TS1702 Cannot launch the Black Law Dictionary on iPad2

I bought Black Law Dictionary from apps store, after installed it to my iPad2, I cannot launch it. I have disscussed with vendor technical team a month ago but they cannot solve the ploblem. Please suggest me what can i do? Do i have to claim money back and how??

First, try a system reset.  It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Similar Messages

  • After iOS7 update I cannot launch the music app. It crashes after a few seconds of white screen. What to do?

    Just updated my iPhone 5 (16g) to iOS7 and now I cannot launch the music app anymore.
    It opens and then just crashes after a few seconds of white screen.
    Also If I go to Settings General About the phone crashes all the time after just a few seconds. :-(
    Andreas

    The same for me. iPhone 4S, itunes match and upgrade to ios7 by air.
    So what we have:
    1) Music app does not launch (white screen then close)
    2) About screen crashes (I guess once it tries to calculate music space)
    3) Spotlight does not show any results (no care what I set to search in in the preferences)
    4) iTunes Match slider can not be set to Off. However, it is possible to logout from AppleID, then it off. But this does not change the situaton at all
    5) Podcast app does not launch
    I tried to reboot, to sign in with another Apple ID, to turn off itunes Match, to reset all preferences. Nothing helps.
    Things to try:
    - reset all preferences and content
    - reinstall ios7 with itunes from scratch
    - switch to windows phone

  • I cannot launch the app store from any device

    i cannot launch the app store from any device.

    Well, mind showing us a screenshot of what happens?
    Does iTS at least work?

  • Cannot launch the LR CC

    I update LR CC via adobe creative cloud of mac os x Yosemite 10.10.3. When I launch LR, the logo is shown and disappeared, nothing happen. Now I cannot launch the LR CC. How can I fix this issue?

    Have you tried logging out of your CC desktop app, then logging back in again? Quit/Restart won't work, but logging out and back in should.

  • Installation fails with "Cannot launch the Java Virtual Machine"

    I'm trying to install OAS 10.1.3.1. on Windows XPbut after copying all the files the installer starts complaining that it cannot lauch the Java Virtual Machine. Eventually, the process gets to the configuration step where it succeeds with one configuration, then fails with the next, and then finally goes into an eternal loop.
    When launching the installer it claims that my environment successfully passes all test for memory size, etc.
    Is this a known problem? Is there any way I can get more info about the reason why the JVM could not get lauched? I searched for information in the logs without success. I also tried to play around with the PATH environment variable since I saw some installation note saying that includingthe jre/bin path here could help, but it did not help.
    Could anyone, please, give me a hint of how to complete the installation successfully?

    Thanks for the hint.
    I had a look in the INI-file of my BPEL installation and this is what it said about memory:
    JRE_MEMORY_OPTIONS=" -mx256m"
    Still, if I start the BPEL server it finally comes up after issuing a lot of complaints but as soon as I request a page I get this:
    500 Internal Server Error
    OracleJSP: oracle.jsp.provider.JspCompileException:
    Fel vid kompilering:C:\product\10.1.3.1\OraBPEL_1\bpel\system\appserver\oc4j\j2ee\home\application-deployments\orabpel\console_war\persistence\_pages\\_login.java
    Could not create the Java virtual machine.
    Error occurred during initialization of VM
    Could not reserve enough space for object heapThis is strange since at the time there is >1.4 GB of virtual memory and 0.9 GB of physical memory available.
    And according to the task manager:
    Commit charge limit = 2728684
    Physical memory total = 2096496
    I am using Windows XP Professional, version 2002, service pack 2.

