TS1630 no sound and wont shut off. tried everything

Hi, I have a 7 month old, or about, iPhone 4S. I can't listen to music or hear any sounds at all, but it will vibrate. My phone refuses to shut off, and will turn on a few moments later. I have tried everything and i have read everything in the articals and Apple Support. Is there anything that I can do or should I look into a new phone?

You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.

Similar Messages

  • Downloading app seems to have crashed ,now have striped screen and wont turn off, tried the 2 button10sec trick but still nothing dturn off, tried the 2 button 10secill not turn off tried the 10sec two button trick still not working any suggestions please

    while downloading apps seems to have crashed ,now have striped screen and wont turn off, treid the 2 button 10sec trick but still not responding any suggestions please ?

    Try here:
    iOS: Not responding or does not turn on
    If not successful, let the battery fully drain. Then charge for an hour and try again.

  • NEED HELP IPOD WONT TURN ON AND WONT CHARGE ETC TRIED EVERYTHING

    IVE TRIED EVERYTHING! PLEASE HELP!

    Maybe you could actually describe what you have tried. "TRIED EVERYTHING" doesn't actually tell us what you've tried, so we have to start at the very begining.
    Have you seen this;
    iPod Won't Turn On

  • Macbook Pro running slowly, bad crunchy(?) sound, and now shuts off randomly

    Hi there,
    I have an early 2011 13" Macbook Pro running OSX 10.8.4. For the past six months or so, my computer has been running relatively slowly. I brought it into a shop, but the guy couldn't figure out what was wrong with it. In the past two months or so, the sound has been terrible, whether it's watching youtube videos or listening to something on itunes or playing a game. it will sound fine, until like 30 seconds in when it will go all crunchy and garbled and terrible sounding. I don't know how else to describe it. Just now, my computer randomly turned off in the middle of me playing a game, and at first it wouldn't turn back on. I'm a little freaked out by that, as I'm a graduate school student and my computer is my life. I'm just trying to figure out what's wrong with it. :/
    I've attached the crash report from the shut down here. Does anyone know what this means? Thanks for your help!
    Interval Since Last Panic Report:  1191632 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    C6E3BE7C-97DE-F1F4-8E38-E7E0F8024D03
    Mon Sep 30 01:04:16 2013
    Machine-check capabilities 0x0000000000000c07:
    family: 6 model: 42 stepping: 7 microcode: 26
    Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz
    7 error-reporting banks
    threshold-based error status present
    extended corrected memory error handling present
    Processor 0: machine-check status 0x0000000000000005:
    restart IP valid
    machine-check in progress
    MCA error-reporting registers:
    IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
    IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
    IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
    IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
    IA32_MC4_STATUS(0x411): 0xb200000081000402 valid
      MCA error code:            0x0402
      Model specific error code: 0x8100
      Other information:         0x00000000
      Threshold-based status:    Undefined
      Status bits:
       Processor context corrupt
       Error enabled
       Uncorrected error
    IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
    IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
    Processor 1: machine-check status 0x0000000000000005:
    restart IP valid
    machine-check in progress
    MCA error-reporting registers:
    IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
    IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
    IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
    IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
    IA32_MC4_STATUS(0x411): 0xb200000081000402 valid
      MCA error code:            0x0402
      Model specific error code: 0x8100
      Other information:         0x00000000
      Threshold-based status:    Undefined
      Status bits:
       Processor context corrupt
       Error enabled
       Uncorrected error
    IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
    IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
    Processor 2: machine-check status 0x0000000000000005:
    r

    Run an Apple Hardware Test:
    http://support.apple.com/kb/ht1509
    You may have yo use the OPTION and D keys to start it.
    Ciao.

  • My iphone froze on the password screen and wont shut off or reboot

    Please help me , i live in Jamaica and bought it there and no one here can help me . all that i see is a spinning dial

    Not sure what you mean by "reboot" but if you haven't already, try to reset it: hold the on/off and home buttons until you see the Apple logo (ignore the off slider that appears first), then release.  If you can't reset it you'll have to try to put it in recovery mode and restore it, as described here: http://support.apple.com/kb/ht1808.

