TS1702 Live Notes application does not play back the audio.

I bought the Live notes application. I tried to use the microphone to tape the voice. It shows the audio level, if you close IPAD it inform you that is recording de audio. But when I went to play my note the audio does not happen.

Hi
1) Try a Hard Reset as follows.
Remove any devices connected to the notebook. Shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery, plug in the AC Adapter and start the notebook - check if the speakers are now working.
2) Please First check if the speaker icon on the unit is not muted.
3) Go to device manager and uninstall the Sound driver and restart and unit will install the driver automatically.
4) Try doing System restore to the date when the unit was working fine.
5) Try to update the driver from hp.com website for Audio & Bios.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

Is it possible to record parts of a phone call on Skype into Logic, then play back the audio while still on the Skype call? I'm a voice teacher coaching students in other cities, and Skype is not helpful with this idea.

Is it possible to record parts of a phone call on Skype into Logic, then play back the audio while still on the Skype call? I'm a voice teacher coaching students in other cities, and Skype can't offer any suggestions.

Hi
What I'm saying is:
Make a new MONO audio track (use the + button). Assign it to input 1
Make a second new MONO track, assign it to input 2
Name both tracks, record-enable both tracks, and record.
You could, of course, make both tracks in one go via the new track dialog box, and hav ethem automatically assigned to ascending inputs.
CCT

On my iPhone 4s the video play back , the audio is very low . All other audio is good on phone even older video plays nice and loud . I have no idea what is wrong?

On my iPhone 4s taking video then playing back ,the audio is so low you can barely hear it . I played older videos and the audio works perfect . All other audio works perfect on the phone too. I have no idea what is going on ?

Hey!
I have tried holding down the home and power button countless of times. It doesnt respond at all. Plug my phone to a charger and hold down the power button and my phone switched on. But it said Activation Required and said connect to Itunes. As e screen remains on the connect to Itunes screen, I disconnect the charger from my phone and my phone went dead instantly. My battery is full btw. Tried connecting to Itunes through my Macbook Pro but iTunes doesnt detect my device and the apple logo flashes for about a few seconds on my phone and then disappear and then came back on again. My Iphone has been connected to my laptop for about 30 mins and the apple logo has been coming on and off for 30 minutes now and Itunes has not detect my device yet.
SIGHHH.

Re: songs ripped from CD: does Match play back the latest remastered version?

This question is best asked by way of example: let's say I rip a CD of The Beatles' 'Sgt Pepper's Lonely Heart's Club Band'; however, the CD is the original 1987 CD. Does iTunes Match play back this 'original' version of the album, or would Match play back the new, remastered version of the album from 2009? In other words, does iTunes Match 'upgrade' the quality of the songs from my ripped CD's -- playing the newest / remastered versions that are typically the version of the album available in the iTunes store. Or, for any CD I rip and add to my Match collection, does it only play back the CD "as is", without matching it with the latest version of the album available from iTunes.

Hi,
A lot depends on whether Apple server has the original version as well as a remastered version. It is likely that the cd would match with the original but you may find that it will match with the version that is currently available in the iTunes Store. Don't be surprised if some songs match and others don't.
I suggest that you rip at 256 Kbps AAC to ensure that if the track is uploaded at a similar quality to the tracks available.
Jim

When I render my project to a NTSC file for Computer play back, the audio is not rendered and the file has no sound. How do I fix it?

I build my project using videos and photos and I add sound at the end for a few photos. I then render the project to a NTSCDVD Standard file so I can play it on a Computer. Once the file is rendered and I play it, there is no sound at all. I am using Premiere Elements 13, recently installed on 12/29/2015. Previously, I had a trial copy and before I could uninstall it, it disappeared. I don't know if that had any thing to do with my full version.

richardson
On what computer operating system is your Premiere Elements 13 running? For now I will assume Windows 7, 8, or 8.1 64 bit.
What are the properties of your source video and photos and what project preset did you (manually) or the project (automatically) set as the project preset
to match those source properties? In this regard, please tell us the readings that you see under Edit Menu/Project Settings/General
Editing Mode
Timebase
Frame Size
Pixel Aspect Ratio
even if the fields look grayed out.
What is your choice under Publish+Share/Computer/ which is using the NTSC DVD Standard preset? Are you using Publish+Share/Computer/MPEG with the NTSC DVD Standard preset? If so, are you using the default export settings or customizing them in anyway under the Advanced Button/Video Tab or Audio Tab? If you export your Timeline to Publish+Share/Computer/QuickTime with a preset = NTSC DV, does your file have sound in the export with your player?
What are you using as the player for this export?
Let us start here and then decide what next?
Thanks.
ATR

I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

The default settings mostly likely use an audio sample rate of 32k. This doesn't work probably in FCP. You're probably better off capturing the tape in iMovie.

