TS1702 IPhone5 video camera not recording sound

My new iPhone 5 does not record audio when using the camera to record video. Any suggestion welcome

I have the same problem.  It's intermittent but it doesn't work more than it does work so it would be easy to replicate.  Sometimes audio would record in and out in a single recording, sometimes nothing but hissing/static.  I do not run a cover of any sort, and my fingers are not covering any holes.

Similar Messages

  • If my video did not record sound, can i get it back somehow?

    I took videos of myself after my wisdom teeth were removed, and it did record, but with no sound. Is there any way I can get the sound on to the videos?

    i was pretty out of it so im not sure haha but i did record some videos where the sound is crystal clear. some had sound and then others did not

  • In my first iPhone 5, the speaker didn't work and people could not hear me on Speaker phone when I used it. When I used the video recording it did not record sound at all only a hissing/static sound, no voice.

    In my first iPhone 5, the speaker didn't work and people could not hear me on Speaker phone when I used it. When I used the video recording it did not record sound at all only a hissing/static sound, no voice. I wished for a software fix. I did a hard reset, nothing. I did a full restore to factory settings not putting my backup on and the problem persisted.
    i have been provided with this info
    You can find troubleshooting tips, how-to articles, and moderated
    > > discussion forums on our support website:
    > >
    > > www.apple.com/support
    > >
    > > iPhone: Basic troubleshooting
    > > http://support.apple.com/kb/HT1737
    > >
    I did every step in the link that i have been provided with (thank you), but I’m
    still experiencing the same issue. My experience with Apple has been
    excellent and this has been the first time I have experienced something
    like this with an Apple product. I hope we can find a quick solution.
    In order to get the iPhone 5 as soon as it launched (being a major fan of
    Apple products!), I purchased my iPhone 5 from the UK through a friend of
    mine who lives there.
    My question is: can I have the faulty device replaced within Saudi by one
    of the official resellers here (we have 3: STC, Mobily and Zain)? I want to
    avoid the disruption, complication and expense of sending it back to the
    UK.
    Could you advise whether this is possible or not, and if not how should I
    go about having the device replaced?
    Thank you in advance for your cooperation.

    Nice try! Take a hike.

  • I have a HP610-1150f. not recording sound when using webcam in touchsmart screen.

    I have a HP610-1150f. not recording sound when using webcam in touchsmart screen.  I have looked thru this forum and I don't see anyone else having this problem. (unless I missed it).  The recording works in Notes, but not when I open Webcam and try to record from there. video recording works fine. I have had this computer less than a month and I am having a couple of problems with it. Still loving it though.

    Hello schae731: Welcom to HP Forum and your new Touchsmart. You need to contact HP Direct Support on line your Touchsmart comes  with one year warranty so use it why you can. You can contact them through your HP Support Assistant or on line. They will help you with trouble shoot the web-cam software. Goto your computers model and make support web-site. They will also help you with your other issues as well.
             I am using the older version software so I won't be much help. Please repost if HP direct support is un able to help you resolve your issues. While you are chatting with them have them check out your computer do it before your 1 year warranty expires. Have fun with your new computer.

  • Connect not recording sound at various times or displaying certain visual in Photoshop

    Hello,
    Has anyone had a problem with Connect not recording sound in various places or not showing visuals like the marching ants in Photoshop or the red overlay when resizing the cursor which is also in Photoshop?
    Stephen Burns

    Hello,
    Has anyone had a problem with Connect not recording sound in various places or not showing visuals like the marching ants in Photoshop or the red overlay when resizing the cursor which is also in Photoshop?
    Stephen Burns

  • Hello is there a solution to play some avi formats with quicktime because with all the codec i can play video but not the sound thank you by advance (im on windows 7 so perian cant help me)

    hello is there a solution to play some avi formats with quicktime because with all the codec i can play video but not the sound thank you by advance (im on windows 7 so perian cant help me)

    I did some googling and found alot of topics from you on this issue, to me it simply seems like on of the connectors is broken or loose.

  • Photo booth will not record sound with video

    I have always been able to record sound when using photo booth. Now i cant seem to do it.

    Have you got your Input Sound in System Prefs set to Internal microphone or Line in?

  • How to connect a video camera (not a webcam) in a way that Flash player sees it as webcam

    Dear All,
    I'm working on an interactive/augmented reality project for an exhibition, where viewers trigger a video by standing at a certain point in a room (just like BBC's Frozen Planet). My problem is that the webcam's image that we've used to capture the audience is not up to the task and produces a really low quality image. Now I'm trying to to attach a video camera with Blackmagic's Mini Recorder but Flash Player 17 (standalone) doesn't recognise the the input as a webcam. Is there a way to connect an external camera so flash can handle it? Alternatively, can anyone recommend a superb webcam, that is SIGNIFICANTLY better than Logitech's Pro 910? Thanks in advance!

