TS1702 How do u find the developer contact details for an app?

I bought an ipad app that won't open, how do. Contact the developer for assistance?

Loverton wrote:
It's amazing to me that Apple has managed to make a process that is seemless and intuitive on an Android and make it completely mysterious. How about providing a link to the developer site along with the description of the app Apple? Instead you make me do a search for it? Pathetic.
I know nothing about the Android OS but I have used Apple products exclusively for computing and iDevices. I wholehearted agree with your statements.
IIRC, prior to iOS 6 - you could search for an app using Google, click on the link in the Google page and it would take you to an iTunes store description of the app. The full blown iTunes computer version of the app description. Now doing the same takes you to the App Store and you get some sort of half-baked, crappy, description which is incomplete, with no developer contact information. There is no workaround other than to find the developer's website via an search engine.
It gets worse with every new iOS update. Sometimes simplicity is not the best approach.

Similar Messages

HT1692 how can i get the previous contact details in iphone

how can i get the previous contact details in iphone

You don't want to maintain a reference to the last selected node, but to the last selected path. Nodes within a tree are addressed using a TreePath, with contains references to each node from the root, down to a specific node. Look at the JavaDocs of javax.swing.tree.TreePath for more info.
Also, JTree has getter/setter methods for the selectionPath.

How can I find the all path available for a MPLS VPN in SP network

How can I find the all path available for a MPLS VPN in SP network between PE to PE and CE to CE?

Hi There
If we need to find all the available paths for a remote CE from a local PE it will depend upon whether its a RR or non-RR design. If the MP-iBGP deisgn is non-RR the below vrf specific command
sh ip bgp vpnv4 vrf "vrf_name" will show us the MP-iBGP RT for that particular VPN. It will show us the next hop. Checking the route for same in the Global RT will show us the path(s) available for same ( load-balancing considered) .Then we can do a trace using the Local PE MP-iBGP loopback as source to remote PE's MP-iBGP loopback to get the physical Hops involved.
However if the design is RR-based there might be complications involved when the RR is in the forwarding path ie we have NHS being set to RR-MP-iBGP loopback and the trace using the Local PE MP-iBGP loopback as source to remote PE's MP-iBGP loopback will get us the physical Hops involved.
If we have redundant RRs being used with NHS being set then the output of sh ip bgp vpnv4 vrf "vrf_name" will show us two different available paths for the remote CE destination but just one being used.
RR-based design with no NHS being used will always to cater to single path for the remote CE detsination.
So in any case the actual path used for the remote CE connectivity would be a single unless we are using load-balancing.
Hope this helps you a bit on your requirement
Thanks & Regards
Vaibhava Varma

How do we find the previous error details in the monitor (details tab).

Hi Experts,
While loading data to a target via PSA we got an error (ex. data error), we edited in PSA and reloaded to target from PSA successfully.
Here my problem is how do we find the previous error details in the monitor (details tab).
Kindly post your comments on this......
Thanks in advance.......
Regards,
Sankar Reddy

Hi,
While updating any request from PSA, you have to delete the first erroneous request from data target and then update the PSA request. If you do not delete the erroneous request, it will not allow you to update the PSA request.
Regards,
Yogesh

How do you find the iPad phone number for cellular data?

How do you find the iPad phone number for cellular data?

I know this post was a long time ago but people still seem to be viewing it.
Quickest way:
Via the iPad on 3G, go to http://m.telstra.com. The service number is then displayed and you are given the option to recharge.

How do I find the 'auto fil' feature for Firefox?

how do I find the 'auto fil' feature for Firefox?

Hi jasmtch,
I am assuming you are talking about auto fill for forms and not password/logins, correct? If that is the case, just take a look at the Knowledge Base article [[Form autocomplete]]. This will give you all the information you need to use and manage the autocomplete feature.
Hopefully this helps!

How do I find the valid IP address for the base station?

I am trying to install he Airport Extreme but I am receiving this message: The wi-fi base station does not have a valid IP address. How do I find the valid IP address for the base station?

