TS1702 "Purchased Problem" for "The Economists" on Ipad/Iphone

Hi there,
I have a problem redarding to the purchase of "The Economists".
I have purchased "The Economists" on my Iphone, but I wrongly clicked the purchase button twice on my Ipad since it did not come as it did on my Iphone. I don't know why but, my credit card account says that the Itunes had charged me for this. I cannot understand why I cannot read it on Ipad since it did not say anything as such restrictions.
Thank you for your patience.
Zhangxingxing

You haven't changed country since buying it ? Have you tried logging out and back into your account on your device ? Are the apps hidden : http://support.apple.com/kb/HT4919 ?

Similar Messages

  • Hi team , I have some questions/Problem for my product apple (iPad,iPhone) , I want to employee speak and type thai language

    Hi team , I have some questions/Problem for my product apple (iPad,) , I want to employee that can  speak  or response me in thai language
    1. ผม อาคเนย์  พำนักอยู่ประเทศไทย กรุงเทพฯ  มีปัญหาสอบถาม ดังต่อไปนี้
       - กระผมได้ทำการตัดบัตร เครดิต เพื่อซื้อเกมส์ผ่าน itune store ผ่าน apple itune ID : misskor.yaprom@*** เพื่อซื้อเกมส์ Eleves Realm ในวันที่18 ก.ค. 56 เวลา 17.07น. ซึ่งทางบัตรเครดิตได้แจ้งเรียกเก็บเงินมายอดเงิน 39.99$ ซึ่งในระบบจริงๆ ทางกระผมต้องการตัดในยอด 99.99$ แต่พอได้ประสานงานไปยังธนาคาร ได้รับการแจ้งกลับมาว่า ได้ทำการตัดบัตรในยอดเงิน 39.99$ ซึ่งในความเป็นจริงนั้น กระผมไม่ได้สั่งซื้อเกมส์ในยอด 39.99$ ซึ่งในยอด 99.99$ นั้นพยายามตัดในระบบบัตรเครดิตอยู่ แต่ทางกระผมได้ยืนยันกลับไปว่าไม่ให้ระบบตัดนะครับ เพราะว่าเนื่องจากมีปัญหาในการชำระเงินระหว่าง Apple itune store อยู่
       - ทั้งนี้ขอให้ทางเจ้าหน้าที่ประสานงานตรวจสอบ apple itune ID : misskor.yaprom@*** เพื่อซื้อเกมส์ Eleves Realm ตามที่ได้ให้รายละเอียดโดยด่วนว่าเป็นเพราะว่าระบบมีปัญหาหรือว่ามีอะไรเกิดขึ้นในข ั้นตอนการชำระเงินครับ
    รบกวนประสานงานกลับมายังกระผม อาคเนย์ ที่หมายเลขโทรศัพท์มือถือ +**** / reply feedback  email : lekod1@*** โดยด่วน ในวันศุกร์ที่ 19 ก.ค. 2556 ครับ
    ขอบคุณครับ
    อาคเนย์  อุดปิน
    กด
    <Edited By Host>

    Google translation:
    พนักงานของ iTunes Store จะไม่ได้อ่านข้อความในเว็บบอร์ดนี้ ถ้าคุณต้องการความช่วยเหลือสำหรับปัญหาที่มีใน iTunes Store, คุณจะต้องติดต่อกับพวกเขาผ่านทางแบบฟอร์มเว็บนี้:
    http://www.apple.com/emea/support/itunes/contact.html

  • I  have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7  PC. For several years, I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months

    I  have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7  PC. For several years,
    I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months ago I decided to use Mobile Me. However, there were problems with duplication of calendars and then “rogue events” – which could not be deleted – even if deleted on Outlook and on the iPhone (or both at the same time) – they would just reappear after the next synchronisation.  All other synchronisation areas (eg Contacts, Notes etc) work fine.
    I have looked for help through the Apple Support Community and tried many things.  I have repaired my Outlook. I have repaired my .pst file in Windows. I have re-installed the latest version of iTunes on my PC. I have re-installed the firmware on my iPhone. I have tried many permutations on my iPhone. I have closed down all Mobile Me functions on the iPhone. I have spent upwards of 24 hours trying to solve this problem.
    What am I left with? Outlook works seamlessly on my PC. My iPhone calendar now has no events from  my calendar, but does not synchronise through iTunes. Nor does it send events initiated on the iPhone to the Outlook. I am at the point of abandoning iPhones and iPads altogether.  I need to have a properly synchronising calendar on my phone.  Do you have any suggestions?

    In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery.   (from memory, so exact wording may be off)
     The lower the numbers you use there, the longer the battery *should* last.    These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
    --- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine

  • I have a password protected Numbers document I created on my MAC and share via DROPBOX. Is there any way to simply view this doc on my IPAD without purchasing NUMBERS for the IPAD?

