TS1702 All apps on my iPad shut down after a few minutes of use. Any suggestions ?

All apps on mi iPad shut down after a few minutes of use ? I've updated all the apps and restarted my device, no difference. Any suggestions ?

1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo.

Similar Messages

  • My Macbook Pro shuts down after a few minutes of using.

    It shuts off after 10 minutes or less of using.  I can feel that my laptop is hot around the ports area and I am using almost every port.  Could that be the cause of the shut off  because of overheating?  My settings for battery and screen saver are turned off and I am plugged in with the power adapter.  Please help it's frustrating to do any work when this keeps happening.  Thanks in advance.

    It would help if you would indicate the exact model of your MBP and the OS you are using.
    Open Activity Monitor and look for any applications that may be using a lot of CPU resources.
    Install iStat pro and see what kind of temperatures your MBP is generating, especially the CPU.
    Please post back.
    Ciao.

  • My iPad shuts down after a few minutes and reverts back to Apps section. what can I do to fix?

    How can I fix this problem.??

    Try this:
    1. Double-click the Home button to see all Inactive Apps
    2. Hold the Apps down for a second or two until you see the minus sign
    3. Tap the minus sign to close App
    4. Reset iPad. Hold the Sleep and Home button down for about 10 second until you see the Apple logo (ignore the red slider)
    Note: if the above doesn't work you may have to Backup and Setup as new.

  • I have a MacBookPro and just downloaded the new Firefox 4.0.1, whne I use the laptop wireless every the compute shuts down after a few minutes. What can I do?

    I have a MacBookPro and just downloaded the new Firefox 4.0.1. When I use my laptop wireless the computer shuts down after a few minutes. What can I do?

    Do you experience the same issue using other browsers, e.g. Safari?

  • My computer shuts down after about two minutes of use or at startup. What is the problem?

    My computer shuts down after about two minutes of use or at startup. What is the problem?
    Yesterday I used it for about ten minutes.
    Yesterday was the first time using it after about 5 days.

    Could you tell me how to check my system log, and how to tell if it is the disk cache? I am pretty sure it is not the GPU as I was having the problem using a Quadro 4000 as well.
    Thanks!

  • My iPad keeps shutting down after a few seconds of use. just started happening. fully charged. help?

    my pad (2) suddenly is shutting itself down after a few seconds of use. fully charged. brand new. been working fine. help?

    You can try this:
    Close all Inactive Apps
    1. Double-click the Home button to see all Inactive Apps
    2. Hold the Apps down for a second or two until you see the minus sign
    3. Tap the minus sign to close App
    4. Reset iPad. Hold the Sleep and Home button down for about 10 second until you see the Apple logo (ignore the red slider)

  • Watching Apple TV from I pad,iPad shuts down after approx 7 minutes and I have to restart. Can I stop this

    When trying to watch Apple TV from my iPad,film or sport, after approx 7 minutes the iPad shuts down and I have to reconnect. How can I stop this happening

    it's your network that is not stable
    I would troubleshoot the general network setup look if the router had the latests firmware
    if the wifi channel was the default one then I would change it as other near by wifi networks using the same channel would interfere
    if the wifi router supported it then I would switch to 5Ghz wifi as the 2.4Ghz frequency is a pretty busy frequency
    and I would place the wifi router a place where it would provide best possible cover for the devices
    and I would try to see if connecting the appletv by ethernet to the wifi router would provide a more stable setup

  • My Pavilion G4 shuts down after a few minutes when I plug it in

    My hp pavilion G4 shuts down automatically after a few minutes when I plug it in. It does not happen regularly so I'm not sure of the reason of why it happens. The laptop shuts down and when I press the power button, the light on the power button just flashes but it does not start. Even if I remove the charger and push the power button, it doesn't start. I have to remove the battery and place it again to be able make the laptop start again.

