TS1646 Security Code issue, please HELP
I have verified ALL info with my credit card, entered ALL my info in EXACTLY the way it appears; still receive "Please enter valid Security Code" Is it possible to switch cards on my profile or do I need to "verify" the old card?
"Security code"? you seen to mean the iTunes Store password. "correct three number code" - the passworkd can't be "3 numbers" - This is the minimum requirments for an Apple ID password:
"Your password must be at least eight characters long. It must contain at least one number and two letters, one upper case and one lower case. It cannot include three consecutive and identical characters. It cannot be the same as your Apple ID or be any password you have used in the past year."
If you mean the "security code" of your credit card, make sure your address was entered correctly unsing USPS specifications
Similar Messages
-
Unable to send a security code. Please contact your help desk for assistance in FIM 2010 R2
Hi,
I have been Successfully registered with emailid in FIM 2010 R2 Password Registration Portal.but when go in FIM 2010 R2 Password Reset Portal and gives all right answers of questions after this gives fallowing
error:Unable to send a security code. Please contact your help desk for assistance.
Regards
Anil kumarHi,
Thank's for response.
I have been cheked mail server is UP and i am able to send mail through FIMService account.
but this is not sending Securitycode notification to any users when i login through any user gives correct answering to the Question that i was set at registration time.this gives fallowing error:
Unable to send a security code. Please contact your help desk for assistance
and Eventviwer Error Below:
The error page was displayed to the user.
Details:
Title: Unable to send security code
Message: Unable to send a security code. Please contact your help desk for assistance.
Source:
Attributes:
Details: Microsoft.IdentityManagement.CredentialManagement.Portal.Exceptions.OneTimePasswordDeliveryException: ValidationError:UnableToSendSecurityCode ---> System.ServiceModel.FaultException: ValidationError:UnableToSendSecurityCode
at Microsoft.ResourceManagement.WebServices.SecurityTokenServiceClient.RequestSecurityTokenResponse(Message request)
at Microsoft.ResourceManagement.WebServices.SecurityTokenServiceClient.RequestSecurityTokenResponse(RequestSecurityTokenResponseType request, ClientOptionsHelper clientOptionsHelper, MessageBuffer& messageBuffer)
at Microsoft.ResourceManagement.WebServices.Client.AuthenticationRequiredException.Authenticate(AuthenticationChallengeResponseType[] authenticationChallengeResponses, MessageBuffer& messageBuffer, ClientOptionsHelper clientOptionsHelper)
at Microsoft.IdentityManagement.CredentialManagement.Portal.Common.ResetProxy.GetChallenge(String domain, String userName, ChallengeContext gateChallengeResponse)
at Microsoft.IdentityManagement.CredentialManagement.Portal.Common.ResetProxy.GetNextChallenge(String domain, String userName, ChallengeContext gateChallengeResponse, FaultExceptionHandlerDelegate faultExceptionHandler)
--- End of inner exception stack trace ---
at Microsoft.IdentityManagement.CredentialManagement.Portal.Common.ResetProxy.GetNextChallenge(String domain, String userName, ChallengeContext gateChallengeResponse, FaultExceptionHandlerDelegate faultExceptionHandler)
at Microsoft.IdentityManagement.CredentialManagement.Portal.Components.DriverBase.GetNextGate(IGateControl currentGate)
at Microsoft.IdentityManagement.CredentialManagement.Portal.Reset.Next()
at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
CorrelationId:
RequestId:
ErrorCode: 3013
CaughtTime: 05/02/2014 08:43:26
Web Portal: FIM Password Reset Portal
Session Id: 21uppbuy3vutsm55sytd4b55
Regards
Anil Kumar -
Why is it that when I'm changing my debit card details and my postal address I receive a message that says my postal code is not valid?and yet I'm certain of what my postal code is.Please help.Regards,
Ztshosane wrote:
... I receive a message that says my postal code is not valid?...
Try here > http://support.apple.com/kb/TS1646
If necessary... Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
Headerrenderer issue -Please help
Headerrenderer issue -Please help
hi
I have a datagrid and I am doing a custom sorting on the grid(by getting data from DB).
I achieve this by capturing the headerrelease event of datagrid .In thee venthandler I will query from DB and do event.preventdefault to prevent standard grid sorting.
