TS1702 only coming up with white screen
my ipod touch 2nd generation 32gb only coming up with white screen. i could hear the click that we hear when the ipod or iphone makes when it get started. then the white screen goes off.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
I have a 4S and in the lock screen it is coming up with a screen (Not Enough Storage - This iphone cannot be backed up because there is not enough iCloud storage available. You can manage your storage in settings) it then has option close or settings.....but i am unable to click on either or turn off the phone. I have plugged it into itunes on the computer and manually backed it up but i cannot use my phone as i cant get past this message
Welcome to the Apple Community.
You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it. -
HT201274 how to restore a iphone with white screen
how i can restore my iphone 3gs with white screen to see if it's can resolve the problem
Plug the device into a computer with iTunes and restore it.
-
Apple Hardware Test Stuck with white screen
hy every one..............
i am unable to start the apple hardware test ,i've done anything ,holding d at start up with inserted installation disk,also with holding c........
also inserted application cd....
apple logo appear and after some time with spinning wheel it stuck with white screen....What that means
please help me out....
what can i do???If you are still using Snow Leopard -
Shut down your computer and disconnect all peripherals (keyboard & mouse if pertinent) from your computer. Now reboot.
If the Mac starts up normally, shut it down again and then plug in one of the peripherals (keyboard or mouse first) and start up your computer again. If it does so successfully repeat the process, adding one peripheral at a time until your Mac acts up. At that point, disconnect the last peripheral you added, reboot your Mac and search the peripheral vendor's website for an updated driver.
If no driver exists or the problem remain after installing the new driver, try a different cable or a different port on your Mac.
If none of the above works, again disconnect all peripherals from your Mac, hold down the "shift" key to start up in "Safe Boot" mode.
If the Mac starts up correctly, restart without pressing the "shift" key.
If your computer still does not start up properly, shut it down and restart it while holding down the Apple+Option-P-R keys; keep holding "all 4 keys" down until you hear the startup sound "twice."
If none of the above work Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
(If Disk Utility cannot repair, you will need a stronger utility (3rd party) - Diskwarrior or Techtool PRO)
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
Remove any 3rd party ram.
Reinstall Snow Leopard - This will install a "fresh" copy of Snow Leopard without archiving old system files but leaves the rest of your files in place.
If your computer is still under warranty or you have Apple Care, take full advantage of it by letting tech support deal with your problems. It's what you're paying them for.
Out of warranty - take the computer to an Apple store or an AASP. Whichever is more convenient for you. -
Computer pauses on startuo with white screen
Why is computer pausing on startup with white screen?
It pauses on the white screen for how long, does it finally go through?
Hold the Shift key down while booting,
run through this list and do #1 - #7
If you get into the machine, then do #9 - #13
Step by Step to fix your Mac -
IMac seems frozen in that following start-up, sun flower just keeps spinning on a blank screen (only Aplple logo on white screen). Turning off and on not helpful. Any ideas?
What iMac is it and what version of OS X are you running?
Try an SMC reset: https://discussions.apple.com/docs/DOC-3603
If that doesn't help, try a Safe Boot: restart holding down the Shift key until you see a grey progress bar - you'll need to input your admin password during boot-up - and once booted, restart as normal from the Apple menu. -
My iPod touch only has a bright whit screen restrain doesn't fix it
My ipod touch only has a bright white screen .Restoring doesnt fix it
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
APP store indicates 1 update. Press "store", "loading" briefly on screen then white screen with updates bar on top. Press updates button in lower right; nothing happens frozen with white screen and still indication 1 update. Other store features and ipod work ok
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>iTunes and App Stores and sign ut and sign back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Also see:
https://discussions.apple.com/thread/4751197?tstart=0 -
Laptop only coming up with a blank screen after set-up?
Ok, so. My parents bought me a brand new hp laptop for christmas. On christmas day i went through the whole set-up process and did all the steps it told me to do. When i'd been through all the steps, i got a loading symbol and ever since, all it comes up with is a blank, black screen and a mouse icon that i can move. I'm not 100% sure of the model though (appologies). What do i need to do??
CheersHello @15_,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your notebook is coming up with a blank screen after setting it up. Is the power on the computer on? Is there an error message on the screen? I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate which operating system you are using; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
TS3274 ipad with white screen only after startup
Just downloaded/installed the latest ios for my iPad and will turn on but stop at a "white scren". It is "stuck" at a white screen with no other functionality ???