    Hi rierufied,
    Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that you are having a problem with your g4 shutting down randomly after you turn it on. When this happens do you get an error message at all? If so, what is the error message? Does this happen both when you are on battery and when it is plugged in? What operating system are you using? What is the product number of your notebook?
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Vibe 3.4 SSL link shutting down after 2-3 minutes of use

    I have a strange issue on a vibe 3.4 installation on SLES 11.3
    Vibe is installed using the default configuration and the port mapping is
    also configured as standard and works well for internal and external access.
    However the https:// secure link only works for 2 -3 minutes after
    the"/etc/init.d/teaming start" command then the port shuts down preventing
    any further secure links. The normal http:// links continues to work fine.
    The problem is we are trying to use the office integrations which only allow
    a https:// link
    There is something on the server that shuts the secure port 8443 down after
    2-3 minutes of operation
    Can anyone please give me some help as to where to start looking for the
    cause of this.
    Thanks
    Mark Behrens

    Mark,
    you can try other solution. It uses bouncycastle library.
    1. Check Java installation (you can have more on one machine) configured in Vibe. In file /opt/novell/teaming/teaming-config/installer.xml you can find:
    <JDK JAVA_HOME="/usr/lib/java/latest" type="Sun"/>
    2. Download file https://www.bouncycastle.org/downloa...dk15on-151.jar and copy it into [java]/lib/ext and [java]/jre/lib/ext (probably you have only of them, it's ok).
    3. Edit file [java]/lib/security/java.security and [java]/jre/lib/security/java.security (you have probably only one of them).
    find:
    security.provider.1=sun.security.provider.Sun
    security.provider.2=sun.security.rsa.SunRsaSign
    security.provider.3=sun.security.ec.SunEC
    security.provider.4=com.sun.net.ssl.internal.ssl.P rovider
    security.provider.5=com.sun.crypto.provider.SunJCE
    security.provider.6=sun.security.jgss.SunProvider
    security.provider.7=com.sun.security.sasl.Provider
    security.provider.8=org.jcp.xml.dsig.internal.dom. XMLDSigRI
    security.provider.9=sun.security.smartcardio.SunPC SC
    security.provider.10=sun.security.mscapi.SunMSCAPI
    and replace it with:
    security.provider.1=sun.security.provider.Sun
    security.provider.2=org.bouncycastle.jce.provider. BouncyCastleProvider
    security.provider.3=sun.security.rsa.SunRsaSign
    security.provider.4=sun.security.ec.SunEC
    security.provider.5=com.sun.net.ssl.internal.ssl.Provider
    security.provider.6=com.sun.crypto.provider.SunJCE
    security.provider.7=sun.security.jgss.SunProvider
    security.provider.8=com.sun.security.sasl.Provider
    security.provider.9=org.jcp.xml.dsig.internal.dom.XMLDSigRI
    security.provider.10=sun.security.smartcardio.SunPCSC
    security.provider.11=sun.security.mscapi.SunMSCAPI
    Restart Vibe and test all again.
    regards
    Pawel

  • Airport Extreme B.S. shutting down after a few minutes!

    I have one of these,it's the one with the USB port and Ethernet port.Bought it a few months ago and it had been working perfectly until this weekend when I was out of town.Apparently,my Roadrunner cable/internet/phone service was disconected this last Sunday due to a billing error;my girlfriend called them and they quickly restored our service while she was still on the phone with them.
    Well after that she calls me saying that she could not get to the net and explained to me what had happened so I figured that all it was needed was a router reset and told her to disconect the power cable from the ABS and reconnect it after a minute or so...
    Fast forward to today,and the ABS keeps shutting down by itself after 2-3 minutes after I turn it back on.What I have done several times is try another wall outlet and it seems to work momentarily but it only stays on for no more that 3-5 minutes at a time until it shuts itself down again.So now I have done this back and forth switching between power outlets many times,even reset the BS to default and reloaded it to the 5.7 version of the firmware and still keeps misbehaving.I'm thinking it could be:
    1.The power cord itself going bad(is this possible)? ,or
    2.The internal power supply.
    Any ideas???

    Yes,that's the first thing I did before trying another outlet.It's almost as if either the BS itself,or some part of the power cord overheats and fails after a couple of minutes...:(

  • Iphone shuts down after a few minutes of non-use (after 1.1.3 update)

    After the update, if I do not use the iphone for a few minutes it basically goes dead and I need to power it on and it reloads the system...I tried to reinstall the update, delete all my data and start fresh...nothing has worked...I really do not know what else to do...it really seems a software issue...
    Any thoughts? Thanks,

    i am having the same problem... i turned the auto-lock off so my phone never sleeps and in return it runs my battery down even faster and calls people on accident... even more odd is that the car charger i bought from at&t has alweays worked fine until the 1.1.3 update and it all of the sudden started sayin that this accessory wasn't designed for an iphone and that i should put it in airplane mode so i wouldn't get interference... i have restored several times and nothing helps... i have been all over the net looking for a fix but finally had to call apple and they are sending me a loaner and i have to ship mine back to them for repair... should be here tomorrow (i hope)... beware there is a $30 loaner phone fee... as bad as it sounds i'm glad to hear that i'm not the only one with this problem...