HT201412 my wifi button does not working / it looks grey and can not open it... and my some applications does not working too ... please help me ... I bought this I phone from Beirut/Lebanon and i live in Turkey...

my wifi button does not working / it looks grey and can not open it... and my some applications does not working too ... please help me ... I bought this I phone from Beirut/Lebanon and i live in Turkey...

Here you go:
http://support.apple.com/kb/ts1559

The application does not use the screen and run in the background

Hi
I have downloaded a package of j2me Midlet
from [link] here [link]
and try to reuse the code
but I get the following error when running the code:-
The application does not use the screen and run in the background
I think the error into one of these two classes
package main;
import javax.microedition.midlet.*;
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import javax.microedition.media.Manager;
import javax.microedition.media.MediaException;
import javax.microedition.media.Player;
import java.io.IOException;
import java.io.InputStream;
public class MainMidlet extends MIDlet implements CommandListener {
    private SSGameCanvas gameCanvas ;
    private Command exitCommand ;
    private Player player = null;
    public void startApp() {
try {
       //   create new game thread
          gameCanvas = new SSGameCanvas();
          gameCanvas.start(); // start game thread
          exitCommand = new Command("Exit",Command.EXIT,1);
          gameCanvas.addCommand(exitCommand);
          gameCanvas.setCommandListener(this);
            Display.getDisplay(this).setCurrent(gameCanvas);
   catch (java.io.IOException e)
            e.printStackTrace();
        try {
            // start sounds
            InputStream in = getClass().getResourceAsStream("/resource/startfly.wav");
            player = Manager.createPlayer(in,"audio/x-wav");
            player.setLoopCount(1);
            player.start();
        catch (MediaException ex)
            ex.printStackTrace();
         catch (IOException ex)
            ex.printStackTrace();
    public void pauseApp() {
    public void destroyApp(boolean unconditional) {
        if (player != null) {
            player.close();
        System.gc();
public void commandAction(Command command, Displayable displayable) {
       if (command == exitCommand)
             destroyApp(true);
             notifyDestroyed();
package main;
import java.io.IOException;
import javax.microedition.lcdui.*;
import javax.microedition.lcdui.game.*;
public class SSGameCanvas extends GameCanvas implements Runnable {
    protected GameManager gameManager;
    protected boolean running;
    private int tick=0;
    private static int WIDTH;
    private static int HEIGHT;
    private int mDelay = 20;
    Form mainForm;
    Display display;
    //private int MaxTime;
    public SSGameCanvas() throws IOException{
        super(true);
        gameManager = new GameManager(5,5,getHeight()-10,getWidth()-10,this);
    public void start() {
            this.running = true;
            Thread t = new Thread(this);
            t.start();
    public void stop() {
        running = false;
    public void render(Graphics g) {
        WIDTH = getWidth();
        HEIGHT = getHeight();
        // Clear the Canvas.
        g.setColor(0, 0, 50);
        g.fillRect(0,0,WIDTH-1,HEIGHT-1);
        // draw border
        g.setColor(200,0,0);
        g.drawRect(0,0,WIDTH-1,HEIGHT-1);
        // draw game canvas
        gameManager.paint(g);
    public void run() {
        while (running) {
            // draw graphics
            render(getGraphics());
            // advance to next graphics
            advance(tick++);
            // display
            flushGraphics();
            try { Thread.sleep(mDelay); }
            catch (InterruptedException ie) {}
    public void advance(int ticks) {
        // advance to next game canvas
        gameManager.advance(ticks);
        this.paint(getGraphics());
}Edited by: VANPERSIE on Jul 10, 2012 12:26 PM

Hi Andi,
Thanks for your reply.
Yes, I have waited for a while and the result doesn't change.
The Porblem here is the application is seen started in visual administrator.Only restart brings up the page back.
Can you please suggest anything.
Thanks and regards
Nagaraj

Preview application does not print images correctly sized

The Preview application does not show me what size the image will print out.
It defaults to Scale to Fit: Print entire image.
The % in the Scale: window seems to be what the % turns out to be, depending on which Scale to Fit: is selected.
If I click into Scale:, and then change the %, when I hit Return, it prints immediately without allowing me to preview what size the change actually looks like. Need to change that behavior!!! Can't see how to do it.
Probably want the default setting to be Scale: 100% but can't figure out how to do that.
ALSO the Preferences / Images setting has two choices.
But playing with the Define 100% scale as just changes the size of the image in the Preview viewing window. The PRINT menu still has the same default and the same Scale: % size. No matter which I select, the PRINT default is still the same %.

