TS1630 Can't hear from speakers only headphone. Tried restarting, unplugging and replugging headphone. Anyone else have this issue?
Can't hear from speakers:(.
Many have had this issue. Just search the forum or look in the "More Like This" box.
Similar Messages
-
I can't login to Facebook from the app or on Safari. Is anyone else have this issue? I deleted FB from my iPhone 4 and reinstalled it. Still didn't work.
Make sure you have checked off iCloud contacts in your Contacts app under Groups in upper left corner.
-
I did the recent update on my ipad 7.0.4 and now it keeps freezing up and can not use it. Tried reboot and works for a second then freezes right up again. Anyone else have this issue or know a fix?
Madmonkey,
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
Gaylefromnewhope,
Seems like you tried this all ready and it didn't help.
Next might be to reset all settings.
Settings > General > Reset > Reset all Settings
Note that when you do this you will not lose data but you will have to enter all passwords again.
If that doesn't help you might tries a restore of your iPad using iTunes on the computer you normall sync with. Do a backup and save all data first. Or
Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. -
after the update, my time, name, etc - all disappeared from the right upper finder bar. Anyone else have this issue?
First, make sure they are all still enabled in the respective System Preferences.
If the are, then do you have any third-party menu extras? They will often interfere with the others if they are not compatible. -
It seems as if when I push my home button there is a loud click or a clicking noise that shouldn't be there. If I push the home button in certain areas or kind of on the side it's not so bad. Also it seems as if the button is kind of loose or wiggles a little bit and can also feel the little silver ring and seems as if it's either not on properly or the home button is sunken in pretty good. I was at the Apple Store and checked out some display models and didn't notice it on those and they all felt solid. Has anyone else had this issue or experienced this? Any and all suggestions will help greatly...I just want to know if it's normal or how I should go about taking care of it...thanks!
ok...the doctor is in!....well, yes I agree with other posts concerning "clicky" crunchy touch id/home buttons...ah... we do swaps, cleanings, alcohol wipes....NO NO NO! yes dirt can and will trap inside the extreme minor spaces around the home button and the screen cutout..yes twirling a q-tip round the button only stuffs grime deeper in, but can clean the edge...in this case, that crunch you hear (new out-of-box), its a very popular notice that most do hear a crunchy glass-like snapping sound...being that the touch id does have a sensor ring on the outer side, the actual noise your hearing is ........wait for it......MISS-ALLIGNMENT!!!! yes... pop that sucker open, remove bracket....what do you see??. touch id pressed thru and adheared around the ends of the button...and also most cases, not perfectly aligned..that noise is the actual ring brushing against the screen hole cutout causing metal and glass to bind against eachother... re-seating the button will correct the issue..being that theyre so close together, the slightest miss-alignment can cause that annoying crunchy click sound. find a swap that doesn't...ok that one works but now the silent switch is loose!!!!! ive seen it all
-
Two songs from Maroon 5 'Overexposed' downloaded from the itunes store play at accelerated speed. Anyone else have this happen?
Welcome to the Apple community.
Try deleting the problematic tune (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer. -
I can't access my Numbers documents now that I have OS Mavericks 10.9.3. It says I need to buy an upgrade for 19.99 to access them. Anyone else have this problem?
If you upgraded from previous OS, Look in Applications folder for an iWork folder and launch old Numbers from there.
If you clean installed, look for your old install disks for iWork and reinstall.
They will run on Mavericks but they need to be there. -
My daughter bought a 4th generation ipod classic without a charger. The ipod was working just fine, but then we tried to charge it using a brand new charger for an Ipod Touch. It won't charge and someone online someone posted that there ipod touch charger worked on the ipad, phone and whatever else he had but it wouldn't work on the classic. Anyone else have this same issue? Any solutions?
The ipod did not come with a power cord as we purchased it used from ebay. The ipod was half charged when we received it and it worked well enough to transfer songs to my computer (the previous seller didn't delete their 2000 plus songs). My son then used the same cord on his computer to transfer the songs, but processed an update to the ipod and after that,it wouldn't work. So, I'm not sure if we received a bum ipod, an update issue or we have a charger issue, but the cord we used to transfer the songs came from my son's brand new ipod touch. We've also tried 2 other chargers from ipods we have in the house, 1 being a wall charger.
One individual posted online that he took his ipod classic, mac and phone overseas with one charger and it worked fine on all but the classic. So, I'm thinking that they cords may not be universal. Online I've read that it must be a 6 pin firewire, high power 2.0 usb cord. Or that I need to purchase an applie charger. We don't live close to an apple store and I'm reluctant to order one just to have it NOT work.
My daughter is learning the hard way that buying off of ebay is not always the best solution to a cash strapped 12 year old.
Any other advice is greatly appreciated. -
Can't send message on AT&T - won't connect to server. Anyone else having this issue?
All of a sudden I can't send messages on my AT&T account. I get a message that Thunderbird cannot connect to server (STMP). Called AT&T and they verified all the settings; I can access my email account on Apple Mail and through Yahoo (AT&T's email provider) yet I cannot send messages on Thunderbird. I can receive but not send.
I did try deleting the account and re-establishing it however that did not help. Anybody else have this issue?https://support.mozilla.org/en-US/kb/cannot-send-messages
-
When downloading yosemite to upgrade from snow leopard (10.6.8) the download stops partway through and appears to have overloaded the internet, causing me to have to restart the modem.I have an Imac 8,i with 4gb of ram, which is supposed to support yosemite. Anyone else having this problem?
I am not sure it is the modem, but I use a Webstar by scientific atlanta provided by the local dsl.
-
it hasnt happened before the update just would like for it to stop
HI again Andy,
The last message had some more stuff in between the "Hello" and "Regards" - I have no idea what happened to it. But nevermind...