Tom-
Try resetting (rebooting) your iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow if it appears. The iPad will restart after a couple of minutes. Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
Fred -
Macbook pro 2009 unibody with white screen and kernel panics
I upgrade to Lion a month or two ago and things have been working fine. A few days ago, I try to wake my computer from sleep and it freezes on a white screen. I reboot only to continue to find the white screen. I hear the chime every time on boot. From then on, I am having different responses on startup.
Initially I could boot to single user mode no problem, but would continue to get white screen on regular boot. I tried to reinstall lion, and on restart midway through install I got the half-gray "you need to restart" kernel panic screen.
Yesterday at apple store, it would not boot to single user, OS select, verbose, etc. modes. They told me it was logic board or hard drive.
Bough a SSD, successfully installed Snow Leopard, and then continued to have similar kernel panics.
Now, replaced originaly harddrive and successfully reinstalled Lion, although got a kernel panic on the halfway reboot (log posted below). Install finished, and now up and running for about an hour. Decided to reboot to check, and big surprise, one more kernel panic. (2nd log posted below).
Is this a logic board? Seems like the HD is not the problem since same issue with a SSD.
Any thoughts greatly appreciated, apply was very unhelpful (I am out of warranty, no applecare). Thanks
Tue Jan 10 12:45:36 2012
panic(cpu 1 caller 0xffffff7f8170904f): NVRM[0/2:0:0]: Read Error 0x00000000: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd4000000 0xffffff80793c0000 0x00000000, D0, P-1/-1
Backtrace (CPU 1), Frame : Return Address
0xffffff807891b710 : 0xffffff8000220702
0xffffff807891b790 : 0xffffff7f8170904f
0xffffff807891b820 : 0xffffff7f817f913c
0xffffff807891b870 : 0xffffff7f817f2d7d
0xffffff807891b8d0 : 0xffffff7f816cb091
0xffffff807891b920 : 0xffffff7f8170d4ac
0xffffff807891b9b0 : 0xffffff7f8170d623
0xffffff807891bbe0 : 0xffffff7f816abce7
0xffffff807891bc40 : 0xffffff7f816ac2de
0xffffff807891bca0 : 0xffffff7f816ac479
0xffffff807891bcd0 : 0xffffff7f8136d773
0xffffff807891bd40 : 0xffffff7f8136c7b8
0xffffff807891bd80 : 0xffffff8000620b0a
0xffffff807891bdd0 : 0xffffff80006541ce
0xffffff807891be30 : 0xffffff80002a31e1
0xffffff807891be80 : 0xffffff8000223006
0xffffff807891beb0 : 0xffffff8000214829
0xffffff807891bf10 : 0xffffff800021bb58
0xffffff807891bf70 : 0xffffff80002ae8a0
0xffffff807891bfb0 : 0xffffff80002d8383
Kernel Extensions in backtrace:
com.apple.iokit.IOGraphicsFamily(2.3.2)[55FF26D3-292D-3B4B-8AB7-1D25C8B4313B]@0 xffffff7f81357000->0xffffff7f8138efff
dependency: com.apple.iokit.IOPCIFamily(2.6.7)[6D54F06A-46B7-37FC-AF22-DE68DC18A1A3]@0xffff ff7f80822000
com.apple.NVDAResman(7.1.2)[3B24E838-5E73-362B-97FA-239F5AEE7D81]@0xffffff7f816 a8000->0xffffff7f81981fff
dependency: com.apple.iokit.IOPCIFamily(2.6.7)[6D54F06A-46B7-37FC-AF22-DE68DC18A1A3]@0xffff ff7f80822000
dependency: com.apple.iokit.IONDRVSupport(2.3.2)[6517D9A6-58F5-3CFC-B021-C882306150D5]@0xff ffff7f8138f000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.2)[55FF26D3-292D-3B4B-8AB7-1D25C8B4313B]@0 xffffff7f81357000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11C74
Kernel version:
Darwin Kernel Version 11.2.0: Tue Aug 9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
Kernel UUID: 59275DFA-10C0-30B3-9E26-F7B5DFB1A432
System model name: MacBookPro5,1 (Mac-F42D86C8)
System uptime in nanoseconds: 44463662103
last loaded kext at 42775461357: com.apple.filesystems.autofs 3.0 (addr 0xffffff7f82011000, size 45056)
loaded kexts:
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.59
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.12.42
com.apple.driver.AppleMikeyDriver 2.1.3f7
com.apple.GeForce 7.1.2
com.apple.driver.AppleHDA 2.1.3f7
com.apple.driver.AudioIPCDriver 1.2.1
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.AppleMuxControl 3.0.16
com.apple.driver.AirPort.Brcm4331 512.20.18
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.5d4
com.apple.driver.AppleLPC 1.5.3
com.apple.driver.AppleBacklight 170.1.9
com.apple.nvenet 2.0.17
com.apple.driver.AppleUSBTCButtons 225.2
com.apple.driver.AppleUSBTCKeyEventDriver 225.2
com.apple.driver.AppleUSBTCKeyboard 225.2
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.0.1
com.apple.iokit.IOAHCIBlockStorage 2.0.1
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.driver.AppleUSBHub 4.5.0
