TS1702 I own a jigsaw puzzle that was made for iPad. It keeps freezing up on me?.

I own a jigsaw puzzle made for iPad and it keeps freezing up on me. Why

Have you tried a Rese?t [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!

Similar Messages

Can I play a game that was made for the iPhone or iPad on my computer?

I downloaded a game from the itunes and thought i could play it on my mac. It was Words With Friends. But I guess i have to the the game center to play it. Is that right? Anyway around it?

Unfortunately, no. The apps that are published to the App Store are specifically designed to work only on iOS devices (iPhone, iPad, and iPod Touch).
If you want something like the App Store for your Mac, then you can check out the Mac App Store.

Report Generation Toolkit producing error -2147417842, "The application called an interface that was marshalled for a different thread."

Hi everybody,
I've got an application that logs data to an Excel spreadsheet using the Report Generation Toolkit. My VI's have worked fine in the past using Excel XP, but since I've upgraded to Excel 2007, I am getting COM errors like this one:
"Error -2147417842 occurred at The application called an interface that was marshalled for a different thread. in Excel_Insert_Text.vi" That is the exact wording, even with the weird punctuation and capitalization.
The first occurrence of the error is not determinate. Sometimes, up to 10 logging sessions, involving a new .xls file, can occur before this error pops up. Once this error occurs, I must quit LabVIEW to resolve it. If I try to do anything with Excel, I always get this error, although sometimes it comes out of different source VIs. Excel_Open.vi is another.
These logging VIs have worked just fine until upgrading to Excel 2007. I checked, and I was using a really old version of the Report Generation Toolkit, v1.0.1. I read the documentation and had a big sigh of relief when I realized I needed to upgraded to v1.1.2 to get Excel 2007 support. However, even after upgrading, I'm still getting the same errors. I'm using LabVIEW 8.0.1, and I'm also building these VIs into an application. The error occurs both in the LabVIEW IDE and in the built application. Does anybody out there have any idea what I can do to fix this? I googled a little, and discovered this is a COM error, but I can't find any references to the Report Generation Toolkit specifically.
Thanks,
Phil
Solved!
Go to Solution.

Hi Christian,
I do not see that exact option listed, do you mean "user interface"? I recognize the "Run in UI Thread" option, it's on the Call Library Function Node.
I checked, and my top-level VI has "same as caller" set, and I believe all my VIs are set to "same as caller". Are you suggesting I change my top-level VI preferred execution environment to "user interface", or just the logging sub-VIs that use the Report Generation Toolkit?
Thanks,
Phil
Attachments:
VI_properties.png ‏15 KB

How can I open a keynote file that was made in Keynote Beta and downloaded from the web?

I have Keynote version 5.3
I want to edit a Keynote presentation made originally in Keynote Beta on the web.
When I download it in .key it wont let me edit the file because it says I need a newer version of Keynote.
When I try to download Keynote 6.0.1 I'm told I can't because I need a newer operating system!! I currently have 10.7.5 and there are no new updates.
Can I NOT open a keynote file that was made in Keynote Beta??!

Dude, the FCP-X forum is located here: https://discussions.apple.com/community/professional_applications/final_cut_pro_ x?view=discussions
This is the Final Cut Studio forum. There are no similarities between the two.
-DH

I just did a software update that was apparently for iPhoto. When I try to open iPhoto it stops at "step 5" and will not go further. what do I do?

I just did a software update that was apparently for iPhoto. When I try to open iPhoto it stops at "step 5" and will not go further. what do I do?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

So I just updated to the newest update that was available for safari and iTunes but now it won't let me go on the Internet using safari and it also won't let me sync my songs ,,,,,it takes forever to back up my iPad AND my iPod so what can I do ?

So I just updated to the newest update that was available for safari and iTunes but now it won't let me go on the Internet using safari and it also won't let me sync my songs ,,,,,(it takes forever to backup my iPad AND my iPod) so what can I do ?

If you're on windows try the following:
This worked for me an hour ago and has allowed me to sync ok. Still haven't tried downloading the new version 5 to the phone yet as I'm still backing up photos etc just in case.
1. Quit itunes
2. Start an elevated command prompt (Start Menu -> All Programs -> Accessories -> right click Command Prompt -> Run as Administrator)
3. Once in the command prompt type the following 3 words starting where your cursor is flashing: netsh winsock reset
4. press ENTER
5. Reboot your machine
6. Restart itunes & connect device to sync
7. Good luck

After updating my ipad, it won't come back on, it has the itunes plug in on screen, what is the best way to restore everything that was on my ipad?

after doing an apple update, my ipad will not respond, all i get is the itunes plug in. I want to make sure to restore everthing that was on my ipad?