Now I need to display my own custom ascending/descending arrows in the header.i have created an header renderer for this,
In the headerrenderer I am lsitening to the headerrelease event of datagrid and in the eventlistener, as per the sortfield, i am trying to make the sort arrow visible/invisible.
But somehow making the sort arrows visible/invisible is not working.The initial arrow works fine.it is shown the correct column(Name) as done in the init() method.
The eventhandler is invoked on clicking the column headers and all the alerts are shown.
Please see the headerrenderer code below and help me.(code is not complete only the relevant part is included)
<?xml version="1.0" encoding="utf-8"?><mx:HBox
xmlns:mx="http://www.adobe.com/2006/mxml" width="100%" height="100%" horizontalScrollPolicy="off" creationComplete="init()" implements="mx.controls.listClasses.IDropInListItemRenderer">
public function init():void{
headerLabel = dataField.label;
_dataGrid.addEventListener(DataGridEvent.HEADER_RELEASE,sortChanged,false);
if(_dataField.localeCompare('Name')==0)asc.visible=true; }
private function sortChanged(e:DataGridEvent){
var dg:DataGrid=e.currentTarget asDataGrid;
varcolumn:DataGridColumn = DataGridColumn(e.currentTarget.columns[e.columnIndex]);if(_dataField.localeCompare(e.dataField)==0)
if(asc.visible ||(!asc.visible&&!desc.visible))
Alert.show(
'in..');
asc.visible=false;
desc.visible=true;
else if(desc.visible){
asc.visible= true;
desc.visible=
false;
else{
asc.visible=
false;
desc.visible=
false;
]]>
</mx:Script>
<mx:Text text="{_headerLabel}" />
<mx:Image source="{ascIcon}" id='asc' visible="false">
<mx:Image source="{descIcon}" id='desc' visible="false"/>
</mx:HBox>I got the solution!!
i need to assign the headerrendereer to the columns dynamically inorder for this to work:
if anybody wants to know details of solution let me know -
Mid 2010 15" MBP i5 A1286 POWER ISSUE-PLEASE HELP-
The MBP works fine when mains connected but the only issue is every time I take the charger out it shuts down on me!!! So I have checked with a multitester & looks good the only thing i find hard to check for power is the battery itself as its hard to get a good connection, also I took to local Apple store & they checked with a new battery but said its still same issue so the guy disconnected nearly all the connecters off to check if they causing issue & he said now the battery is charging.
So they still have the laptop to do further tests etc, but I’m not sure what could be the problem hear as maybe there is some component which is bad so the battery’s not charging or what else could be the issue please help & advice as I’m really confused as if it was something to do with the logic board then surely it would not even charge even after checking with the multitester or like Apple genius done by disconnecting other components...
ANY HELP OR ADVICE WOULD BE HELPFULL,
THANKS GUYSTHANKS FOR THE HELP GUYS!!! BEEN AROUND 5 DAYS & NOT ONE PERON HAS HELPED...
BUT YEAH THANKS AGAIN...
WASTE OF TIME THIS IS... -
What's wrong with my code? please help....
when display button is clicked it must diplay the remarks but it didn't happen...
what's wrong with my code? please help
here is my code.....
