TS1702 setting for what chat or internet connection through 3G

I can use internect and whatchat now in locations without Wifi  service. Such occurence happened only after I reset my I phone to enable it to use Wifi service.
I want to use both services in all situations.
I think that there must be something wrong with my Setting.

HI and Welcome to Apple Discussions..
Sorry to tell you this but Norton anti virus software can actualy damage a hard drive.
Read the second post here by: "Klaus"1
http://discussions.apple.com/thread.jspa?messageID=10399395&#10399395
There are no Mac viruses in the wild... it's not a virus.
Before you erase the hard disk and reinstall the Mac OS X, run Disk Utility from your install disk.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 10% to 15% free disk space*
If the hard disk appears to be ok and there's plenty of free disk space then do the Erase and Install, instructions here...
http://support.apple.com/kb/HT1544
Make sure and back up all important data BEFORE doing this.
If you are running Leopard, the most recent version is 10.5.8.
Carolyn
Message was edited by: Carolyn Samit

Similar Messages

  • Setting NAT to disabled breaks internet connection

    Hello when i set NAT to disabled my internet connections does not work. Why is that?  When NAT is disabled what attacks do i leave my self open to? My ultimate goal is to run three xboxes with open NAT setting, how do i do this? the details of my network are below.
    Modem --> WRT610n
    (everything is using statis IP)
    my desktop is plugged into the router via ethernet cable
    Wireless devices:
    3 xboxes
    2 Desktops
    1 laptop
    we are trying to get all three xboxs running with open NAT how do i do this?

    Why would you disable NAT? NAT is required to allow systems with Private IP Addresses to access the internet. For instance, if your PC has an IP Address of 192.168.1.50 it needs NAT to convert this non routable private IP address into something that is routable on the internet. NAT is designed to allow multiple systems within the private IP space to access the internet. Also, for systems that are not acting as 24/7 "Servers" why use static IP addresses? DHCP, when set up properly, eliminates user error by automatically entering the necessary information to allow workstations and game consoles to access the internet. No offense, but if you don't understand NAT and private vs. public IP addressing, you probably shouldn't be entering information into a static IP address config screen...The XBOX saying you have "Moderate" or "Strict" NAT has nothing to do with DHCP vs. Static IP.
    Open NAT should work correctly if UPNP is enabled on the router. If it doesn't, you can try opening the ports like the previous responder suggested but it shouldn't be neccessary.
    The router does allow for ONE IP address on your internet network to act as a "DMZ Host" which will bypass NAT and give that device unfiltered internet access but you will not be able to have 3 DMZ host devices. 

  • Whats a faster internet connection joining one or create one.i have one ps3 i imac 2 ipads and one macbook pro?

    whats a faster internet connection joining one or create one.i have one ps3 one imac 2 ipads and one macbook pro?

    For the AirPort Extreme Base Station to provide Internet access to network clients, it would need to be configured for: 1) Connection Sharing = Share a public IP address, and 2) Wireless Mode = Create a wireless network.
    Although the option: Wireless Mode = Join a wireless network, exists for the Extreme, it really serves no purpose and should not be used.

  • I have a PC with a internet connection through a modem and ever since i have had it i have had no connection to the itunes store. And even if I try to update anything it says that i need to check my connection, but my connection is fine. What should I do?

    I have a PC with a internet connection through a modem and ever since i have had it i have had no connection to the itunes store. And even if I try to update anything it says that i need to check my connection, but my connection is fine. What should I do?