    We just get a list of webcams from the browser (who gets them from the OS).  If you could convince the OS that the camera is a webcam, you'd be good, but that probably means writing your own drivers.
    Alternatively, could you use something like Flash Media Server with the camera attached as a live video source, then stream a high-res video back to the client for processing?

  • IMovie not recording sound with iSight image

    In system preferences > sound, I have Built-in microphone selected. But Audacity won't record sound (never works anyway) and iMovie will record image from the iSight, but no sound.
    What am I missing?

    You're welcome. After further investigation, not only does the volume in the system preferences affect the mic, the actual "voice over" (microphone icon) does as well, even though I'm recording with iSight and not, specifically, a voice over.
    However, fantastic YouTube video diaries or whatever they're called must be done on a PC or a Mac that knows how to shut up. If there's one thing right now that's about to make this computer fly through the air, it's the fans that rev up to 6000 and even an external mic picks up the noise. Not much I can do about it. Maybe Snow Leopard and iLife '09 solved the issue.

  • Why is my video cam NOT working again after it had been sent in to get fixed already

    Model Number: QE024UA
    Model Description: HP PAVILION DV6-6169US NOT
    Serial Number: 5CH1430SD9
    I had my computer sent to get the video cam working... they sent it back and it worked for about 2-3wks and is not working again also when I call someone elses computer I can hear and see them but they can no longer see or hear me. Cant see due to video not working again again on my part but they used to be able to at least hear me.. Now neither works. I have written plenty of messages to HP (at least 3 that I remember) but with no reply. Not a happy camper right now about this. When I bought this computer It had everything I thought I needed and more for my basic use. I chat on facebook Play their game and browse the web.. watch my netflix. I never really needed a video cam but now since family life has changed and I live so far away from them I specifically ordered this computer cuz of its high quality in video plus I liked the fact it played Blue-Ray. I used to have a Dell that lasted me a good 5yrs of usage. I have had this less than 3mnths and twice the cam has gone out on me.

    I'm avoiding buying anything else to use my iMac and had the same problem. I have PC headset with mic and headphones and also a Motorola bluetooth headset, neither worked how they should, no mic function:
    I can use the pc headphones that I already had (just didn't input the mic jack part), and the iMac built-in mic together as I chat.
    Just go to System Preferences and make the Sound settings for Output to built-in Headpones and Input to Internal Microphone -select "Use ambient noise reduction.
    Its a get-around, but it works.

  • IPad video camera has no sound

    iPad video camera has no sound

    Found the fix.
    If the reboot doesn't fix it.
    If the headphoens work find, but no external speakers.
    If the double-click and page right to the software mute, doesn't show the sound knob - just the brightness
    If your pop-up shows "Docking Station"
    Then, the problem is very likely a dirty connector.  The iPad/iPhone/iPod connector uses a resistor value to determine if the device is connected to an external 'speaker'.  There are a range of resistances, for a range of products.  This is known as the Connector Pin 21 issue.
    Take some windex on a que-tip, or perhaps a Windex paper scrub and rub it on the bottom connector port.  Somehow, "something" has gotten on those contacts, and it is pulling the voltage on pin #21 down - so that the iPad "thinks" it's connected to an external speaker - this will disable the internal speaker circuitry, as well as the internal speaker volume controls.
    Do not over-saturate and short out your iPad.  Do not throw it in the sink, do not use the kitchen faucet to flush it out.  A Que-tip with a few drops of Windex (or other gentle cleaner) should work just fine.  Takes all of 30 seconds - and magically, the volume knob appeared and everything worked just fine.

