TS1591 Hi, i keep getting an error message when ever i try to restore my iphone 3g? how can i get pass this stage?

I am trying to update a ipone 3 however it is stuck in recovery mode and it keeps giving me an error message, please help

Error 1015: This error is caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred.
Either your phone is jailbroken or you are trying to install a version of iOS different than the current version for your phone. If it's jailbroken you will have to find a solution elsewhere on the Internet, as it cannot be discussed in an Apple hosted forum.

Similar Messages

I have an iphone 4s and i keep getting an error message when ever i try to activate i have already restored the phone and it still will not work. any help would be greatly appreciated

I have an iphone 4s and i keep getting an error message when ever i try to activate i have already restored the phone and it still will not work. any help would be greatly appreciated

Activation issues are almost always the result of a device that has been hacked or jailbroken. If that is the case, no support can be provided here.

I updated my itunes this morning, and now I keep getting an error message when trying to burn a disc. Any ideas how to resolve this?

I updated my itunes this morning, and now I keep getting an error message when trying to burn a disc. Any ideas how to resolve this?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Safari keeps dropping down this error message when ever i try to log on to any website safai can't verify the identity of the website ( e.g.. any address ) and the drop down has three choices to click on or else you can't go foward., they are check certif

Safari keeps dropping down this error message when ever i try to log on to any website safai can't verify the identity of the website ( e.g.. any address ) and the drop down has three choices to click on or else you can't go foward., they are check certificate ______ cancel ______ continue.... This thing is so annoying when trying to go somewhere i just want the error message to go away.

In your Keychain under 'login' delete the VeriSign certificates and then quit and restart all browsers/itunes/app store.
http://apple.stackexchange.com/questions/180570/invalid-certificate-after-securi ty-update-2015-004-in-mavericks

I'm getting the following error message when ever I try to start cs6 and the program gets close. "Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly."

Hi,
I’m getting the following error message when ever I try to start cs6 and the program gets close.
“Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available”
Please advise what is the problem? and How to sort this out?
OS Name
Microsoft Windows 8.1 Pro
Version
6.3.9600 Build 9600
Other OS Description
Not Available
OS Manufacturer
Microsoft Corporation
System Name
JARVIS
System Manufacturer
Dell Inc.
System Model
Inspiron N5110
System Type
x64-based PC
System SKU
To be filled by O.E.M.
Processor
Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date
Dell Inc. A11, 8/3/2012
SMBIOS Version
2.6
Embedded Controller Version
1.01
BIOS Mode
Legacy
BaseBoard Manufacturer
Dell Inc.
BaseBoard Model
Not Available
BaseBoard Name
Base Board
Platform Role
Mobile
Secure Boot State
Unsupported
PCR7 Configuration
Binding Not Possible
Windows Directory
C:\Windows
System Directory
C:\Windows\system32
Boot Device
\Device\HarddiskVolume2
Locale
United States
Hardware Abstraction Layer
Version = "6.3.9600.17196"
User Name
Jarvis\JARVIS\Abhishek
Time Zone
India Standard Time
Installed Physical Memory (RAM)
4.00 GB
Total Physical Memory
3.16 GB
Available Physical Memory
1.21 GB
Total Virtual Memory
3.72 GB
Available Virtual Memory
1.55 GB
Page File Space
576 MB
Page File
C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions
Yes
Hyper-V - Second Level Address Translation Extensions
Yes
Hyper-V - Virtualization Enabled in Firmware
Yes
Hyper-V - Data Execution Protection
Yes
Display adapters:
and NVIDIA GeForce GT 525M.

Without the actual crash logs nobody can say, but chances are that your graphics hardware is to blame, so update the driver...
Mylenium

I cannot download updates to Photoshop Elements 9. I get an error message that my serial number is not recognized or eligible. Can you help with this?

I cannot download updates to Photoshop Elements 9. I get an error message that my serial number is not recognized or eligible. Can you help with this?

Hi,
Which operating system are you running on?
What updates are you trying to download?
The last update was 9.0.3 - check by loading the editor and going to Help -> About Photoshop Elements
The last supported Camera raw is ACR 6.5 - check by loading the editor and going to Help -> About Plug-ins -> Camera Raw
Do you have a reason to update?
Brian

Hello, i'm trying to download the new verison of itunes, and im getting an error message: Apple mobile failed to start and c;runtime failed. how can i fix this issue

Hello, i'm trying to download the new verison of itunes, and im getting an error message: Apple mobile failed to start and c;runtime failed. how can i fix this issue

Hi Tatilopez86,
If you are having issues with iTunes after an attempted update, you may want to try the steps in the following articles:
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Apple Support: Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
- Brenden

I tried installing the new Itunes update and now I get the error message r6034 and now itunes is off my system? How do I get Itunes back?

