TS1702 Problem with app called six guns juddering, I am playing it on ipad 4 any solutions. Thanks

I have an app called six guns which I am playing on the new ipad 4 retina display, ios 6. It is juddering so is there a solution. Anybody know ? Thanks.

You can try this:
Make Sure iOS is updated to the latest version
Reboot the device by pressing and holding down the home and sleep/wake buttons (power) at the same time until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings

Similar Messages

  • TS1702 Problem with App Store & Newstand

    When I tap the App Store icon on my iPad it opens the newsstand store instead, any ideas for solutions - I have tried closing the app and restarting the iPad.

    Keep the Powerbutton and the Homebutton pressed at the same time until you see the Apple logo on your screen.

  • I have a problem with app store , they say my credict card security code is incorrect but it's correct

    I have a problem with app store , they say my credict card security code is incorrect but it's correct

    Did you check to see if your credit card has expired or has been frozen? My dad bought some hardware from Canada and it froze his card because it was an out of the country purchase. He called the bank and they turned it back on.

  • Problem with app The App Store is temporarily unavailable. Please try again later.

    I have Problem with app Store did conect say is temporarily unavailable.

    I'm having the same problem here for the past day or so. I even checked my firewall settings and everything seems to be fine. Can anyone help us?
    Message was edited by: BevGB

  • Problems with a call transaction

    Hi, I'm having some problems with a call transaction and I cannot understand why. I put A in the mode, and I am seeing the dynpros and I am pressing enter it works perfectly but when I use mode N it tells me that there is not information for one of the dynpros and it doesn't work. Does anybody know the problem and how to solve it??
    Thanks in advance