    I use NUMBERS on my MAC to create a password protected document.  I share this doc via DROPBOX.  Is there any way I can view the doc on my IPAD without purchasing NUMBERS for the IPAD?  The doc opened fine on the IPAD before protecting it with a password.

    Using the term "opened" may have been incorrect on my part.  Before password protection, I simply viewed the doc by selecting it within my DROPBOX app.  No revisions could be made, but I could view the doc.    Now, with the doc password protected, the IPAD states this file can not be viewed.
    The IPAD users guide gives a list of files IPAD can view. Unfortunately, I find no info on how to open/view that file should it be protected. If
    THANKS

  • I bought an new ipad 3rd gen 16 gb wifi cellular in may 2012. I hv a unique problem wherein the screen of ipad is not as smooth as what is general experience. Its not buggy but lacks smoothness and finger doesnot glide as smoothly . Can anybody help.

    i bought an new ipad 3rd gen 16 gb wifi cellular in may 2012. I hv a unique problem wherein the screen of ipad is not as smooth as what is general experience. Its not buggy but lacks smoothness and finger doesnot glide as smoothly .Can anybody help.

    Do you clean your iPad screen?  Do not use standard window cleaners, with ammonia or alcohol, like Windex, but a damp towel, followed by a micro-fibre cloth is recommended.  There are also cleaners you can buy which are specifically designed for iPad/iPhone devices, such as iClean from Monster.

  • TS3297 What do I do if music files purchased/downloaded for the iTunes store don't work properly?

    What do I do if music files purchased/downloaded for the iTunes store don't work properly?

    Buddhabeat...clicking on the "Report a Problem" button next to the song(s) in question, should open a drop-down list menu, that allows you to select the specific issue/area of concern that you are experiecing (or you can select a generic "My problem is not on the list" (or something to that effect). Underneath this drop-down menu box, there should be another message box where you can describe  the issue/problem your having. Below this message box will be a "Submit" button...clicking on that will send your message to the Apple iTunes Store Customer Support Centre (you will see a confirmation message that your message has been sent), as well as receive an email notification from the Support Centre confirming your message has been received, a case number, and that you will receive an email response pertaining to the issue/problem you're having, from the Support Centre asap (usually within 24 hours). That's how it worked for me, anyhow.

  • HT201359 I purchased gems for the game bingo and they are not there however I received my receipt to my email stating its paid for and it says it is gems purchased for the game pet story but they are not there either..how can this be corrected?

    I purchased gems for the game bingo but they are not there however I received the bill to my email stating its paid and it shows it was gems purchased for the game pet story but the gems are not there either. How can I correct this problem?

    Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though

  • Creating a Purchase Order for the Asset

    Hi,
    Please see the following steps:
    1.Create a purchase order for the asset.
    2. Post a goods receipt from this PO.
    3. Quantity of asset will be transfered from goods receipt.
    But I find quantity of asset(AS02) was not be transfered and still was equal to 0.
    Could you help me?
    Thanks and Regards,
    Colin.

    see the field status varient for the gl account see the qty field is optional field or not
    and check in the asset group also qty field is the optional field
    Assign point if useful
    Regards
    A.k

  • MRP creating additional purchase requisitions for the existing sales order

    Hi,
    We have scenario where we switch materials from POD material to ARP material. POD material is just like make to procurement which creates purchase requisition and purchase order upon saving the sales order. ARP (Auto replenishment) material creates purchase requisition based on sales order and re-order point while running MRP.
    When the material is POD title, it created purchase requisition and purchase order (example: 4500000110) while saving the sales order (example: 1000000010) for the quantity 10. After some time this material is switched to ARP and it has open sales order (1000000010) and purchase order (4500000110).
    We have special MRP run for ARP materials based on MRP type, which creates purchase requisition.. What is happening is when we run MRP; it is creating new purchase requisition for the old sales order (1000000010) for the quantity 10. But old sales order (1000000010) is already having purchase order (4500000110) to fulfill. So we donu2019t want to create new purchase requisition for the old sales orders. It should create purchase requisition only for new sales orders.
    Please advise
    Thanks in advance
    Srinivas

    Mangesh,
    If the components are Inhouse production then you can think of using collective orders by assigning special procurement key 52. If raw material exists then your requirement cannot be met..as i think your scenario is of assembly processing. The idea of assembly processing is that component materials will always be available and only assembly will be done based on Sale Order.
    Regards,
    Prasobh

