TS1599 did this solve the problem for anyone?
did this solve the problem for anyone?
Hi,
I believe the problem is "Firefox can't establish a connection to the server at www.verizon.com." which is still not working for you.
Have you tried another browser? or Firefox in safe mode http://www.wikihow.com/Start-Firefox-in-Safe-Mode
Similar Messages
-
Went through this step-by-step, but alas it did not solve the problem. For some reason I can download mail on my Macbook Pro and iPhone, but no my iMac. Connection Doctor shows all green lights. This started today when I was prompted to re-enter incoming mail server passwords. I re-entered passowrds yet again to make sure they were correct. Rebuilt the inBox. Connection Doctor continues to show all green lights, but am still unable to download mail to the inbox. Has anyone else ever run into this problem?
I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2. My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone). I was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did.
-
I have 2 Iphones, registered under the same AppleID. Mine, and my mom's. I recently (today) did the software udate for her phone, and ever since-she receives every message i send to my girlfriend, and every response that my girlfriend sends to me. I read up on Imessage, and checked the settings on both phones. On each phone "imessage"was turned on, so i turned Imessage off. Will this solve the problem of my mom receiving every message that i send and receive? Also, if i turn Imessage back on, on my phone-will i still have privacy to text?
Why not create a second Apple ID? Wouldn't that solve the problem much more straightforwardly?
Here's a helpful website: http://www.apple.com/support/appleid/ -
I cannot shut dow my MacBook Pro using the apple icon (as it was suppose to be), actually I have to press and hold the on/off buttom. I have taken twice for Mac dealer and they did not solve the problem. What must I do? I would to remark that I have installed 2 antivirus and uninstalled one of them. Since then I have facing this troublesome issue. Thanks
Uninstall the other AV software. They are not needed. All they do is cause trouble like you are having now.
If you have been forcing the Mac to shut down with the power switch you may nave corrupted your disk. You should repair it with disk Utilty to remove any corruption the shutdwons may have cased.
Allan -
After updating to ios6. I am unable to have voice control in my Fiesta Titanium has this been a problem for anyone else or just my problem?
I am an activist when it comes to rip-offs and I intend to set up a group to pressure the Ausralian government to legislate to make all computer software producers to make all new software compatible with all old software AT NO COST to the user.
I thought about that myself, but when it comes to Windows XP. It is peculiar that software companies get away with "selling" software that suddenly stops working properly. The problem with XP is of course an environmental one as well. There is a huge number of fully functional PCs that suddenly are no longer supported by Microsoft, and that are not powerful enough to take newer supported MS operating systems. What MS basically recommends people is to throw them away with a horrible cost for our environment. -
I recently switched from an iPhone to an Android phone. I cannot receive text messages because Apple will not "release" my number from iMessage. I see others have had the same issue. How did you solve the problem, if you did?
This tech note addresses your problem: iOS: Deactivating iMessage
-
How should i solve the problem for the exception.
<b>Web is below:</b>
Error when processing your request
<b>What has happened?</b>
The URL http://xxxxxxx.xxxxx:xxxxxx/sap/bc/bsp/sap/xxxxxxx/result.htm was not called due to an error.
<b>Note</b>
The following error text was processed in the system D50 : The current application triggered a termination with a short dump.
The error occurred on the application server sapcidev01_D50_00 and in the work process 1 .
The termination type was: RABAX_STATE The ABAP call stack was:
Form: DIALOG_CHECK of program CL_IMC_MODE===================CP
Form: PREPARE_MODE of program CL_IMC_MODE===================CP
Form: GET_MODE_BY_NAME of program CL_IMC_MODE===================CP
Form: SEND_COMMAND of program CL_DV_IMC_CLIENT==============CP
Form: PROCESS_COMMAND of program CL_DV_SDV=====================CP
Form: DISP_DOC of program CL_DV_SDV=====================CP
Form: DISP_AO_DOC of program CL_DV_SDV_AO==================CP
Form: DISP_AO_DOCS of program CL_DV_SDV_AO==================CP
Function: ALINK_DISPLAY_IMC of program SAPLALINK_DISPLAY_DOCUMENT
Function: ARCHIVOBJECT_DISPLAY of program SAPLOPTA
<b>What can I do?</b>
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system D50 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server sapcidev01_D50_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server sapcidev01_D50_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 151 -u: 117846 -l: E -s: D50 -i: sapcidev01_D50_00 -w: 1 -d: 20070320 -t: 062938 -v: RABAX_STATE -e: MESSAGE_TYPE_X
