TS1702 I was charged for a montly subscription even though the magazine does not have an issue this month. What is up?
I have Food Network Magazine set up as a monthly recurring subscription and was charged for the August issue. Only problem is that the last issue was a July/August issue so there is not an issue for August. Why was I still charged?
You can contact support for more details of the developer of the app and ask.
https://expresslane.apple.com
Similar Messages
-
Project Num Project Name Revenue Project Invoice Rejection Reason
Accrual Invoice Method
Method Method at Top Task
16 Contract Project Event Event No The project does not have a baseline revenue
Regards,
HarvirHi Harvir,
Please check:
PRC: Generate Draft Revenue for a Single Project Showing Reject Reason As the Project Does Not Have a Baseline Revenue
Thanks &
Best Regards, -
My Mac will not start unless I connect charger for a few minutes even though the battery is full
I am new to Mac and would someone know why this is happening? It started happening after the Maverick download.
Hi NewMacUser10,
If you are having an unusual power or charging issues with your portable Mac, you may want to try resetting the System Management Controller (SMC). The SMC controlls or affects many of the low level power related functions on a Mac, including things like battery level reporting and power switching. You may find the following article helpful:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Regards,
- Brenden -
I bought the UnZipper, vV1.0.00 (4+) , couldn't download (it reported an error in the end), didn't install it but still, I was charged. Also I can't update "The Unarchiver", could I have any problems with my Mac? It's a one-year-old Mac Pro Laptop. Could you help me please?
Mac Pro, Mac OS X (10.6.8)Check under App Store/Purchases for your purchase. Install it from there again. ... Hopefully you did buy this from Apple's App Store, right!
-
I was wondering why the iPhone 5 has the option for a battery percentage and the iPod touch 5g doesn't? I mean... they are almost both the same thing... just the iPod does not have the phone.
One likely reason is the % battery is not that accurate because of the smaller battery capacity in the iPod compared to iPhone and iPad. Users why use a % battery app post that the % reading changes a lot.
-
When I try to log on to my DC it says "The security database on the server does not have a computer account for this workstation trust relationship". It won't let me log on. I installed another server server 2012r2 (its virtual )
and I can get to ADSI edit.
I think what happened was I had a pc that could not connect without unplugging the network cable. So I found this fix
FIX: “The security database on the server does not have a computer account for this workstation trust relationship”2032011
I’ve seen a lot of solutions, or suggestions rather, with regard to the error in the title of this post. In my experience, the problem can almost always be resolved without extra domain add/removes and reboots, which is the most prevalent solution I have
seen around. Usually, this issue is due to a mismatch between attributes of the computer account in Active Directory and those values on the system itself. Here are the steps I take to fix this issue when it crops up:
Open up Active Directory Users & Computers pointed to the domain the computer account resides in
From the “View” pull-down menu, make sure that “Advanced Features” is checked
Navigate to the part of your organizational unit (OU) structure where the computer account for this server resides
Open the Properties for the computer object
Choose the “Attribute Editor” tab on the Properties dialog box
Check the Attributes dNSHostName & servicePrincipalName – anywhere that a fully qualified hostname is specified (e.g. myserver.mydomainname.com), make sure that the entry matches the hostname
you have configured when you go here on your server: Start -> Computer -> Right-Click, Properties -> Change Settings (under “Computer name, domain… settings”) -> Full Computer Name
As an example, for a fictitious W2K8 R2 server whose Full Computer Name is “srv1.mydomainname.com”, these attribute/value pairs should be in Active Directory:
dNSHostName:
srv1.mydomainname.com
servicePrincipalName:
HOST/SRV1
HOST/srv1.mydomainname.com
RestrictedKrbHost/SRV1
RestrictedKrbHost/srv1.mydomainname.com
TERMSRV/SRV1
TERMSRV/srv1.mydomainname.com"
Not reading it carefully I add a computer with the same name as the pc having the issue and followed the above. The problem is that I did not notice that the spn did not want the name of my server (serv1) but the name of the trouble
pc.
dcdiag output
PS C:\Users\administrator.TOM> dcdiag.exe
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
***Error: DC3 is not a Directory Server. Must specify /s:<Directory Server> or /n:<Naming Context> or nothing to
use the local machine.