  • I restored my iphone 5c and it shut off and now it wont turn back on i tried to restore it nothing its fully charged

    i restored my iphone 5c and it shut off and now it wont turn back on i tried to restore it nothing its fully charged and i tried to hold the home button and lock button it shows the logo and shuts off again

    1st, try to do a hard reset if that does not work try this article
    http://support.apple.com/kb/ts3281

  • TRIED TO DOWNLOAD SOFTWARE ios7.1.2 TO MY IPAD. iPAD FROZE ON THE APPLE PICTURE AND WONT TURN OFF OR RESPOND AT ALL.

    TRIED TO DOWNLOAD SOFTWARE ios7.1.2 TO MY IPAD. iPAD FROZE ON THE APPLE PICTURE AND WONT TURN OFF OR RESPOND AT ALL. IPAD MAY NEED MORE FREE MEMORY FOR THE NEW SOFTWARE BUT HOW DO I FREE UP MEMORY IF THE IPAD IS FROZEN. CAN THIS BE DONE ON iTUNES OR THE APPLE SITE?

    Took my iPad to the Apple store today and they were able to unfreeze it with a simple forced reset. This is done by pressing the Off button at the same time as you press the button on the front and hold for about 20 seconds. The new software had successfully installed and the iPad had frozen when it was starting up again after install. Not sure why this simple process can't be part of a FAQ page on the Apple site.

  • I have a imac g3 dv se, snow and after about 10minutes of it booting it makes a popping sound and the turns off, then it wont turn back on for another 5-10 minutes

    i have a imac g3 dv se,500mhz, snow and after about 10minutes of it booting it makes a popping sound and the turns off, then it wont turn back on for another 5-10 minutes any suggestions?

    Actually sounds like classic symptoms of a failing PAV (power-analog-video) on that model. Historically that's the weak spot in the G3 iMacs.
    The lack of active cooling in the G3 iMac puts a lot of heat stress on this board and they eventually fail from overheating. Right now the board is still working as long as it's cool--it only fails when temps inside the computer rise.
    About the only way to preserve the computer's life is to mount a 120mm fan directly on the case where the handle is--that's the exhaust port. The fan has to be positioned to PULL air out through that vent. It's an ugly solution to the eye but it has been done around here more than you would think.
    Also make certain the bottom of the computer is not blocked. It the computer is sitting on a tablecloth or placemat, or there are loose papers on the desk under the case, it cannot get enough air into the bottom-mounted air intakes. Make/find some blocks to set the iMac a minimum of one inch (2.5CM) from the desk and move anything that can be "inhaled" from under the computer.
    Even with such measures, the PAV board will eventually fail and be unrecoverable. It's a good time to start saving for a newer computer.

  • My iPhone 4 can not reboot after upgrading to iOS 6; keeps trying and cannot shut off either.

    My iPhone 4 can not reboot after upgrading to iOS 6; keeps trying and cannot shut off either.

    I FINALLY got it to work on BOTH iPhone 4 and iPpad 3.  Here is what I had to do:
    Had to DELETE all e-mail accounts including icloud.
    Did a hard reset (hold down button on top right corner and round button on bottom center)
    Then once it came back on, the iPhone had ALL of the accounts still on it and it was receivng e-mail.
    The iPad receive e-mail until I did the steps above 5 times.  Plus, I had to add back all of the e-mail accounts vs. on the iPhone 4 they were there when my phone came on.
    Now I am receiving e-mail on both devices normally.
    No clue why this happened, but Apple needs to find a fix ASAP.

  • My Ipod froze and it wont shut off.

    Hey I just got my ipod and it wont shut off and it wont move nothing its just froze on one screen? Please help I dont want it to burn on me. I just got it.

    Reset your ipod by holding menu and select
    http://docs.info.apple.com/article.html?artnum=61705

  • I was recently updating my phone to the newest software after ios7. It froze for quite a while so I tried holding down the home button and the power button and it shut off. Now it says I have to restore my whole phone but an Error keeps occurring?