The iTunes and plug icons are telling you that the iPad is in recovery mode. Connect the iPad to the computer you normally sync with and restore the iPad. You can use your most recent backup to restore your content. If you haven't backed up your iPad then your content is lost.

HP Pavilion dv6-6c29wm will not restore from disc that was made with HP recovery Manager

My HP Pavilion dv6-6c29wm will not restore from disc that was made with HP recovery Manager
Running Windows 7 64-bit on 650gb drive.
Error: "The system media does not support this computer. You are not able to restore this system with the media."
I'm about to order the recovery discs from HP and with any luck be able to bring this laptop back to factory conditionn with all the correct partitions and sizes after I format the hard drive.
This question was solved.
View Solution.

Yes our recovery disks will return your unit to the factory state. All the software that came with the unit will be reinstalled. Whatever you added you will have to reinstall.
I work for HP.
Please click the White Kudos star on the left to say thanks.
Please mark Accept As Solution if this resolves your issue.

While intending to perform a clean install of Mountain Lion while continuing with old apps and files, is it a waste to restore a backup that was made while running Mountain Lion as an UPgrade from Lion?

While intending to perform a clean install of Mountain Lion while continuing with old apps and files, is it a waste to restore a backup that was made while running Mountain Lion as an UPgrade from Lion?
Originally I was running Mountain Lion as an UPgrade from Lion. I created a backup in Time Machine, performed a clean install of Mountain Lion, then I proceeded to use Time Machine to restore the back up.
When thinking about the essence of a back up restore, it occurrs to me that for all I know, I may have just wated my time IF Time Machine also restores all the old unneeded files that remain from Lion after an upgrade.
Since the backup was made while running Mountain Lion as an upgrade from Lion, did restoring this backup defeat the purpose of a clean install by reinstalling old Lion files?
If so, how can I re-do the last portion of the process so that I get all my home-folder files and apps back without the full bulk of old Lion files? Migration assistant I'm guessing?
-Chris

Hello John!
Thank you for your response which solved my problem. For other users who may stumble upon this, I'll clear up the confusion and share how I solved the problem with your help; When looking for answers to my computer problems, finding unresolved questions where person B offers a solution and person A never comes back and says "That worked, thank you.", it demonstrates a "k-thnx-bye" user mentality that leaves others with the same problem lost. Without further ado:
It is not clear what you did because the meaning of "clean install" is vague. You can erase a volume and install an OS which leaves none of its previous content intact,
This is what I did: I erased the volume leaving no previous content intact, while then installing OS X Mountain Lion.
or you can upgrade an existing OS (or reinstall the same one) which does not alter your user - installed files.
An upgrade to Mountain Lion from Lion is what I started with initially before erasing anything. This was undesirable. Since this can cause Macs to run slower (especially whereas I'm using a mid-2011 Mac Mini), my goal was to go from operating within an upgrade to Mountain Lion, to operating within an installation of Montain Lion that was not preceded by any other oprating system.
Hence a "clean install of Mountain Lion while continuing with old apps and files" is confusing.
Well put and understood. What I should have said was:
1.Erase the volume
2.Install Mountain Lion clean
3.Confirm that Mountain Lion is functioning properly
4.Proceed to use either Time Machine or Migration Assistant to Import/Migrate/Copy over only two things; My old apps (That had been stored originally in the designated Applications folder) and all files and folders originally stored in the home folder under users.
If you restore from a Time Machine backup then all modifications that occurred subsequent to that backup become erased. It renders moot any OS X upgrade performed subsequent to that backup.
That makes sense and is just as I later suspected.
If so, how can I re-do the last portion of the process so that I get all my home-folder files and apps back without the full bulk of old Lion files? Migration assistant I'm guessing?
Yes.
This is what I did and everything works perfectly. Thank you so much once again!
-Chris

I have an old file that was made by macromedia flash,but I can't run this file in my Windows 7 64-bit ,while I can run it in Windows XP 32-bit

I have an old file that was made by macromedia flash,but I can't run this file in my Windows 7 64-bit ,while I can run it in Windows XP 32-bit

Hi momi macrom,
Have moved your post to the Flash forum. Experts here are better placed to help you.
Thanks,
Preran

I asked this question before but I can't find it now. Anyway, I'm trying to import a DVD video that was made on a MAC and use it on a new iMovie project.