I tried installing the new Itunes update and now I get the error message r6034 and now itunes is off my system? How do I get Itunes back?

i get a message saying error 7 (windows error 127)

I get the -1 error message when i have tried to restore my iphone, the phone will no longer work how can i rectify this?

I have tried to restore my iPhone but when it has gone through all the restore I get the -1 error message and now my phone will not work at all, how do I rectify this please.

Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.

When I tried to update ITunes I get an error message that MSVCR80.dll is missing from my computer. How can I fix this?

When I tried to update Itunes I get an error message that MSVCR80.dll is not available? How can I fix this? I am unable to update my iphone and Ipod. I can not open Itunes.

Click here and follow the instructions. If they don't work, perform a complete reinstallation (Windows XP, Windows Vista and newer).
(98954)

After closing out, FF will not restart, says it is already running forcing me to reboot. I have removed and re-installed FF and still get the same message when trying to open the internet using FF. How can this be fixed?

When I close out Firefox, and return later to use the internet, I click on Firefox and it gives me a message stating that Firefox is already running and needs to be closed before restarting or reboot my system. This occurs every time Firefox is closed and attempt to re-start it,,, not only at times,,,, EVERY time.
I have tried removing Firefox from my system and re-installing to fix this issue however,,, this did not work. After re-installing, I still get the same message when attempting to restart Firefox.
I have also tried Ctrl, Alt, delete to open the task manager and find there is no task to close.
I do not have any problems when using IE, I prefer to use Firefox as it is faster and crashes less than IE.
I am very frustrated at having to reboot my system each time I want to use the internet.
How can this problem be repaired?

There are various causes for this error, see [[Firefox is already running but is not responding]] for details.

HT5934 I keep getting an error message when trying to instal is7 in my iPad 2 . Can anyone pls help . I lost wifi for a white during the installation ...

Hello
Can anyone assist me with installing ios7 on my ipad2 please ?

laleh08 wrote:
Hello
Error message is "unable to install update " "an error occurred during installing IOS7 "'
Can you assst ?
Ooof... I hate those super-generic messages. If I were in your shoes, I'd start all over again with a new download. My WAG is that your first download was corrupted.

When I turned my Macbook on and signed in, it has been shutting down automatically and restarting itself immediately after opening the desktop. The error message said, I'd shut down my computer unexpectedly. How can I get it to stop shutting down on me?

Since downloading OS X Mavericks, my computer has been shutting down midway of starting up. Please help! The problem began after downloading the software free update. Now when I start my computer, it will starts up normal but when the desktop appears, there will be an error message that I shut down my computer because of an error and if I would like to open the applications that were open before the sudden shut down I should press continue. Then when I select continue, it will open up another communication window that my computer is restarting because of an error. Then the screen will revert to shutting down and restarting again. This has been going on now all morning. Can someone hlep me on how to resolve this issue?

Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode?

We randomly get the "specified Group is in use" error message when using the DIO Buffered Handshake In VI. How do we get rid of this?

We're using the DIO Buffered handshake in VI (PCI 6503 Board) to read TTL pulses from a wavemeter. Sometimes we are able to collect data, but sometimes we get this error message: "specified Group is in use". No matter how long we wait between taking data, we sometimes (yet not always) get this message. We have one group of 2 ports that we're reading. Is there a way we can get rid of this problem?

Hi,
Are you running any example program or your own?
1. This problem happens when you abnormally terminate the program, such as, by clicking on the abort button.
Say first time you run the programd and it runs fine and then abort the program. In that case, the DIO group is not cleared and hence the subsequent runs give the error that you said.
In such case I would suggest you to open the Device Reset.vi which is under Functions Pallete>>Data Acquisition>>Calibration and Configuration>>Device Reset.vi.
On the front panel of the Device Reset.vi, enter the device number of your card and run the Device Reset.vi. If you get an error on the front panel, then run again so the error goes away. Now run you DIO program and it should run fine.
The botto
mline is, dont abort the program. If it has no functionality incorporated to stop it depending on some condition, then incorporate it.
Please do let me know if my suggestion helped.
Sincerely,
Sastry V.
Applications Engineer
National Instruments

HT201263 I get an error code every time I try to restore my iphone 4.

My iphone had some issue and now it only comes on when I plug it into a computer. When I do that the "plug into itunes" symbol comes on the screen. When I attempt to restore the iphone it makes it partially through the restore but always ends with an error code, normally 2001 or 2006, but sometimes others.

Check out this article: http://support.apple.com/kb/TS3694#error2001
Click the disclosure triangle next to "Error 2000-2009…"

TS1591 Hi, i keep getting an error message when ever i try to restore my iphone 3g? how can i get pass this stage?

Similar Messages

Maybe you are looking for