import java.applet.Applet;
import java.awt.*;
import java.awt.event.*;
public class Area extends Applet implements ItemListener,ActionListener
{Label arlbl = new Label("AREA");
Choice archc = new Choice();
Label extlbl = new Label("EXPENDITURE TYPE");
CheckboxGroup extchk = new CheckboxGroup();
Checkbox fchk = new Checkbox("FOOD",extchk,true);
Checkbox schk = new Checkbox("SHELTER",extchk,false);
Checkbox echk = new Checkbox("EDUCATION",extchk,false);
Checkbox uchk = new Checkbox("UTILITIES",extchk,false);
Label exalbl = new Label("EXPENDITURE AMOUNT");
TextField exatf = new TextField("",20);
Label remlbl = new Label("REMARKS");
TextField remtf = new TextField("",30);
Button disbtn = new Button("DISPLAY");
Button resbtn = new Button("RESET");
String display;
public void init()
{add(arlbl);
archc.add("MANILA");
archc.add("MAKATI");
archc.add("QUEZON");
archc.add("PASAY");
add(archc);
archc.addItemListener(this);
add(extlbl);
add(fchk);
fchk.addItemListener(this);
add(schk);
schk.addItemListener(this);
add(echk);
echk.addItemListener(this);
add(uchk);
uchk.addItemListener(this);
add(exalbl);
add(exatf);
add(remlbl);
add(remtf);
add(disbtn);
disbtn.addActionListener(this);
add(resbtn);
resbtn.addActionListener(this);
public void itemStateChanged(ItemEvent ex)
{int n = archc.getSelectedIndex();
if(n==0)
{if(fchk.getState())
{exatf.setText("10000.00");
display = archc.getSelectedItem();
if(schk.getState())
{exatf.setText("15000.00");
display = archc.getSelectedItem();
if(echk.getState())
{exatf.setText("24000.00");
display = archc.getSelectedItem();
if(uchk.getState())
{exatf.setText("8500.00");
display = archc.getSelectedItem();
if(n==1)
{if(fchk.getState())
{exatf.setText("5000.00");
display = archc.getSelectedItem();
if(schk.getState())
{exatf.setText("11000.00");
display = archc.getSelectedItem();
if(echk.getState())
{exatf.setText("7500.00");
display = archc.getSelectedItem();
if(uchk.getState())
{exatf.setText("24000.00");
display = archc.getSelectedItem();
if(n==2)
{if(fchk.getState())
{exatf.setText("13000.00");
display = archc.getSelectedItem();
if(schk.getState())
{exatf.setText("7000.00");
display = archc.getSelectedItem();
if(echk.getState())
{exatf.setText("27000.00");
display = archc.getSelectedItem();
if(uchk.getState())
{exatf.setText("6000.00");
display = archc.getSelectedItem();
if(n==3)
{if(fchk.getState())
{exatf.setText("6000.00");
display = archc.getSelectedItem();
if(schk.getState())
{exatf.setText("9000.00");
display = archc.getSelectedItem();
if(echk.getState())
{exatf.setText("15000.00");
display = archc.getSelectedItem();
if(uchk.getState())
{exatf.setText("19000.00");
display = archc.getSelectedItem();
public void actionPerformed(ActionEvent e)
{if(e.getSource() == disbtn)
{String amtstr = exatf.getText();
int amt = Integer.parseInt(amtstr);
{if(amt > 8000)
{remtf.setText(display + " IS ABOVE BUDGET");
else
{remtf.setText(display + " IS BELOW BUDGET");
if(e.getSource() == resbtn)
{archc.select(0);
fchk.setState(true);
schk.setState(false);
echk.setState(false);
uchk.setState(false);
exatf.setText("");
remtf.setText("");
Edited by: lovely23 on Feb 28, 2009 11:24 PMEdit: thanks for cross-posting this question on another forum. I now see that I wasted my time trying to study your code in the java-forums to help you with an answer that had already been answered elsewhere (here). Do you realize that we are volunteers, that our time is as valuable as yours? Apparently not. Cross-post again and many here will not help you again. I know that I won't.
-
Photoshop CS6 could not update successfully. Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7 Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7 Please help me figure out how to call customer service. I would prefer to talk to someone directly.
Are you using any disk cleaner or optimization tools like CleanMymac or Mackeeper?
Regards,
Ashutosh -
I want to download a app but iTunes keep asking for security code can someone help please
What problem are you having ? Messages about security codes usually refer to the 3 or 4 digit code on the credit card that you have on your account : http://support.apple.com/kb/HT3541
-
Cannot restore my brand new iphone 4s ,got stuck in DFU mode and itunes shows error code (-1) please help?
repeatedly tried from diffierent computers and the same error code pops up (error -1)That's a hardware problem which will require a trip to the Apple store for evaluation, unless your phone has been jailbroken, then it's a corrupt hosts file (and we can't help you with that here as it is against the forum's terms of use).
-
I cannot restore my Iphone 4, I keep getting the error code 1611, please help and the Iphone keeps displaying the "Plug-In Itunes Symbol!??
http://tinyurl.com/nyj36v
-
I don't remember my security questions and I tried guessing them and now I can't buy anything for 8 hours please fix this so I can download stuff and I don't remember any of my security questions. Please help me out as soon as possible
Username188 wrote:
I don't remember my security questions and I tried guessing them and now I can't buy anything for 8 hours please fix this so I can download stuff and I don't remember any of my security questions. Please help me out as soon as possible
Go to https://getsupport.apple.com ; click 'See all products and services', then 'More Products and Services, then 'Apple ID', then 'Other Apple ID Topics' then 'Forgotten Apple ID security questions'. -
Hi there,
Hope you can help me out here.
