TS1702 apps install ok but will not open ????

Downloaded many apps on 3 network but although they install they will not open. OK when with o2

The network the device is connected to has absolutely nothing to do with apps working or not.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?

Similar Messages

Installed Acrobat Pro XI on Win 7, 64 bit. Program installed fully, but will not open or run.

I have tried uninstalling and reinstalling several times. Downloaded reader, no help. Adobe will not support by phone. What do I do?

Thanks, Sara.
I have done just that - I ran the cleaner and removed Acrobat entirely. Did a fresh install. Everything looked fine, was able to enter my serial number successfully, and got a successful install message. Yet when I try to open the program, it will bring up a box briefly which then disappears and the program does not launch. Subsequent attempts do not even bring up the box. No program running in task manager. This is version 11.0.07, running on Windows 7, 64 bit. I don't know if it makes a difference, but this was obtained through TechSoup.org.

Hi, I can't open my iPhoto application. The app is there but will not open. What should I do?

Hi, I can't open my iphoto application. The app logo is there but no photos pop up when I click on it. I am worried I will loose my photos. What should I do?

what does happen? What has recently changed? Is iPhoto '08 and OS X 10.7.5 correct on versions?
LN

Chrome Extension Converted & Installed Successful - but will not open.

Used the following service:
http://gallery.extensionfactory.com/labs/conversion/
I have tried both installation methods for the smart waiver extensions.
1. Using the smart waiver extension code as listed in the Chrome store
nkbhdpobafkjcgbnfoglpgemhhlbaleg
2. Downloading and converting the CRX extension file
In both instances, I was able to convert to Firefox compatibility, and it even installed in the add ons extensions area for Firefox. However, the icon to open the extension does not show.
I've already tried the following:
1. making sure the add-on tool bar was checked
2. Customizing the toolbar, but the icon didn't show
3. Restoring defaults int he customizing toolbar, icon still did not show
4. Restore firefox to defaults
5. Checked that I wasn't in a security or privacy setting that would disallow the task
So I'm at a loss - I've tried other Chrome extensions to test. I've converted them successfully, and got them into the same add-on extension screen installed in firefox. But no way to open the extension, and the icons are never recognized.
Thanks in advance for anyone that can help, as this is important for my business.
Kind regards,
Roger

okay thank you, here is what popped up:
21:55:56.613 Could not read chrome manifest 'file:///C:/Program%20Files%20(x86)/Mozilla%20Firefox/chrome.manifest'.
21:55:56.764 Could not read chrome manifest 'file:///C:/Program%20Files%20(x86)/Mozilla%20Firefox/browser/extensions/%7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D/chrome.manifest'.
21:55:56.767 While creating services from category 'profile-after-change', could not create service for entry 'Disk Space Watcher Service', contract ID '@mozilla.org/toolkit/disk-space-watcher;1'
21:55:56.988 Selector expected. Ruleset ignored due to bad selector. lastpass.css:14
21:55:57.425 info: Error while loading localization: There is no localization file for your language.
21:55:57.513 An exception occurred.
Traceback (most recent call last):
File "resource://pcnkpellnjdoldnpikpnijphebalgall/api-utils/lib/l10n/loader.js", line 18, in
resolve(request.responseText);
File "resource://pcnkpellnjdoldnpikpnijphebalgall/api-utils/lib/promise.js", line 138, in resolve
while (pending.length) result.then.apply(result, pending.shift())
File "resource://pcnkpellnjdoldnpikpnijphebalgall/api-utils/lib/promise.js", line 32, in then
return { then: function then(resolve) { resolve(value) } }
File "resource://pcnkpellnjdoldnpikpnijphebalgall/api-utils/lib/promise.js", line 112, in resolved
function resolved(value) { deferred.resolve(resolve(value)) }
File "resource://pcnkpellnjdoldnpikpnijphebalgall/api-utils/lib/promise.js", line 138, in resolve
while (pending.length) result.then.apply(result, pending.shift())
File "resource://pcnkpellnjdoldnpikpnijphebalgall/api-utils/lib/promise.js", line 32, in then
return { then: function then(resolve) { resol
21:56:07.445 1393901767445 Services.HealthReport.HealthReporter WARN No prefs data found.
21:56:17.646 A promise chain failed to handle a rejection.
Date: Mon Mar 03 2014 21:56:07 GMT-0500 (Eastern Standard Time)
Full Message: Win error 183 during operation makeDir (Cannot create a file when that file already exists.
)

Lightroom app installed, but will not open.

Lightroom app installed, but will not open

A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

I have a Macbook Pro. I updated to 10.9.4 an downloaded the trial for Creative Cloud. It downloaded and installed but will not open. I shut down and tried reinstalling. Same problem.

I have a Macbook Pro. I updated to 10.9.4 an downloaded the trial for Creative Cloud. It downloaded and installed but will not open. I shut down and tried reinstalling. Same problem.
Thanks.

I stumbled upon the solution. In addition to downloading Creative Cloud, I needed to go back to the website and download trials for the programs I want to use--Photoshop and Lightroom. Once I did that, I was in business. Would save trouble if that was made clear on the download site.
Thanks

TS1717 I have paid for the app for old masters puzzle. Says it is completed but will not open when I click on the collection. I have bought 2 now and cannot open either one.

I have paid for the app for 2 old masters puzzles. Says they are complete but will not open. What is the problem?
Thanks
Robin

Does this happen immediately after you log in? If so, one of your login items is probably causing it.

Ps installed but will not open

cloud Photoshop has been installed but will not open. I receive an error message that it needs to close. Do I need to re-install?