  • Cannot launch the JDeveloper 10.13

    I cannot execute the Jdeveloper.exe. It says that there is an error with the jdevw.exe. When I try to launch the jdevw.exe it says "cannot find a j2se sdk insalled at path: c:\jdev1013\java.exe". I installed Jdeveloper1013 under the c:\jdev1013 directory. I'm currently using Windows 2K Professional.
    Thanks,
    Marcelo

    I downloaded the studio download (verison 10.1.3., build 3673). Once I downloaded the zip file, I just unzip it in the jdev1013 directory. There is no c:/jdev1013/jdev/ directory. Is a matter of fact, the jdev.exe is located in the c:/jdev1013/. Any suggestions why this is not working? I'm trying to launch the applicaiton by executing c:/jdev1013/jdeveloper.exe. The previous version (pre-release) was working fine. I have that in c:/jdev10g/.
    Thanks,
    Marcelo

  • TS1702 cannot download the Sun newspaper app after I have paid for it.

    cannot download the Sun newspaper app after i have paid for it

    That's too bad.
    If you want/need help, try the following:
    Try basic troubleshooting as outlined in the User's Guide
    Post to the correct forum.
    Provide as many details as possible, including exact error messages

  • I have a officejet j4680 All-In-One printer. I cannot get the black ink cartridge to stay in place

    The black ink cartridge will not stay in place it keeps popping out when I place the color ink cartridge first. When I take the color cartridge out and put the black ink cartridge in it stays.
    Is there a trick to replacing the black ink cartridge?

    Make sure it is a genuine HP cartridge.  Take it out and clean the contact on the cartridge and in the printer.  Try again.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • TS1702 cannot restore the phone on the screen just show itunes logo and USB cable

    cannot restore the phone while trying to download the ios 6
    the screen shows only itunes logo and USB cable

    plug your ipod into itunes...it may not do anything plugging it into your own itunes so you may want to try plugging it into someone elses to save the trouble. I had this same problem last week plugged it into my dads ipod and it worked (:

  • Cannot launch the wizards of the Datamining Components from JDeveloper

    Hi all,
    After I create a Work space, project and select Datamining components in the JDeveloper, I get the list of wizards. I can select one of the wizards, but nothing happens, when I press OK. The "Welcome" page as specified in the tutorials do not appear.
    I am following the tutorials extracted from ODM_Tutorial.zip.
    Any help is greatly appreciated.
    Thanks
    VC

    Hi,
    What version of DM4J and JDev are you using?
    The RTM version runs on DB 9.2.0 through 9.2.0.3
    The beta version runs on DB 9.2.0.4 and up.JDeveloper - Version 9.0.4
    DM4J - Release 2 (9.2.0.4) - BETA
    So, I guess my database needs to patched to a higher version.
    Once you apply a patch beyond 9.2.0.4.0 then you need >to replace the odmapi.jar file used by DM4J with the >patched version used by the db, otherwise you will have >a version error.But, how do I get access to those patches.
    Thank you,
    VC

  • I cannot reduce the images size on my ipad2 has anyone had this problem before ?

    I have been unable to reduce all images on my Ipad2 screen. Any suggestions ? I was in an app called Bamboo Paper and the size blew up.Nothing I do works.

    Double tap your screen with 3 fingers and the image should go back to normal size.  You may also go into your settings and see if zoom is turned on.  If it is turn zoom off.

  • !!! cannot launch Acrobat XI Pro, it stops at the EULA window HELP !!!

    Hello,
    I ve just installed a trial version but I cannot launch the soft, I accept the EULA again and again and again and nothing more.... Help ....
    My OS is Windows 8.1
    Thanks
    Ann

    http://www.ehow.com/info_12217860_adobe-acrobat-pro-doesnt-remember-eula.html

  • Cannot launch Camera Raw in PSE 8

    I have PSE 8 with the Camera Raw 6.2 plug-in. The program works perfect exept that I cannot launch the Camera Raw converter. When I open a RAW-file in the editor or via the organizer, then the file just opens in the Editor mode. No raw converter... I can make a full photo-edit in the Editor. But why can't I open the Raw-converter?

