TS1587 Hello, I downloaded an ntfs systemfile from tuxera and used it to convert a usb stick, my imac froze a while after so I turned it off the on and now I have blue vertical lines on boot up and the a white screen with lots of tine blue symbols, need h

Hello, I downloaded an ntfs systemfile from tuxera and used it to convert a usb stick so I could put more than the fat32 4gb on, my Imac froze a while after so I turned it off the on and now I have blue vertical lines on boot up and the a white screen with lots of tine blue symbols after, mouse pointer moves but thats about it.
Have used R and cmd to get a menu up but once I choose one of the four options my mouse is rendered useless and I cant get any further, have downloaded, to another usb stick recovery disk assisstant and am trying to use that in conjunction with the lion option on the previously mentioned screen, computer was responding really slowly and has now frozen on the terms of software license agreement (maybe the last hurdle!) can anyone pleeeeeease help!!!!!??????

It's likely that the boot drive is failing, or that there's some other hardware fault. Run the Apple Hardware Test.
Intel-based Macs: Using Apple Hardware Test
Even if the test is negative, you should make a "Genius" appointment at an Apple Store to have the machine tested more thoroughly.

Similar Messages

  • I have coloured vertical lines about a quarter of the way from the left of the picture when using my apple tv 2. Anyone got any idea what is causing it. Have done a reset but still same. ATV2 is only a month old.

    I have coloured vertical lines about a quarter of the way from the left of the picture when using my apple tv 2. Anyone got any idea what is causing it. Have done a reset but still same. ATV2 is only a month old.

    Just to make sure, try a different set of cables. If the problem persists, have the unit replaced by Apple.

  • Where i click some thing on facebook a window pops up before i could right click the link in the window but now its got a dot line box around it and i cant help

    when i click some thing on facebook a window pops up
    before i could right click the link in the window
    but now its got a dot line box around it and i cant help

    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    Use a compressed image type like PNG or JPG to save the screenshot.
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • My mac won't boot up, just has a white screen with a blinking ? mark, any suggestions?

    my mac won't boot up, just has a white screen with a blinking ? mark, any suggestions?

    this usually means the software and hardware can't find each other for whatever reason the following article addresses this issue:
    http://support.apple.com/kb/TS1440
    can also do apple hardware test, following article on that:
    http://support.apple.com/kb/HT1509
    if you can't access the apple hardware test in the above article you can also do fsck command to check the hardware as well, following article tells how to do that:
    http://support.apple.com/kb/HT1782
    hopefully one of these articles helps w/ resolution!!

  • Image from a camera using a video converter to USB

    I tring to capture in my LabView app the alive image of a camera that is transmitted to a Tv tuner. I´m using a video  converter to USB (PC) I don´t need to process the image I just want to see the image of the camera alive.
    When I use a Microsoft LifeCam (usb) conected directely to the usb port I can see the image in my app.
    When I use Windows Movie Maker to see the image of my remote camera I can see the image alive.
    But, when I use my app with the remote camera it doesn´t work. I can´t see the image.
    My app is is attached bellow. As you can see I´m usig Imaqdx and LabView Fall 2011.
    Someone could help me?
    Thanks in a advance.
    Celia
    Attachments:
    CamTuner.vi ‏43 KB

    Dear Christian,
    I don´t know if my device is directshow compatible. May be not, because I tried to see the image using NI Measurement & Automation and I couldn't, besides the device appears in NI-Imaq devices list.
    But before this Labview app I made the one that is attached, using labview 8.6 and Imaq for USB. It woked right but because of the property page object every time the app ran a window was open and no matter was checked ok or cancel it worked in the same way. I thought using Imaqdx objects I didn't have this undesirable window. Do you know why it worked using Imaq for USB objects and it didn't using Imaqdx objects?
    Thanks in advance.
    Celia
    Attachments:
    CamImaqUSB.vi ‏43 KB

  • After upgrading to the most recent version of iTunes, for the second time now, I have completely lost all of my playlists and some of my music

    I have upgraded to the current version of iTunes 12.0.1.26
    I am using Windows 7 Premium
    I have lost all of my previous playlists and some of my music
    This is the second time this has happened when advised of an updated version.
    How can I get all my music and playlists back without having to redo them again?

    Hello richmondhill49,
    The article linked below details a number of steps that may help restore your content and playlists to iTunes.
    No content shows up in iTunes after updating
    http://support.apple.com/kb/TS1967
    Cheers,
    Allen

  • Hi there i have ipod touch 2nd gen and i am tryna restore it but i get error 21 with orginal fireware and 1601 with custom fireware and when it connected to itunes and i try to boot it up by restoring it white screen with lines thorugh it

    hi there i ahve ipod touch 2nd gen and i am tryna restore it but get error 21 with orginal fireware and 1601 with custom firewarw and when connected it to itunes and i try to boot it by resotring it white screen with lines through it

    Those errors are covered here:
    http://support.apple.com/kb/TS3694

  • IMac 21.5" boots to white screen with vertical blue lines/bars then locks up

    iMac 21.5" (mid 2010) Intel Core i3 4GB RAM with Radeon HD 4670 boots to white screen with vertical blue lines/bars:
    Then it locks up after a few minutes, at which point the screen changes to white with these blue symbol things all over the screen:
    If boot to Safe Mode, it still has the white screen with blue lines/bars, but eventually loads the login screen and I can successfully login and get to the desktop, but even that has the bars/lines.
    Eventually, after enough restarts or hard shutdowns it will boot normally with no video/display issues. I've run disk checks, did the SMC and PRAM resets, checked logs (that I know of), and have even taken it completely apart, cleaned it out, reseated everything, put it all back together, but no change. I've read a few other posts about similar issues (but not quite the same video issue as this) where people had the logic boars replaced or reinstalled OSX, but that didn't always fix it. Any ideas? Has anyone seen this issue before? Thank you.

