TS1702 I have a problem with an app called GSN casino. It has appeared on my app screen and I can't get rid of it.

There is no way that I can see to get this supid thing off my app screen. I can't update apps I can't add new apps I can't do anything and I **** sure don't want this app.

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

Similar Messages

  • On certain pages, a big circle with an arrow inside it takes the foreground in the bottom left corner, and I can't get rid of it.

    This image is something new on my screen, probably since the last Fx update or so.
    I think this big-circle-with-an-arrow-inside may be a sign indicating that I need to download something, or that something is available for download. I see it on sites featuring various media, such as on some of Amazon's digital music pages and also on some of IMDb's pages.
    Further regarding any downloads, I don't know if this circle refers to a plugin, or a media file, or if, in fact, either.
    I have no idea what the circle with an arrow is trying to tell me, nor do I know how to get rid of it. It takes over the forefround of the corners where it resides, rendering any links beneath it inoperable. At the very least, I would just like to make it go away.
    Thanks for any help you may offer :-)

    Thanks for your interest in my problem. I'm sending along a screenshot.
    FYI, when I tapped on the arrow, a new tab opened at the following location:
    chrome://fvd.single/content/fennec_streams_list.html?url=https%3A%2F%2Fwww.amazon.com%2Fgp%2Fdmusic%2Fcloudplayer%2Fplayer%3Fie%3DUTF8%26ref_%3Dnav_youraccount_cldplyr%23searchSongs%2FsearchTerm%3Dgood%2Bvibrations
    The page at this address is empty (all white) except for a small blue bar in the upper right corner that says "Download 5.3 1MB."
    Again, my thanks.

  • I have an Icloud backup annopuncement on the screen and I can't get rid of it or use any of the buttons

    I have a message on my Ipad that says there hasn't been a back up and when you puch ok to get rid of it, nothing happens, and you can't use any other buttons either?

    Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.

  • Bearshare was downloaded to our home computer. Now it has taken over my Firefox homepage and I can't get rid of it. I have tried changing the homepage via Tools, Options. Didnt work. Deleted the Bearshare app and cookies and web history. Still didnt work.

    Tried resetting default setting via Firefox Safemode. Didnt work. Any suggestions.?
    My situation is 2 home computers (Windows XP) sharing 1 modem, but have their own apps. Mozilla on the other computer is fine. Just this one which Bearshare was downloaded to.
    It took over the Homepage in IE too, but I was able to change it using Internet Options.
    The message which comes up when I try to change the Homepage is "An attempt to change the homepage has been blocked"
    Tks

    You only get an alert stating "An attempt to change the homepage has been blocked" if you have security software or an extension that is protecting against such a change. Firefox doesn't do that by itself. If starting in [[Safe mode]] didn't help then that only leaves security software, so you need to look to see how you can allow a home page change.

  • When I go into iTunes on my Mac is recently takes over the entire screen and I can not get rid of it.  Is there a setting I can change to have it work the old way?

    When I go into iTunes (the latest update) now, it takes over the entire screen is difficult to remove.  Is there a setting I can change in it to have it behave the old way?

    I presume you are runnning iTunes on either an OS X 10.7 or OS X 10.8 system. Move the cursor to the very top of the screen so that the menu bar appears, then click the blue box with the arrows at the very right corner of the menu bar, or press Shift-Command-F. That will switch iTunes back to a normal window, which it should then remember for future launches.
    Regards.

  • All of a sudden I have all my bookmarks displayed on the left of the screen and I can't get rid of them. How do I get rid of this box?

    All of a sudden I have a box on the left of my screen with all my bookmarks in it. I can't find a way to disable this, and I would like to.

    You can toggle the Bookmarks Sidebar on/off with Ctrl+B
    * View > sidebar > Bookmarks
    Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily.

  • In downloading an application, an icon called "Speech Feedback" has popped up on my desktop. and I can't get rid of it. It will not be trashed, and I can't find the app. among my applications.