    I am on vacation. I will get back to you when I am back.
    All the best,
    Lars

  • Cannot launch 10g Express Edition Home page

    I have installed Oracle 10g Express Edition yesterday,but cannot launch the home page.My browser is Firefox.Following msg is displayed,
    Unable to connect
    Firefox can't establish a connection to the server at 127.0.0.1.
    * The site could be temporarily unavailable or too busy. Try again in a few
    moments.
    * If you are unable to load any pages, check your computer's network
    connection.
    * If your computer or network is protected by a firewall or proxy, make sure
    that Firefox is permitted to access the Web.
    I have tried by disabling antivirus protection also.I am using Home Standalone PC.
    Pls. help.
    Trips

    I have this same problem after installing Oracle Database 10g Express Edition in Windows XP Professional SP2. Here is the result of lsnrctl status:
    Microsoft Windows XP [Version 5.1.2600]
    (C) Copyright 1985-2001 Microsoft Corp.
    U:\>lsnrctl status
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 31-JAN-2007 12:46
    :26
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
    ction
    Start Date 31-JAN-2007 12:21:49
    Uptime 0 days 0 hr. 24 min. 37 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Default Service XE
    Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
    dmin\listener.ora
    Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\l
    og\listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SAARONSON.corp.company.com)(PORT=1
    521)))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
    Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    U:\>
    Here is the ouput of ipconfig:
    U:\>ipconfig /all
    Windows IP Configuration
    Host Name . . . . . . . . . . . . : SAARONSON
    Primary Dns Suffix . . . . . . . : corp.company.com
    Node Type . . . . . . . . . . . . : Hybrid
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No
    DNS Suffix Search List. . . . . . : corp.company.com
    company.com
    Ethernet adapter VMware Network Adapter VMnet8:
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for
    VMnet8
    Physical Address. . . . . . . . . : 00-50-56-C0-00-08
    Dhcp Enabled. . . . . . . . . . . : No
    IP Address. . . . . . . . . . . . : 192.168.56.1
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . :
    Ethernet adapter VMware Network Adapter VMnet1:
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for
    VMnet1
    Physical Address. . . . . . . . . : 00-50-56-C0-00-01
    Dhcp Enabled. . . . . . . . . . . : No
    IP Address. . . . . . . . . . . . : 192.168.180.1
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . :
    Ethernet adapter Local Area Connection:
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Broadcom NetXtreme 57xx Gigabit Cont
    roller
    Physical Address. . . . . . . . . : 00-12-3F-57-D2-BD
    Dhcp Enabled. . . . . . . . . . . : No
    IP Address. . . . . . . . . . . . : 10.10.11.230
    Subnet Mask . . . . . . . . . . . : 255.255.254.0
    Default Gateway . . . . . . . . . : 10.10.10.3
    DNS Servers . . . . . . . . . . . : 10.10.11.246
    10.10.11.248
    U:\>
    Can you please advise what to do here?
    Thanks,
    -Seth
    P.S. I edited the domain in the ipconfig to save just a little anonymity.

  • After upgrade CUOM/SM from 2.1 to 2.3, I cannot launch CUSM.

    Dear Experts.
    I recently upgraded CUOM with SM in same server from ver 2.1 to 2.3, and changed IP address and Hostname as well.
    I am new to this Cisco management system, I have a few question and need your help.
    1.     After upgrade, do I really need to re-register 1040 Censor by uploading new image ? is it compulsory after upgrade ?
    2.     I did re-discover, but it took a lot time, is it normal behaviour to re-discover with 3 CCM, 3 GW and 1 Unity ?
    3.     I have 1000 license and this l saw error message sometime saying that my license number is not enough.
            We have more than 1000 IP Phone, so is this number of 1000 license consumed by all IP phone ?
    4.     After changing hostname and IP address, I cannot launch the CUSM from dash board, but can launch from CiscoWorks.
            I think I did all necessary step of changing IP address and hostname, but I don’t know why I cannot launch from dashboard.
           Can someone guide me how to correct this issue ?
    Kindly help me on this issue, thanks in advance.
    Jason

    Hi and welcome to Discussions,
    have you any non-Apple BootCamp Drivers installed or replaced, like for the graphics card for example ?
    If so, the uninstall them, either through the 'Software'-Panel in the Control Panel or in the case of graphics card drivers with DriverSweeper http://www.guru3d.com/category/driversweeper/
    Also, a checkdisk run http://en.wikipedia.org/wiki/CHKDSK might be helpful.
    Regards
    Stefan

Maybe you are looking for