Did it install successfully or you received and error message?
Could you specify the exact error message? An error screenshot would help. Do mention the version of PS along with the OS.
Have you installed it using Creative Cloud or disk?
Check if you get the same issue with other adobe products.
Try rebooting the machine and check the same.
In case of same issue, you can try to re-install.

My PC has itunes in downloads but will not open or run

I have a windows oper sys, Vista. I am trying to download Itunes. It shows in my download menu, but will not open or run. Any ideas how to fix?

Hi, rvrguy.
You may find this article helpful when troubleshooting the issue you experiencing.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
Jason H.

ITunes installs properly, but will not open

I have just upgraded from iTunes 6.0.1 to 6.0.2
Everything installed correctly, and I am receiving no error messages; the program simply will not open. I have uninstalled and reinstalled multiple times, and I have exactly the same problem each time.
My music files (including ones that I purchased from Apple's music store) will open with other players, but will not open with the newly installed v6.0.2
I am running Norton Internet security, but the problem still occurs after I disable the program.
Any assistance is appreciated.
Gateway 400VTX Windows XP

Well, that annoying. So, I am a bit confused here. Does iTunes launch at all or sometimes? BTW, You need to Configure Norton to allow iTunes to open. Otherwise, it will continue to block it silently.
Do you see, under your Processes tab in your Windows Task Manager, both Quicktime and iTunes?

Some applications are not opening, including mail and Word. Clicking on the icon stirs it on the dock, but will not open it.

Some applications are not opening, including Mail and Word. Clicking on the icon stirs it on the dock, but will not open it. Any suggestions? Thank you!

Ok, that's plenty of space.
Check the S.M.A.R.T. status on your HD: Boot from install disc (insert disc > restart > immediately hold down the c key and keep holding it until you see “Preparing Installation”) > at first screen select the language and click Continue > click on the Utilities Menu in the menu bar > select Disk Utility > select your HD in the panel on the left side (the name of the HD’s manufacturer and the model number, usually the top item in the list) > look at the bottom of the main window next to S.M.A.R.T. status and see if it says “Verified” (good) or something more ominous like “Failing.”
If S.M.A.R.T. status is "Verified," run Repair Disk > click Repair Disk at bottom of main window. Run this at least twice, and keep running it until it says “appears ok” twice in a row. If that doesn’t happen, you may need a stronger utility (such as DriveGenius, TechToolPro, DiskWarrior) or if the directory is damaged beyond repair, you may need to reinstall the OS, or you may have a damaged HD which will need to be replaced (repair utilities can only repair the directory structure, not the HD itself). When this is finished, quit Disk Utility, quit the installer, and restart. Once booted normally, go to Applications > Utilities > Disk Utility and run Repair Permissions.

My outlook will not open yet all other microsoft packages will. When I click on the icon, the 'o' logo will come up for a split second but will not open the package - need to receive emails asap!

My outlook will not open yet all other microsoft packages will. When I click on the icon, the 'o' logo will come up for a split second but will not open the package - need to receive emails asap!

You're very welcome!
I meant holding the "option" (or "alt") key on your keyboard as you click the Outlook icon on the Dock, and continuing to hold it until you see the Microsoft Database Utility come up. Alternatively, you can open the utility by navigating to Applications/Microsoft Office 2011/Office and then double-clicking the Microsoft Database Utility app.
When you rebuild your database using that program, a backup copy of your original database (containing your account info, contacts, mail, calendars, etc) will be created. As a security precaution, you should also ensure you have a backup of your database (which you can find by going to Documents/Microsoft User Data/Office 2011 Identities/ and copying the contents of that folder onto an external drive).

Premiere elements 10 downloads but will not open? info says to remove disc from desktop -- when i do that it closes the program?

premiere elements 10 downloads but will not open? info says to remove disc from desktop -- when i do that it closes the program?

Hi, Ken -
Since you have a new install of OSX, you may be missing Stuffit Expander, needed to expand downloads encrypted/archived in a Stuffit format. That problem confronted me with a new machine running OSX 10.6; a download and install of Stuffit Expander fixed it.
You can download Stuffit Expander from this webpage -
http://www.stuffit.com/mac-expander-download.html
Note - be sure to get the version that matches your OSX version.

HT1277 my email displays but will not open, just the spinning icon

My email displays but will not open in my laptop or ipad. I just keep getting the spinning icon. I can recieve emails on my iphone. Any suggestions?

If Mail.app will launch on OS X and you can get to the Preferences settings and related, see the Apple Mail.app troubleshooting article for some suggestions. From there, get that working, then compare the differences between what's working and connecting, and what's not — the Connection Doctor and the Activity window should give you a pretty good idea of where things are hanging up — if not directly what's wrong — when troubleshooting the OS X Mail.app connection.

Acer Aspire E5-511. touchpad/mouse move cursor but will not open any programmes other than McAfee,

Just purchased this laptop, initial thought it was a great improvement on my 3 year old Aspire!!! Latest problem after doing a complete scan with McAfee is the touchpad or remote will move the cursor but will not open any programmes other than McAfee. The Windows symbol (bottom left hand corner) does not light up when the cursor is over it and I am unable to use windows key + C to get charms bar. For background I have been unable to install windows updates since I have had this computer, two days, hence doing a scan to look for reasons.

Thanks for your suggestion Acer-Justin. Sorted it by a switching off/reset using keyboard. Sorted update problem using Microsoft who found a problem with update system then installed Windows 10 - all appears ok for now.

TS1702 apps install ok but will not open ????

Similar Messages

Maybe you are looking for