    I was recently updating my phone to the newest software after ios7. It froze for quite a while so I tried holding down the home button and the power button and it shut off. Now it says I have to restore my whole phone but an Error keeps occurring? It brings me to a website saying the steps to possibly fix it but I don't find them helpful

    http://support.apple.com/kb/TS1275

  • Iphone wont turn on. i plug it into charger and it stays at 87% and then i take it out of the charger and it shuts off. and then i try to turn it on and wont turn back on until i plug it back into the charger. HELP ME PLEASE!!

    iphone wont turn on. i plug it into charger and it stays at 87% and then i take it out of the charger and it shuts off. and then i try to turn it on and wont turn back on until i plug it back into the charger. HELP ME PLEASE!! how do i fix this?!

    Hello StephanieeLovezYou,
    Thank you for the details of the issue you are experiencing with your iPhone.  I would be concerned too if my iPhone was only turning on when connected to power.  I found an article with steps you can take when you encounter an issue like this.  I recommend following the steps below:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    You can find the full article here:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Have an iphone 4 all of a sudden turned off and wont turn on, tried holding buttons, connecting it to pc to restore it, is there any other way i have pretty much tried everything

    Have an iphone 4 all of a sudden turned off and wont turn on, tried holding buttons, connecting it to pc to restore it, is there any other way i have pretty much tried everything, what do I do

    Hi Sian.riches,
    Welcome to the Apple Support Communities!
    I know it can be both concerning and frustrating if your iPhone will not turn on as expected. I also know your have done some great troubleshooting already. I would suggest reading over the attached article and trying the troubleshooting steps provided to ensure everything has been done.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Have a great day,
    Joe

  • I was using my ipod touch and it was fully charged and it shut off and it wont bring me to the home screen

    i was using my ipod touch and it was fully charged and it shut off on me and when i go to charge it all it shows is the apple sign

    Try the remaining items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Internal mic wont shut off even though its disabled. How do I fix this?

    Im trying to run samplitude music studio mx software and use the line in and mic in ports to record. The external mic that's built into my laptop wont shut off, and records background noise on my tracks. I have an HP Pavilion dv7-6c95dx with an i7-2670QM processor running windows 7 home premium. How do I disable it from somewhere else besides the control panel, because it suggests the mic is disabled already? will I need a different laptop to run the software?

    Hi,
    Did you solve this problem because I have EXACTLY the same one.  I am running Samplitude Music Studio 2013 on Windows 7 Home Premium on a Pavillion D6.  I have high quality external mike input ruined becaus the on-board condenser mike will not disable, even though I disabled the "Integrated microphone array" as recommended.  Is it because some software or other device driver keeps it active? Samplitude has no disable function for input devices and it makes no difference if you run WDM, MME or ASIO device drivers.
    I did have to replace the computer screen once. Possible glitch? I hear DELL stopped ptting built-in mikes into their laptops!
    Any advice/help deeply appreciated!

Maybe you are looking for

  • Why can't we change anymore the cursors behaviour???

    I am frustrated to see that in LV 8.2 we can't change anymore the behaviour of the cursors in graphs. There used to be a selectable option between Free, Snap to point... very usefull! Now, we must delete the cursor and create a new one to change its

  • Getting ora-01113 error while opening Database after recovery

    HI all, we have a test database. I lost my entire database including DBFs, controlfiles, Archived logs, redo log files. But I have a hot backup copy of the lost database. I tried to recover database using backup copy I restored my control files and a

  • Out of HD memory

    have dual HD. the primary HD is running our of memory with 1.01 GB left; thus having difficulties with software upgrades. the 2nd one is wide open with 60 GB left. How can fix this without having startup of application problems? thank you hai

  • Intercompany billing with thirdparty customer order document flow

    Hi all . I have recieved a problem in our Intercompanyprocess Heres the scenario 1. Create customer order with at least 1 itemcategory TAS 2. Creates an PO from the requisition 3. recieve and register invoice from vendor via MIRO 4. Create customer i

  • Clearing fields

    Hello, I have some fields set up with error messages. for example in a date field, if the user enters a date in the future and tabs out of the field, an error message appears indicating that the date cannot be in the future. The problem with this for