TS1669 I have trouble when trying to send a email to my computer JavaScript keeps blocking it with a load of errors. Can anyone help vaScript keeps blocking it. I keep getting loads of errors up
I
Hi massmercury,
I want to apologize for your experience here with the service center. I am moving forward to have your case escalated for further review. Please see my private message. I will be your point of contact until our Customer Advocate team reaches out to you.
Best regards,
Bgriffin2
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!
Similar Messages
-
I have an error message coming up when trying to send an email which says 'sending the message failed because you're exceeding the limit' can anyone help me to resolve this please
Try reentering the password in your iCloud mail settings.
-
I am getting error message "the recipient was rejected by ther server" when trying yo send an email.
I am getting error message "the recipient was rejected by ther server" when trying yo send an email.
How do I fix it??Hello, Oldershaw.
Thank you for visiting Apple Support Communities.
Here is an article I would recommend going through when experiencing issues with mail.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Cheers,
Jason H. -
When trying to send an email this message appear: No se ha podido firmar el mensaje
When trying to send an email this message appear: No se ha podido firmar el mensaje. Se ha producido un error al intentar firmar este mensaje con un certificado de “[email protected]”. Compruebe que su certificado para esta dirección sea correcto y que la clave privada correspondiente esté en su llavero.
Hi Srini,
OS is XP
Database = 10g
EBS - 11.5.10.2
When i tried with simple code like below i am getting mail .
CREATE OR REPLACE PROCEDURE APPS.send_mail (p_sender IN VARCHAR2,
p_recipient IN VARCHAR2,
p_message IN VARCHAR2)
as
l_mailhost VARCHAR2(255);
l_mail_conn utl_smtp.connection;
BEGIN
SELECT value value1
INTO l_mailhost
FROM v$parameter
WHERE name like '%smtp%';
l_mail_conn := utl_smtp.open_connection(l_mailhost, 25);
utl_smtp.helo(l_mail_conn, l_mailhost);
utl_smtp.mail(l_mail_conn, p_sender);
utl_smtp.rcpt(l_mail_conn, p_recipient);
utl_smtp.open_data(l_mail_conn );
utl_smtp.write_data(l_mail_conn, p_message);
utl_smtp.close_data(l_mail_conn );
utl_smtp.quit(l_mail_conn);
end;
Can you please let me know if i am wrong in the following one
1. After running the program, the output saves at ''/u07/applmgr/dev/devcomn/admin/out/DEV_wg-oa-01/RGADWALA.5929617"
This information i got from fnd_concurrent_request table.
* Do i need to have Write and Read permissions for the above said path
2. The above said path I can see in the V$parameter table for column Name = 'utl_file_dir'
3. I even created an Directory Name as 'OUT_DIR' in all_directories table with same path as above.
I hope i have cleared your doubts, can you please let me know where exactly i am going wrong in my earlier procedure.
Regards,
RR -
When I try to open images I am getting this message: "The file “image.jpg” couldn’t be opened because you don’t have permission to view it." "Which I've tried - but it's not responding, plus its with all images now. Can anyone help?
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.iBooksX
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
When trying to send an email I can not access "insert addresses" link, what is wrong?
I am using Windows XP and when trying to send an email using Yahoo email I can not insert address from that link. It will not open. I can not find a way to solve this. Help. Thanks
See this:
[http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox] -
I have a MacBook Pro, I want to copy Itunes files to an SD card to play in my car, the SD Card doesn't appear in Itunes when I insert it, and I don't know how to convert the files to the correct format, can anyone help?
Thank youSo it seems from reading the COMMAND manual that my first issue is that I used a 16GB SD card, and the manual says it will only recogize up to a 2GB SD card. I did use my MB Air's SD card slot and crated a folder and dragged the music files to it, then to the card. So I am going to get a 2GB card and try that next. Otherwise just stick with the iPOD connected. At least that is 8GB
-
my macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?
This can be caused by a number of issues.
Was everything working and then suddenly stopped??
Or is this a new clean setup and has never worked.
Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
Check the IP the MBP gets including dns and gateway..
Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get. -
When i try to Restore my iPod touch 4th gen it says "error" can anyone help!?
When i try to restore my iPod touch 4th gen it says "error" can anyone help?!
Was "error" the complete wording of the error message?
-
Trying to sign into icloud photo stream getting error message (can't sign beacouse oer error) can anyone help?
Hi fatackett7!
Here is an article that can help you troubleshoot this issue with your Photo Stream:
iCloud: My Photo Stream troubleshooting
http://support.apple.com/kb/ts3989
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
i have an iphone 3gs it has been dropped i have connected it charge and its saying reactivation requiered then asks to connect to itunes when i connect it to the laptop it will not connect to itunes but i dont no why can anyone help plz
Sounds like you broke it.
-
Hi, I have a old IPod Nano, rarely used. I don't know how to download a podcast to it. Can anyone help me?
You will need both License Keys the Lightroom 4 upgrade key and the Lightroom 3 key. You can download the latest LR 4.4.1 from the site below. Just make sure you get the appropriate one for your operating system.
Adobe - Lightroom : For Macintosh
Adobe - Lightroom : For Windows
Install then you first enter the LR 4 upgrade serial number and then the LR 3 serial number when prompted. -
When I try to drag titles or special effect into my clip in imovie it doesn't work can anyone help me?
Assuming you have (1) signed out, then (2) waited 30 minutes and it didn't work you will need to contact iTunes again.
-
i have an iphone 3gs and everytime i try to restore it on itunes it just keeps saying an unknown erroe has occured (29) can anyone help me with this??
Hello Laura,
Thank you for posting in the Apple Support Communities. I found an article that has information about Error 29:
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
You can find the full article here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Best,
Sheila M. -
I cannot send pictures with text messages...can anyone help?
I cannot send pictures with text messages...can anyone help?
Hello Drussell52
I would love to assist you! Let's get those pictures flowing. Are you seeing an error message? Can you use the Browser on the Z10? What zip are you in?
I look forward to your reply.
JoeL_VZW
Follow us on Twitter @VZWSupport
Maybe you are looking for
-
It just sais, Can not connect to App store etc. all the alerts have to do with wifi, which im already connected to
-
Internet connection while using windows8 on bootcamp
I'm using macbookair2013. I installed windows 8 on bootcamp and trying to access internet . but there is no internet connection its like windows cannot found my wireless software. However, when i'm using windows bootcamp on my parallel virtual app i
-
Applications Browser Logon & Connection Refused & Cannot reconnect to gatew
Help, When running applications logon http://bh001.home:8000/OA_HTML/AppsLocalLogin.jsp I recieve a connection refused error. Associated with this is the following when running "adstrtal.sh APPLSYS/APPS" are the following errors =====================
-
Seeking advice for backing up Xserve G5 w/ RAID PCI card
Hello all! I'm a newbie to Macs and server admin, and I have inherited the job of setting up a server at work for file storage. I'll do my best to give a concise description of our set-up - I'm looking for some advice on the last few odds and ends...
-
S_TABU_NAM not reflecting in USOBX or USOBT
Hi, we have implemented the note 1481950, 1522661 and 1516880 (for the new auth. concept with S_TABU_NAM) Now system is checking for s_tabu_nam when the check on s_tabu_dis fails.This works fine. But the problem is the object s_tabu_nam is not appea