TS1630 My iphone4 is no sound audio some time volume on some time of

My iphone4 ios 6.1.3 is no sound audio video volume button some time sound on some time sound off please help me

I have the same issue, it's definitely with Mozilla - I'm on 3.5.9. It doesn't happen even with my old crappy version of IE 6. I've followed all the igoogle recommendations and it didn't fix the problem

Similar Messages

My Iphone4 speaker wont sound play any audio and all it says when i try turning it up is " Ringer" But doesent show the bars the turn up or down. Any help? :/

My Iphone4 speaker wont sound play any audio and all it says when i try turning it up is " Ringer" But doesent show the bars the turn up or down. Any help? :/

Hey Hype.Beast.187,
Here are some troubleshooting steps for not being able to hear sound through your iPhone speakers. I'd pay special attention to steps 8, 9, and 10 in your situation:
Resolution
Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
Make sure the Ring/Silent switch is not switched to silent.
While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
Restart the iPhone.
If restarting the iPhone doesn't resolve the issue, try restoring the device.
If the issue persists, go to the Service Answer Center - iPhone for information on service.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
All the best,
David

Garageband is not picking sound from builtin mic (rMBP). I recorded some tracks, now it is not working. All other apps can use the mic. Monitoring is switched ON at GB, it picks sound only some other app, eg. Skype, is used to access the mic.

Garageband is not picking sound from builtin mic (rMBP).
I recorded some tracks, now it is not working. I have checked GB Preferences, Audio/MIDI > Audio Input > Built In Microphone.
All other apps can use the mic. Dictation, Skype etc. can use the mic!
Monitoring is switched ON at GB, it picks sound only some other app, eg. Skype, is used to access the mic.
Can any one help me, Please!
Many thanks!

I have foud the solution - rather stupid. The system setting for audio input was at 70%, increasing it to 100% solves the problem!

Recently I Have lost the ability to hear the sound in some news, youtube, videos. THE Sound works on my IPAD, but not for some videos. Why is this?

I Recently lost the ability to hear the audio in some news, facebook and youtube videos. The sound/audio works fine on my iPad. Why is this? Is there some way to change or reset settings? Cookies?

iOS 8.2 has since fixed this bug. YAY!

MacBook Pro Boot Camp Sound Audio Drivers Do Not Work with Miscrosoft Vista

I installed Vista via Boot Camp on my new 15" i7 MacBook Pro. After full MS Vista patching and Apple Boot Camp driver installation, the sound/audio does not work.
After some searching on the net, I've noticed that this is perhaps a widespread problem. Are there any solutions or an indication of when this will be fixed?

When you mean no sound, do you get the volume slider but nothing comes out or do you not get the volume slider at all?
Go to control panel, sound (you might need to switch to classic view to see the one im on about), then the "sounds" tab, there should be audio clips that you should be able to play, if the laptop has picked up the sound controller in it.
If you cant play these (greyed out) then the driver isnt installed properly.
There should be a update option in the boot camp program that is installed in your vista partition, run that, and if it fails you can try what is below.
Try going into device manager, uninstall/remove the drivers under the heading "sound, game and audio controllers" reboot the machine and it should install them back in again.
If it doesnt and asks for a disc, then they'll be on your max os x disc, but not sure you can install drivers individually this way. might have to reinstall the boot camp drivers from scratch.
Ive had this proplem on PC's (not macs) with drivers from manufacturer of the machines not working after windows updates. Fixed by using drivers from the audio controller manufacturer. But dont think its the same issue you are having.

Change Default Surround Sound Audio Mapping

Anyone know if there is a way to change the default surround sound audio mapping in Premiere CS6?
For example, when working with six mono channels being sent to a 5.1 submix. I manually set where each of the six go (front left, front right, center, lfe, rear left, rear right). Then I route that 5.1 submix to go to a stereo submix so that I can hear the downmixed audio in my laptop speakers. When my project is exported to a video file, I turn off the last step of routing the 5.1 submix to the stereo submix, so the file has all six channels of audio in their proper place. When I change the 5.1 submix to feed the master output, I get the option to re-select where each surround element should end up in the master output. In our production facility, we have surround in the order I mentioned previously. I noticed that Premiere has the front, then rears, and then center and lfe listed. It is annoying to have to re-select my surround preferences everytime I switch between monitoring the stereo downmix and the surround output.
Any way to change what Premiere sees as the proper order for surround sound channels? I know there's the audio option to change mapping, but when working on a laptop, you only get the left and right speaker, no surround settings there.

that's tied into our entire facility audio spec, and every video file we have would have to change audio mapping, in addition to re-wiring a lot of air-chain devices.
In broadcasting, it seems like it's more common to do surround sound the way we're doing it: L, R, C, LFE, Ls, Rs. I understand why some might want to do it another way, which is why it would be nice to be able to change it and leave it a certain way. I know I can submit a feature request, I'm just trying to find out if anyone knows how to do it already.