  • Video Camera not detected through Firewire

    I've been having trouble connecting my video camera to my computer for importing video into Final Cut.
    After some deduction, my main conclusion/concern is that when I hook up my Canon minidv camera to the computer via firewire 400, it fails to show up in the system profiler under hardware>firewire.
    I first tried all sorts of hookup sequences (involving turning off/on cpu, off/on camera, off/on program, and plugging firewire at certain times) No luck. Final Cut could not detect camera.
    Secondly, tried the same thing with iMovie, but same result.
    Thirdly, I bought a new firewire cable. Still didn't work.
    Then, I switched my Canon with my friend's Sony video cam. Same result.
    What's confusing is my Mac Pro's firewire 400 port works. I connect a Maxtor external hard drive, it is recognized, and it mounts all the time without a problem (I can also see the drive's info through system profiler.) However, when I connect my camera to the comp, and open system profiler's firewire status, I get the spinning wheel for a bit, then it says "Warning: Unable to list FireWire devices." Sometimes I don't even get that message, and system profiler just stays the same saying "FireWire Bus>Built in Hub" as if nothing is connected at all.
    I also tried daisy-chaining the camera through the recognized external hd to the comp. Though, when I attempted to check the status in system profiler, the computer froze and I had to hard shutdown. Not good.
    I've attempted all I can think of. Any help and suggestions would be much appreciated. Thanks!

    is the camera on apple's "approved" list? I forget where to find it but there is or was such a list. do you have any other fw devices connected? for whatever reasons, often cameras must be the only fw device connected. My first attempt would be to turn on the device and connect it with no other fw devices connected. If it did not work, I would begin my standard hardware trouble shooting which consists of booting from my clean system hd that I normally keep on a shelf. It is an HD image of my system as it came from Apple. In your case I'd get an HD and install a clean 10.4 on the HD (without updates) and try connecting after that. IF 10.4 works you could try updating to 10.4.11 and so forth. Doing this process requires two drives so you can keep a good working boot drive while continuing to update till there is a problem. This supposes it's a software issue. Doing some searching on your camera make/model and cross referencing with apple and firewire should give you an idea as to whether others are having trouble and whether it's a common problem or a software issue. If others are having no issues then hopefully it's software. Another option would be to get a deck. I use a basic dv deck and you might want to go that route too. it's a much better thing in the long run anyway and if you can afford it and can find a known-good deck it would save a lot of trouble shooting time and hassle. obviously get one you can return if it doesn't connect.

  • Webcam Video pauses when recording sound from microphone

    I have a strange problem which i am encountering when recording and playing back webcam video.
    I am developing a small application for recording webcam video and audio using FMS and playing it back later from FMS.
    I am using AS 3.0, FMS 3.5 and flash CS 5.5
    When i record only the video from webcam without sound from microphone the playback is fine. But when i record microphone sound also along with the video, and when i playback the video pauses right where the sound starts for 10 sec or more and then it starts playing. Towards the end the video pauses again and only the sound goes on till the end.
    I tried setting the buffertime to 50 before ns.publish and ns.play but that didnt help either.
    I tried using the flvplayback component and even their it pauses.
    Any help is appreciated.

    Haha, that is such a genius use of common sense! Thank you, I didn't think of that. I certainly will!
    However, does anyone know if there is a way of adjusting the program of garageband to fix this issue? Using headphones certainly fixes the symptoms of my problem, but it doesn't actually address the root cause: garageband should only be recording the input through the microphone. I shouldn't need to wear headphones. (And doing so inhibits my ability to clearly hear myself play, and stay in tune.)

  • ISight not recording sound in

    So, Ive been playing around with Photobooth, and recently, I've lost the ability to record the sound of the videos I make through it.
    I've checked the sys pref and test the audio input mic and the bars move just fine. I can even record sound from the isight through iMovie - it comes through fine. Any idea on how to address this? I'm perplexed. Sounds like the app to me...but I'm a recent convert

    Hello Tubulcane
    If repairing permissions doesn't help, I agree with your diagnosis. Try reinstalling the app. Take a look at this post if you need help:
      http://discussions.apple.com/thread.jspa?messageID=6520690&#6520690
    EZ Jim
    PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.1)  External iSight

  • Digital Video Camera not showing up as device on desktop

    I have a 6 year old sony digital video camera. I am able to connect via firewire and upload video using imovie without a problem. It shows up as an option in imovie as dv-vcr. However the video camera does not show up in the desktop and when it is connected I can't find it being recognized anywhere using spotlight. So I am unsure of how to disconnect it. Normally if it shows up in the desktop I would just 'eject' it by dragging to trash. But now I just turn it off and unplug it. When I do it that way the 'did not disconnect properly' message shows up and my external harddrive that is plugged into the other firewire port disappears. Any ideas on how to solve this?

    Hi mpagriffin
    Try this: with Finder on the menu bar go to *Finder / Finder Preferences* and select General, then check all the boxes for *Show these items on the Desktop*.
    You also might check to see if it shows up and ejects in Disk Utility?
    note: that some devices won't show up on the desktop, my wife's Canon will only mount in and eject from iPhoto while all of our other camera's mount on and eject from the desktop.
    Dennis

Maybe you are looking for