TS1567 its denied, it says that "windows could not start the apple mobile service on Local Computer"?
its denied, it says that "windows could not start the apple mobile service on Local Computer"? What do I have to do?
http://support.apple.com/kb/TS1567
Similar Messages
-
Using Windows 8.1 Pro on Toshiba Satellite i7 Laptop with 8Gb Ram
After upgrade from Windows 8 Pro to 8.1 Pro, the Offline Files/CSC service refuses to start and gives the error message:
"Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"
Before the upgrade, offline files worked fine... how do I re-enable offline files?I had a similar issue - couldn't make any files available offline.
I found that the offline folder service would not start
This was because the CSC permission were totally screwed. I had to take ownership of each folder and file, one by one, then grant everyone full access.
then delete the full contents of the CSC folder
format the CSC database using the registry fix then reboot
in control panel, disable the offline files, reboot, then re-enable. and now its working :)
2hrs to resolve this, with grateful thanks to this thread and some others.
damn windows8 -
Windows could not start the DHCP Client service on Local Computer, Error 2
Hi everyone,
I assign IP addresses via my router but today installed OpenVPN and it depends on the DHCP Client service. I checked in services and found it wasn't running. If I try starting it I get this message "Windows could not start the DHCP Client
service on Local Computer." "Error 2: The system cannot find the file specified.".
There's plenty of info out there about this issue but nothing seems to fix it for me. I've tried the following as an administrator,
"sfc /scannow" - It reported and error which it fixed but after a restart the problem persists.
"NET LOCALGROUP administrators "NT Authority\Local Service" /add"
"netsh winsock reset catalog"
I also checked that all dependencies of the DHCP Client service are working. I used "CMD /K
SC QC DHCP" to check the dependencies and compared them to an identical computer and they are. Hope someone can help. Thanks in advance.Hi,
Did you mean after the restart the sfc /scannow command still could find the corrupted files?
Have you check this these related registry entries permission for your account?
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dhcp
permission needed: Query value, Create value, Enumerate Subkeys, Notify, Read Control
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dhcp\Configurations
permission needed: Full Control, Read
for more information, read this article:
Some services do not start in Windows Vista and Windows 7
https://support.microsoft.com/kb/943996?wa=wsignin1.0
If the issue still cannot be resolved, I would like to suggest you use the recovery media to repair your computer.
Karen Hu
TechNet Community Support -
Could not start the oracle orcl service on local computer 1053
I ve oracle 8i with Windows XP ,when I try to start it manually also it show ing the 1053 could not start the oracle orcl service on local computer 1053 what should i do?
Thanks
[email protected]go to oarcle service
click the service
choose logon
click the boutton
local system. now try start service -
HT1926 Windows could not start the Apple Mobile Device service on iTunes install
Trying to install the latest update to iTunes on Wind 7 x64 box... Died during installation with error "Service 'Apple Mobile Device' failed to start... havee uninstalled itunes and am running a fresh install as Administrator... Get the same message...
Tried to start the Mobile Device service from computer>manage>services but recieve the error 'Windows could not start the AppleMobile... Error 1053 The service did not respond to the start or conrol request in a timely fashion..
Any ideas??? thanks.............Hello thezerfi,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
Close iTunes and disconnect the iPhone, iPad, or iPod touch.
Click the Windows Start button .
In the Start Search field type Services.
In the Programs section of the search results, Click "Services".
Select Apple Mobile Device and click Stop the service as shown below:
After the service has stopped, click Start the service.
After the Apple Mobile Device service has started again, open iTunes and connect the device.
Best of luck,
Mario -
Could not start the Oracle Agent service on local computer
I have Oracle Enterprise 9.2.0.1 on Windows 2000 server,
When I'm starting the Agent service I get this message:
"Could not start the OracleOra9201Agent service on local computer.
The service didn't return an error.This could be an internal Windows error or an internal service error. If the problem persists, contact your system administrator."
Could you please help me to fix this problem? What I should do??Are you using DHCP or using static IP address?
Also search forum , you ight get lots of thread addressing same issue. -
Today I installed Adobe Director 11.5. I received a couple of errors in the FLEXnet Licensing Service. It looks It could not start. I tried to download the Licence fix what I found on Google but that doesn't work, so I checked the 'Service' at service (windows).
It's status is empty. When I double click on the FLEXnet Licensing Service, clicked on start at the opened window and an error is coming:
Windows could not start the FLEXnet Licensing Service service on Local Computer
Error 1068: The dependency service or group failed to start.
I don't understand what it says with this message, only that it is impossible to start. However, that is not what I am trying of course, I want to start the FLEXnet Licensing Service, service.
Re-installing of the software, doesn't make any change. How can I start it so Director is also working?Hi Don1233,
Please consider seek help at the software vendor side.
