TS1702 I have been experiencing lots of troubles since I downloaded iOS 6.

My iPod Touch 4G (32GB) used to work wonderfully.
However, since I downloaded the new iOS, it keeps shutting down some apps.
The most frustrating issue is that the Magellan RoadMate app (GPS) does not correctly indicate the street where I am driving.
I use the Magellan app with Bad-Elf, and I did not have issues before the iOS upgrade.
I tried everything, including restarting,  restoring, etc, but nothing worked.
Could it be possible to downgrade the iOS to the former version? Or, is there any solution?

Downgrading the iOS is not supported by Apple.
These may help/provide additional information.
TS1702 magellan External gps not...: Apple Support Communities
after updating to iOS 6 gps signals are...: Apple Support Communities

Similar Messages

  • TS1702 I have iPad 3rd addition not sure if can download iOS 6 to this iPad. Currently it has iOS 5.1.1, can it be upgraded?

    I currently iPad which is 3rd generation, I have iOS5.1.1 on it now, I don't know if I can put iOS6 upgrade on it.

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 4: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • Hi! I have been experiencing trouble my mac computer, it spits out CD/DVD's and there is no camera connection

    Hi! I have been experiencing trouble my mac computer, it spits out CD/DVD's and there is no camera connection

    My mid-2007 iMac's internal optical drive went on the fritz a few weeks ago. Symptoms were a little different (it recognized every disk, CD or DVD, as blank whether they were blank or not). Reason and solution are the same: It's a hardware problem and your choices are to get the internal replaced or repaired, or get an external FireWire or USB drive.
    If you're still covered by AppleCare, your internal drive will be repaired/replaced for you at no cost. Just bring it in to your nearest Apple Store after calling for a repair appointment.
    If you're not still covered by AppleCare, an internal replacement is more expensive than it's worth. I got a very inexpensive USB CD/DVD reader - less than $20, since I don't need the ability to burn very often and when I do there are plenty of other Macs around here to do the burning. If you feel confident in your ability to muck about with the cramped insides of your Mini, a replacement internal can be had for under $100.

  • Since upgrading iMac to osx lion I have been experiencing problems in mail, it spontaneously stops receiving and tells me it can't find the pop server and also the biggest problem is that when I send with an attachment the recipient doesn't receive it.

    Since upgrading iMac to osx lion I have been experiencing problems in mail, it spontaneously stops receiving and tells me it can't find the pop server and also the biggest problem is that when I send with an attachment the recipient doesn't receive it.
    I have to restart mail most times before it starts recieving or recognizes the pop server.
    As I said a lot of recipients do not recieve my mails when there is an attachment or when I reply to their email.

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • I have been a customer with Verizon, since 1996. Recently, my husband has been added onto my account. We have both been experience drop calls. My husband contact Tech support for over 2 weeks. We were pretty upset to be paying a lot of money for a service

    I have been a customer with Verizon, since 1996. Recently, my husband has been added onto my account. We have both been experience drop calls. My husband contact Tech support for over 2 weeks. We were pretty upset to be paying a lot of money for a service that didn't work. Verizon advised us that would upgrade both of our phones (to see if that solved the problem). Ok...this is where Verizon has forgotten customer service rules. He order 2 phone...one for himself, one for me. 1st the wrong address on the package..Fedex couldn't deliver...2nd...missing condo number Fedex couldn't deliver again...(2nd call to Verizon)...3rd package was finally deliver with 1 phone...missing my phone. Contacted verizon rep...reorder my phone again..but sorry we cannot give the same price as quoted on 21April...even though...its our mistake...Ok...Ok..what a surprise..but we can do this...after 65 minutes...found a price that was a little bit more...fine...just order the phone....I reordered phone on 28April...on the April 29...no email..so I can Verizon for the 4times in a few days..sorry your order was delay due to our Fraud dept. OK...talked to fraud dept...ok..account is good..will release phone and ship. OK...Next day, no email with deliver confimation. Contact Verizon 5 times now...sorry..your order was cancelled...YES...cancelled again...2nd time now...but we can reorder...OK...sorry but we cannot honor that price that was quoted..really...agent messed up...again...but we can do this for you....I don't understand...your mistake...ALL the times...
    Strange ...how my order gets cancelled twice by Verizon's mistake....yet you cannot honor prices that your agents quoted!!!
    I didn't reorder the phone....I cannot in good faith same with a company that does not stand behind their own mistakes...and worse...they make the poor customer pay for it...
    I will not be renewing my contact...its time to Cricket Wirless...which my sister-in-law loves for half the cost....

    I hope that you aren't complaining about dropped calls INSIDE your condo because no amount of switching or upgrading devices will solve that.
    VZW will not guarantee service inside of any structure. There are just too many factors. If the problem is inside then you might want to look at one of the following:
    1.) Network Extender (may cause issues for others in a condo or apartment style setting)
    2.) A Google Voice Number (Free with a Gmail email address), downloading Google Hangouts Dialer and forwarding your calls to the GVN so that you can make and receive calls over Wi-Fi.

