TS1567 ipod wont turn on or recognize the computer

the ipod will not turn on or do anything not even recognize being plugged into a computer

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar       

Similar Messages

  • Ipod wont turn on /show up my computer

    hey there
    my ipod wont turn on. it sounds as if its firing up, then fails and displays the sad i pod icon. I've tried restoring factory settings etc but because my computer wont recognise it this can be done
    if anyone could help me out i;d be very grateful
    Thanks

    The Sad iPods icon or folder with an exclamation mark are the toughest problems to deal with, and must do a Restore in order to fix it. However, when your iPod is showing this icon, it is probably too late for your computer to recognize the iPod.
    1. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    2. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    Still can't see your iPod?
    Several things could keep iPod from appearing in iTunes or in the Desktop/Finder when you connect it to your PC/Mac. The most likely causes are listed below in logical order. Check from the top of the list to see if that is what's keeping iPod from appearing.
    3. Try to wait 30 minutes while iPod is charging.
    4. Try another known-good FireWire or USB through Dock Connector cable.
    5. Try another known-good FireWire or USB port on your computer .
    6. Try to disconnect all devices from your computer's FireWire and USB ports.
    7. Windows users having trouble with their iPods should locate a Mac user. We've found that in many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    8. Try to do an Erase (Disk Utility) on a Mac computer or a format with a PC (Disk Management tool) but ensure you choose the right Drive (your iPod not your Hard Disk of your computer). You may need to plug and unplug your iPod with the computer for several attempts, and switching around Format and Restore, and hope out of sudden, it will get recognized.
    9. Diagnostic mode solution – which I copied from a thread of a post from thinktwice
    “Then I cam across this special Diganostics Mode that you can get to by resetting and then while the Apple is showing pressing the Select and backwards keys simultaneously. It bring up and weird Diagnostic utility witha a abunch of tests. Here is what I did
    - I tried the 5in1 test and got and error on Firewire.
    - I did the HDD R/W and surprisingly it passed.
    - I went on to the HDD scan. This supposedly tkaes acouple of minute so I waited. I think 4-5 dots appeared then nothing. The iPod started to get hot. THe disk was spinning away. After a while the battery got very low. THis test chews up the battery. So I escaped out by resetting and went to connect it to a power source.
    My USB was dangling out of my computer and I was too lazy to get the Firewire AC adapter thing going so I connected expecting the whole lockup thing with iTunes. Surprise. IT was recognized immediately and has been working like a champ. So go figure.
    Details on Diag mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/index.shtml
    10.Let me ask you a question, if an iPod with no iPod software with it. When your connect it with a computer, what would happen?
    Yeah, the computer will treat it as a fresh external hard disk, which will get force mounted, the computer will ask you to format the iPod. It does not really matter the format is completed or not, the key is to erase (or partly) the corrupted iPod software on the iPod, after that the computer will recognize it.
    Once it has been completed, eject your iPod, open the iPod updater and interestingly, you will able to do the Restore this time.
    Base on the above, that's why I suggest Windows users who experience trouble with their iPods should locate a Mac machine or vice versa. PC computer will not recognize a Mac formatted iPod, but it will get mounted in an attempt to format your iPod.
    But, if none of these steps address the issue, your iPod may need to be repaired. You can arrange for service at the iPod Service Website.
    I have just read an interesting solution about the Sad iPod, it does make sense but the warranty will be waived once you open the iPod, I would not do it myself as I am not good on doing this
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Pictures and instructions of how to open the iPod case for battery replacement
    http://www.kokopellimusic.us/KM_instructions.htm

  • Ipod wont turn on or connect to computer after reset while restoreing

    so i was restoreing my ipod and i realized there was some pics i wanted so i disconnected the ipod and then reset doing the thing where u hold select and menu and now it wont turn on or connect to the computer please help me out

    bump

  • Ipod doesnt recognise its connected to the computer, it wont turn on!!

    My ipod doesnt recognise its connected to the computer, and it wont turn on, it does nothing! ive tried using other usb cables but it makes no difference. help please!

    Try with the iPod in forced disk mode.
    Putting iPod into disk mode.
    Still no joy, see these.
    iTunes 7 doesn't recognize the iPod.
    Your Windows PC doesn't recognize iPod.
    iPod appears in Windows Explorer but does not appear in iTunes.
    iPod does not appear in iTunes.
    Fast user switching in Windows XP is not supported.
    Is the battery charged fully?

  • I have an ipod touch 4g 32gb, and it wont turn on... the uncharged logo eeps showing up in my screen...what can i do?

    i have an ipod touch 4g 32gb, and it wont turn on... the uncharged logo eeps showing up in my screen...what can i do?
    i have left it charging for 3 days, and it wont turn on!
    help please!

    Here:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    An appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • My ipod touch 5th gen. 16gb ios 8.1.2 wont turn on, i press the power button and nothing happens, and my home button doesnt work, PLEASE HELP ME OUT!!!