For the services didn't start, follow the suggestions posted by Elton in the thread below:
https://social.technet.microsoft.com/Forums/en-US/e35da253-f0df-41d1-8df2-b73fa54742a0/windows-could-not-start-the-flexnet-licensing-service-service-on-local-computer-error-1068-the?forum=w7itproinstall
Best regards
Michael Shao
TechNet Community Support -
Could not start the apple mobile device
how do I fix this problem with my Ipod touch. I try to start the apple moblie device then it comes up with. Could not start the Apple Moblie Device Service on local computer Error 109 the pip has been ended
You haven't given anyone any clues about your computer or OS, but if you search this forum for "apple mobile device" you will find some suggestions.
-
Error 5: Access Denied can not start the DHCP Client service on Local Computer.
Ran into this error problem with both the DHCP and BFE service. Neither will start and both give me the same error code 5 access denied.
Found this little nugget below:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dhcp
Right click and choose Permissions. There should be the following:
System = Full Control
Local Service = Read
Network Service = Read
Local Admin = Full Control
Local Users = Read
Dhcp = Read with special permissions
No problem adding the missing Local Service and Network Service. How does one add Dhcp? Is there a way to create this because under permissions there is no way to add this or search it up. Is there a NetSH reset command that will add this in for me?
The Netlogon service was not running and to get the Netlogon service going I ran NetSH int ip reset and it started to work. The other services were not running either and I was hoping they would after resetting IP
Any ideas on to fix this problem? Also, the user turned off the laptop when it was doing updates. Still I do not think it would have created this headache.
TIA
Spammer HammerHi,
Was your issue resolved?
If no, please reply and tell us the current situation in order to provide further help.
Karen Hu
TechNet Community Support -
Windows could not start the Network Location Awareness service on Local computer
i have a dell inspiron 1501 laptop running windows vista home premium media center edition. i have recently been getting an error when trying to view networked computer saying "connection status: unknown" and "the dependency service or group failed to start". i started by disabling and re-enabling the driver and that did not help. i then brought up the services.msc thing and started looking at the networking services. i noticed that the Network Location Awareness service was not started so i tried to start it. i got a popup message saying "Windows could not start the Netwrok Location Awareness service on Local Computer. Error 0xc000096: 0xc0000096".
i also get an error popup when i try to start the Network List service saying "Windows could not start the Network List Service service on Local Computer. Error 1068: The dependency service or group failed to start".
what might i have done to make this happen and what can i do to try to fix it?
hausHi,
Thank you for the post.
I fully understand the inconvenience the issue has been caused and the current situation can be frustrating. Please try the following steps for troubleshooting.
1. Please start the computer in Safe Mode with Network and check the result. If the issue disappears, please perform a clean boot.
For the detailed steps, please refer to the step 1 and 2 in the KB article 936214 (http://support.microsoft.com/kb/936214).
2. If the issue persists, please check the system file by using the command SFC /scannow.
For more information, please refer to the KB article 929833 (http://support.microsoft.com/kb/929833).
If the above suggestions do not resolve the issue that service fails to start up, please understand that debug and dump analysis may be required for further troubleshooting. Also, in most cases, it is necessary to check the source codes. However, debugging is out of our forum’s support boundary. A support call to our product service team is needed for the debugging service. In this case, I’d like to suggest contacting Microsoft Customer Support Service (CSS) for assistance so that this issue can be resolved efficiently.
To obtain the phone numbers for specific technology request, please check the website listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS
Thank you for your understanding.
Sincerely,
Joson Zhou
Microsoft Online Community Support -
Just recently, I had a problem with the AVFoundation thing on my computer. Well I got that fixed, but now it has a message coming up that says " Windows could not start the Bonjour Service service on local computer. Error 3: The system could not find the path specified.
Please tell me how to fix it.Windows could not start the Bonjour Service service on local computer. Error 3: The system could not find the path specified.
That's an unfamiliar one, steve.
Let's see what happens if we try to start the service manually.
In your Start menu, right-click Computer and select "Manage".
Expand "Services & Applications"
Open "Services". (Perhaps maximise the Window to better see what's going on.)
Select the Bonjour Service and click "Start".
Do you get an error message then? If so, what does that one say? -
i cant update my iphone and i tried going on my pc on itunes and clicking check for update button but it says that "itunes could not contact the iphone software update server because you are not connected to the internet". But i checked my internet on both my pc and iphone and tried again but it still says the same thing. plzz plzz help
Were you definitely connected to the internet at the time? If you don't have iOS 5 on your iPhone then the only way to update it would be via iTunes, once updated to the latest version of iOS you'll be able to update your iPhone without connecting to iTunes "over-the-air".
Before updating however it goes without saying to Backup your iPhone, this should happen by default upon connecting your iPhone to iTunes.
Regards,
Steve -
Windows could not start the Server service on local computer Error 193:0xc1
Hello,
Not able to start Server (lanmanServer) Service in Windows Server 2008 R2
Its a VM and on logging into the Server it sometimes shows as started and then will stop by itself,
If we try to start manually it always gives the error --Windows could not start the Server service on local computer Error 193:0xc1
All dependent services are fine and running ,did sfc,did copy svchost and svcsrv.dll files from a working Server of same.but no help,no shares of this server are accessible since this service is not running
on checking the event log its shows an error "Server is not a valid win32 application"
Please help
Thanks and Regards
JoseHi,
Thanks for posting your question in the forum.