I asked this question before but I can't find it now. Anyway, I'm trying to import a DVD video that was made on a MAC and use it on a new iMovie project.
How do I do the importing.

If the video is already on a DVD:
You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it. See this:
http://support.apple.com/kb/HT3381
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

HT201342 My iTunes account is under my @yahoo email address and I became accustomed to my @Me email and now like the idea of the @iCloud email address that was made. My question is can I change my iTunes account to my @iCloud name without losing my purcha

My iTunes account is under my @yahoo email address and I became accustomed to my @Me email and now like the idea of the @iCloud email address that was made. My questions are....can I change my iTunes account to my @iCloud name without instead of my @yahoo name without losing my years snd years of purchases ? Can I also create an @Mac address ? ....or is my @yahoo and my @iCloud already recognized as the same by apple and my purchases would already be fine as well as restoring my devices ?

Your purchases are permanently tied to the Apple ID (account) used to purchase them. They can't be moved to another account and you can merge accounts. You can start making new purchases with your iCloud ID if you want, but you will end up with two sets of purchases under two different IDs, adding further complication to your life.
Also, your @icloud email address is an alias of your existing @me address; emails sent to either address will be routed to the same inbox. You can decide which one you want to use as your default (as discussed here: http://support.apple.com/kb/HT5441) but you can't separate them.

I need to reset security question but the email that was saved for changing the password and security question is blocked , what can i do

i need to reset security question but the email that was saved for changing the password and security question is blocked , what can i do?
i purchased my account but i cant use that because apple ask me about security question and i forgot the correct answer

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a valid rescue email address, then use this procedure:
         Rescue email address and how to reset Apple ID security questions.
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                         Apple ID- All about Apple ID security questions.

I have a DVD folder (VOB files)that was rip for me. They play correctly though it has the minus icon and the folder empty and I can't get permission to retrieve my home videos files .

I have a DVD folder (VOB files) that was rip for me form my VSH. The DVD play correctly though it has the minus icon on the folder and appears to be empty and I can't get permission to retrieve my home videos files .

You're not dealing with your typical DVD-Video data structure with a SONATA_VOLUME. This type of data structure is designed to prevent someone from extracting the data and it's very effective at doing so. You've probably already found that the applications that allow you to copy, extract and convert the standard DVD-Video data structure (a "VIDEO_TS" volume) will not work with a SONATA_VOLUME (apps like Toast, MactheRipper and Handbrake).
While making a digital copy is pretty much not an option with a SONATA_VOLUME, capturing the video and sound via an analog to digital capture usually works just fine. Of course, that's not nearly as simple as popping the disc into your computer and a drag and drop or just clicking "convert" or "extract" and waiting for the copy or conversion to finish.
Do you have any video hardware for capturing analog video? A MiniDV camcorder will do the trick if your Mac has a FireWire port. You'll also need video capture software. I'd recommend a version of iMovie that supports DV-NTSC, Final Cut Express or Final Cut Pro.
My Sony DVD recorder creates SONATA_VOLUMES while my Panasonic DVD recorder creates VIDEO_TS folders. The Sony is unplugged and sitting in the corner.
-Warren

I would like upgrade a 16-bit dll that was developed for 16-bit windows to a 32-bit dll

I have an 16-bit dll library that was used for talking to a DAQ through Labview version 4 for windows 3.1. I would like to upgrade it so that I can make these calls through Labview version 4.0.1(32-bit). Can anybody do it for me
Attachments:
Megadac.llb ‏361 KB
MEGADLL.DLL ‏240 KB
Driver_Files.zip ‏71 KB

"cincidude" wrote in message
news:[email protected]..
> I have an 16-bit dll library that was used for talking to a DAQ
> through Labview version 4 for windows 3.1. I would like to upgrade it
> so that I can make these calls through Labview version 4.0.1(32-bit).
> Can anybody do it for me
You are asking not much aren't you? I mean your DLL acesses directly the
speaker hardware
in the first function I looked at. Hardware access in 32 bit Windows DLLs is
a big NONO.
Then looking at the communication source I see that your device is
appearently a nice GPIB
device.
In my humble opinion reimplementing the whole piece in LabVIEW would be just
as hard as
porting it properly to Win32 as a DLL. It is certainly a lot of work
in any
case but that
requirement to develop the solution in LabVIEW 4.0 seems rather antiquated
to me.

TS1702 I own a jigsaw puzzle that was made for iPad. It keeps freezing up on me?.

Similar Messages

Maybe you are looking for