TS1702 Sound lag in GarageBand app on iPad 4 + bluetooth connected to heardphone.

I use GarageBand on iPad (4th generation). I record several tracks using built-in speaker. But as soon as I connect bluetooth heardphones to iPad the active GB instrument starts to sound with ~1 second delay.
Interestingly the latency occurs for signal from ACTIVE INSTRUMENT ONLY (no delay for recorded GB tracks)
That's why I assume that the lag happens on GB end but not on iOS or on bluetooth receiver (Phillips SHB9100) end.
Everything goes back to normal as soon as I listen output sound via jack or built-in speaker. So currently I have to connect headphones via jack to monitor sound while I record to GB.
Can anybody advise please:
How to eliminate the lag for sound from active GB instrument in case I use Bluethooth sound output?
Probably the same issue is discussed here: http://www.ifans.com/forums/threads/bluetooth-delay.211444/ (no solution given)

Hi Meg thanks for the advice, I'm concerned about resetting both devices with no access to my iTunes, I've previously had issues where it would require iTunes to reset properly. Second issue is installing the same sharing app on the iPhone with no access to AppStore while I have no data on the phone. Guess I'll have to wait till I get home to access those photos on any other device... Ohwell.
I think theres an assumption made by Apple that users of iPad and iPhone would always have access to the Internet, at the very least on the iPhone. Evidently thats not the case, they just didn't think it through when designing it. Hope they take notes on this forum and release hotspot functionality on iPad, that would really solve slow BT transfer speed problem also. BT has always been slow with file transfer, not really aware of it's best use.
Thanks anyways Meg, appreciate the answer.

Similar Messages

  • Can I use the Garageband app for iPad to create a new ringtone for my iPhone 4?

    I want to create new ringtones for my iPhone, and consulting Support, they explain how to do that using Garageband 9.0, but I want to know if the Garageband app for iPad can be used to do the same thing or not. The iPad uses iOS 4.3.3.

    Would you be composing the ringtone in garageband or taking existing material and editing it? You could create something but then you would have to send to iTunes and format it as a ringtone there I believe

  • I have no sound from x factor app on iPad, any suggestions please?

    I have just downloaded the x factor App on my iPad. I have no sound. All my sounds are on, but for my keyboard..and. Not sure how to turn that back on as it's displaying on under settings in sounds. All sound from every other app is coming through.  Any suggestions please?

    Are you sure that you don't have system sounds muted? You will still have sound in the Music App and YouTube even with systems sounds muted.
    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • How do I lengthen the number of measures I can record on the GarageBand app for iPad?

    I have the GarageBand app for my iPad mini.  When I go to record, it only lets me record 8 measures and then stops.  How do I lengthen the number of measures I can record so I can record one track of an entire song?

    By default song sections are eight bars long.  To record a longer song,you need to extend your song with additional sections.
    See this Help page:   http://help.apple.com/garageband/ipad/2.0/index.html#chs3c3ef5dc
    Either record your song in sections of eight measures, or extent a region across several sections:
    Change the length of a section
    Open the song section controls and tap the section you want to change.
    Tap the up or down arrow next to Manual to lengthen or shorten the section incrementally by bars. You can swipe vertically to change it in larger values.
    If you want the section to match the length of your next recording (to the nearest bar), turn on Automatic before you record. This is especially useful when recording improvisations or longer parts. The Automatic option is available only for the last (rightmost) section in a song.
    Tap anywhere in Tracks view to close the song section controls.
    When you shorten a section, any regions extending past the end of the section are shortened. When you lengthen a section, all regions that extend from the beginning to the end of the section now loop to the new end of the section. A section can be any number of bars, and the overall song can be up to 320 bars long.

  • TS1702 How to delete an app on iPad mini?

    I am unable to delete an app I have downloaded. Although all the icons wiggle, the X sign does not appear on any icon. So how does one delete an app on iPad Mini?

    Check: Settings - General - Restrictions - Deleting Apps = ???

  • TS1702 Where is my FaceTime app? iPad ios6

    I used to have this icon and app, but now I can't find it.

    Did you set any restrictions?
    Settings>General>Restrictions>FaceTime

  • TS1702 Can't download free apps the iPad says there was a problem with a previous purchase

    Can't download free apps message says problem with previous billing purchase

    That can mean that you have an outstanding balance in your account. Have you logged in and viewed your account?
    You can contact iTunes.
    Apple - Support - iTunes - Contact Us

  • Ipad Bluetooth connectivity not working

    I have the ipad 2 and my Bluetooth will not find any devices. I've tried everything from restart to restore. Does anyone have a clue how to fix it? Thanks!!

    Connect SoundLink to iPad
    1. Turn the speaker off and on again.
    2. Clear the speaker memory if necessary.
    3. Make sure all other Bluetooth device nearby are turn off e.g. iPhone and laptop.
    4. Make sure your speaker is in discoverable mode; press Bluetooth button down for 3 seconds.
    5. Make sure the Bluetooth capability on your iPad is turned on.
    6. Your Bluetooth device may be out of range – try moving it closer to speaker.

  • Garageband app stuck loading a song...

    I have been using the GarageBand app for iPad for a very long time and I've created several songs over the years using it. Recently, I've run into a major issue using the application. While I was creating a song, GarageBand crashed and shut down (sending me back to my Home Screen). When I tried to reopen the application, GarageBand tries to recover the last song that I was working on. But it froze at the loading screen and it never lets me access the song (or any of the older tracks within my library of created songs). So I exited the app and manually forced it to shut down, and then I tried to reopen it again, and the same issue occurs.
    This is the second time that I've lost a track due to this problem, but last time when I manually shut down GarageBand it didn't try to recover the track and instead froze at the loading screen whenever I selected the song for editing from my list of created tracks. I've tried everything to fix this issue accept deleting and reinstalling GarageBand on my iPad all-together. But I'm afraid that if I remove the app that it will also delete all the songs that I haven't backed up or saved to iCloud yet...
    I really don't won't to lose any of my music... Any help regarding my issue would be much appreciated!