    This almost always indicates your firewall or anti-virus utilities are preventing iTunes from contacting the iTunes Store. Here is an exerpt from "Can't connect to the iTunes Store": http://support.apple.com/kb/TS1368
    Troubleshooting on Windows
    If you haven't been able to connect to the iTunes Store for more than a day —and other customers on our discussion boards aren't experiencing similar issues— a software or internet service provider (ISP) configuration issue may be blocking your access to the iTunes Store. Click here to find out which ports and servers need to be allowed for iTunes Store access.
    Update iTunes to the latest version.
    If you have not done so already, try the steps in iTunes for Windows: iTunes Store connection troubleshootingto troubleshoot iTunes Store connectivity in Windows.
    Firewall issues:
    Windows XP: If you've upgraded to Windows XP Service Pack 2: By default, Windows Firewall is enabled. As with all firewalls not manufactured by Apple, you will need to configure Windows Firewall to allow iTunes to access the iTunes Store. To do so, see How to enable iTunes in the Windows XP Firewall.
    Windows Vista and 7: As with all firewalls not manufactured by Apple, you will need to configure Windows Firewall to allow iTunes to access the iTunes Store. To do so see, the "Blocked by software firewall" section in this article.
    Proxies can cause issues and should be avoided whenever possible. To disable the proxy built-in to Windows see, iTunes for Windows Can't access the Internet if proxy settings are incorrect.
    If you are receiving a specific error message you may want to see, the "Specific Conditions and Alert Messages" section in this article as needed.
    If the issue still persists, contact your internet service provider and confirm that the ports and servers in this article are enabled over your network.
    The "hosts" file may be blocking the iTunes Store
    Microsoft's article How do I reset the hosts file back to the default? has instructions and a "FixIt" to have Windows try to reset the hosts defaults for you.
    Note: Some workplaces may put internal resources in the hosts file but may also use it to block iTunes Store.
    To create a copy of your hosts file and replace it with an empty hosts file, follow the instructions for your operating system below.

  • I started to download a movie for rent and lost internet connection. Now it tells me to go to my downloads but I can't find them where should I look.

    I started to download a movie for rent and lost internet connection. Now it tells me to go to my downloads but I can't find them where should I look.

    Me too!!! It says check your Downloads, but unable to find Downloads...

  • Firewall necessary for Point to Point internet connections?

    Firewall necessary for Point to Point internet connections? We have multiple point to point t1 connections to our sites and was wondering if a firewall should be in place to filter traffic. We are also implenting a microwave t1 from a service provider and was wondering if firewalls would be needed for just this or the wired as well. According to the microwave company no firewalls are needed. Do i really want to leave security in the hands of the ISP?

    Matt,
    If you are buying private line T1 service from a carrier that connects 2 of your sites you would not use a firewall. Your traffic is never mixed with any other traffic. If your data is very sensitive, or if you have to comply with Payment Card Industry standards then you might want to encrypt your data, but a firewall would still not be necessary.
    If you have a T1 connecting you to the Internet for Web browsing etc then you very much do need a firewall.
    Please rate helpful posts.
    Dave

  • HT1725 When I'm downloading iOS for my iPhone just for a minute my internet connection was gone and the whole download was deleted and when I resumed it started from the beginning?

    When I'm downloading iOS for my iPhone just for a minute my internet connection was gone and the whole download was deleted and when I resumed it started from the beginning?

    Delete and re-download the Dropbox app. You will have to sign in again and adjust app settings.

  • Loss of Internet connection through TC after sleep.

    I have a Netgear ADSL Wireless modem which is connected to a TC in bridge mode.
    So here is what happens, I am connected wirelessly to the TC and can access the internet no problem. I then put the MacBook Pro to sleep, then on waking the MacBook I have no internet connection. But if I select the wireless network of the Netgear I do have an internet connection. The MacBook then at some point reverts back to the TC wireless network and all works OK. I think it reverts back to the TC network after a sleep period.
    It does not do this every time but it does it enough to have become annoying.
    I presume that on those occasions that I have no internet connection through the TC that this is because the TC is otherwise occupied?
    Is there a way to cure this problem?
    Phil