    After downloading an application, an icon called "Speech Feedback" has appeared on my desktop.  I do not want it and can not get rid of it. Please help.

    Go  to System Preferences and click the Speech icon . When the next screen opens look in the upper portion of that screen for "Speakable Items". Change the setting from "On" to "Off". Now the icon of the desktop should disappear. If not, restart your MacBook Pro. 

  • TS1646 i have a problem with my itunes accounts. When i want to buy in-app features i got an error that;

    "i have a problem with my itunes accounts. When i want to buy in-app features i got an error that;
    "Please contact with iTunes support for completing this process"
    i checked my device settings and i tried my account with another ios device but result not changed. i still get same error. my credit card address info and my account address info same with each other. i tried my other credit cards but i got same error.
    Please check my account details for solving this issue.

    These are user-to-user forums, you are not talking to Apple here.
    You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, the try selecting Purchases, Billing & Redemption

  • I have a problem with my iPhone 4s.  An Apple rep looked at the phone today and determined the phone will have to be replaced.  I am trying to back up my data on the phone to iTunes but I cannot get the phone to power up.

    I have a problem with my iPhone 4s.  An Apple rep looked at the phone tonight and determined I will need a new phone.  I am now trying to back up my data to iTunes but I cannot get the phone to turn on.  I have it plugged into my computer monitor but it just slowly flashes the Apple symbol. Any ideas on how I can get it to power up for the backup?

    Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

  • I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...

    I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...what should I do?

    Hi Arika,
    The drivers that you need to install to make your executable work depends on what your executable is doing. To get started, you need to have the LabVIEW Run-Time Engine installed on your target machine (the Win2000 machine you are planning to use) in order to run your executable. Next, you need to determine what drivers your executable uses, if any. For example, if you are using GPIB instrument control, you will need to install the NI-488 drivers on your target machine. If you are performing data acquisition, you will need to install NI-DAQ drivers. If you are doing image acquistion, you will need to install NI-IMAQ drivers.
    All these drivers are available for downloading on ni.com. To get the drivers, go to ht
    tp://www.ni.com/support , click on the link that takes you to Drivers and Updates (under Option 3), and click on the links to get to the driver(s) you need. For example, if you need the LabVIEW 5.1.1 Run-Time engine, click on the All Drivers and Updates by Application link on the main page (http://www.ni.com/softlib.nsf/). Then click on the LabVIEW link, Windows 2000, Run Time Engine, and then you will see the link to get to the page to download the LabVIEW 5.1.1 Run-Time Engine.
    I hope this information helps.
    Best Regards,
    Wilbur Shen
    National Instruments

  • I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

    Hi
    I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

    Do the following:
    Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
    Let the printer manage colors, not PSE
    Calibrate the monitor

  • I have a problem with the keyboard on my MacBook. The letters are typing as symbols and the delete and return/enter buttons do not work. Does anybody know how to fix this?

    I have a problem with the keyboard on my MacBook. The letters are typing as symbols and the delete and return/enter buttons do not work. Does anybody know how to fix this?

    Hey skyshade13,
    Thanks for the question. The following article outlines how to restore a previous iTunes library should there be no content after updating. While the article does not speak specifically to your symptoms, attempting the steps by utilizing the "Previous iTunes Libraries" folder may resolve your issue.
    No content shows up in iTunes after updating
    http://support.apple.com/kb/TS1967
    For further information see the following information:
    OS X Lion: iTunes opens to "created by a newer version" alert
    http://support.apple.com/kb/TS3918
    iTunes: How to re-create your iTunes library and playlists
    http://support.apple.com/kb/HT1451
    Thanks,
    Matt M.