  • Hi i am have had a lot of trouble emptying my trash. when i go to put something in there it asks from my password and the item goes off the screen, but this does not clear any space on the hard drive.

    Hi i am have had a lot of trouble emptying my trash. when i go to put something in there it asks from my password and the item goes off the screen, but this does not clear any space on the hard drive.

    1. Triple-click the line below to select it:
    ~/.Trash
    2. Right-click or control-click the highlighted line and select
    Services ▹ Show Info
    from the contextual menu. An Info dialog should open.
    3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
    4. In the General section, uncheck the box marked Locked if it's checked.
    5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
    6. Close the Info window and test.

  • HT204368 I have a Voyager Plantronics Pro bluetooth device and have been experiencing problems since the most recent ios upgrade. Is there a way to restore the previous os version?

    I have a Voyager Plantronics Pro bluetooth device and have been experiencing problems since the most recent ios upgrade (6.0.1). Is there a way to restore the previous os version?

    I have a Voyager Plantronics Pro bluetooth device and have been experiencing problems since the most recent ios upgrade (6.0.1). Is there a way to restore the previous os version?

  • I  have been having nothing but trouble with OS 10.6.8.  Many of my appliatins will not work..  HOw can I revert back to a previous version of OS x?

    I  have been having nothing but trouble with OS 10.6.8.  Many of my applications will not work..  HOw can I revert back to a previous version of OS x?

    Before you revert anything try this:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Next time don't post something like "nothing but trouble." Tell us exactly what the trouble is and provide any additional information such as error messages.

  • In the past few weeks I have been experiencing  popup audios.  They are annoying and I would like to block them. I am using Firefox as my browser. Any ideas?

    In the past few weeks I have been experiencing  popup audios.  They are annoying and I would like to block them. I am using Firefox as my browser. Any ideas?

    Hi Lowell,
    I don't know if you have the popup blocker turned on (nor if it works for audio), but if not, try it: Firefox menu > Preferences > Content > Block Popups.

  • I have been experiencing periodic loss of touch screen response with my iPhone 6 when in landscape mode. Flipping to portrait then back to landscape usually corrects it, but at times I need to close and reenter the app.

    I have been experiencing periodic loss of touch screen response with my iPhone 6 when in landscape mode. Flipping to portrait then back to landscape usually corrects it, but at times I need to close and reenter the app.

    Hi McGannahanSkjellyfetti,
    If you are experiencing difficulties with touchscreen response on your iPhone I would suggest that you troubleshoot using the steps in this article - 
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • I have been experiencing excessively slow upload speeds.  like, what the malfunction.  does someone have an explanation for such?

    when uploading a movie either to theater or to share, i have been experiencing excessively slow upload speeds, as well as varying upload time. 
    -excessively slow speeds, such as a 1-minute video requiring more than 1-hour 44-minutes to upload.
    -varying upload speeds, as in the status circle will report an upload time of 1-hour, and moments later report an upload time of 4-hours.
    also, when selecting "iMovie" as an application, it requires an excessive amount of time simply to load and appear on the monitor.

    Hi Julio,
    We have removed the class-map for IPS and have done a clear local-host.
    We have also changed the duplex (from Auto to full) and speed (from Auto to 100Mbps) on the outside interface.
    it seemed the duplex we 've got was half when it was configured as Auto. We've asked our ISP to change in their side to full, but we've got half instead.
    We did an upload test after those actions, the speed we got is 300KBps, it should be 8Mbps (download and upload).
    when we send many upload at a same time, we can see from our monitoring tool that the bandwidth used is 8Mb.
    We wonder we cannot get high speed when uploading a single file, the max speed is 300KBps.
    Please, find below the output of
    sh int | inc error
            0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
            0 output errors, 0 collisions, 1 interface resets
            0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
            0 output errors, 0 collisions, 1 interface resets
            0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
            0 output errors, 0 collisions, 1 interface resets
            0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
            0 output errors, 2710 collisions, 3 interface resets
            0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
            0 output errors, 0 collisions, 0 interface resets
    the 2710 collisions is on the outside interface (i think it was before changing duplex)
    sh cpu
    CPU utilization for 5 seconds = 2%; 1 minute: 1%; 5 minutes: 1%
    when we plug a computer directly to the ISP device (IDU), the speed is high (about 650KBps).
    what would you suggest us to do? (sure, we will rate all the helpful posts )

  • First question - I have Acrobat 9 on my desktop and the license seems to have been messed up.  I tried to download and fis but I asked me for a disk.  I don't have any idea where the "disk" is.  Can I get the license update without that disk?