OR....
https://discussions.apple.com/message/10689391#10689391
choiropiha
Dec 4, 2009 7:48 PM
Preview.app in Snow Leopard has removed the option to print without scaling, and recreating this behaviour with the remaining options is quite complex and requires 4 extra steps. Steps to Reproduce:
1. Open a document in Preview.app, such as a PDF, of a known paper size.
2. Select 'File' > 'Print…'
3. Change the paper size to one where the default scale value with the default 'Scale to Fit:' 'Print Entire Image' is not 100%. This step is often unnecessary, as many documents will require reduction to include margins, even if the paper sizes match.
4. Select 'Scale:'
5. Select the scale % value.
6. Delete the scale value.
7. Input '100' in the scale value box using the keyboard.
8. Press tab to avoid radar #7256827.
9. Click 'Print' Expected Results:
Click on a single option to print at 100%, if by chance that wasn't the default option. This would have been one step. Actual Results:
Does what it says. Steps 4 through 8 are necessary to print at 100% in most cases. Regression:
This behaviour was as expected in OS X 10.5.x and previous versions, or we wouldn't be having this discussion. Notes:
Printing at 100% is the only scaling that is common enough to warrant a button to make it an easy one to get to. Preview.app itself even has an 'Actual Size' toolbar button, but has removed this function for printing.
Graphic designers (and other professionals) or specific applications (such as printing on pre-cut or pre-printed paper, labels, or DVDs) can commonly require printing at 100%, and using PDF to distribute documents makes Preview.app the most logical choice for many printing jobs.
Having something other than 100% as a default can cause expensive media to be ruined by a mis-scaled printout, unless these 4 (+1) steps are followed every time.
Most other apps, including Safari, Mail.app and TextEdit default to no scaling, making Preview.app an exception. I am an architect and this is really annoying!
Does anyone know a workaround?

What action dom i take for this error message "C:\DOCUME~1\user\LOCALS~1\Temp\physics.pdf could not be opened, because the associated helper application does not exist. Change the association in your preferences"?

I get this message when I try to download a pdf file from a website.
"C:\DOCUME~1\user\LOCALS~1\Temp\physics.pdf could not be opened, because the associated helper application does not exist. Change the association in your preferences."
This is a new error. There used to be no problem.

Do you have any setting for MP3 in Tools > Options > Applications ?
You usually need the QuickTime plugin to play MP3 files on Windows because that is the only plugin that supports that file extension if there is no MIME type specified to play the file with another plugin like Windows Media Player or RealPlayer.

HT201250 time machine application does not open

Tried to open Time Machine but the application does not start up.
Software is up to date.
Preferences are set to "on" with oldest backups from November 2011 and plenty of room left on external hard disk unit.
Need some tips or tricks to be able to search a recent backup for missing files.
thanks!

Please try each of the steps below that you haven't already taken.
Step 1
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Click the Clear Display icon in the toolbar. Try again to enter Time Machine. Post any messages that appear in the Console window – the text, please, not a screenshot.
Step 2
Open the backup volume in the Finder. You should see a folder with the name "Backups.backupdb". You should not see a file with a name ending in "sparsebundle". If you do see that, the backup was created over a network and can only be used that way.
Step 3
Launch Disk Utility and select icon of the backup drive in the pane on the left (not any of the volume icons below it.) At the bottom of the window, you should see this:
Partition Map Scheme : GUID Partition Table
If the partition scheme is anything else, the drive has to be repartitioned (with the loss of all data.)
Step 4
In the Finder, select Go ▹ Go to Folder... from the menu bar, copy the text on the line below into the box that opens, and press return:
~/Library/Preferences/com.apple.finder.plist
Move the selected file to the Desktop, leaving the Finder window open for now.
Relaunch the Finder by selecting  ▹ Force Quit... from the menu bar, then selecting Finder and pressing return. Your Finder settings will be lost.
Try again to enter Time Machine. If you still can't, put back the file you moved to the Desktop, replacing the newer one that will have been created in its place.
Otherwise, close the Finder window you opened and delete the file you moved to the Desktop. Recreate your Finder preferences.
Step 5
Boot in safe mode by holding down the shift key at the startup chime. Try again to enter Time Machine.
Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.