    crw4096 wrote:
    Is this a dead disk?
    Very well could be.
    If you can not startup from the Hardware Test, in Safe Mode or from > OS X Recovery  as discribed in the Support article's.
    Dig out the original Install Disc set that came with the iMac and do one of the following.
    1. Attempt to Repair the Hard Drive.
    Start from your Mac OS X Install disc: Insert the installation disc, then restart the computer while holding the C key.
    When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    Click the First Aid tab.
    Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    Select your Mac OS X volume.
    Click Repair. Disk Utility checks and repairs the disk.
    2. Run the Hardware Test from the second Install Disc.
        1. Insert Disc 2 and Startup holding the D key.
        2. Select the Extended Hardware Test.
    Then if you still can not get anything going, you need to contact your Local Apple Store or AASP and make a Service appointment.
    see > Apple - Find Locations

  • Strange Blue Vertical Lines All Over Anything that White on the Screen

    My screen always showed blue vertical lines on anything that is white on my Macbook Pro screen, but when I moved the screen back and forth a few times the blue lines just gone. It always happens when I took the Macbook Pro from a bag and waked it up and once and a while during normal usage. I took picture when the blue lines happen but I couldn't post it on the forum.
    I sent my Macbook Pro to local Apple Center but they couldn't find the problem. They has checked the screen connector for me but the problem still exist.
    Anyone, any idea what causing this?

    BJ_pkt
    Don't get me wrong and I don't think anyone like to have dead pixel, do you?
    I understand the LCD screen could come with dead pixel. I can live with a few dead pixels and I have no problem except any dead pixel from USAGE. With the new notebook or LCD screen I have a choice to check for the dead pixel and other false before I take any of them back home and if there any dead pixel happen after I am start using them I can accept it.
    The thing that difficult for me to accept is the replaced LCD came with the dead pixel (my previous screen didn't have any dead pixel) and I don't have any other choice but to accept it. I feel like I have been forced to accept it.
    My perception on Apple product quality still good. I will continue buy Apple product. But I disappoint in Apple service policy (not quality as I mention before, sorry) because I expect they would be better or different from others.
    ps. They changed my screen because they don't have a replacement only for screen cable so they replace the whole screen.

  • I inadvertantly dropped my iphone 3 and now have a white screen with green vertical lines to the right.  It won't sync with itunes due to an error. What can I do?

    I inadvertantly dropped my iphone 3 and now have a white screen with green vertical lines to the right of the screen.  It won't sync with itunes due to an error. What can I do?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    If it does not resolve the issue, the device is permanently damaged and will require replacement.

  • My hp pavilion dm-1 screen shows red,blue vertical line after switch it on

    after switching on boot menu comes ,then the screen turns into a red blue vertical line.what should i do?

    Hi,
    I've replied to the private message you sent me regarding this issue.
    Regards
    Visruth
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

  • What is that medium dark blue vertical line doing there?

    I went againt my grain and just hit the Return to Last Save in iWeb so now I have my old Welcome page but with no Counter. I adjusted the image a little bit, to improve the look, making sure that there were no blank white spaces at the top or the bottom of the scroll. All appears well. However:
    QUESTION: What is that dark blue vertical line on the right edge of and within/inside the window? Sometimes when I was manipulating/moving the pink flower picture, that blue line would blink into view and then blink out. Should I care that that line is there and not sitting on top of the window edge -- that it is inside/within the window edge?
    Lorna in Southern California

    It sounds like your object is centering with respect
    to another object on your page.
    Will
    Will, that seems odd to me, because all I have is that picture of the pink flower on that page. It is my Welcome page and there are is no nav bar at the top of the page because I deselected it in the Inspector thing.
    So if you tell me that the line is centring with respect to another object......
    then that is nettlesome because to my mind there is nothing else on the page except that picture which completely covers the page.
    Oh wait. There is a skinny rectangular box with text inside: "Welcome to Lorna's Page. Enter" Something like that; I can't remember now because I've changed it several times.
    Lorna in Southern California

  • Help please. T22, Thin blue vertical line on my screen????​??

    Hi, Can anyone help me , I have a thin blue vertical line on my thinkpad t22 screen, how can i remove it

    Take it in for service. You may need to replace the screen.

  • Smartwatch blue vertical line

    Has anyone else experienced a blue vertical line after powering up the sony smartwatch? Evereytime i power it on, a blue visible line appears. I have talked with customer support and opened a service request #.

    Unfortunately this is more likely a hardware issue with the display and as such I would advise returning it for assessment by an authorised repair agent.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Dropped my phone now blue vertical lines

    I dropped my iphone 4s and the screen is not cracked, but it only shows blue vertical lines. Help!

    First try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.  If that helps, great.
    But it probably will not and you should then go to the Apple store genius bar.  Be sure and make a backup first, in iCloud is best, so that you do not lose content if the decision is to replace the unit.  If you have an iCloud backup, that can be restored by the techs while you wait.

Maybe you are looking for