I have run an ethernet cable from the modem to my Mac and I do have internet connection. But when I connect that ethernet to the TC and run Airport Utility to set it up I get the error about no valid IP address.
This tells us that the modem has associated with your computer. The modem "remembers" the settings for your computer and "looks" for it when you connect the TC. It does not "see" the computer, so it does not associate with the TC.
The modem needs to be reset so that it will not remember the computer. Then it will associate with the next device that connects.
Look for a reset button on the modem, and if present, push it for a second or two. Then power off the modem and leave it off for at least 30 minutes. Power off everything else as well.
After the wait period, power up the modem and let it run for 4-5 minutes by itself. Then power up the TC and let it run a few minutes. Power up each other device one at a time about a minute apart.
Check to see if the modem is now associating with the TC so that the TC will get a valid IP address.

Need to find the dependent object details for an object.

Hi,
Is there any query to find the dependent object details for any object. Like if mview is built on a table, then i should be able to find the table name with out checking code of the mview. Thanks in-advance for your support. similar way for view and functions or procedures etc...
Regards
DBA.

Hi all,
Thanks a lot for your inputs. seems i have not given full details in my post. I need to have a SQL Query to find the dependent object details not DDL.
if i give a metriealized view name, i should get the base table names directly not DDLs...
if i give index name i should get its corresponding table name(off course i got this already)...
if i give a function name, i should get all the tables which are being in the function...etc...
i am looking for a script which will cover all the aspects.....i hope i have given now enough information for this....
Regards
DBA.

TS1702 How will i find the softwares in my iphone 4 which i have installed???

How will i find the softwares in my iphone 4 which i have installed???

Using Spotlight to search:
http://help.apple.com/iphone/7/#/iph3c511548

HT4061 How do I find the Device IMEI number for an iPad Mini?

How do I find the Device IMEI number on an iPAD Mini? It was not on the packaging or the back of the device.

Settings > General > About

How do I find the dc load line for a BJT on multisim 11

Im trying to find the dc load line for a BJT on multisim 11.

Thanks for reply. Would please tell me the procedure to get output jfet characteristic curve by changing d-s voltage at different g-s voltage to drain current? I attached my document. It's better if you send me a sample simulation file if possilble. actually i will try for other jfet model once i know how to simulate it. it would be great help. thank you in advance.
Attachments:
expecting waveform.JPG ‏32 KB
char.JPG ‏345 KB

TS1702 How do I change the Apple ID in an installed APP? I have changed the apple ID in all the other apps due to security reasons. All changes were effective except the APPS ID.Where do I go to change the Apple ID?

How do I change the Apple ID in an installed APP? I have changed the apple ID in all the other apps due to security reasons. All changes were effective except the APPS ID.Where do I go to change the Apple ID for the APPS store? Thanks in advance.

You do not. Apps and any content purchased from the iTunes store are eternally tied to the Apple ID they were purchased with.

How can I find the developer of my app?

I have an app, "J. H. Leavy & Co.", that was developed and published by Bacchus Lifestyle.
I have lost their contact details and need to make some changes to the app.
How can I get in contact with them?
If they have gone out of business, how can I get my app changed?
Thanks.

Thanks ChrisJ4203.
The developer did everything including sending to the App store.
I can see the app in the app store, and the developer is listed there as Bacchus Lifestyle and the seller is a personal name. However, I am not able to find them.
When you click on the "App Support" link to go to their web site, the site comes up with a 404 error.
Can't see them in google either.

TS1702 How do I find the store from my country to update apps ?

I have apps that I can no longer update, beacuase I do not know how to find the app store of my country. Can someone help me please?

You'll probably have to contacts iTunes store support for assistance: http://www.apple.com/emea/support/itunes/contact.html. This is for the U.S. iTunes store but they may be able to help you with your issue anyway.

How do I find the most recent version of ipad apps?

I have duplicate app icons on my ipad2. How do I find out which is the most recent so I can delete the older version?

Unless you have a Free and paid version of an App that happen to be two distinct Apps in the store, there's really no way to have 2 versions of the same App.
When most apps update they replace the existing one automatically.
Though I do know of a few that have released completely different apps in an update instead of updating the existing one. When that happens usually the old version no longer works, and prompts you to update to the newer one. So all you can do is remove it.

TS1702 How do u find the developer contact details for an app?

Similar Messages

Maybe you are looking for