    Hi,
    First of all thank you very much for your time.
    I am using FB05 and the problem is in dynpro SAPLKACB 0002, and it says that batch input data doesn't exist. Here is the code, maybe you can see what is happening
    LOOP AT t_resumen WHERE belnr = t_batch-belnr AND
                                ( contador = 3 OR contador = 4 or CONTADOR = 5 ).
          READ TABLE t_clave WITH KEY belnr = t_resumen-belnr.
          d_clave = t_clave-bschl.
          i = i + 1.
          CASE i.
            WHEN 1.
              PERFORM bdc_dynpro  USING 'SAPMF05A'    '0700'.
              PERFORM bdc_field   USING 'BDC_OKCODE'  '/00'.
              PERFORM bdc_field   USING 'RF05A-NEWBS' t_resumen-bschl.
              PERFORM bdc_field   USING 'RF05A-NEWKO' t_resumen-hkont.
              PERFORM bdc_field   USING 'BDC_OKCODE'  '/00'.
              PERFORM bdc_dynpro  USING 'SAPMF05A'    '0300'.
              PERFORM bdc_field   USING 'BDC_OKCODE'  '/00'.
              j_wrbtr = t_resumen-wrbtr.
              REPLACE '.' WITH ',' INTO j_wrbtr.
              PERFORM bdc_field   USING 'BSEG-WRBTR' j_wrbtr.
              PERFORM bdc_dynpro  USING 'SAPLKACB'    '0002'.
              PERFORM bdc_field   USING 'BDC_OKCODE'  '/00'.
            WHEN t.
              PERFORM bdc_dynpro  USING 'SAPMF05A'    '0300'.
              PERFORM bdc_field   USING 'RF05A-NEWBS'  t_resumen-bschl.
              PERFORM bdc_field   USING 'RF05A-NEWKO'  t_resumen-hkont.
              PERFORM bdc_field   USING 'BDC_OKCODE'  '/00'.
              j_hkont = t_resumen-hkont.
              j_clave = t_resumen-bschl.
              PERFORM bdc_dynpro  USING 'SAPMF05A'    '0300'.
              PERFORM bdc_field   USING 'BDC_OKCODE'  '=BU'.
              j_wrbtr = t_resumen-wrbtr.
              REPLACE '.' WITH ',' INTO j_wrbtr.
              PERFORM bdc_field   USING 'BSEG-WRBTR' j_wrbtr.
              PERFORM bdc_dynpro  USING 'SAPLKACB'    '0002'.
              PERFORM bdc_field   USING 'BDC_OKCODE'  '/00'.
            WHEN OTHERS.
              PERFORM bdc_dynpro  USING 'SAPMF05A'    '0300'.
              PERFORM bdc_field   USING 'RF05A-NEWBS'  t_resumen-bschl.
              PERFORM bdc_field   USING 'RF05A-NEWKO'  t_resumen-hkont.
              PERFORM bdc_field   USING 'BDC_OKCODE'  '/00'.
              j_hkont = t_resumen-hkont.
              j_clave = t_resumen-bschl.
              PERFORM bdc_dynpro  USING 'SAPMF05A'    '0300'.
              PERFORM bdc_field   USING 'BDC_OKCODE'  '/00'.
              j_wrbtr = t_resumen-wrbtr.
              REPLACE '.' WITH ',' INTO j_wrbtr.
              PERFORM bdc_field   USING 'BSEG-WRBTR' j_wrbtr.
              PERFORM bdc_dynpro  USING 'SAPLKACB'    '0002'.
              PERFORM bdc_field   USING 'BDC_OKCODE'  '/00'.
          ENDCASE.
            READ TABLE t_porcentajes WITH KEY gjahr = t_resumen-zzbad
                                           zzbtd = t_resumen-zzbtd.
            IF j_hkont = t_porcentajes-cfacpr.
              PERFORM bdc_field   USING 'COBL-PRCTR' t_porcentajes-prctrfac.
              PERFORM bdc_field   USING 'COBL-ZZBTD' t_resumen-zzbtd.
              PERFORM bdc_field   USING 'COBL-ZZBAD' t_resumen-zzbad.
            ELSEIF t_resumen-hkont = t_porcentajes-cadmin.
             PERFORM bdc_field   USING 'COBL-KOSTL' '20801'.
            ELSEIF t_resumen-hkont = t_porcentajes-creca.
             PERFORM bdc_field   USING 'COBL-KOSTL' '20401'.
            ELSE.
              IF d_clave = 01 OR d_clave = 04 OR d_clave = 40 OR d_clave = 09.
                IF j_hkont >= 424001 AND j_hkont <= 424005.
                  PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
                ELSEIF j_hkont >= 424601 AND j_hkont <= 424605.
                  IF j_clave = 40.
                    PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
                  ENDIF.
                ENDIF.
              ELSEIF d_clave = 11 OR d_clave = 12 OR d_clave = 14 OR d_clave = 50.
                IF j_hkont >= 424001 AND j_hkont <= 424005.
                  PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
                ELSEIF j_hkont >= 424601 AND j_hkont <= 424605.
                  IF j_clave = 50.
                    PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
                  ENDIF.
                ENDIF.
              ENDIF.
    *Fin modificacion marzo 2007.----
              PERFORM bdc_field   USING 'COBL-ZZBTD' t_resumen-zzbtd.
              PERFORM bdc_field   USING 'COBL-ZZBAD' t_resumen-zzbad.
              PERFORM bdc_field   USING 'COBL-ZZBTT' t_resumen-zzbtt.
              PERFORM bdc_field   USING 'COBL-ZZBTU' t_resumen-zzbtu.
              PERFORM bdc_field   USING 'COBL-ZZBTS' t_resumen-zzbts.
              PERFORM bdc_field   USING 'COBL-ZZBAG' t_resumen-zzbag.
              PERFORM bdc_field   USING 'COBL-ZZBRE' t_resumen-zzbre.
              PERFORM bdc_field   USING 'COBL-ZZBC8' t_resumen-zzbc8.
              PERFORM bdc_field   USING 'COBL-ZZBC9' t_resumen-zzbc9.
            ENDIF.
        ENDLOOP.

  • Problems with APP World

    Just got back into the Curve from a WM phone and I forgot how easy this phone is to use!!! Having a problem with App world though. I;m receiving an error message stating I'm unable to connect to the server. Anyone have any suggestions on how to rectify the problem? I'm sure it's a super easy fix and I'm just missing it online somewhere. Thanks!

    Here's a few steps I've recommended that have worked for some...
    There have been some issues with the AppWorld services lately...most are reported to be cleared up. Please try again. Also, please try removing and re-installing AppWorld...some have reported that to be helpful. In addition...RIM has released AppWorld version 1.1.0.15...it is highly recommended to be on that version.
    Also please try a hard reset: With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    In addition, you can try this sequence:
    1) Remove AppWorld from your BB (Homescreen > Options > Advanced Options > Applications) -- if it requests that you reboot the BB, do so.
    2) Do a Batt-Pull reboot as described above.
    3) Get a new link and install a fresh copy of AppWorld
    http://na.blackberry.com/eng/services/appworld/download.jsp#tab_tab_download
    Again, if it requests to reboot, do so.
    4) Do another Batt-Pull reboot
    5) See if it now works.
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT204152 hello i have a problem with app store cant download program get this error verification required and no accept my visa card

    hello i have a problem with app store cant download program get this error verification required and no accept my visa card

    what i can start to download and updated programs

  • I HAVE PROBLEM WITH APP STORE

    I HAVE PROBLEM WITH APP IN APP STORE, IN MY APP STORE I HAVE MANY PURCHASED APPS, BUT NOW I DON'T HAVE ANY PURCHASED IN MY ACCOUNT,WHAT IS PROBLEM
    BEST REGARDS!!

