TS1591 I Jailbroke my ipod and tried to restore it but it will not turn on

I Jailbroke my ipod then i tried to restore it, then after i thought it was restored, it got stuck on the apple screen and isn't recognized by itunes when I plug it in

That's what happens when you jailbreak. You have violated Apple's terms of use and warranty and won't be able to get help here. All I can say is try Recovery Mode here: http://support.apple.com/kb/HT1808

Similar Messages

  • I'm not sure how to use this site....but here goes, I have a samsung galaxy and it's fully charged but it will not turn on, can someone give me some solutions as to how I can get it to work?

    I'm not sure how to use this site....but here goes, I have a samsung galaxy and it's fully charged but it won't turn on, can someone give me some solutions I can use to fix this problem???

    Try this website. Yes its sprint but it might help you. http://support.sprint.com/support/article/Troubleshoot_issues_related_to_your_Sa msung_Galaxy_S_II_not_turning_on_completely/WTroubleshootingGuide_542_GKB51165-T rend?INTNAV=SU:DP:OV:TSIS:SamsungGalaxySIi-AsYouGo:TroubleshootIssuesRelatedToYo urSamsungG

  • I let my battery completely go down and am now charging it, but it will not turn on!  I need help!

    I let my iphone4's battery go completely down and am now trying to charge it, to no avail.  It won't do anything!  How do I wake it up???

    paulcb Texas, USA
    Re: My Iphone 4 are completely ded. Can not turn it on and the battery was fully loaded     May 4, 2011 2:40 PM    (in response to harklein) 
    Try resetting your iPhone by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    razmee209 - This is where I got my answer!  And it really worked!

  • Am operating Windows 7, 64 bit and tried downloading addons/themes but they will not install in Firefox

    I have tried downloading (successfully) addons and themes however Windows 7 tells me that there is an error and it does not recognise the software and cannot open it. Therefore am unable to change or add to Firefox. Am also using Word 2010 sxo am not sure whether or not this is causing the problem.

    If you didn't install those addons directly into Firefox, use File > Open File... in Firefox to install them.

  • I forgot my password for my ipod and tried to restore it now it wont turn on. what do i do?

    i forgot my password for my ipod and tried to restore it now it wont turn on. not sure what to do. HELP?

    The first way you can connect the iPod to the computer it was originally configured on, and open iTunes. When you disconnect iPod from the computer, it will no longer be locked. You then can go into the preferences and turn off the lock. If you don’t have access to the original computer or it just does not work, you can jump to the second method. The best fix for any iPod problem is the classic “restore your iPod to factory settings.” That this will erase all data on your iPod and take you back to day one, but you can just add your music and data back to iPod from iTunes. This is the true benefit of the iPod / iTunes relationship.

  • I'm having trouble with my Ipod- I tried to restore it but keep getting a message - the ipod could not be restored. an unknown error occurred(1413)

    I'm having trouble with my Ipod- I tried to restore it but keep getting a message - the ipod could not be restored. an unknown error occurred(1413)
    Mt computer has been freezing up on me lately and I think it messed up my Ipod when it quit right in the middle of downloading and got shut off.

    That's because you jailbroke your phone. You can't get help here.

  • I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card)

    I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card).
    Things to note:
    I have been unable to update firmware on this computer for about a year now. Im not sure why.
    I am running a bootleg copy of Windows XP on this computer, I would not like to spend $149 to get Windows 7 if possible.
    any thoughts on the matter would be greatly appreciated, thank you.

    Why don't you take your 'old' MBP into your local Apple Store and have them check out everything that's wrong with it - and I mean everything? Then, when you get an estimate about how much it would cost to get the machine completely repaired, ask about the Apple flat-rate repair pricing?
    It's worth a shot - and with what you may save, you can put in the bank for a new MBP.
    Clinton

  • I have an iMac that I am running OSX 10.8.3 on.  I keep trying to install 10.8.4 but it will not install.  I tried updating and installing several times and it restarts the computer but it will not install the software.  My machine is about 8 months old.

    I have an iMac that I am running OSX 10.8.3 on.  I keep trying to install 10.8.4 but it will not install.  I tried updating and installing several times and it restarts the computer but it will not install the software.  My machine is about 8 months old so, it's in the newish range.  HELP!

    Sometimes the App Store version doesn't work correctly. In this case, install 10.8.4 with the Combo version > http://support.apple.com/kb/DL1659?viewlocale=en_US&locale=en_US
    The Combo installer is the safest way to update OS X, and it allows you to update more than one computer with a single download

  • I drained my ipad's battery and trying to charge it. but it won't turn on. i tried it overnight but still the ipad is dead. can somebody help me?

    i drained my ipad's battery and trying to charge it. but it won't turn on. i tried it overnight but still the ipad is dead. can somebody help me?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    Fixing an iPad Home Button
    http://tinyurl.com/om6rd6u
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • I had quicktime pro, I upgraded to snow leapoard and installed iLife and lost quicktime pro. How do I get it back.  I tried re installing quicktime but it will not let me??