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleAHCIPort 2.2.0
com.apple.driver.AppleUSBOHCI 4.4.5
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleUSBEHCI 4.5.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 167.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1
com.apple.driver.AppleIntelCPUPowerManagement 167.0.0
com.apple.kext.triggers 1.0
com.apple.driver.AppleAVBAudio 1.0.0d11
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOBluetoothSerialManager 4.0.1f4
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAVBFamily 1.0.0d22
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.driver.AppleHDAHardwareConfigDriver 2.1.3f7
com.apple.driver.DspFuncLib 2.1.3f7
com.apple.iokit.IOAudioFamily 1.8.3fc11
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.nvidia.nv50hal 7.1.2
com.apple.NVDAResman 7.1.2
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.driver.AppleHDAController 2.1.3f7
com.apple.iokit.IOHDAFamily 2.1.3f7
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.iokit.IO80211Family 411.1
com.apple.driver.AppleSMC 3.1.1d8
com.apple.driver.IOPlatformPluginFamily 4.7.5d4
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.iokit.IONetworkingFamily 2.0
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.1f4
com.apple.driver.AppleUSBBluetoothHCIController 4.0.1f4
com.apple.iokit.IOBluetoothFamily 4.0.1f4
com.apple.driver.AppleUSBMultitouch 227.1
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.driver.AppleUSBMergeNub 4.5.3
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.1
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.7
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.driver.XsanFilter 403
com.apple.iokit.IOAHCISerialATAPI 2.0.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.1
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IOUSBUserClient 4.5.3
com.apple.iokit.IOAHCIFamily 2.0.7
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOUSBFamily 4.5.3
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 165.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.7
com.apple.iokit.IOACPIFamily 1.4
Model: MacBookPro5,1, BootROM MBP51.007E.B05, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.33f8
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533641465238432D47372020
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533641465238432D47372020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.100.98.75.18)
Bluetooth: Version 4.0.1f4, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS723232L9SA62, 320.07 GB
Serial ATA Device: MATSHITADVD-R UJ-868
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24400000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x04600000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06110000 / 5
** Second Log **
Interval Since Last Panic Report: 1475 sec
Panics Since Last Report: 2
Anonymous UUID: E72F34E2-EBC9-4C62-ADAE-B66EE6704860
Tue Jan 10 13:15:35 2012
panic(cpu 0 caller 0xffffff7f8092404f): NVRM[0/2:0:0]: Read Error 0x00000000: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd4000000 0xffffff8079e79000 0x00000000, D0, P-1/-1
Backtrace (CPU 0), Frame : Return Address
0xffffff807967b710 : 0xffffff8000220702
0xffffff807967b790 : 0xffffff7f8092404f
0xffffff807967b820 : 0xffffff7f80a1413c
0xffffff807967b870 : 0xffffff7f80a0dd7d
0xffffff807967b8d0 : 0xffffff7f808e6091
0xffffff807967b920 : 0xffffff7f809284ac
0xffffff807967b9b0 : 0xffffff7f80928623
0xffffff807967bbe0 : 0xffffff7f808c6ce7
0xffffff807967bc40 : 0xffffff7f808c72de
0xffffff807967bca0 : 0xffffff7f808c7479
0xffffff807967bcd0 : 0xffffff7f8088f773
0xffffff807967bd40 : 0xffffff7f8088e7b8
0xffffff807967bd80 : 0xffffff8000620b0a
0xffffff807967bdd0 : 0xffffff80006541ce
0xffffff807967be30 : 0xffffff80002a31e1
0xffffff807967be80 : 0xffffff8000223006
0xffffff807967beb0 : 0xffffff8000214829
0xffffff807967bf10 : 0xffffff800021bb58
0xffffff807967bf70 : 0xffffff80002ae8a0
0xffffff807967bfb0 : 0xffffff80002d8383
Kernel Extensions in backtrace:
com.apple.iokit.IOGraphicsFamily(2.3.2)[55FF26D3-292D-3B4B-8AB7-1D25C8B4313B]@0 xffffff7f80879000->0xffffff7f808b0fff
dependency: com.apple.iokit.IOPCIFamily(2.6.7)[6D54F06A-46B7-37FC-AF22-DE68DC18A1A3]@0xffff ff7f8083f000
com.apple.NVDAResman(7.1.2)[3B24E838-5E73-362B-97FA-239F5AEE7D81]@0xffffff7f808 c3000->0xffffff7f80b9cfff
dependency: com.apple.iokit.IOPCIFamily(2.6.7)[6D54F06A-46B7-37FC-AF22-DE68DC18A1A3]@0xffff ff7f8083f000