  • Purchase order for the new license

    We sent the purchase order for the new license to Oracle on last Friday
    yet to receive the new CSI for the new server .
    can we still move forward with deployment activity and later specify the CSI
    or would that stop us suring the install process if we don't have yet the CSI ?
    Kindly help me .
    If you have any idea any metaline node pls let me know ..
    Thanks an addvance..
    j2vinod

    user11197404 wrote:
    We sent the purchase order for the new license to Oracle on last Friday
    yet to receive the new CSI for the new server .
    can we still move forward with deployment activity and later specify the CSI
    or would that stop us suring the install process if we don't have yet the CSI ?
    Are you asking from a technical or legal standpoint?
    If technical, do you see anything in the installation instructions that mention entering license information? What happens if you try to go ahead and install? What could be the worst that could happen?
    >
    Kindly help me .
    If you have any idea any metaline node pls let me know ..
    Thanks an addvance..
    j2vinod

  • Hello. I have an iPad2, and iMovie software. My main problem, for the moment, is the length of the videos: I can´t create a video with more than 56 seconds. When I try, the app shuts off... Can anyone help me?

    Hello. I have an iPad2, and iMovie software. My main problem, for the moment, is the length of the videos: I can´t create a video with more than 56 seconds. When I try, the app shuts off... Can anyone help me?

    Sorry. We can't help you. It's no longer an iPhone. Apple won't touch it.
    Take it to whoever replaced the screen and see if they can help you.
    iPhones are not user servicable and Apple does not sell iPhone parts at all. I'd be surprised if you were actually able to back it up at this point. It sounds like it's completely borked.

  • If I purchase PS for the $9.99 per month plan, will I be able to install / use on more than 1 computer?  (i.e. office and home)

    If I purchase PS for the $9.99 per month plan, will I be able to install / use on more than 1 computer?  (i.e. office and home)

    Yes, the subscription license allows for working installations on two machines.

  • Is Verizon reducing $100 for the first generation iPad?

    Is Verizon reducing $100 for the first generation iPad?

    Hi Manaka,
    We are not currently aware of any price reduction of $100.00 on the current Ipad. Please check the Verizon Wireless website for current pricing and discounts as pricing is subject to change without notice. I am providing a link for further information.
    http://www.verizonwireless.com/b2c/store/controller?&item=phoneFirst&action=viewPhoneOverviewByDevice&deviceCategoryId=11
    Thank You,
    edw@vzwsupport

  • Purchase order for the Invoice

    Hi,
    Iam an ABAP er can any one guide me to find the purchase order for the Invoice posted please help me out with some tables related to this

    Hi Karthick,
    If you want to get material doc - invoice doc pairs I think you can use table EKBE.
    (http://www.erpgenie.com/abap/tables_mm.htm)
    BR
    Csaba

  • Quation rejected but i can issue purchase order for the rejected.

    hi, i have several issues to be solved
    i rejected a quotation but i can issue purchase order for the rejected quotation..
    q1:  why SAP  had given that option?
    q2:How do i restrict user to issue purchase order for rejected quotation?
    q3: what i observed was , accepting the quotation entirely lies with user.so what is the criteria for accepting the quotation.. Is it just the price?? If it is the just price then How do i restrict the user to go always for low price quotation?
    thanks in advance,
    regards,
    srini

    In SAP R/3, RFQ comparision is done on the basis on price only.( including excluding discounts, delivery cost....).
    In true business scenario, lowest cost is not the best solution. There are other qualitative parameters which needs to be considered for taking final decision. These factors can be different for different type of purchases. e.g. for capital goods what is the life of equipment. Total cost simulation is done outside system & PO is created with reference to best fit quote.
    In SRM, we can define parameters against which we can evaluate the quote within the system.
    Hope this is helpful.
    Thanks
    Ashutosh

Maybe you are looking for

  • External USB Drive very slow to Mount

    Hi, I have an iBook G4 and I recently bought an 80GB external USB 2.0 drive. The problem I am having is that it takes a long time for the drive to mount. After I plug it into the USB port it takes 2 - 5 minutes for it to actually show up on my deskto

  • Licensing of a Test SQL Server

    Hi, My question is regarding the use of SQL in a Development Environment. We have a VL Agreement. We have a Historical server using SQL in a 2 server cluster with a SAN. We purchased a SQL 2012 Standard Server for each server plus CAL's for all devic

  • SGD 4.31 upgrade error .. now what

    Here's after installing Linux machine - everything looked good - prepped the production server for upgrade this evening/now am - dismantle ..pkgadd - going through the steps ..... I'm doing some investigating ... These dir's/fiels didn't get installe

  • Sso, rfc, ws

    hi, i wanted to ask you, how to setup single sign on authentication between two abap SAP systems. My infrastructure looks like this: portal -(single sing on login)-> sapGUI abap system(NW 7.1) -(RFC)-> other abap system. how should I setup the rfc ca

  • What is the Collection that returns and removes the Object simultaneously

    Hi Java Experts, I believe I'm looking for a Collection that will allow me to (a.) return an object and (b.) remove the object from the collection simultaneously (c) without having to specify the index location of the object. Very similar to what you