works but cannot download from my computer/icloud due to password change.  So how do I orchestrate the change of password to icloud/computer to allow all to sync together?

    If you use Lion, boot into your recovery pressing Command and R buttons, press "Utilities" menu, open Terminal and write:
    resetpassword
    If you have Snow Leopard, boot into your install DVD pressing C button, click "Utilities" and press Password Reset

  • Will Apple stores in Germany replace your iPhone if there is internal hard drive problems from a phone from the US. I am studying abroad and won't be home until December

    Will Apple stores in Germany replace your iPhone if there is internal hard drive problems from a phone from the US. I am studying abroad and won't be home until December

    You can try, but the iPhone warranty terms state that Apple "may" restrict warranty/service to country of original purchase...key word here is "may".
    Good luck.

  • I have lost my info for my ipod due to hard drive problem. Can I upload the info on my ipod to my computer. I don't want to lose what is on my ipod.

    Lost ipod info on computer due to hard drive problem. Can I upload info on ipod back to my computer and how do i do it.

    - Transfer iTunes purchases by:
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    - Transfer othe music by using a third-party program like one of those discussed here:
    Best iPod to PC
    - Create a backup of the iPod by connecting the iPod to the computer.  Right click on the iPod under Devices in iTunes and select Back Up.
    - Restore the iPod from thzt backup and sync a necessary.

  • Apple Mobile Device USB Driver has a driver problem MTP USB DEVICE ACCESS IS DENIED

    I can't do anything i tried to update driver and nothing here is what all it says apple mobile device usb driver has a driver problem MTP usb device access is denied

    DON'T DO ANYTHING LISTED BY APPLE SUPPORT.
    Just try this -
    Start computer in safe mode, go to device manager, locate Iphone, Ipod, or Apple Mobile Device Manager. Update/install driver in safe mode and - voila, successfully installed and no more access denied errors.

  • Hard drive problem...... Please Help

    Hard drive problems
    I am sure it is due to my error or mistake but I received a new Maxtor III touch as a replacement for my failed drive yesterday after connecting it I went to Maxtor one touch manager software that came with it and the drive did not appear in the window so then I opened disk utilities and copied my notebook hard drive over to the Maxtor ran permissions on each drive and then closed down my system ! today when I opened my Powerbook with the Maxtor on it gave me the grey screen 2x so I disconnected the Maxtor ran permissions again and everything was fine until i power up the Maxtor and Grey screen again! Help How do I fix this?????

    Maxtor one touch III firewire 800 its connected to my Titanium G$ Powerbook I am beginning to think its just another drive failure

  • Computer is balky random freezes across apps. Two hard drive cleans later (their scan reveals no hard drive problems) photo shop won't work at all, magic touch mouse inoperable and their diagnoses is corrupted data? Anybody heard of this?

    Computer is balky random freezes across apps. Two hard drive cleans later (their scan reveals no hard drive problems) photo shop won't work at all, magic touch mouse inoperable and their diagnoses is corrupted data? Anybody heard of this?

    Well, yes, data does get corrupted sometimes.
    The trick is finding what data.
    By 'cleaned' are you therefor meaning that the drive has been erased and the system re-installed?
    Because that's the quickest way to deal with such a situation.
    Back up the system first of course,
    Add back 3rd party apps one at a time in case one of them is causing the problem.

  • Lenovo T400 screen goes dark issue, some video driver problem

    Lenovo:
    Motherboard:
    CPU Type: Mobile DualCore Intel Core 2 Duo P8600, 2400 MHz (9 x 267)
    Motherboard Chipset:  Intel Cantiga GM45
    System Memory: 1992 MB (DDR3 SDRAM)
    BIOS Type: Phoenix (08/19/08)
    Display:
    Video Adapter: Mobile Intel(R) 4 Series Express Chipset Family 
    Video Adapter: Mobile Intel(R) 4 Series Express Chipset Family 
    3D Accelerator: ATI Mobility Radeon HD 3470 
    Problem/Issue:
    Driver problem appeard after upgrading from XP to Windows 7.
    From the Device Manager I saw that ATI Mobility Radeon HD 3470 was not working properly and
    a) I did the "update driver software." After restart the screen light was darker than usual. (This was usual if I was working from battery but I was plugged in this time. ) 
    As I'm not the best with computers I thought my drivers might be in conflict and to prevent serious damages, I just
    b) disabled ATI Mobility Radeon HD 3470 from device manager. 
    This actually resolved the dark screen problem.
    c) then I went to Lenovo support site: http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-72858
    downloaded newest drivers for ATI Mobility Radeon HD 3400 (Switchable Graphics Driver)
    and Intel 4500MHD (Intel GM45 Express Chip)
    For some reason while installine the: Intel GM45 Display Driver (version 8.15.10.2302) gives me error:
    "This Computer Does not meet the minimum requirements for installing the software"
    Also some problem appeard when installing the new downloaded version:
    ThinkPad Switchable Graphics Driver  (version 8.792.5-110424b-119200C)
    d) so I went back to device manager and made an update to ATI Mobility Radeon  from there. 
    Well, I got it working, but the screen went dark again. When I disable the driver it goes back to normal
    brightness and when I enable it again, it stays normal.
    I'll try to restart and see what happens