dependency: com.apple.iokit.IONDRVSupport(2.3.2)[6517D9A6-58F5-3CFC-B021-C882306150D5]@0xff ffff7f808b1000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.2)[55FF26D3-292D-3B4B-8AB7-1D25C8B4313B]@0 xffffff7f80879000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11C74
Kernel version:
Darwin Kernel Version 11.2.0: Tue Aug 9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
Kernel UUID: 59275DFA-10C0-30B3-9E26-F7B5DFB1A432
System model name: MacBookPro5,1 (Mac-F42D86C8)
System uptime in nanoseconds: 19032546941
last loaded kext at 16501115458: com.apple.filesystems.autofs 3.0 (addr 0xffffff7f818d1000, size 45056)
loaded kexts:
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.12.42
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleMikeyDriver 2.1.3f7
com.apple.driver.AppleHDA 2.1.3f7
com.apple.driver.AppleLPC 1.5.3
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.1
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.GeForce 7.1.2
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.5d4
com.apple.driver.AppleMuxControl 3.0.16
com.apple.driver.AppleBacklight 170.1.9
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.driver.AppleUSBTCButtons 225.2
com.apple.driver.AppleUSBTCKeyEventDriver 225.2
com.apple.driver.AppleUSBTCKeyboard 225.2
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.0.1
com.apple.iokit.IOAHCIBlockStorage 2.0.1
com.apple.driver.AppleUSBHub 4.5.0
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.driver.AirPort.Brcm4331 512.20.18
com.apple.driver.AppleAHCIPort 2.2.0
com.apple.nvenet 2.0.17
com.apple.driver.AppleUSBEHCI 4.5.0
com.apple.driver.AppleUSBOHCI 4.4.5
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 167.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1
com.apple.driver.AppleIntelCPUPowerManagement 167.0.0
com.apple.kext.triggers 1.0
com.apple.driver.AppleAVBAudio 1.0.0d11
com.apple.driver.AppleHDAHardwareConfigDriver 2.1.3f7
com.apple.driver.DspFuncLib 2.1.3f7
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOBluetoothSerialManager 4.0.1f4
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAVBFamily 1.0.0d22
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.iokit.IOAudioFamily 1.8.3fc11
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.driver.AppleHDAController 2.1.3f7
com.apple.iokit.IOHDAFamily 2.1.3f7
com.apple.driver.IOPlatformPluginFamily 4.7.5d4
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.driver.AppleSMC 3.1.1d8
com.apple.nvidia.nv50hal 7.1.2
com.apple.NVDAResman 7.1.2
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.1f4
com.apple.driver.AppleUSBBluetoothHCIController 4.0.1f4
com.apple.iokit.IOBluetoothFamily 4.0.1f4
com.apple.driver.AppleUSBMultitouch 227.1
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.driver.AppleUSBMergeNub 4.5.3
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.1
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.7
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.driver.XsanFilter 403
com.apple.iokit.IOAHCISerialATAPI 2.0.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.1
com.apple.iokit.IOUSBUserClient 4.5.3
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IO80211Family 411.1
com.apple.iokit.IOAHCIFamily 2.0.7
com.apple.iokit.IONetworkingFamily 2.0
com.apple.iokit.IOUSBFamily 4.5.3
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 165.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.7
com.apple.iokit.IOACPIFamily 1.4
Model: MacBookPro5,1, BootROM MBP51.007E.B05, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.33f8
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533641465238432D47372020
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533641465238432D47372020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.100.98.75.18)
Bluetooth: Version 4.0.1f4, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS723232L9SA62, 320.07 GB
Serial ATA Device: MATSHITADVD-R UJ-868, 5.17 GB
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24400000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06110000 / 5
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x04600000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2Run the Apple Hardware Test:
How to run hardware diagnostics for an Intel Mac
Boot from your original OS X Installer Disc One that came with your computer. After the chime press and hold down the "D" key until the diagnostic screen appears. Run the extended tests for a minimum of two or three hours. If any error messages appear note them down as you will need to report them to the service tech when you take the computer in for repair.