ERROR: Could not find home server.
PS C:\Users\administrator.TOM> dcdiag.exe /s:DC2
Directory Server Diagnosis
Performing initial setup:
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site\DC2
Starting test: Connectivity
The host 9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM could not be resolved to an IP address. Check the DN
server, DHCP, server name, etc.
Neither the the server name (DC2.TOM) nor the Guid DNS name (9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM)
could be resolved by DNS. Check that the server is up and is registered correctly with the DNS server.
Got error while checking LDAP and RPC connectivity. Please check your firewall settings.
......................... DC2 failed test Connectivity
Doing primary tests
Testing server: Default-First-Site\DC2
Skipping all tests, because server DC2 is not responding to directory service requests.
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : TOM
Starting test: CheckSDRefDom
......................... TOM passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... TOM passed test CrossRefValidation
Running enterprise tests on : TOM
Starting test: LocatorCheck
......................... TOM passed test LocatorCheck
Starting test: Intersite
......................... TOM passed test Intersite
PS C:\Users\administrator.TOM> regsvr32 schmmgmt.dll
PS C:\Users\administrator.TOM> netdig /fix
netdig : The term 'netdig' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdig /fix
+ ~~~~~~
+ CategoryInfo : ObjectNotFound: (netdig:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> Setup /PrepareSchema
Setup : The term 'Setup' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ Setup /PrepareSchema
+ ~~~~~
+ CategoryInfo : ObjectNotFound: (Setup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> netdiag /test
netdiag : The term 'netdiag' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdiag /test
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (netdiag:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> nslooup
nslooup : The term 'nslooup' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ nslooup
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (nslooup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM>Ok fixed.
At a elevated cmd prompt run ;
C:\Users\administrator.TOM>setspn -x
As you can see the DC serv1 had duplicate SPNs.
Checking domain DC=TOM
Processing entry 1
HOST/serv1.TOM is registered on these accounts:
CN=SERV1,OU=Domain Controllers,DC=TOM
CN=C00049,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/TOWN-HBWJ29ZOQC is registered on these ac
counts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/town-hbwj29zoqc.TOM is registered on thes
e accounts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
RestrictedKrbHost/serv1 is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
RestrictedKrbHost/serv1.TOM is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
found 5 groups of duplicate SPNs.
Went to the computers OU and changed computer c00049 to the correct SPN. Now I have a new issues, I'll start a new thread. -
New nano (7th generation) - music is loaded, nano is charged, volume setting are all on but the music does not play thru the earbuds, Checked with a different pair with same results...I'm sure I must have something not turned on that should be but not sure - help!
Hi deb253,
If you are having sound issues with your new iPod Nano, you may find the following article helpful (it is aimed at the 6th Gen, but the steps should be similar for the 7th):
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/ts3474
Regards,
- Brenden -
I'm having a problem where Firefox keeps asking for my Amazon password, even though I tell Firefox NOT to remember this password. In Firefox options, Amazon is clearly listed as a site for which not to save passwords.
Do not use [[Clear Recent History]] to clear the "Site Preferences"
Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords. -
In iOS 5 I do not receive notifications for my email account even though the email setting in Notifications is turned on. I do receive other notifications. Does anyone have any suggestion on what is wrong or how I should correct it? Thanks.
Hey M0904,
I found the following information regarding troubleshooting notifications, I'd run through them and see if they resolve the issue:
iOS: Understanding Notifications
http://support.apple.com/kb/ht3576
Troubleshooting notifications
Push notifications require an active Wi-Fi or cellular connection. If you are not receiving notifications for a specific app, try these steps:
Verify that the app supports notifications.
After installing an app or restoring a backup to a different iOS device, open the app at least once to begin receiving notifications.
If the app requires entering or logging in to an account, you will need to do this before receiving notifications.
