TS1702 I upgraded software from Snow Leopard to OSX Lion. Now my Office Mac applications would not work

I upgraded software for my MacBook from Snow Leopard to OSX Lion. Now my Office for Mac applications would not work. Can anybody help? Thanks

Aribalto wrote:
I upgraded software for my MacBook from Snow Leopard to OSX Lion. Now my Office for Mac applications would not work. Can anybody help? Thanks
Quite seriously, though, if you wish to use MS Office to it's full potential and if you depend on it on a regular basis, then upgrading to Office 2011 is the only reccommended way to go. You can use the free Apps mentioned, learn to use iWorks (which I love, but others don't) or make your system a shambles and lose your easy to use interface by the other method. Deduct the cost of Parallels from MS Office and it becomes pretty cheap, if that is the only PPC program you wish to use, which is the norm as PPC is long gone from development.
MS Office 2011 is not expensive if it is one of your major work tools. Think of those who had to update their Adobe software!
Anyhow Cheers
Pete

Similar Messages

  • Will I be able to upgrade Directly from Snow Leopard ro Mountain Lion

    Hello All!
    Will I be able to upgrade Directly from Snow Leopard to Mountain Lion without going through Lion?
    Thanks in advance

    You have to upgrade Mac OS X Snow Leopard to Mac OS X Lion, Then Mac OS X Mountain Lion.
    If You have Snow Leopard, then upgrading to Mac OS X Lion is only $29.99 via the Mac App's Store, a one time fee for all your Macs. I recommend that you download it to all your devices first before you actually run the installation process. Once you've upgraded to Mac OS X Lion, then upgrade to Mac OS X Mountain Lion for a one time fee of $19.99.
    Mac OS X Mountain Lion will be available as a single software upgrade via the Mac App Store beginning in July 2012. The BEST PART is you only have to purchase it one time to upgrade all of your Macs. So its only like $50 bucks total for ALL your Macs to get both Lion and Mt Lion. Approximately, the same price it was when Snow Leopard's family pack came out for only up to 5 Macs. Except this time you get 2 upgrades for about the same cost for unlimited Macs compared to only 1 upgrade for up to 5 macs like before.
    To watch an exciting video from the WWDC/June2012 regarding what Developers, APP's, Lion & Mountain Lion, iPhone4S, and IOS6 will brings to the table this season, click below.:
    http://www.apple.com/apple-events/june-2012/
    I can't wait.
    Good Luck,
    Jenn

  • Hi I've just upgraded from Snow Leopard to Mountain Lion now Quarkxpress 6.5, Adobe creative suite CS2, Adobe Acrobat 7.0 professional and Microsoft Office 2004 will nolonger open. Can anyone please advise me what I can do to get these programs running.

    Hi I've just upgraded my MacBook Pro from Snow Leopard to Mountain Lion. Now my installed programs:- Quarkxpress 6.5 - Adobe creative suite CS2 - Adobe Acrobat 7.0 professional and Microsoft Office 2004 will not open - I get a banner saying not supported by power mac. Can anyone please help me I really need these programs for my work. Thank you!

    hi tuggerose
    i think it is bad new for you. if it's any consilation i went through the same thing when i loaded mountain lion when it first came out. i think the problem is that mountain lion is a pure 64bit operating system and the software you have is 32bit. earlier os's were able to emulate 32bit but the new system does not. the answer is new software. i did it and it cost me a load of money and much angst so your not alone.

  • Can I upgrade directly from Snow Leopard to Mt. Lion?

    I was just in the Apple store and the genius there suggested upgrading so I would have full use of iCloud between devices.  I've downloaded Mt. Lion but have not yet installed it.  Should I have done an intermediate upgrade to Lion first, or doesn't it matter.  (Slightly paranoid about making the jump, particularly if I'm liable to lose access to some programs through compatibility problems.)  The main reason for the upgrade was to get access to iCloud.
    currently on OS 10.6.8 on a Macbook 6,1, Intel Duo core 2.26 GHz processor, 2GB memory, 3 MB L2 cache.

    You may directly upgrade to Mountain Lion from Snow Leopard. It requires access to the Mac App Store &, at least. Mac OS X 10.6.8 which you have.
    I think skipping Lion is a good move. I no longer have it on any Macs in this house.

  • I am using a macbookpro and I want to upgrade it from snow leopard to mountain lion. How do I do this?

    I want to upgrade from snow leopard to mountain lion. So will I have to download lion and then mountain lion? Or can indirectly download mountain lion?

    You can install Mountain Lion directly without going to Lion first.  Just be sure your system meets Mountain Lion's requirements.  There are a few systems that are Lion compatible but not Mountain Lion compatible:
    http://support.apple.com/kb/HT5444

  • Available upgrades/benefits from Snow Leopard to Mountain Lion?