Some "common" error indicators:
SNS - sensor error
MEM - memory error
HDD - hard disk drive error
MOT - fan error
Cannot guarantee that it will reveal anything. As for using the other GPU all I say is you can try switching to it in Energy Saver preferences. -
How to fix facebook page loading with white screen and text on left side
When I log into facebook, there is a white screen with the text displayed on left side of screen. I have tried to delete cache and cookies but page will still not display properly. Please help!
1) First of all '''Download & Install Firefox 3.6.19'''. This version and Firefox 5.0.x are the only Stable and Still Maintained versions of Firefox.
http://www.mozilla.com/en-US/firefox/all-older.html
2) Your User Agent shows that you have the '''Fast Browser Search toolbar''' (Fast Browser Search Make The Web Better - FBSMTWB) installed. This toolbar has been causing many problems in the Firefox 3.6.13+ versions. '''Uninstall''' that extension.
-> Control Panel > Add or Remove Programs. Uninstall "Fast Browser search protection" and "Fast Browser Search" (MyWebTatoo) (My Tattoons) (mywebtattoo.com) (www.tattoodle.com)
-> Files: fast-browser-search.xml, fbstoolbar.jar, fbstoolbar.manifest
http://www.tattoodle.com/uninstall.aspx
See these pages and threads about Fast Browser Search (FBSMTWB in the user agent, Help > About).
* http://www.fastbrowsersearch.com/FBS_Toolbar/Help/helpUninstalling.aspx
* http://www.pccybertek.com/2009/05/remove-fast-browser-search
* http://forums.mozillazine.org/viewtopic.php?f=38&t=1430845
3) After all of that has been done, you can see these links:
-> '''Websites look wrong'''
https://support.mozilla.com/en-US/kb/Websites%20look%20wrong
-> '''Problems using Facebook in Firefox'''
https://support.mozilla.com/en-US/kb/Problems%20using%20Facebook%20in%20Firefox
Check and tell if its working. -
Yosemite update left me with white screen. How do I recover?
Yosemite update from App Store has left me with a white screen and I can do nothing! How do I recover or complete installation?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
Help with white screen on startup PLEASE!
My new imac is only showing a white screen on startup. I am not really confortable with mac's yet to start trying a bunch of different things, I did try a restart where you press four buttons (p and r restart I think).
I made an appt. tomorrow for the mac store. My question to you is, is this a hard drive issue. I have read a little that others have had this problem...did you loose everything on your hard drive?
Thanks guys,
MichelleTo add to the conversation, my iMac has decided not to start up any further than the grey screen with apple logo and scrolling symbol. I haven't a clue what to do with it!
I tried doing a safe boot but that didn't work. I then tried to access the disk utility repair but i upgraded the operating system on my comp to tiger so i don't know if i should be using that cd or the one that came with my computer thus old operating system.
