TS1702 indicating 2 locations on and off for same phone with find friends
what causes the find friends ap to show same person in two different places?
My 4s i-phone which is 2 years old cannot find any wi-fi networks not even my home network... I had the same problem two months ago but i turned off the i-phone for 8 hours and then it was okay... Now it happened again.... I tried to restart the modem but whilst my laptop is connected regularly, my phone still cannot find any wi-fi networks... I restart the i-phone, i reset it, i chose reset network settings, reset all settings, i turned it off for a whole day in case it was overloaded, i turned on the airplane mode and turned it off again, i put it into the freezer for 10 minutes within a zipped bag but 3 days now and i still cannot be connected to my home wifi... I went to the technician today and he told me that it means that wi-fi is broken and that i need to change it with a charge of 70 euro but i have to give my phone for 10 working days so as to be fixed... I am so frustrated and i don't know if i want to give 70 euro for wifi since i don't know if it would make the same problems again...
Similar Messages
-
My ipad has been disabled and off for almost a year already i want to restart my ipad but doesnt want to charge is there any way i can make my ipad turn on or restart i alreaady tried charging it for acouple hours and clicking the middle and top button at the same time but it still doesnt work.... is there any other way to restart my ipad?
You don't just click the home and sleep button, you have to hold them down for at least 10 seconds while it is connected to the charger. If it comes awake (and it could take several tries) ignore the red Off slider, wait for the Apple logo and then let go of the buttons.
But that may not work. Polymer Ion batteries need exercise, a full power cycle is recommended once a month. Your battery may be dead. -
IPhone 4 Buzzer going On and Off for no reason.
Has anyone had any problems of the iPhone Buzzer going on and off for no reason? I rebooted the iPhone but still doing the same thing. Help!
My wife has a 3gs and I have an iphone 4 and have no such issue.
Have you restored as new?
If it is still inside the one year warranty you can make an appointment at the local genius bar and they will replace it, if they cannot solve it.
You can leave feedback for Apple at:
http://www.apple.com/feedback -
I've tried safe mode but I dont understand what is happening. I tried pressing the power button on and off for several times and nothing happens, I'm always stuck on an apple logo and a spinning wheel. I dont know how to get to the Partition and the DiskUtility. The Apple Logo and the Progress Indicator will continue to spin and I have literally no idea what to do. i am in desperate need of help. help me pls
Turn it off.
Start it up again and (at the sound of the chime) press and hold the command and the R keys, hold them down until Recovery loads. When it does you will select Disk Utility and you should be on the First Aid tab when it opens, if you are not please select it. Then select the partition (in the side bar, 2nd entry on the list, see picture).
Yours is probably called Macintosh HD.
Once you have selected it go to the lower righthand corner of the First Aid dialog and press Repair Disk.
This will take 10 minutes approximately. Post back when it is finished and tell me what it says. -
I've tried safe mode but I dont understand what is happening. I tried pressing the power button on and off for several times and nothing happens, I'm always stuck on an apple logo and a spinning wheel. I dont know how to get to the Partition and the DiskUtility. The Apple Logo and the Progress Indicator will continue to spin and I have literally no idea what to do. i am in desperate need of help. help me pls
Reboot hold the command R for recovery.
-
Calculate total and average for same key figure
Hi Experts,
I have a requirement where I need to calculate total and average for same key figure no of employees.
eg:
If I enter 03,2009 as Input the reuslt should give from financiual year starting to current month.
11.2008 12.2008 1.2009 2.2009 3.2009 average
11 10 12 10 10 10.6
10 10 11 12 10 10.6
total 21 20 23 22 20 21.2
we have only one characteristic in rows... companycode.
Waiting for your Inputs.
Regards
Prasad Nannurino it will work for u
you have to use variable on 0calmonth or fiscal period depending on what Time characteristic u are using.
lets say that variable is zcalmonth
it is based on 0calmonth for e.g.
now u restrict keyfigure with this variable zcalmonth with time char. = 0CALMONTH
copy and paste the restricted keyfigure
now set offset for variable in variable selection screen dialog box = -1
repeat this until u want
make this variable mandatory
now at query execution user will select any value for month/year
and u will see all 5 months in result set
now there can be maximum 12 months in a year, so u end up creating only 12 restricted keyfigures.
use YEAR in restricted keyfigure too, and restrict it with YEAR VARIABLE processing by CUSTOMER EXIT = CURRENT YEAR
in this case it will automatically removes any additional values...
for e.e.g
YEAR = 2008 only
User entered 6/2008
so lets say ur financial year starts in april 2007 and ends in april 2008
so u expect to see
4/08
5/08
6/08
but u created 12 restricted keyfigures , so it will show upto
4,5,6 months only -
Using DAQ generate a 38kHz on an analog output on and off for ms using labVIEW
I wish to generate a 38kHz pulse on an analog output of a mydaq to drive a infrared led. The 38kHz signal is not continuous but is on for 1ms and off for 1ms.
Hi pat,
you generate a waveform using 38kHz as sample rate and a rectangular shape of 1ms HIGH level and 1ms LOW level. Using some simple math you will notice you need 38 samples at 38Khz to output a value for 1ms…
Then you just output that waveform on a AO channel.