    First question - I have Acrobat 9 on my desktop and the license seems to have been messed up.  I tried to download and fis but I asked me for a disk.  I don't have any idea where the "disk" is.  Can I get the license update without that disk?
    Second question - In anticipation of not being able to do that, I bought (at University bookstore) Acrobat XI Pro - do I need to uninstall the 9.0 Pro version before I try to install the XI version?

    If you still have your serial number for Acrobat Pro there is a link to the installer here:  Download Acrobat products | 9, 8

  • "The file [name of file] may have been changed by another user since you last saved it." Issue affects both network and local files.

    When a certain user saves a file in Excel 2010, she gets a message: "The file <name of file> may have been changed by another user since you last saved it."  She can choose to save as another file or overwrite with her changes. 
    This just started happening a week or so ago.  She was concerned that someone else was accessing her files, but we did several tests that opened, made a change and saved in a matter of seconds, and she still gets the message.  It happens on
    most files, but not all – both network and local.
    We already tried the QFE_Saskatchewan registry fix.  I also checked the file server for Services for Macintosh.

    You may be confused by the error in Excel saying “another user”. Actually Excel cannot tell who (the real human) is editing the file. Based on my research the No.1 possibility of the error is KB2626998.
    2626998  Connection to a network document is lost in the 2007 Office system or in Office 2010 after the computer resumes from standby
    http://support.microsoft.com/kb/2626998
    For Excel 2010, follow these steps:
    a.  Click Start , click Run , type regedit in the Open box, and then click OK .
    b.  Locate and then select the following registry subkey: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Excel\Options
    c.  On the Edit menu, point to New , and then click Dword Value .
    d.  Type NetworkAvailableTimeInSeconds , and then press Enter.
    e.  Right-click NetworkAvailableTimeInSeconds , and then click Modify .
    f.  In the Value data box, click Decimal , type a number value, and then click OK .
    Note This registry subkey sets the time, in seconds, that Excel waits for the network to resume. For example, if you type 15 for the number value, Excel waits 15 seconds for the network to resume. You might have to do some tests in your own environment to
    determine an appropriate value. You may have to try multiple numbers.
    g.  Locate and then select the following registry subkey.
    HKEY_CURRENT_USER\Software\Microsoft\office\14.0\common\Internet
    h.  Repeat step 2C through step 2F again. Reuse the same value that you used previously.
    i.  Exit Registry Editor.
    Feel free to post back. Thanks.
    Cheers,
    Tony Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please contact
    [email protected]

  • I cannot access my Itunes following latest update.Solution suggests take it off.If I do I have been told I will lose all my downloads.Is that correct.Is there a way around it?

    Couldnt get onto Itunes following latest update.Help is suggesting delete it,but I have been told this will lose all my downloads(not just from Itunes).Is that correct.How can I get around this?(I am no techno buff so simple answers please. Subsequently resored system from before update but hasnt worked.Still no access to ITunes

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates
    Under normal circumstances, an uninstall/reinstall doesn't touch your content. (That being said, it's still always a good idea to maintain a current backup at all times in case of disasters of any sort.)

  • HT1338 I have been an avid Pandora user since I purchased my mac. now all of a sudden I cannot get It to work. I know it is a mac issue because I am listening to it on my pc right next to my mac . Help

    I have been an avid Pandora user since I purchased my nac today I downloaded some up dates in Iphoto and now I cannot get pandora to work. I know it must be the mac because I can still get it to load on my pc.. Help

    Have the pics allways been used off the external drive?
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.
    Is Spotlight indexing that drive, or is it used by Time Machine?

Maybe you are looking for

  • Technical Glitches in brand new Iphone 4S

    Hi I had bought iphone 4S in July'2014 from Amazon.com. Earlier I was using iphone 3GS which I used for 3 years without any problems. But since I had bought 4S I have been facing so many technical glitches in the phone. Few of them I want to list on

  • I upgraded to iOS 7, now trying to restore from a back up, and it always bring me back to the factory reset, everytime I try putting the backup. Help?

    So, I made a backup of my device (iPad 2). It was on iOS 4.3.2. I updated to iOS 7. Now, I'm at the default opening screen. I have to choose language, country, then connect to WiFi. After that, it asks me if I want to start new or restore from a back

  • Adobe Reader Updqte Error 1500 Win 7 64-bit

    PC is running on Windows 7 Ultimate 64-bit. While on Adobe Reader 9.3.1, I received a prompt that indicated an update was available. The update failed, error 1500.  I rebooted and tried again.  Same error.  I rebooted a second time into Safe Mode wit

  • Problem with new step in acc seq

    hi all, i have created a new step in an existing zcc sqe. - dev/customer  (at the top of the seq) and std table 007 (no release status). the acc seq now is acc no.     table     des 5     7     Division/Customer 10     952     Sales org./Plant/SalesD

  • Livetype in imovie08

    I am using livetype to make titles in imovie 08, which works fine. When the movie is tranfered to IDVD the livetype image does not show up. What is wrong?