I change the hard disk from 500gb to 750 gb then i heard qw sound in some interval pls advice me., i change the hard disk from 500gb to 750 gb then i heard qw sound in some interval pls advice me?

i change the hard disk from 500gb to 750 gb then i heard qw sound in some interval pls advice me., i change the hard disk from 500gb to 750 gb then i heard qw sound in some interval pls advice me?

I wish it was under better circumstances, but welcome to the discussions!
It certainly sounds like a bad HD to me. Back up your data and then take it in or call Apple.

No sound for some items, sound for others

my powerbook can play sound in terms of a DVD or CD or MP3, but cannot play sounds (ends up muted) embedded on webpages or in a video game.
suggestions?

pixelinpink,
No sound from some applications, but system alert sounds play (Mac OS X 10.3, 10.4) may be helpful.
;~)

Sound/audio is off for news/video clips Mac Pro , ML

sound/audio is off for news/video clips Mac Pro , ML

>certain clips
What ARE those clips?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Report back with the codec details of your file, use the programs below
For Mac http://mediainfo.massanti.com/
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project

Why can't i get sound from some of my movies when i'm watching it on my macbook pro, but it works on my iMac?

why can't i get sound from some of my movies when i'm watching it on my macbook pro, but it works on my iMac?

I need the exact model number, not just the series.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

MacBook Pro - Intel - No Sound/Audio

I have no sound/audio!
The things I have done are:
Checked the audio setup in System Preferences - All is ok, internal speakers on etc..
Updated all software and restarted.
Reset PRAM and SMC.
Things that I think may be related to the problem:
My battery has the "Service Battery" symbol.
Sound stopped working on an international flight (could this possibly affect anything in a MBP?)
So I'm a little stumped as what to do, I can't go under warranty as it's over 2 years old. I need to find a solution without spending money at Apple.
Any suggestions more than welcomed.
Thanks,
Jim

My next suggestion is what Shootist007 recommends, take it to the Apple store as it sounds as if it could be a hardware problem. Apple will diagnose it for free, then give you an estimate for repair. They usually work of a flat rate and will repair anything they find wrong. I had a MBP repaired for this rate rate and they replaced the logic board, hard drive, led backlight,keyboard, for the flat rate. (I just thought the HD had died) They found stuff I was not even aware of, so it is basically a new machine for about 1/3 the cost of replacement. (It was my kids and I didn't have the $$$$ to replace it. Well worth checking out. All the best

Can an iMac output surround sound audio similar to Dolby 5.1 sound in Windows?

Is it possible for my iMac to output surround sound audio similar to Dolby 5.1/7.1 surround sound in Windows?
Mileman10

Yes on 5.1,
Here is a "how to" article:
http://guides.macrumors.com/Configuring_5.1_Surround_Output_in_Mac_OS_X
Roger

No sound in some video in apps on ipad2 after ios6

No sound in some video in apps on ipad2 after ios6

1. Double-click the Home button and swipe Task Bar to the right
2. Check the volume and mute settings
http://i1224.photobucket.com/albums/ee374/Diavonex/6d3191ba.jpg

No sound on some apps on I pad

No sound on some apps on. I pad. Sound fine gore music on I tunes

Try this:
(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset.

How to add a sound on some slides?

How to add a sound on some slides? Not only one slide and not all the slideshow?
Is it possible? It must be!

Keynote is not Powerpoint and vice versa. The way music is currently handled in Keynote has been explained. If you wish music to play across only a few contiguous slides, you make them a seperate file and hyperlink to them using an object for the hyperlink.
Once built, and properly used, the transition from one set of slides to the next set is smooth and the audience will not know (or care) if there is one, two or fifty hyperlinked files behind the curtain. What they see is the content, the message and the effective use of a visuals to backup your actual live presentation. The files you create are not the presentation, you and all you bring to the audience are the presentation. You are simply using a tool to assist youself to help your audience better understand your message.
Using Keynote is found by many presenters to be an easier application to use. If you find Powerpoint easier, by all means use it. Your message will be basically the same to your audience, if done properly.
Feedback is a good way to ask for changes but given the rate of change, learning those few simple workarounds and using them effectively will help you use Keynote (or Powerpoint - yes there are limitations there too) to easily put your point across. Your audience will sense your frustrations as a distraction so it is better to accept the few limitations and make your presentation shine in spite of them.
Good luck.

TS1630 My iphone4 is no sound audio some time volume on some time of

Similar Messages

Maybe you are looking for