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
<b>Run ST22 and information is below:</b>
Source Code Extract
Line SourceCde
1 METHOD DIALOG_CHECK.
2 DATA: GUI_FLAG TYPE SY-BATCH.
3
4 * IMC NUR in Online-Modus ? (kein Batch und dunkle Batch-Input-Betrieb)
5 IF GUI_IS_ON IS INITIAL.
6 CALL FUNCTION 'RFC_IS_GUI_ON'
7 EXPORTING
8 LOGIN_CHECK = ' '
9 IMPORTING
10 ON = GUI_FLAG.
11
12 IF GUI_FLAG <> 'Y'.
13 IF RABAX IS INITIAL.
14 CLEAR EXISTS.
15 ELSE.
>>>>> MESSAGE X005(IMC).
17 ENDIF.
18 ELSE.
19 GUI_IS_ON = 'Y'.
20 EXISTS = 'X'.
21 ENDIF.
22 ELSE.
23 EXISTS = 'X'.
24 ENDIF.
25
26 ENDMETHOD.
i can access the other bsp web.but this bsp application raises the exception. Who can help solve the problem?
I appreciate your help.Is it SAP BSP application or custom?
If its custom,check whether you are using any MESSAGE statements. Handle all the Exceptions from Class/Methods/Function module to avoid the Dump.
Raja T -
I have downloaded Firefox for the First time, Firefox can not connect to any website (Unable to COnnect), but IE can. I have followed all the directions on the page for firefox can not load when other programs can (Firefox connection settings,IPv6,DNS Prefetching, firewall settings)
== This happened ==
Every time Firefox opened
== I downloaded it for the 1st time ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729; MSN Optimized;US)http://support.mozilla.com/en-US/kb/Firewalls
http://support.mozilla.com/en-US/kb/Cannot+connect+after+upgrading+Firefox
http://support.mozilla.com/en-US/kb/Error+loading+web+sites
http://kb.mozillazine.org/Error_loading_websites -
I only edit videos every few months and the last time I edited a video was around 6-9 months ago. At that time, I noticed AME was only using a single core of the CPU and contacted Adobe who instructed me to disable core parking, which worked. After disabling core parking AME used 100% of all 12 logical cores to process the video and all was good. Then last week, I decided to edit another video and noticed AME was very slow and checked and it was again only using a single core to process the video, but core parking is still turned off. By slow I mean that a 10 minute video with the lens distortion correction preset and one video transition effect is estimated to take nearly 3 hours to complete. For comparison, the GoPro software processed the same clip with the same effects in 20 minutes. Also, through troubleshooting with Adobe over the last few days, I have also tried downloading previous versions of the software but the prior versions have the same issue.
The video I'm trying to edit was shot on a GoPro Hero 4 Black with 1080p Wide at 60 frames per second. The default video format for GoPro is .mp4. The output settings I'm using when I export from Premiere Pro to AME are H.264 with the YouTube 1080p HD.
My system:
ASUSSabertooth X79
Intel core i7 4930k (6 physical cores, 12 logical cores)
16GB DDR3 Quad channel RAM
Samsung 830 SSD 128GB
NVIDIA GeForce GTX 460 (not CUDA compatible, I know)
Please ask if you need any additional information to help solve this problem.This has been driving me CRAZY... so going over the message boards from 2 to 5 am this morning I found the best explanation I have seen. The problem is that Adobe Creative Cloud is NOT "Processor Group Aware". Windows parses any more than 36 cores into "Processor Groups" and while the Pro version of Windows 7 & 8 can handle 256 threads they have to spread them across multiple processor groups.
Simple Version: AREA | How many cores does 3ds Max support?
Microsoft's Explanation: Processor Groups (Windows)
Clearly, this is an Adobe Problem... If any engineers are reading this PLEASE review the below and incorporate it into your next build of Creative Cloud!!!
https://msdn.microsoft.com/en-us/library/windows/hardware/dn653313%28v=vs.85%29.aspx
Again, I bought a VERY expensive machine based on your white paper that recommended Dual Xeon Workstations. Please, Please Give us the product you PROMISED!!!
Michael -
Sound quit working but this solves the problem
Good news.......It seems that a lot of people are having the same problem with sound suddenly not working, even though all diagnostic test indicate that it is on. I unplugged the power and took out the battery for about 5 minutes. When I powered back up ......... the sound was working just fine. Give it a try. Toshiba does need to address this issue. I'm going to send in a complaint and suggest that others do the same.