I noticed that you have created the same question in another thread. Please understand that we should focus on only one thread for the same question at the same time, please focus on the thread
below you created in the forum. Thanks for your understanding.
http://social.technet.microsoft.com/Forums/en-US/5ba43477-9626-4fdf-872a-d3ecd12835c5/windows-could-not-start-the-server-service-on-local-computer-error-1930xc1?forum=winserverNIS
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support -
Windows could not start the distributed transaction coordinator service on local computer
Dear All,
I'm having an issue starting the DTC service in windows 7 OS. I always got the error message below when im trying to start it.
"Windows could not start the distributed transaction coordinator service on local computer"
Thanks,
MelvinHi Melvin,
Please try the following methods to solve this issue:
Method 1: Re-create the MS DTC log, and then restart the service.
Click
Start, type cmd in the search box, and then press
Enter.
Type the command
msdtc -resetlog at the command prompt, and then press
Enter.
Warning: The msdtc -resetlog command can cause data corruption if it is used incorrectly. Make sure that you do not have any pending transactions when you run this
command.
Type the command net start msdtc, and then press
Enter.
Method 2: Set the logon account permissions for the MS DTC service
If Method 1 does not resolve the problem, set the logon account for the MS DTC service to have read and write permissions for the Msdtc.log file. Please follow the steps below:
Click
Start, type cmd in the search box, and then press
Enter.
Type the command
control admintools at the command prompt, and then press
Enter.
Double-click
Services.
In the Services pane, locate
Distributed Transaction Coordinator.
In the
Log On As column, note the account name. Note: The default logon account for the MS DTC service is the NETWORK SERVICE account.
Start Windows Explorer, and
then open the %windir%\System32\Msdtc folder.
Right-click the
Msdtc.log file, and then click Properties.
Click the
Security tab.
Click the logon account name that you noted
in step 5. For example, click the NETWORK SERVICE account name.
In the
Permissions pane, click to select the Allow check box for the following permissions: ◦Read & Execute
◦Read ◦Write
Click
OK.
Click
Yes to accept the security warning.
In the
Services pane, right-click Distributed Transaction Coordinator, and then click
Start.
Method 3: Assign permissions to the NETWORK service to traverse the directory tree
Determine whether the NETWORK service has permissions to traverse through the folder. To do this, follow these steps.
Note: By default, the "Everyone" group has these permissions. For more information, go to the following Microsoft TechNet website:
Bypass traverse checking
Click
Start, type secpol.msc in the search box, and then press
Enter.
Browse through the following computer configuration:
\Windows Settings\Security Settings\Local Policies\User Rights Assignment
Check for "Bypass traverse checking," and then add the "Everyone" group.
Update the Group Policy settings on the computer. To do this, click
Start, type gpupdate in the search box, and then press
Enter.
In the
Services pane, right-click Distributed Transaction Coordinator, and then click
Start.
Regards,
Lany Zhang -
Dear Technet,
Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.
My cluster suddenly went disappear. and tried to restart the cluster service. When trying to restart service this above mention error comes up.
even i tried to remove the cluster through power-shell still couldn't happen because of cluster service not running.
Help me please.. thank you.
Regards
ShamilHi,
Could you confirm which account when you start the cluster service? The Cluster service is a service that requires a domain user account.
The server cluster Setup program changes the local security policy for this account by granting a set of user rights to the account. Additionally, this account is made a member
of the local Administrators group.
If one or more of these user rights are missing, the Cluster service may stop immediately during startup or later, depending on when the Cluster service requires the particular
user right.
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Maybe you are looking for
-
On my old Macbook whenever I would sync my iphone, if I had changed something on the calendar it gives me the option to choose between the computer event or the iphone event (so lets say I'm out and I changed the time of my appointment on my phone, w
-
Sip 503 service unavailable and sip 500 internal server error
Hi guys,could any one help me in the following. ITSP-->Voice gateway configured as CUBE-->CUCM-->UCCX I am moving a system from cme and aa enviroment to cucm and uccx The VGW is configured as CUBE and also is added as h323 gateway on cucm. When i tes
-
Mp495 is printing document with double or shadow letter
My canon mp495 is printing my documents with a shadow/double letters I aligned it and cleaned the roller, bottom plates,& deep cleaned the nozzle and still have same result please help
-
Recipient type field mandetory in vendor master
Hi All, Our FI team is setting Recipient type field in the with holding Tax as u201Cas requiredu201D. This will be as per vendor account group. Can anybody suggest me what will happens if he makes this changes? There will be any impact on purchasin
-
I accidentally deleted the iPhoto app?
I was trying to get my iphoto library onto an external drive i think its called? and then i thought i did it so i moved iphoto into the trash and emptied it and now iphoto is gone and in the app store it says its instaled and i cant find it anywhere