  • My iPhone heat up and shut down after a few second of using then can't turn on for an hour.

    My problem is that, after a year my iphone 4 after a short time of use started to heat up than shut down. So i cant use my iphone for 2 month. Please help !!

    Try a reset ..
    Tap Settings > General > Reset > Reset Network Settings
    You will have to re enter the Wi-Fi password.
    Tips for speeding up iOS 7 > If You Think iOS 7 Feels Slow Here’s How to Speed It Up

  • 8520 shuts down after a few minutes

    I recently upgraded my OS on my curve 8520 and now i hear static when talking with someone for a few minutes and thte screen goes white. I have to take out the battery and plug it in to turn it back on or it stays stuck on the white screen and is non-responsive. I like the new features on the upgrade but I think it is what is draining my battery not even sure if it is the battery. I used to hear beeps when the batter would die and the battery indicator would start to show in red. Since the upgrade again I hear static and the phone goes white. What can I do to fix this. I can't operate like this it is dangerous and I travel alot.

    Remember, Safe Mode is a diagnostic tool. The best process would have been to see if Safe Mode has the problem. If it does, then the core OS is at fault. If Safe Mode does not have the problem, then something added on is the culprit. But, deleting them in Safe Mode and not then shifting back to Normal mode prevents you from diagnosing which is the culprit -- especially if you delete several.
    A good process would be Safe Mode, delete one app. Normal mode, see what happens. If the behavior continues in normal mode, return to Safe Mode and delete another app, and return to Normal mode. Repeat until the behavior ceases in Normal Mode...then you know the culprit...the last one you deleted.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Safari shuts down after 2-5 minutes of use

    hey guys, this just recently started for me about a week ago. Im just browsing the web on safari and then when loading a page, the rainbow circle thing comes on the screen and wont stop spinning. I've let it go for about 1/2 an hour and still nothing. Every time this happens I am forced to right click in the dock on safari and click force quit. I notice when I do this at the top it says "application not responding". Ive done the history clean, reset, cashe clean, restart computer but it still happens about 2-5 minutes into using the internet..any thoughts or help?
    Thanks alot

    Hi Andrew
    Sometimes 3rd party add-ons create the spinning wheel. Curious which version of Adobe Flash you are using? Go to your Finder: HD>Library>Internet Plug-ins. Click on Flash Player.plugin, then Command/I keys. In the info panel, which version is listed?
    Also, do you have any other 3rd party items installed in Safari?

  • Mac book pro mid 2009 shuts down after a few hour then will only boot after waiting and pressing power button numerous times. I am running mountain lion with most recent updates.

    Mac book pro mid 2009 shuts down after a few hour of use and then is very difficult to reboot. Sometimes I have to wait hours, sometimes I have to repeatedly press the power button and then it will slowly start a little longer each press untill it completely boots. It has done this three times know.  Each time I was watching a video.

    Try running the Apple Hardware Test - sounds as if you've hardware issues.
    Clinton

Maybe you are looking for

  • Creation of SNP planned order in Monthly Bucket though CTM plan

    Hi, Can anyone advise how to aggregate the SNP planned order generated after CTM run in Monthly bucket. Can it be done through customizing? Regards. Punit

  • Exchange 2013 - CAS Server Multi Namespace & Site Deployment

    Hello, I am currently designing the new Excahnge 2013 environment that I am looking to deploy by the end of the month. And I have come up with two designs on what could be deployed. The first being an active/passive design with a single namespace acr

  • IOS AIR apps do they need AIR installed on device?

    Hello, I am developing an app for iOS using AIR for iOS in flash cs5.5. I know for android you have to download air on the deivce first to run the apps. I don't have an iphone or ipad to test my app on yet, but am wondering if a user who is downloadi

  • Lightroom 4 and ACR 6.7

    When I import my photos from Lightroom 4 into ACR 6.7 I get a message, "The selected image uses Process 2012.  Convert to Process 2010 to adjust settings.  When I do this, I lose all of my changes I made in Lightroom 4. Thanks.

  • Ordering browse sequences

    Hello there I have been linking a RH project to FM files, crated TOCs, Indexes... all's fine except for one thing I'm trying to generate browse sequences automatically from the TOCs. However, when I try to do so, the browse sequence navigator remains