Check Settings > Notifications to ensure that the app is configured for notifications.
If notifications do not appear only in the Notification Center, verify that the Notification Center setting for the app is enabled.
If you are still unable to receive notifications and you are using a Wi-Fi connection, verify that the network or firewall is not blocking access to port 5223.
Have a good one,
David -
On my new iMac, mail has no sound after waking from sleep. If I select do not wake for network access in general preferences, the problem does not occur. Anyone have an idea on how to fix this? Thanks --
Same here on an older iMac since Lion. Thanks for the uncheck wake for network access tip though, it doesn't do it either in that case, I will leave it that way.
-
I would like to connect my Ipad 2 wirelessly via 3G with a wireless rooter. The Ipad does not have a slot for a card, so it will have to connect to the rooter via bluetooth. Is this possible? If so, where can I buy such a rooter? Many thanks! Ina
I'm not really understanding what you want. You mention all 3 types of connections: wireless, 3G and bluetooth, but I'm not clear on what you want to do. What the router is supposed to do, and why do you think it would need to connect via bluetooth?
I'm thinking you want to buy a Mifi type device that will allow you to connect to a cellular network and then connect the iPad to that device via the Wifi network the Mifi produces.
Is that so? -
I have an iphone 4 which was lost on the bus ride home from an amusement park with my class. The phone does not have find my iphone on it and i cannot track it. Is there anything you guys would say i should do to get this phone back.
Call it and ask whoever answers to give it back to you.
-
I have an ipad2. PLEASE can anyone tell me if I can watch a movie purchased from iTunes without wifi (after I have downloaded the movie and hit play while connected). My husband is going for chemotherapy and the hospital does not have wifi.
Yes, if the movie has been downloaded to the iPad, then you can watch it without Wi-Fi.
-
App Rejection: After purchasing the subscription the magazine does not start to download.
Hi Everyone,
My app has been rejected, with error code 2.2 that it exibits bugs namely "After purchasing the subscription the magazine does not start to download.".
When I've gone back to test my app on the ipad, I've realised that it doesn't say 'purchased' after confirming the subscription, and instead it still says 'buy' and the subscribe button is still enabled.
I've followed the instructions in this article: http://helpx.adobe.com/digital-publishing-suite/kb/subscription-fail-ios-renditions.html, I've set all published dates to the 29th of October 2012 both in the Folio Producer Organiser and in itunes connect (Newsstand, in-app purchase section) and it still doesn't work. I've entered the secret code in the administration area also. The subscription product ID is identical in itunes connect and the Viewer builder. I've deleted the app and re-downloaded it multiple times on the ipad, updated the folio in the folio producer many times...
Can anyone see what I might be doing wrong? Is there something I have missed?
I appreciate your help.@FLTAron, were you able to resolve your issue, 'cause I am facing exactly same issue
-
I have an Ipad 2 and are having problems sending out emails in one of my email address. This is a POP3 email Account? I always get a message reading that the email was not sent because the server does not allow relaying. I have no such problem with gmail. What could be the problem and how do I resolve this. Is it about settings?
Richard.Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.
Maybe you are looking for
-
Not able to re-schedule the prod ord.........end date is not coming as desired
Hi Experts, I want to change (reschedule the dates of production order) but when I am trying to do so system automatically picks its own dates and re-schedule the prod order.... Please refer attachment In MD04, for component prod order (rescheduling
-
Hi and sorry for the title but it well summarize my question. In fact I applied a completion percentage of 25% on a task with a finish date inferior to the entered status date. MS Project only modified the Act. work of the task but not its finish da
-
Emulationg OS 9 Classic anyone
I have an old program that only runs on classic OS9. I understand there are some emulators out there, has anyone had any success? Thanks, Steve
-
My iMac hard drive died and I had photos in....
photostream and they appear to be missing...are they gone forever?
-
My iphone 4s screen is black, appears to be dead-what can i try?
Phone was fine last night, woke up and now it's dead, had been charging all night-can't power on. Screen is black