    I had quicktime pro, I upgraded to snow leapoard and installed iLife and lost quicktime pro. How do I get it back.  I tried re installing quicktime but it will not let me??

    Mac OS X 10.6 includes QuickTime versions 10.0 and 7.6.3. The QuickTime 7 player will only be present if a QuickTime Pro key was present at the time of installation, or if specified as part of a custom install, or individually downloaded:
    http://support.apple.com/kb/dl923
    Snow Leopard update 10.6.4 included an update to 7.6.6 (if installed). You can install it from the above link  even though it says for 10.6.3. It's the same version of QuickTime Player 7.6.6.
    (Only QuickTime Player 7.6.3 or 7.6.6 can be updated to "Pro".)

  • I was trying to update my phone to ios 7. There was an error and it stopped. Now my phone will not turn on.

    I was trying to update my phone to ios 7. There was an error and it stopped. Now my phone will not turn on.

    Try recovery mode as described here.  You may have to try to enter recovery mode more than once to succeed.
    http://support.apple.com/kb/ht1808

  • Hello, I can't turn my iphone 4s on, it just broke down and now there's just the black screen with the apple logo on it. So I connected it to itunes and tried to restore it, but than always the errors 1603

    Hello, I can't turn my iphone 4s on, it just broke down and now there's just the black screen with the apple logo on it. So I connected it to itunes and tried to restore it, but than always the errors 1603 & 1611 appeared! please help me!!

    You may have a faulty USB cable. Try another.
    Make sure you are following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
    Disconnect the USB cable from the iPhone, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
    Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
    If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
    Use iTunes to restore the iPhone.
    If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Select the device in iTunes and choose "restore from backup".
    If you still can't get it to work, you have done all you can and only Apple will be able to help.

  • I tried to put ios 7 on my ipad 2 but then it took me to recovery mode then I got the new itune and tried to restore it but then it stops in the middle

    I tried to put ios 7 on my ipad 2 but then it took me to recovery mode then I got the new itune and tried to restore it but then it stops in the middle

    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • I plugged in my iphone 5S and locked the screen 20 minutes later I tried to open the phone it will not turn on i treid reset and that wont work I have a black screen

    i plugged in my iphone 5S and locked the screen 20 minutes later I tried to open the phone it will not turn on i treid reset and that wont work I have a black screen,
    I tried just holding down the power key...NOTHING

    Do a reset, hold down the home/sleep button together until you see the apple logo and then release.

  • I have blocked my iphone 4 and tried to restore it but hen I did it asked me for my itunes password that I dont remember. My phone seems to be stuck on this stage now :( anyone know how to get around this? Thanks

    I have blocked my iphone 4 and tried to restore it but hen I did it asked me for my itunes password that I dont remember. My phone seems to be stuck on this stage now anyone know how to get around this? Thanks

    There is no way to get around activation lock, you must recover your password for the AppelID that it is locked to:
    http://iforgot.apple.com
    iCloud: Activation Lock

Maybe you are looking for

  • ITunes 7.0.1.8 experiences - Here's what got fixed for me...

    After news of the iTunes 7.0.1.8 update broke out today, I downloaded it and have used it for a little while. I'd thought I'd share my experiences so far, but please take note that I did not do any CD burning/importing tests, nor do I own an iPod to

  • How to merge 3 slideshows into one

    I have 3 slideshows (projects) and I want to make them into one slideshow.  How do I do that?

  • MIRO BADI 'INVOICE_UPDATE'

    I am using BADI 'INVOICE_UPDATE' to update a flag 'ZLSPR' in header data on SAVE in MIRO transaction. but the method 'CHANGE_AT_SAVE' in this BADI only has import parameters. No export parameters. Can anyone advice: 1) if I can use this method to cha

  • Was Photoshop CS6 for Mac matchd for a new product apple 5k display ?

    Apple issued a new product iMac with Retina 5k display on 18 Oct, 2014 on market . This display has a high resolution of 5120*2880. I want to know: Photoshop CS6 for Mac was designed for this display ? Can Canon full size photo that is 5760*3840 show

  • New Version of the Azure Active Directory Module and PowerShell 2.0

    Since the last upgrade of the Azure Active Directory Module for Windows PowerShell (64-bit version), we are no longer able to load it in an application targeting .NET Framework 3.5 SP1. The error message that we receive is: Could not load file or ass