Email application does not launch

Hi,
I am using abode reader x, windows 7 & outlook 2010. When I attach a pdf to an email through the abdoe program & press attach, it reads "launching email applciation", but nothing then happens.
Can anyone assist me with this please?
I have already uninstalled and reinstalled and played with the default program settings.
Thoughts?
Thank you.

Thank you for responding.
Yes, outlook is running.
Some additional information:
Outlook & Word 2010. Excel 2000. I have a program that I have to use that is not compatible with excel 2010. I have tried to rename the mapi32.dll to mapi32old.dll, but Windows 7 prohibited me from making that change. I have also have tried to use fixmapi.exe, but the application does not run, despite the fact that I have administrator settings.
I had the exact same configuration on my previous computer (which was new, but returned for other reasons) and I was able to email from word & adobe.

HT1941 Hi i have recently updated my version of iTunes in order to sync music from my macbook air to my new ipod shuffle. After a successful installation the application does not launch and I am unable to oepn iTunes of access my music! Someone please hel

Hi,
I have recently updated my iTunes to the latest version in order to sync music onto my new ipod shuffle. However after a successful installation the application does not launch or open? There are no error messages. The application is just unresponsive.
I have already checked the compatibility with Safari, my operating system and checked my firewall is not blocking it - all is fine.
Does anyone have any other resolutions?
Many thanks

Hi Carolyn,
Thank you for your time and response. The trouble is I am unable to launch iTunes? I have restarted my macbook air a number of times to try and initiate the application but the issue persists and the application remains unresponsive. Will not launch?
Thanks

I cannot download word documents. Error message says assocated helper application does not exist.

Tried downloading word document from email. error message Associated helper application does not exist

To open a document you must have installed an Android application for it. The file is downloaded but can be opened with Firefox, but with the specific app from Android.
Try installing a documents app and for sure it will work.

Deployed application does not contain javascript files

Hello,
I am a unexperienced user of the BPM Studio. When I start my application in Oracle BPM my application does not contain the javascript files. It is quite weird, because the path to the .js files is proper - the application works on other computers. I have observed several weird things:
- when I lookup the application in Firebug, when I try to lookup the source of the .js files, firebug console presents something like this (i deleted most of the html so that it is easy to read):
<html><head><title>Apache Tomcat/5.5.15 - Error report</title>
<body>HTTP Status 404 - /workspace//webRoot/webResources/js/jquery-1.4.2.min.js
Status report message /workspace//webRoot/webResources/js/jquery-1.4.2.min.js
The requested resource (/workspace//webRoot/webResources/js/jquery-1.4.2.min.js) is not available.
<h3>Apache Tomcat/5.5.15</h3></body></html>- as i said - the application works just fine on other computers, without having to edit the path to the .js files
- the application doesn't deploy the application (at least I think it does not) in the OraBPMStudioHome - the application is in the following folder:
C:\Users\<username>\AppData\Local\VirtualStore\Program Files\OraBPMStudioHome\webapps\workspace\webRoot
I am using OracleBPM Studio 10gR3, my system is Windows 7 Proffessional 64bit. Could the fact, that my system is 64 bit, cause the error?
I haven't changed anything in the web.xml, workspace.properties files.
It looks as if the server didn't include my js files. What may be causing this? I tried to locate the folder where the Tomcat Server deployes the application, and copying the js files where they should be manually, but that didn't work out well - the web application still does not see them.
By the way, the double // slashes in the path to the .js file are fine on other computers, but is that proper?
My application uses other scripts, not only jQuery, so changing the link to the jQuery file, won't work.
I'd be very happy for any solution, thanks in advance!
Chris Mejka
Edited by: 789731 on 2010-08-20 01:20

Nope, that's not the case; all the imports are handled by the <fuego:webResources /> tag, like this:
<script type="text/javascript" src="<fuego:webResources relativePath='js/jquery-1.4.2.min.js'/>"></script>If that helps, the folder structure, with the .js files is as follows: ../webRoot/webResources/js/ ....
As I said before - none of my colleagues, who use this application, has this problem, the application runs fine on other computers. The only (or at least that's what I think) difference, is that I use a 64 bit OS... Maybe that's the problem? Or maybe something is wrong in one of my BPM configuration files?
Edited by: 789731 on 2010-08-20 02:29
Edited by: 789731 on 2010-08-20 04:42

TS1702 Live Notes application does not play back the audio.

Similar Messages

Maybe you are looking for