    We had the excat same issue.
    I could get the picuture back pressing the power button until it went to sleep and then wake it up again.
    After the I went to device manager to delete all display drivers both Intel and ATI and then reboot.
    doing the reboot windows found some drivers it could use.
    I then installed the switchable driver from lenovo.
    Now windows device manger report two display drivers:
    1)
    ATI Mobility Radeon HD 3400 Series, Version 8.792.5.2000, Driver manufacturer ATI Technologies Inc
    2)
    Mobile Intel(R) 4 Series Express Chipset Family, Version, Version 8.792.5.2000, Driver manufacturer ATI Technologies Inc
    So it seams the switchable ATI driver take over the Intel card and the Intel driver is not needed.
    At least the problem is solved for us.
    Regards Anders

  • I was trying to sync my 120GB iPod Classic earlier and it said it couldn't sync as the iPod disk could not be "read" or "written to". I now can't get anything onto my iPod, and I was wondering if it is a hard drive problem? Any help appreciated. Thanks.

    I was trying to sync my 120GB iPod Classic earlier, and it said it couldn't sync as the iPod disk could not be "read" or "written to." I now can't get anything onto my iPod, and I was wondering if it is a hard drive problem? Any help appreciated. Thanks.

    Did you go into iTunes to change the location of your media files? if not you will need to go into iTunes and click on preference and select the advance tab then click the iTunes Media folder location.  Select the location of your on external hard drive. 

  • Windows 7 - HP Laserjet 8500 print driver problem

    I have tried everything imaginable to correct this HP 8500n print driver problem with no success, please help!
    I cannot correct or get rid of a reoccurring “Incompatible Print Settings” error dialog box message that repeatedly states that “There are one or more conflicting settings. One of the settings is: Output Bin: Mailbox 1, Accessory Output Bin: Not Installed”. The radio button options are “Restore my previous settings or Keep this setting, and I will change it later”. This same dialog message repeats 13 times for all the other various conflicts each time you click on printer properties to change to 2 sided printing or any other printer settings. This printer does not have any of these features attached or set into it.
    I am a volunteer that manages a number of computers on our small church LAN, 2 computers operating on MS XP-SP3, 2 on MS Windows 7 Home Premium and my 2 problem computers that came pre-installed with Vista Home Premium of which I have performed an HP OEM upgrade to Window 7.
    I have isolated this print driver problem to the Vista operating system and even when computers are upgraded to Windows 7 does not correct this driver error. I have also tried every possible print driver variant of the HP 8500, HP8550, PCL, PS to include the Microsoft versus HP versions with no success. In each case I get this error yet neither of the XP computers or the computers that had Windows 7 as a original operating system have no problems with their print drivers for this printer.
    Yes, I have repeatedly searched and upgraded the operating system and print drivers. In desperation I have even tried to find the correctly behaving Windows 7 print driver and transfer it to these Vista upgraded to Windows 7 machines. However I could not isolate the driver location.
    The only thing I can conclude is that this errant HP print driver was resident within Vista and remains resident even after a HP OEM Windows 7 upgrade. Additionally, all of these computers are configured to access this printer via its static IP address on the network.  The XP computers are 32 bit, all of the Vista upgraded to Win 7 and OEM Win 7 computers are 64 bit machines all with respective OS. 
    Can anyone please help me correct this problem?

    Hi, 
    Unfortunately I can't see your uploaded image yet as it is awaiting approval from HP.
    From what I can see you are correct that HP does supply drivers for this printer and that the drivers for your printer are already included with Windows 7.  On the machines affected, try the procedure below to see if it helps at all
    Next download revo uninstaller on the link below and install it.
    http://www.revouninstaller.com/download-freeware-version.php
    Disconnect the printer from the PC.
    Run Revo and see if it finds any  HP Printer Software installed.  If it does, right click the software icon and select uninstall.  During the process you may be asked to delete registry entries.  If you are, just select all and click delete.  Do the same for any left over files and folders.  Once completed, reboot the PC.
    Re-connect your printer to the PC and follow the guide below.
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536257
    If this helps you will need to repeat the process on each of the affected machines.
    Best wishes,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HP Color LaserJet 5550 and Tiger (10.4.11) Driver Problem