    Hi Larry,
    If you go to Control Panel -> Network Connections (For Vista and Windows 7: Network and Sharing Center) -> Double click on your Network Adaptor (Vista and 7: Top left hand corner of the Network and Sharing Center, click on 'Change Adaptor Settings' and double click on your adaptor. Click Properties and scroll down to 'Internet Protocol Version 4 (TCP /IPv4), click Properties and make sure that 'Obtain an IP Address automatically' and Obtain DNS server address automatically' are ticked. Click Ok, then OK, then finally close. Check to see if you have connectivity. If you don't, go to start, in Run (Or in the search bar) type 'cmd'. Once Command Prompt opens, type 'ipconfig /flushdns'. Close Command Prompt and check again. If you still don't have Internet connectivity, go to Internet explorer and click Tools -> Internet Options (If you have Internet Explorer 7 or 8, press Alt before looking for tools. This will make the bar appear). Go to the Connections Tab and click on 'Lan Settings'. Make sure that you do not have 'Use a proxy server for your LAN' ticked. Also make sure that you have 'Automatically Detect Settings' ticked. Once you have done this, click Ok, Apply and Ok and check again for connectivity. If this didn't resolve your problem please post back
    Sorry for the long answer
    Cheers
    Like this post? Give it a Star . If this post answers your question, please Mark it as the Accepted Solution.

  • Problems sharing internet connection through Airport with a PS3

    Does anybody know how to share an internet connection wirelessly with a PS3? I've tried everything including following directions from the tech support people from both Sony and my ISP (Verizon) and nothing works. Last time I've talked to Verizon I've obtained a IP number from them as Sony recommended and that did not work either. Is anybody out there with a PS3 sharing the internet connection through Airport successfully? I'd really appreciate any help. Thanks.!!
    Message was edited by: pbranda

    Let's double-check your Mac's Internet Sharing settings ...
    To setup for Internet Sharing (Wired to Wireless):
    Setup the Network
    Cable Modem > (Ethernet cable) > \[Ethernet port] Mac > (wireless) > PS3
    Enable Software Firewall
    System Preferences > Security > Firewall
    o Block all incoming connections (enabled)
    Enable Internet Sharing
    System Preferences > Sharing
    o Select "Internet Sharing" from the options in the left column
    o Share your connection from: Built-in Ethernet
    o To computers using: AirPort (checked) (Note: Uncheck all other entries in the list.)
    AirPort Options...
    o Network Name: <anything you want>
    o Channel: Automatic
    o Enable encryption (using WEP) (optional)
    o Password: (optional)
    o Confirm Password: (optional)
    o WEP Key Length: (optional)
    o Click OK
    o Select "Internet Sharing" again
    o Click "Start" to start Internet Sharing
    o Click Start

  • Updating firmware when I can't get an internet connection through the router

    I am trying to update the firmware for WRT54G V8, but some of the instructions indicate I need to have the router connected and be connected to the internet.  I cannot get an internet connection through the router.  Can I upgrade firmware without being connected to the internet through the router.  (I have had this router for about a year and a half with no problems until now.)

    Yes, you can upgrade the firmware without an Internet connection.
    To upgrade the firmware, first download the new firmware into a computer that you can wire to your router.
    Next, power down your entire network.
    Then wire the computer to a LAN port on the router.
    Disconnect all other wires from the router.
    Power up the router and allow it to fully boot (1-2 minutes).
    Power up your computer.
    Login to the router, and do the firmware upgrade  (it will likely take several minutes).
    Power down your entire network.
    Next you need to reset the router to factory defaults.
    To reset your router to factory defaults, use the following procedure:
    1) Power down all computers, the router, and the modem, and unplug them from the wall.
    2) Disconnect all wires from the router.
    3) Power up the router and allow it to fully boot (1-2 minutes).
    4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
    5) Power down the router.
    6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
    7) Power up the router and allow it to fully boot (1-2 minutes).
    8) Power up the computer (if the computer has a wireless card, make sure it is off).
    9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
    10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
    If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
    If you cannot get "Reply from ..." in step 9 above, your router is likely dead. Report back with this problem
    If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. Report back with this problem.
    If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
    Please let me know how things turn out for you.