    My ipod touch 5th gen. 16gb ios 8.1.2 wont turn on, i press the power button and nothing happens, and my home button doesnt work, PLEASE HELP ME OUT!!!

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Ipod wont turn on all i see is the apple sign then my ipod shuts off again, how to fix it?

    ipod wont turn on all i see is the apple sign then my ipod shuts off again, how to fix it?

    Connect it to itunes, and see if itunes recoginizes it.
    If not, then hold home and the power button to do a soft reset.
    If not, then you will need to go into recovery mode.
    To get into recovery mode you need to Hold Power + Home at the same time. After it goes blank, continue holding the home button while releasing your finger from the Power Button.
    You should be able to do it. Otherwise, you may need to send your Ipod in for repair.
    NOTE - Using recovery on your Ipod will erase all data and reset all settings.

  • My ipod wont turn on i already read about holding the power button and the home button the only thing is my home button is not working so what can i do

    my ipod wont turn on, its a ipod 5th gen- I turned off my ipod and then when I went to check it later it wont turn on this is the second time it happened, I tried to charge it its not recognizing it, I have heard that you can try to press the power button and the homebutton to make it work, when it happened the first time I did that and it worked but since my home button isn't working what can I do, can I try to fix it or do I have to go to apple and ask, can anyone help me plz

    Hello, pravin729.  
    Thank you for visiting Apple Support Communities.  
    I understand that your iPod touch will not turn on.  I would start with going through the troubleshooting steps in the article below.    
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on
    http://support.apple.com/en-us/HT201412
    Cheers,
    Jason H.

  • My ipod wont turn on and only flashes the apple logo what do i ?

    not too sure what going on, my ipod wont turn on and when looking at the screen all u see is the apple logo flashing from time too time. i tried resetting it but that didand if so how? nothing. do i now have to do a factory reset

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Ipod wont turn off in the dock

    i have an ipod connected to the apple universal dock. the ipod wont turn off after it has been charged, the screen shows that it is fully charged. how do i turn it off without removing it from the dock? i have both my ipod dock and the tv connected to the same set of speakers...the tv sound ouput is very low if the ipod doesnt turn off since both of them share the same speakers....if i remove the power to the dock, the speaker again outputs full volume from the tv. any ideas?
    ipod 5th gen    

    I just bought an 60gig Ipod photo and it won't turn off.
    I was going to post my own topic put someone mentioned it already. It won't do anything its frozen. is it broken?
    LmB

  • My ipod wont turn on. i thought it was just dead, but i left it in the charger for about 4 hours and it still wont turn on. what should i do?

    my ipod wont turn on. i thought it was dead, but i tried putting it in the charger and i let it charge for 4 hours and it still wont turn on. i tried multiple chargers and also tried plugging it in 2 different computers. what should i do?

    That symptom is coverd here:
    iPod touch: Hardware troubleshooting

  • My ipod wont turn on and the comp. is no recognizeing it!

    ok my ipod wont turn on and i tried resetting it but it wont work and the computer is no recognizeing it the little window that pops up says that the thing in the usb has a malfunction!!

    You have a hardware problem and you should take it into a apple store to be looked at and fixed.

  • My daughters iPod wont turn off and has a blank white screen. i tried to restore it to the original state and it is still the same. is this fixable? thank you for your help

    My daughters iPod wont turn off and has a blank white screen. i tried to restore it to the original state and it is still the same. is this fixable? thank you for your help

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

  • My screen wont turn on for my ipod touch. it's recognized by the computer when i plug it in and it beeps when i plug it in the wall. whats going on?

    help. this screen wont turn on. its not the battery its fully charged.

    Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears)
    Try a different cable.
    Use a wall plug.

  • What do i do if my Ipod wont turn on? I was using it and it just turned off. My computer wont recongize it and it won't charge. It was perfectly charged before.

    what do i do if my Ipod wont turn on? i was using it and it turned off. My computer wont recognize it. It was perfectly charged before and I can't turn it on.

    Try holding down the on/off and the home buttons at the same time until you see the Apple logo. 

Maybe you are looking for

  • IPod not showing up on computer or in iTunes

    My iPod mini (It's the older version of iPod mini in the darker colors) recently stopped showing up on my iMac and iTunes. It charges, but since it doesn't show up, I can't add music or anything. I already looked at the support page Apple has for thi

  • How to display data in Table control?

    Hi Experts, Can anyone please explain me how to display the data from two different tables(those two table is related with 1 field) into a single table control? For Example: T1 has fields (F1,F2) and                      T2 has fields (F3,F4) --> her

  • PAT file

    Hello, Please I need some help related to PAT files. I have one PAT file number RMZ0020123456_0000045.PAT This PAT file was not created by me. Now I want to see what transports were included in this PAT file. Please can you help me in getting this in

  • External displays shifted

    I am running multiple external displays at 1920x1080 and the image is shifted coming out of the thunderbolt ports on my imac.  Using a 2 mini display to VGA have also tried a mini display to DVI and they all send a shifted image.  Tv's that can shift

  • How to minimize a window and open another app

    How to minimize window and open another app