    I have recently acquired a Color LaserJet 5550hdn. I have updated all drivers and firmware available from the HP Website (Printer Driver, 5550 firmware and Jetdirect 610n firmware). The printer has been factory reset/cold reset etc. to purge any previous custom settings. I am using a PowerMac G4 Quicksilver (933mhz) and Mac OS X Tiger (10.4.11). I have made some test prints from both Preview and iPhoto and all have been dark and muddy with respect to colors. I have printed the same images from my wife's PC with HP's PCL 6 Driver for Windows XP and achieve satisfactory results with respect to color (that is to say, without fooling with any color settings in the driver, the image is at least within 10% of the color gamut compared to the screen image). Setting up the printer with the HP Postscript Driver for XP yields similar results as the Mac, dark and muddy colors. So is this a problem with the HP Postscript Driver? Is this a Mac OS X Tiger problem? Do users have color problems with the printer running the Leopard driver? 
    I previously owned a HP Color LaserJet 8550 (utilizing the same HP Driver for Mac OS X that the 5550 uses) and had default images (no fooling with any color settings in the driver) that were acceptable, again within 10% or less of the screen image color gamut.
    I have also downloaded HP's ICC color profiles (CMYK and sRGB) and put them in library/printers/hp/profiles.
    With respect to the driver itself, there are two areas in the print dialogue box which seem to have a bearing on color. One is Colorsync and the other is Color Options. Colorsync has two choices ('Standard' and 'In Printer') and I chose 'In Printer' to I assume bypass any Colorsync Conversion. When 'Standard' is chosen the print summary shows the HP Color LaserJet CMYK profile being used. There seems to be no way of changing the default setting in the Colorsync Utility to HP Color LaserJet sRGB. Not sure if it matters as the output for both 'Standard' and 'In Printer' seem to yield the same results. The options under 'Color Options" in the driver under the 'Show Advanced Options' have choices (Basic, Text, Graphics, Photographs, Advanced) and I have played with these to some extent. Although they seem to have some effect on the image, the print is still dark and muddy with respect to colors.
    On a final note I have tried a 'GutenPrint' driver to see if it would yield different results.....there was not one for the 5550 so I used a driver for the Color LaserJet 5500......it would only print in grayscale....the resulting image did not look very promising even if it had printed in color.
    Insights on any of the above from the community here would be most helpful!
    Thanks,
    -Ray 

    This is an update to my own post above. I downloaded the Mac OS 9 driver (yes OS 9!, but the QuickSilver is Dual Boot) for the Color LaerJet 5550 and printed (no changes to any of the driver settings) the same image (photo) as I used in Mac OS X. The image was still dark but not as poor from Mac OS X 10.4.11 (Tiger). Although I prefer not to use color management, I used the Colorsync tab in the driver and chose to match to Colorsync with a generic sRGB output profile (no other settings were changed in the HP color options tab). The resulting image was +/- 5% within the color gamut of the screen image (yeah!!!) In Tiger the options under the Colorsync tab in the driver are 'Standard' or 'In Device' and regardless of the choice, the print result is the same, very dark and muted colors. There is no option for sRGB and if set to 'Standard' the print summary always shows a CMYK profile being utilized. Given that the HP Color LaserJet 5550 is an sRGB printer as per HP, perhaps that is a problem? I would assume the 'In Device' option would bypass Colorsync (since there seems to be no other way to turn it off) and use sRGB, but that does not seem to make a difference in the image being printed.
    My good success with an OS 9 driver leads me to believe I have a driver problem in Tiger. However, I have no problems with other printers (HP All in One, DesignJet Color Plotter and wide format Epson inkjet....all of which are older) with respect to poor color output. Given this is a current model in the HP line-up and I believe in service during Mac OS X Tiger, it seems hard to fathom other users do/did not experience a problem.
    Again, do Leopard users have a problem with color issues on this printer with default driver settings? Does anyone have driver settings/other insights they could share with respect to Tiger to at least get the print image somewaht close to the screen image? As it stands now, regardless of settings, the printed image is dark with muted colors.
    Thnaks to anyone who can respond, even if it is to say they have no problems in Leopard/Snow Leopard as I am upgrading to a new Mac soon.
    -Ray

  • Canon iR 2530 driver problem

    Hello at all...
    we have bought a new printer Canon iR 2530 but our IT-man can't get it installed.
    We have a Windows Small Business Server 2011 Standard 64bit operating system.
    He has tested several drivers here:
    imageRUNNER 2530
    The printer can be seen in the network and you can install at client. If you give a print order to the printer, the client says ok too. In printer spool the order is seen but it doesn't print.
    Our IT-man says this is definitely a driver problem.
    Can anybody of you here help us, please...

    Maybe this thread will help:
    https://discussions.apple.com/message/23873672#23873672

  • Hard drive problem with HP Pavillion dv7-4180us

    Hard drive problem with my HP Pavillion dv7-4180us. Using Windows 7.
    Boots up sometimes and very slow.
    Appreciate any help.

    Have you booted into the BIOS or Diagnostics Tool to run the Hard Drive Test?

Maybe you are looking for