    Likewise. I have over 1000 apps that I've downloaded. and my screen just shows this:
    So it's a global issue for sure. I'm sure Apple is aware of it.

  • Does anyone has problems with Apps store whenever u rotate the ipad the 4th generation?

    Hi,
       I have problems with Apps Store whenever I rotate the device it will just auto exit from the apps store and back to home screen.

    Try a rest: Simultaneously hold down the Home and On buttons until the iPad shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the iPad back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.

  • Strange problem with App Id on developer account

    Hi,
    I have very strange problem with App Id on developer account.
    We have uploaded one project with App Id(com.yourcompany.app) and its ready for sale now. Now we have to release update for this application but we could not find that App Id(com.yourcompany.app) on developer account. But strange is that i could not see delete option for App Id.
    If i try to create new App Id with com.yourcompany.app name then it shows that it is already being used please select any other name.
    Does anyone has faced this type of problem.
    Regards,

    You shouldn't need to enter the App Id when updating your app. Could you please describe the page in which you're asked for the App Id, and describe how you got to that page?
    For example, if I wanted to update Version 1.2 of Ray'sApp, I would log into ITC, then click on +Manage Your Applications+ to get to the "Manage Your Applications" page. On this page I see the icon for every app I have in the store. I then click on the icon for Ray'sApp 1.2 to get to the page titled "Ray'sApp". Next I click the 4th selection to the right on that page: +Update Application+, click No and Continue on the "Export Compliance" page, and get to the "Upload Application" page. On that page I fill in Version Number: 1.3, Language English, Name: Ray'sApp, Keywords ..., What's New in this Version: ..., and the Apple Content Descriptions table. Then I upload the binary.
    Following the above example, show us how you got to a step that requested the App Id. Else you might refer to Page 86: Version Updates in the iTunes Connect Developer Guide. In that case, please explain how your update experience differed from the steps in the Guide.
    \- Ray

  • HT4623 Problems with apps updates

    Problems with apps updates

    OK
    Do you have a question?
    If so, then explain your issue in much more detail than "Problems with apps updates" and ask it

  • Hello, I have problems with app store Your payment method is not valid in this Store. Please enter a new payment method. Could you help me, please?

    I have tried 3 cards already but still the same problem with app store Your payment method is not valid in this Store. Please enter a new payment method.
    Is there any ways to solve the issue?
    Thank you in advance for your help!

    If you still have problem, contact iTune Support
    https://ssl.apple.com/emea/support/itunes/contact.html

  • I have problems with outgoing call no audio, only works with speaker. I bought my iphone on december 2011.

    I have problems with outgoing call no audio, only works with speaker. I bought my iphone on december 2011.

    Had the same problem, no audio on incoming or outgoing calls and only could hear the conversation of the call if I put on speaker. It seemed to start after I did a recent IOS update this past month. I tried restart, reset and restore of my iPhone but nothing changed. It appears not to be a software issue but a hardware problem. I got my phone this past summer so it was still under warranty and got it replaced.

  • Problem with 5800, call processing is too slow.

    i have a problem with rejecting calls and recieving as well as dialling. it takes to much time to process. when a caller calls me they hear the dial tone for about 5 seconds then i get the call on my phone.. when i use third party software for automatic rejecting calls, the caller hears the dialtone for like 10 seconds or more then it gets rejected which is really annoying. please help me. is there a solution for this? this is not the network problem coz my sim n rejecting calls on other phones work fine. AND ALSO wen someone calls me i get the call alert like after 10 seconds, its very slow!!

    Make sure you have upgraded to 1.1.1 which fixes volume problems.
    Note that it will NEVER be as loud as standard cell phones but it should improve the volume so you have no problem hearing it in the car.

  • Setting always changes by itself in my iPhone 5s, also every few calls I have to face a problem with a call without sound

    Setting always changes by itself in my iPhone 5s, also every few calls I have to face a problem with a call without sound, battery becomes empty quickly

    User troubleshooting steps as outlined in the manual are reset, restore, restore as new. Have you tried any of these?

Maybe you are looking for