  • Hello I would like to ask I have a problem with the Iphone 3gs 32 g I don install the ios 6.0 and now I can not activate the sim card .... I do not even know what's centenary advise me thank you

    Hello
    I would like to ask I have a problem with the Iphone 3gs 32 g
    I don install the ios 6.0 and now I can not activate the sim card .... I do not even know what's centenary advise me thank you

    Did you already try the suggestions from this article?
    Symptoms
    In certain situations, iPhone may present one of the following symptoms:
    "Invalid SIM" or "No SIM Card installed" alert appears intermittently.
    Status bar displays "No Service", "No SIM" or "Searching" in a location with good network coverage.
    Resolution
    If you encounter any of the above symptoms on your iPhone, try these steps to attempt to resolve the issue:
    Update your iPhone to the latest version of iOS.
    Toggle Airplane mode On and Off.
    Try turning iPhone off and then on again.
    Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
    Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
    Restore the iPhone.
    copied from iPhone: Troubleshooting No Service or No SIM

  • I have problem with my iphone 5 when I talk my ear allways tuch the screen and get it on no sound, the screen are not lock, is that possible

    I have problem with my Iphone 5, when I talk my ear allways tuch the screen and get it on no sound, the screen are not lock, is ti possible to lock the screen when incomming an outgoing call going on

    Hello Mogulman46,
    So what that means is when you have Do Not Disturb turned on, you may have an alert depending on the setting and how you are using your iPhone. So if it is set to Always, then that means that no matter what, your iPhone will not be notified. If it set to Only while the iPhone is locked, then that means that you will not get notification when your iPhone is locked but you will get notifications if your iPhone is being used. Also keep in mind the settings All Calls From can be set to certain contacts like Favorites, Everyone or no one. If you are using Do Not Disturb and you do not need it, then turn it off. 
    Use Do Not Disturb on your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht5463
    Regards,
    -Norm G. 

  • HT1338 I have a problem with the aspect ratio of photos as they appear on iPhoto.  They are not correct.  On the original photo people were fat and squat.  I tried rotating and they became long and narrow.  Neither correct.

    I have a problem with the aspect ratio of photos as they appear on iPhoto.  They are not correct.  On the original photo people were fat and squat.  I tried rotating and they became long and narrow.  Neither correct.  Any suggestions?

    Sounds more like a problem with your Display Resolution than iPhoto.
    Go to: Apple / System Preferences / Displays and in the Resolutions list select,
    1280 x 800 if you have a 13" MacBook Pro
    1400 x 900 if you have a 15" MacBook Pro
    1920 x 1200 if you have a 17" Macbook Pro

Maybe you are looking for

  • Importing modified Bug WIT does not refresh the template in TFS 2013 for the project created using Scrum Template.

    Hi, We have a TeamProjectA created in a collection using ScrumTemplate 2013.4. I have added a new State 'Duplicate' in the Bug WIT and modified the workflow. Also the ProcessConfiguration file is modified to match the metastate and imported using the

  • How to use BAPI_QUOTATION_CHANGEBOS  bapi.

    Hi All, I have created quotation using transaction VA21, I want to use bapi BAPI_QUOTATION_CHANGEBOS to change the version & text of header data in the workflow. Can anyone please suggest me the necessary parameter to pass into this bapi to get the d

  • NameError while registering MDS repository

    Hello Experts! I have a problem with registering MDS repository through WLST. I have written Python script that should register MDS repository but when I try to run it, it says "[Deployment Script]: Unexpected error: exceptions.NameError" Here is my

  • Why wls7 deprecate the excellent function of wls6

    hello i am a programmer,i usually use the jbuilder+wls6 as my development environment,when i debug my program,i used to follow the following path: "web applications->Configure a new Web Application..." within the next page,i give the "war(or jar)" fi

  • What is infotype??

    Hi All,       I am new to ESS/MSS .. i am familiar with webdynpro .i have to customize some standard ESS webdynpro applications .. Can some one tell me what all i need to know .    Firstly can some one tell me what exactly a infotype is ?? and what i