  • Help I purchase an Ipad yesterday I amusing internet connection through a netgear wired to my home computor since yesterday I am unable to open my emails or access my bank account ps I am not technical I am with orange broad band and have followed their i

    Help I purchased an ipad yesterday I am using internet connection through a wired up netgear router through my pc.Since then I cannot open my hotmail emails or access my online banking on wired pc and the navigator on ipad not working.
    I would appreciate help I followed all directions that Orange provided with netgear router

    Something here may help
    http://www.apple.com/uk/support/ipad/contact/
    pick a subject from left hand panel
    and this
    http://manuals.info.apple.com/en_US/ipad_user_guide.pdf

  • My macbook air is not getting internet connection through our home wifi It was working fine yesterday until I took the Air out of the house and used it on another wifi connection.

    My macbook air is not getting internet connection through our home wifi.  It was working fine yesterday until I took the Air out of the house and used it on another wifi connection.  One question is how to delete some of the networks that I don't use.  Would too many networks cause the internet connection to fail?
    Thanks.

    Would too many networks cause the internet connection to fail?
    It shouldn't but sometimes deleting the list of networks actually does solve the problem you are describing. Have you turned WiFi off and then back on on the computer?

  • Setting up BD Live when internet connection in another room

    Hello,
    Just got a Sony BD and I want to connect it to BD Live in my living room. However, my computer and internet connection are in the family room. I don't want to send a LAN cable from my router to the back of the BD player. Can anyone give me some suggestion as to how to connect to the internet on my BD player? What adapters I might need. I'm sure it's probably simpler than I thought. Thanks for your help!

    I second Dave's suggestion.
    As an added alternative, you may want to take this opportunity to set up a wireless home network. Especially if you own(or plan to soon buy) a laptop. This will be a more expensive approach overall, but the rewards will greater.
    Disclosure: Former BBY employee.

  • How can i set my ipod up without internet connection? Every-time I put my network in it say "Could not find network".

    My I-pod wont connect with the network, so I reset my I-pod to see if that was the problem
    and now I cant set my I-pod up because my I-pod cant find the network. I cant download I-tunes
    on my laptop because I have to have a password that I don't know.

    Try either:
    - On a computer that has iTunes and an internet connection
    - Go to a different location and try connecting to another wifi network

  • Device update for ipad doesnt see internet connection

    My itunes program in the device update section for my ipad doesnt see my internet connection. In diagnostics it find all but the connection. it says internet connection failed. store is active and online im connected to internet yet the little update button for ipad doesnt recoqinize my internet connection?

    My itunes program in the device update section for my ipad doesnt see my internet connection. In diagnostics it find all but the connection. it says internet connection failed. store is active and online im connected to internet yet the little update button for ipad doesnt recoqinize my internet connection?

Maybe you are looking for

  • Media Player doesn't show new episodes and has horrible organization.

    Yup, so i log on to adobe tv via web browser and browse the latest content and stuff with no problem. I add a program I'm currently watching(http://tv.adobe.com/watch/the-complete-picture-with-julieanne-kost/top-10-littleknown-feat ures-in-photoshop-

  • Unable to view forms in Planning 9.3.1

    I have created few forms in Planning.I can see the forms in the left window pane and I am able to open it up.However when I go to Admin->Manage dataforms section I do not see any forms.I don't even see the folder. I restarted the Planning services bu

  • Unable to discover wordpress file in CS5

    Hello everyone, This is the first time I have dabbled with wordpress for CS5. I have XAMPP set up and have created my wordpress log in to view the dashboard.  I went in and activated a theme and it is in my file structure under my website name in the

  • Unable to get GUI desktop

    I recently loaded Solaris Express Developer Edition DVD on to my system with solaris 10 as OS but i am not able to get "GUI desktop environment". It trys to load but falls back to command mode Command mode is working perfectly, and can do unix basic

  • I have moved my Thunderbird profile to MyCloud and it is painfully slow launching. Performs fine once launched.

    I decided to move everything to MyCloud and all works fine exept Thunderbird can take upwards of 30 seconds or more to launch. Firefox is a bit sluggish as well, but both perform fine once running. I am on the latest versions of each.