I started up the Mini with the modem in one usb, and the speaker system in the other (M-Audio Sonica Theatre) - I have one of the Minis that have only 2 USB (and one FireWire) ports. The firewire has the external drive connected to it.
So far, as I"m typing this, I AM able to be online and use iTunes simultaneously. (both SaFari and iTunes respond slower than if I was using only one or the other, but they ARE actually working - in addition to having Adium running) - So I think what you suggested ( that is was something wonky was the USB hub) was a correct, yet assessment.
Would you have any reccommendations for USB hubs? The only thing that I have connected to the hub under normal circumstances that would be constantly "running" would be the RadioShark (even though the Radio soft isn't playing - the blue light on the RadioShark is always on) - and the speakers naturally. Everything else is of the occassional variety - iPod Sync Cable, Dual Layer External DVD Burner, and a "pass thu" to the USB ports on my Hard Drive Enclosure (which had been unplugged before the problem was noticed). The hub I current use is the
Kensington DomeHub USB 2.0 (7 ports) Weighted Hub 33118 http://www.amazon.com/Kensington-DomeHub-ports-Weighted-33118/dp/B0002FHENE/ref= sr16/002-4275642-8664817?ie=UTF8&s=electronics&qid=1187848108&sr=8-6
which (I thought) worked better than the "throwaway" ones I had used previously.
You think it is the hub or something connected to it that may be causing the problem?
Regardless, thank you for your time, and I hope to hear from you soon. -
When i plug my iphone into my computer and try to sync it with my itues library, a message comes up saying I can't sync until i update itues. When i try to update itunes, a message pops up that says itunes cannot find a pathway to my computer and it tells me to find a pathway. I have no idea what this means and i have played around with it for weeks now. Can anyone help me??
The first message says "The feature you are trying to use is on a network resorce that is unavaliable. Click ok to try again, or enter an alternate path to a folder containing the installation package." Then when i click ok a message that pops up says "The path cannot be found. Verify that you have access to this location and try again, or try to find the installation package "iTunes64.msi" in a folder from which you can install the product itunes."
That's perfect, thank you.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Does anyone else have this issue where Only a few files do not sync?
Adobe Creative Cloud Desktop Sync Does Not Work! Adobe Cannot Figure Out Why. In the creative cloud folder the green check-marks that indicated that the file is synced do not appear anymore.
Wow! I am sorry to hear that! 100 files is Major. Really 1 file is too much with all the claims being made by Adobe. I have had 2 chat sessions and a 3 hour phone call and still no avail. I have used the creative cloud cleaner I have wiped it from my system re-downloaded several times updated to the latest version. Now I know It isn't just Me. Thank You For Your Valuable Time! OK ADOBE Needs to get on this pronto, we are losing work and the problem is on Mac And PC. Very interesting. If You absolutely must force a sync You must do it online in your creative cloud website:( Hopefully this will be resolved soon. If you have a breakthrough please let me know. Thanks.
-
How do you solve the problem of the magic mouse constantly disconnecting? I have changed the batteries and turn it on and off, but the only way to get it to reconnect seems to be re-starting the computer. Any thoughts? Thank you.
Greetings Beth,
Wireless devices are susceptible to interference. Review this article for common sources: http://support.apple.com/kb/TS3048#5
They are also very sensitive to low power. Make sure you are using VERY fresh batteries. If they have been sitting on a shelf for months they don't count as fresh IMO.
Troubleshooting steps to try after you read that article at the top:
Remove the following to the trash: Macintosh HD > Library > Preferences > com.apple.Bluetooth.plist
Restart the computer and re-pair the mouse and keyboard
If issue persists reset the SMC:http://support.apple.com/kb/HT3964
If the issue persists reset the PRAM:http://support.apple.com/kb/HT1379
Hope that helps! -
Elements 10, cannot read cr2 files from EOS 6D, anyone else have this issue?
Sorry my discussion topic is my question. Followed by if so, how did you fix it or what suggestions do you have? Thank you.
You need PSE11 or PSE12 for the 6D. You may wish to wait to upgrade to the forthcoming PSE13. Or consider the Photography Plan – Lightroom + full Photoshop for $9.99 pm (or local currency.)Alternatively, download and install the free Adobe DNG converter to convert your CR2 files to the Adobe universal Raw format and the files will open in PSE10(keep your originals as backups and for use in the camera manufactures software)
Windows download (.exe file) click here DNG Converter 8.6
Mac download (.dmg file) click here DNG Converter 8.6
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial
Maybe you are looking for
-
Can i switch my computer to a different apple ID
I just bought a MAC mini, The problem is I now have multiple apple id's. I had an old one for my iTunes that I forgot about because my PC went down several years ago. I purchased an iPhone and used my e-mail address for the apple ID. I have been abl
-
Equium A100 - CD no longer burning but DVD still burn
Good morning all got a problem with my laptop i recently tried to burn a cd and in no matter what program i use says something wrong with disc etc etc and burns a small amount and out pops the tray. However I can still burn DVDs so I'm confused any h
-
How to run GP process from ABAP Workflow
Hi All, Can anybody tell me in detauls how can I run a GP process from ABAP workflow. What configuration are required for that in J2EE engine side as well as ABAP side. Thanks Chandan
-
I want to convert a String into an array of bytes
I am working with telnet programming with java, where I want to convert login name and password of an online user in 'String' format to 'Bytes', plz help me. Which Input or Output Stream I can use
-
Sunfire 480R - new Solaris 10 install
Immediatly after the probing of all the NIC cards I get: message overflow on /dev/log minor #6 -- is syslogd(1M) running? message overflow on /dev/log minor #6 -- is syslogd(1M) running? message overflow on /dev/log minor #6 -- is syslogd(1M) running