    If I download Mountain Lion from Snow Leopard, do I also gain all of the benefits and upgrades of Lion even though I am bypassing it? Or is downloading both recommended?

    Also make sure your machine meets the system requirements for Mountain Lion:
    http://www.apple.com/osx/specs/

  • Upgrade fails from snow leopard to Mountain lion, It says intall failed.

    I follow below steps to upgrade my Mac mini from Snow Leo to Mountain Lion.
    Purchase Mountain Lion from App Store
    Pay $19.99
    It downloads 4.5GB
    Ask me for restart
    Installation starts with 37min remaining to install the OS
    Around 11min remaining, It fails.
    Error Says (Install Failed, OS X  could not be installed on your computer)
    I tried restarting 5 times, but same result evertime.
    Any help will be really appreciated.

    Do you know how much RAM you have?
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, or are running 10.7+, at least try it from the Safe Boot part onward.
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitiion & use Disk Utility from there to Repair the Disk, then Permissions.
    Re-install if that doesn't work.

  • Upgrade path from Snow Leopard Server to Lion Server

    Just curious what the method is for upgrading a server currently running snow L. to Lion. Do you just buy the app and install? Will everything "reboot" exactly as is was? (Users, groups, share points, security settings, firewall, etc)
    As you can imagine any changes to a server in an office environment can be stressful.
    Also if anyone has successfully upgraded their servers to Lion and has feedback I would appreciate it.
    - C42D

    Hi there,
    I would wait a little to have the early bugs in both OS X Lion and OS X Lion Server sorted out.
    One common upgrade path i follow :
    - Backup system disk
    - Backup data disk
    Why save both disk for an upgrade (as you already backup the data disk don't you ? ) and not only system ?
    Imagine that once you update your server to OS X Lion Server, it updates some data too (mail database and so on) and you want to go back to OS X Snow Leopard Server...that would render your data unusable !
    Regarding OS X Server in general:
    - Backup Open Directory
    - Backup Services configuration
    Hope that helps

  • Do I need to update Bootcamp 3.3 after upgrading from Snow Leopard to Mountain Lion?

    Do I need to update Bootcamp 3.3 after upgrading directly from Snow Leopard to Mountain Lion? If so, what is the recommended version for my machine?
    Other pros and cons we should consider? Not sure what is considered best practice.
    We have a mid-2011 iMac (12,1) running Win7 64bit. Concerned about firmware updates not being compatible with Bootcamp 3.3. Firmware updates forThunderbolt port were part of post-Mountain Lion updater install. Not sure what other firmware/boot changes might have been applied to support the new recovery partition, for example. Will the 3.3 windows control panel still work safely?
    Win7 still boots OK, at least for now. Backup is current.
    I'd like to get the entire machine current again. Bootcamp 5.0 didn't want to download (appeared to hang writing to my external drive, which is otherwise fine). Bootcamp 4.1 refused to install on Win7 (claimed it wasn't for my machine, so I aborted. Downloaded from apple support page directly).
    I've searched the forums for this specific question - I see plenty of info for upgrading Bootcamp 4 to 5, but nothing for 3 to 5.
    Thanks much in advance,
    -b

    Appreciate the quick response.
    There are basically 2 schools of thought here:
    - If it ain't broke, don't fix it.
    - Don't fall off the upgrade cycle (apply patches whether you have an issue or not in order to ward off trouble before it happens).
    I don't have a specific issue that I'm chasing on the Win7 side right now. I'm attempting to address having fallen off the upgrade cycle by staying on Snow Leopard too long.
    I appreciate that the Win7 side under bootcamp is its own thing (upgrades to Mac OS don't cross over or effect the bootcamp partition) - except where firmware upgrades coming out of Mountain Lion change the hardware interface to Win7. Hence my questions.
    -b

  • I just update my Mac operating system from Snow Leopard to Yosemite and now have to upgrade my Epson Printer WF3540 so that it will be able to scan. Will Adobe be compatible with these softwares?

    I just update my Mac operating system from Snow Leopard to Yosemite and now have to upgrade my Epson Printer WF3540 so that it will be able to scan. Will Adobe be compatible with these softwares?

    Hi spiritentrep,
    What Adobe software are you referring to? Are you using Acrobat? You should have no problems running Acrobat XI on Yosemite, and as along as you have compatible scanner drivers for your Epson, you should be fine there as well.
    Best,
    Sara

  • All the software from Snow Leopard remain in the launchpad.