Hi there Wacjude,
I would recommend taking a look at the article below for some speaker and receiver troubleshooting steps.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Hope that helps.
Griff W. -
apple inc:
how are you . i am a buyer from chengdu city of china ,i bought the iphone5s in February ,2014. i have used five months ,suddenly ,my iphone5s have some problems with the headphone.the main cause is the sound of the headphone is becoming smaller and smaller ,then i took it to apple Customer service center to check it ,at last ,they told me that some liquid get into the headphone of my iphone5s ,i am very angery to hear that ,i havenever got liquid into the headphone,and my iphone never touch any liquid.so that they canot mend the iphone for me .
this is the question what i meet now ,i hope you can give me a solution ,because the result is not made by me .i hope i can get your company reply as soon as possible.
thanks
zhaolong
chengdu city,in sichuan province ,in china
phone:13540823419
email:[email protected]hi:
friend,thanks for your reply ,can you tell me how to contact apple inc sercer?i am looking forward to your reply
thanks -
Did apple solve the problem of map,
i am in qatar ,i have iphone 4 (IOS 7) and after I determine the start and end point for the place where I want to go then i do route ,I receive this window :direction not available ,a route cannot be determined from this start location(this is old problem since ios4 maybe. plz any news about new solution .
i am in qatar ,i have iphone 4 (IOS 7) and after I determine the start and end point for the place where I want to go then i do route ,I receive this window :direction not available ,a route cannot be determined from this start location(this is old problem since ios4 maybe. plz any news about new solution .
-
I have read accounts of the same problem that I see to have missing years of bookmarks. The forum responses seem to indicate there is not solution to restoring them. Not an acceptable answer. I need to have all of my bookmarks restored since I started using Firefox some years ago. I need an explanation on how to do it. Surely the Firefox team has a solution. Expecting me to just accept there are gone and irretrievable will not work. I await a solution to the problem.
When did you lose your bookmarks?
Read this article:
<br> [[Profiles - Where Firefox stores your bookmarks, passwords and other user data]]
After you locate your profile folder, inside there is a '''bookmarkbackups''' folder. Open this folder and see if there are any files here. If you do, move on to the next step below.
Then read:
<br> [[Restore bookmarks from backup or move them to another computer#w_restoring-from-backups]]
Let me know if you run into problems with this. -
Starting in safe mode did not solve the problem
The problem of web sites failing to open by using links in e mail for LA Times and Coldwater Creek was not resolved by starting in safe mode.
Is this with clicking a link in an external program?
Try to redo the default browser (temporarily make another browser the default browser).
*https://support.mozilla.org/kb/How+to+make+Firefox+the+default+browser
*https://support.mozilla.org/kb/Setting+Firefox+as+the+default+browser+does+not+work -
My new macbook air sometimes has difficulty booting up. I reinstalled Lion twice. That soves the problem temporarily and then after a few days it reoccurs. It also has trouble at times opening mail or Microsoft Word. Any ideas? Thanks, Marty
Marty,
Can you elaborate on what you mean by "difficulty" during the boot sequence? When/where is the difficulty occurring? Are you getting to the Apple logo? Apple logo with spinning gear? Blue screen? Login window? There's many phases to the boot sequence and when it fails can go a long way in determing what's causing the problem.
Also, what sort of third party software is installed? It sounds like at a minimum you've installed Microsoft Office? Anything else?
Lastly, after you reinstall Lion do you perform a restore from backup or remigrate your data/content right back into the new OS? If so that could potentially be the problem right there. But truthfully there's more information that needs to be provided to begin recommending troubleshooting steps.
Maybe you are looking for
-
I have got problem with flash in my New Iphone5..
I have got flash problem in my new iphone5...any solution plz let me know..
-
How can i call the public void paint(Graphics g) method on click of button?
Hello, I have done this before i know its got to do something with the repaint() method but can someone show me with and example and call the paint method using AWT in a frame not in an applet.... Thank you very much.
-
Hi, How do I perform a query using SEM_CONTAINS making use of rulebases? Thanks.
-
Export list of Eloqua hosted images?
As we all know, images used in our emails are hosted on an Eloqua domain (i.e. images.clientname.com). For security purposes I am looking for a way to export a list of the images hosted. Would you know any way to do this? Thanks a bunch!
-
Hi mac users, I have been using my ibook with my lexmark printer for a couple of years without too many problems. Just now I have been trying to print out a google map but it just freezes when I press print. I can't then cancel and get away from the