I've recently purchased a 15" i7 Macbook pro. The machine is but 3 weeks old &, of course, very well looked after.
A few days ago, the built-in trackpad started behaving eratically. Cursor moving by itself, not responding to touch, clicking and opening things involuntarily. Not good at all. Many users seem to have had this exact same issue.
These problems seemed to miraculously stop after a few re-boots and possibly a software update? I really couldn't tell you what resolved the problem.
Unfortunately I now have a totally different problem.
There is a thin, possibly 8 to 10mm horizontal strip across the centre of the trackpad that no longer responds to touch. If I move my finger from the botom of the trackpad upwards (or vice versa), the cursor will stop momentarily as it passes over the horizontal strip. The buttons are fine and the rest of the trackpad is fine. For the moment, I've increased the cursor acceleration so that I can at least navigate round the screen with a smaller area of the trackpad. USB magic mouse seems to work fine.
If anyone else has experienced this &/or found a solution for this issue, please help me out here. I have rifled through endless threads about MBP trackpad issues with little success & do not live close to an apple store/genius bar.
This is a 3 week old machine that cost me a small fortune. To be getting software/hardware issues so early on in it's lifespan is really rather worrying for the future.
Appreciate your help here.
JI'm not sure what caused this, but I extended my lunch break and drove the machine down to the Westfield apple store. I didn't have an appointment with the Genius Bar but I managed to persuade one of the staff to speak to a technician in the workshop. She came back into the store and told me that they had replacement trackpads and that , considering the machine was only 3 weeks old, the technicians kindly sandwiched the repair into their timetable at zero cost. 2 Hours later, I now have a perfectly functioning trackpad/machine.
I can't thank them enough.
My only gripe is that I couldn't speak to a technician to find out what the problem was, how they resolved it or what causes these issues for future reference. Understanding why these problems occur often helps to build your own framework of understanding. Most of the threads i've read about trackpad issues are largely unresolved with people only speculating the problem/solution.
The initial issue I had with the trackpad's erratic behaviour seemed to be a well known problem that many are associating with a trackpad firmware update. Unless by pure coincidence I had an immediate & major hardware fault after it, which is unlikely, my personal guess is that the two issues were related. -
HT5622 i cant find where its says reset you security question? please help thanks
i cant find where its says reset you security question? please help thanks
The Three Best Alternatives for Security Questions and Rescue Mail
1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID. -
HT5312 sorry! i can't reset Apple ID security question. Please help me
sorry! i can't reset Apple ID security question. Please help me
The Best Alternatives for Security Questions and Rescue Mail
a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
b. Call Apple Support in your country: Customer Service: Contact Apple support.
c. Rescue email address and how to reset Apple ID security questions. -
Hello I am forget my security question. Please help me.
Hello I am forget my security question. Please help me.
Read this about how to change the security questions: http://support.apple.com/kb/HT5312
If you can't use these procedures you will have to contact Apple. See http://support.apple.com/kb/HT5699
Maybe you are looking for
-
Unable to replicate the Vendor Master Records
Hi I am using the transaction BBPGETVD to transfer the Vendor Master Records from R/3 ro SRM...but could not able to transfer it as I am getting an error "Organizational unit - does not exist; check entries", even through I have created Organisation
-
Java.io.File and non-unicode characters in file name
Unix filesystem object names are byte sequences. These byte sequences are not required to correspond to any character sequence in the current or any locale. How do I open a file if it has characters that do not corrospond to a valid unicode encoding
-
Can i pass parameter or global variable in view from 6i form
hi master sir can i pass parameter or global variable in view from 6i form i use view for some diff column calculation within the date then i use where date between data1 and date2 in view but view not create please give me idea how i pass external v
-
Can anyone understand this and provide a solution
Hi all, I am getting the following error messages.Could anyone provide the solution so that we can transfer the data. <b> No transfer structure is available for InfoSource 0CUSTOMER_TEXT in the source system</b>: In the source system,there is no tra
-
hi gurus , there is some doubt in Time constraints 1 , 2 and 3 . Can u plz Give me detail of time constraints with example so that it can clear the picture. thanks and regards. Ruchi