    After upgrading my mac book pro from Snow Leopard to Lion this morning, I found out that all the old software from Snow Leopard still reamin in the Launchpad.
    For example, I now have two icons for dictionaries, two icons for safari, two icons for photo booth and so on. The icon for the old software won't work, but the new one works just fine (which makes sense, but I don't know why the old icon isn't replaced by the new one.)
    I understand that I can choose to delete the old icons one by one, but I'm just wondering if I'm the only person who is experiencing this right now.
    Also, did I do something wrong here? Is there anyway to take care of this problem?
    Thanks in advance!

    Downgrade Lion/Mountain Lion to Snow Leopard
    1.  Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
    If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions.  If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

  • Search in finder doesn't find my files in OS 10.8, upgrade from snow Leopard to Mountain Lion

    after i upgraded from snow leopard to mountain lion . when i try too search files on finder . it does not find any of them although all the files are still there .so i need scroll up and down for few minutes to find my file manually . what could be the problem ?? anyone can help me with this .. thanks in advance

    Hmm... didn't help me. But, I'm glad to know that I can "refresh" the search profiles. That may come in handy in the future.
    I'm having similar problems where I can see a file from within an application, but the file doesn't show up in a Finder search. The file I see in the application also isn't visible in that application's folder (where it's supposed to be stored, in this case).
    The file exists, because I'm able to work on it from within the application. However, it can't be found on the computer by any means I have available. I've spoken with the manufacturer of the software and they told me where to look for the file, but it isn't there (as far as I can see). Of course, they suggest the Finder is "broken" and needs to be fixed. I don't think that's the case. I can easily find other files without difficulty.
    Could what I'm looking for be a "hidden" file?

  • Upgrade from Snow Leopard to Mountain Lion erase my Windows partition?

    Dear all,
    I know some one might have asked it but I just wanna re-confirm.
    Would the upgrade from Snow Leopard to Mountain Lion erase my Windows partition? I am currently using Bootcamp on my Macbook Pro (Late 2010 Version) and I do not have parallel desktop. I asked the same question when Lion was released, but HK Apple Store said YES and Melbourne Apple Store said no. I am a bit confused now.
    Thank you for answering. Cheers!

    Nothing.
    That said, you should ALWAYS have a backup as anything can happen at anytime.

  • Upgrading from snow leopard to mountain lion will i have trouble using my Pages and Iphoto since it's not the latest version

    I am contemplating upgrading my OS from Snow Leopard to Mountain Lion.  Currently, I don't have ICloud available on my computer.  I also keep getting messages to upgrade my IPhoto to '11 version as well as Pages.  I know, I'm behind, but my theory is if it isn't broke don't mess with it.
    My concern is I don't want to lose my pictures and YES, I have backed up with Time Machine to an external hard drive.  (I just hope that's good enough).  IF I upgrade to start using ML OS, will I need to restore anything from my external hard drive or will I be able to start using computer as if nothing changed? 
    I know enough to be dangerous and I'm hesitant to upgrade for fear of losing everything.  Would appreciate help.  Thanks!

    Charmedgreen wrote:
    So it's alright to "skip" downloading the Lion version first?  I can go directly from Snow Leopard to Mountain Lion? 
    Correct, in fact, Lion is no longer directly available from the App Store.
    Also, do I need to "empty my trash"  before going forward?
    No need.
    Matt

  • After upgrade my MBP from snow leopard to mountain lion all my smb connections stop to work.

    After upgrade my MBP from snow leopard to mountain lion all my smb connections stop to work.
    Now iám using mac os 10.8.2
    I can see the server, I can choose the drive, but when try to open a folder the message on Finder is: You don't have permissions to see the content.
    I already delete the key and try to connect again, but the problem persist. Already try change the ip from file server. Already try differents users. (admin, guest, etc...)
    I have a windows server 2008 and a NAS working with SMB protocol. Both with the same problem.
    That problem occurs only on Finder, if I try see the folder by Terminal, is possible to see my files.
    Any Solution ?
    Any Tip ?
    Any Question ?

    Not knowing how much RAM is installed in your iMac, your iMac can take a total of 8 GBs of RAM.
    Before upgrading to Mountain Lion, I would strongly suggest installing the maximum 8 GBs of RAM.
    Correct and reliable Mac RAM can be purchased from online Mac RAM sources Crucial memory or OWC (macsales.com).
    Here is OWC's link to your model iMac and the RAM modules you will need.macsales
    http://eshop.macsales.com/item/Other%20World%20Computing/8566DDR3S8GP/
    You can purchase and download OS X 10.8 Mountain Lion from the Mac App Store in the OS X dock.
    Before installing, it would be prudent to make a backup copy of all of your important data or your entire current system. Either using, optical discs, USB flash drives or external hard drives.
    This is too insure protection of your data in case something goes wrong with the install of OS X Mountain Lion.
    Good Luck!

Maybe you are looking for