If anyone could shed any light on this i'd be most gratefull.. i hear reports of needing a replacement hard drive.... nooooooooooooo -
ICal corrupted with white screen
I’m running OS10.5.6 on two mac pro’s and using MobileMe to sync my calendars. Last night, I noticed that the iCal screen was entirely white and frozen on my home MacPro and had to force quit. I restarted the Mac. It seemed ok last night but today it is having the same problem as my office MacPro: Today I got the white screen on opening iCal. I tried some obvious things like repair privileges and the like, but finally unsubscribed to MobileMe and then resubscribed. That didn’t fix it so I trashed whatever I could from my user Library preferences folder that contained iCal in title, and unsubscribed to MobileMe and then resubscribed. That didn’t work, so I then trashed my Calenders folder in my library and iCal files in my Preferences folder; and unsubscribed to MobileMe and then resubscribed. Every time I resubscribed I restored data from MobileMe site to local computer. I’m still having the same problem:
1. iCal screen is incomplete and sometimes goes blank
2. To Do Items are not visible.
3. If I open iCal preferences, and then try to close by clicking red ball, it won’t close. I then have to quit or force quit iCal to get rid of the preference window.
Something is obviously corrupted but it’s strange that it’s occurring on 2 separate computers. The only think in common is MobileMe.
Suggestions appreciated.
thanksI have been investigating this problem and have the following info and a "pseudo-fix"
1. This happened on 3 different macs when syncing with or replacing with MobileMe calendar/address book. As noted above by others, sometimes I get a white screen but usually month calendar (which can't be edited) and empty side bars; I can't move to other months. It appears that iCal is freezing on loading/drawing calendar.
2. Syncing to my iPhone works ok and reminders do come up on my Mac so iCal seems to be working but just not drawing the screen.
3. Address book works fine
4. If I delete Calendars folder in library and iCal preferences, restart, and then sync with MobileMe, iCal works ok initially but within a day the problem recurs even if not connected to internet. Apple tech said that my iCal must be corrupted, but I think not due reason discussed below in item 5.
5. If I make a clean new user, and sync with MobileMe, then iCal works. I have done this now for over a month and it's stable. Curiously, I did try moving the Calendars folder from the library of my standard user to the new user library folder, and iCal froze up. I deleted the user and made another bare new user and iCal is working ok on several macs.
6. I think that some app is interfering with iCal in my stander user. e.g. I run Quickeys and variety of other stuff, and this is not running in the new "bare" user. I also have adobe CS3 (and 4), MSO 2008, VPN, Skype, etc. etc. so I have no idea which app is conflicting or how.
7. As far as my "pseudo-fix", I enter new events via Safari directly into MobileMe and then sync with my macs. This will give me reminder-alarms and allows syncing with iPhone. Every so often (maybe 1-2x per week), I log into my new user account, sync with MobileMe, and then add alarms to needed events in iCal (I haven't figured out how to do this in Safari).
8. I suspect that Apple will quietly fix this bug in a future update and the problem will go away - this is typically what this "infallible" company does so they don't have to admit a problem. My current setup works but it's a hassle and I wish I had not abandoned Now-Up-To-Date, but I don't want to re-enter a bazillion events into a new calendar program.
9. I need to keep a record of past events: I did output the calendar as a pdf so if I ever decide to abandon MobileMe and iCal, I will at least have a record.
Hope this helps
Maybe you are looking for
-
Anchor a button upper right in a panel?
Have to anchor a button upper right in a panel. Need it to stay anchored even when I use resize and move effects on the panel. Want the button up top, not in the panel's content pane. The only way I know to get a button up there is to put it in the
-
Hi , We are trying to schedule the OWB 3i mappings using OEM 2.2 and Workflow 2.6.2.We have a queue listener 'workflowqlsnr.bat' on the client side,but we need to have the Workflow Queue Listenter on the Server side.Please let me know what is the pro
-
Retrieve system information using BAPI's
Hi, I want to know if we can retrieve SAP information like : 1) System name, sid, system number,db schema etc. 2) Implemented CRM processes like sales, services etc. in CRM 3) Netweaver component like BW, MI etc. using BAPI's / RFM... Please help..SA
-
Hey all, I would like to know how can I read a template´s information to know if it is a pattern macthing or a geometric matching template? In my code, users provide templates and the algorithm must match them using pattern matching or geometric mat
-
stock Transfer orders once we create PO and delivery for a plant abroad we file custom invoices to custom authorities. However if price of material or tranfer price margin changes in between, the intercompany invoice gets a different value. It causes