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome -
i lost my phone and it is switched off now...how can i find my phone with find my iphone app active thru icloud?? pls help me.
Welcome to the Apple Community.
You can only locate your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely. -
Can I run Apple TV 1 and 2 together on the same iTunes account and on the same tv with two hdmi slots?
Yes.
Captfred -
how do i backup my iphone 3 started on one itunes account and restore to the same phone with a different itunes account without losing all my information?
Please search the forums. This has been covered here extensively.
-
I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.
I have been experiencing the same problem. My mail app won't even open on my Late 2011 Macbook Pro. It will show as open, but the app will never actually show up.
-
yesterday i plugged my new Iphone in to my laptop and connected it up with Itunes. Itunes then deleted all my pictures off my new phone and reset my new phone with all the settings of my old phone! how do i get my pictures back????? Before you say Icloud they are not on there
Sorry you can't. Looks like your phone restore to an older backup.
future reference import your pics to your PC, that way you can always sync it back using itunes
http://support.apple.com/kb/HT4083 -
How do I do use the custom code and format for a percentage with 2 decimals in Report Builder 3.0?
In Report Builder 3.0, I have the following custom code entered:
Public Function SafeDivide(Numerator as String, Denominator as String) as String
Try
If Numerator = “” or Denominator = “” then
Return “-“
End if
If Numerator = “-“ or Denominator = “-“ then
Return “-“
End If
If CDbl(Numerator) =0 or CDbl(Denominator) = 0 then
Return “-“
End if
If IsNothing(Numerator) or IsNothing(Denominator) then
Return "-"
End if
Return Val( ( (CDbl(Numerator) / CDbl(Denominator) )*100 ) )
Catch
Return "-"
End Try
End Function
I call the custom code in the cell with the following equation:
=Code.SafeDivide(sum(Fields!TY_UNITS.Value)-sum(Fields!LY_UNITS.Value),sum(Fields!LY_UNITS.Value))
I have the format for the cell set to 0.00%, but it’s not being followed.
I want the result to be formatted as a Percentage, but instead I get values like:
-78.9473684210
80
300
-100
I have the format for the cell set to 0.00%, but it’s not being followed.
How do I do use the custom code and format for a percentage with 2 decimals?Hi AngP,
After testing the issue in my local environment, I can reproduce it. Based on my research, I find this issue is caused by the type of Units_VAR_Percentage cell is string, while the type of CDbl(Parameters!Var_Threshold.Value) is double, so they cannot be
compared.
To fix this issue, we can add a hidden column (Textbox91) next to the Units_VAR_Percentage column, and type =(sum(Fields!TY_UNITS.Value)-sum(Fields!LY_UNITS.Value)) /sum(Fields!LY_UNITS.Value) as the expression. Then use the expression below to control the
BackgroundColor:
=iif(iif(reportitems!Units_VAR_Percentage.Value=CStr(format(reportitems!Textbox91.Value,"0.00%")),reportitems!Textbox91.Value,0)>CDbl(Parameters!Var_Threshold.Value),"Yellow","PaleTurquoise")
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
if the location service is off but the phone is online, may i able to locate where it is by the serial number or my apple ID?
any one can show me a way, please helpNo. The only way to locate it is with Find my iPhone. If location services is off, you can't locate it.
-
My centre button has stopped working and my top lock button has stopped working too. I've had this iPhone 2 years now, can I take it into apple and swap for another phone or am I not covered? Thanks
The standard Apple warranty is 1 year. I believe you can purchase AppleCare+, which extends the warranty to two years from the date of purchase. This extended warranty needs to be purchased within 30 days of the purchase date for the phone.
If you have the extended warranty, you may be able to get a replacement phone at no cost. You will need to make an appointment at an Apple Store Genuis Bar and have them take a look at the phone.
If you did not purchase the additional warranty coverage, you should be able to purchase an Out-of-Warranty replacement, which is $199 for the iPhone 4S.
~Lyssa
Maybe you are looking for
-
I am reading back values of several waveforms that were saved to disk using the write to spreadsheet vi. Some of the data sets are longer than others eg. 35 seconds vs 45 seconds. All have the same sample rate. See the code segment below. If I select
-
Custom Load Balancing Question.
Can anyone give me any pointers on creating a custom load balancing algorithm / cluster proxy.. Basically i want to have something similar to HttpClusterServlet but that you can customise the load balancing on... for example in a cluster of
-
Cannot get IE8 and FlashPlayer10 to get along
While using Internet Explorer 6 I never had any issues with Flash Player. I wasn't even aware that it was there. After installing the new Internet Explorer 8 I began getting more computer freezes than I can ever remember having. This happened wh
-
I'm signed in and keep getting an error while signing in
Trying to convert PDF file and keep getting the error sign
-
Difficulty Installing Updates to Digital Photo Professional
I'm trying to install an update for DPP. I've downloaded the latest file from Canon, unzipped it and clicked the installer. I however get a message back that I don't have sufficient privileges to install and to log back on an an Adminstrator. I've c