    I have a very similar issue. I was working on a song in GarageBand, and had to close my iPad (3rd Generation). When I returned to use GarageBand, it showed it was "loading" the song I had been working on, but could not finish opening the app. Everytime I attempt to open GarageBand, it attempts to load the same song and crashes. I cannot get into GarageBand at all. I have performed a sync with iTunes and tried several "hard resets", to no avail. Before I delete the app and reinstall GarageBand I would like to know if there is a resolution for this problem. I would prefer not to lose all of my projects in GarageBand. I only have a handful of them saved in ITunes. Any help would be welcome.

  • Bluetooth connection notification sound

    Does anyone know how to turn off the notification sound which plays when the Razr Maxx bluetooth connects with a car system? It is extremely annoying to have this play every time you get in the car and start it especially if you are running errands and make several stops.

    Most notifications that come from an app (texts, emails, etc.) can be shut off individually, through that app.  The bluetooth connection notification, however, AFAIK cannot.  The only place it would make sense to be would be, from your homescreen, is menu>settings>wireless & networks>bluetooth settings.  There is also an advanced bluetooth settings on this screen, but my phone (HTC Rezound) does not have an option to turn off that sound in either of these.

  • Garageband is not picking sound from builtin mic (rMBP). I recorded some tracks, now it is not working. All other apps can use the mic. Monitoring is switched ON at GB, it picks sound only some other app, eg. Skype, is used to access the mic.

    Garageband is not picking sound from builtin mic (rMBP).
    I recorded some tracks, now it is not working. I have checked GB Preferences, Audio/MIDI > Audio Input > Built In Microphone.
    All other apps can use the mic. Dictation, Skype etc. can use the mic!
    Monitoring is switched ON at GB, it picks sound only some other app, eg. Skype, is used to access the mic.
    Can any one help me, Please!
    Many thanks!

    I have foud the solution - rather stupid. The system setting for audio input was at 70%, increasing it to 100% solves the problem!

  • I am getting no sound from all of the game apps on my ipad. i.e. angry birds, scrabble, but I can still get sound from the ipod app.  also I can hear the games if I am using earphones

    i am getting no sound from all of the game apps on my ipad. i.e. angry birds, scrabble, but I can still get sound from the ipod app.  also I can hear the games if I am using earphones

    You have your mute button on.  In Settings check to see if you have Lock Orientation checked or Mute checked on the right hand side.  If you have Mute checked, all you need to do is click the mute button above the volume control buttons on the upper right hand side of your iPad.  If you have Lock Orientation checked in settings, you double click your home button and the most recent apps will appear.  Swipe your finger to the right until the Mute icon appears on the left side.  Touch it and you will unmute system sounds.

  • I have completed a song on the GarageBand app which plays fine. I export it via email and it opens up in iTunes on my PC fine but when you play it there is no sound from the file. Anyone know I am doing wrong please?

    I have completed a song on the GarageBand app which plays fine. I export it via email and it opens up in iTunes on my PC fine but when you play it there is no sound from the file. Anyone know I am doing wrong please?

    you might need codecs on you pc. i find vlc player and codecs is perfect for music and videos.

  • If i buy garageband app on my iPod touch 4, can i download it free on my iPad 3

    if i buy garageband app on my iPod touch 4, can i download it free on my iPad 3

    if thye are the same account you can go to app sotre updates purchase and then download the applicaiton

  • Anyone know if there will be a Garageband app for the ipad?

    I'd buy one today if I could use it with Garageband. The flexibility of being able to take it anywhere and record/edit tracks, considering it's size and the excellent screen, would make it worth the money to me.
    Just wondering if anyone has seen/heard anything about such an app. There would have to be a way to use the USB port as an input, but other than that, you could save the files the your mac but be able to move it around so easily...would be great.

    Apple has not announced GarageBand for the iPad nor anything similar but that doesn't mean that they won't release something in the future. Meanwhile, there are companies like Sonoma WireWorks and Krasidy that are already producing multitrack recording apps for the iPad or iPhone. Sonoma has a version specifically for the iPad, so that might be worth checking out.
    I haven't seen anything that uses the Dock connector to expand the input capabilities, but there may be something out there, or the new SDK may allow such a thing in the future.
    Regards.
    Message was edited by: Dave Sawyer

Maybe you are looking for

  • Question about ASE 15.7 kernel mode – process vs threaded

    Hi there, This question is related to upgrading Sybase ASE Server from version 15.5 to version 15.7 on Sun Solaris SPARC Operating System (Solaris 10). For the upgrade, I need to choose between threaded kernel and process kernel mode. 1> Is the proce

  • AP Accrual write off

    Hi, Kindly help to me to understand under what situation we need to write-off the AP accrual ? Wouldn't we want to accrue all univoiced Receipts ? Thanks

  • SM 58 error urgent

    hi , i am doing idoc to file . in sm 58 I getting this error"No service for system SAP<sid>, client 220 in Integr ation Directory " . i have configure r/3  & 3 rd party  systems  as bussines system . please can anyone tell me where i need mention sap

  • Set NAT's Default Host based on client ID, not IP

    Hello, Is there a way to set the NAT's default host to a "Client ID" instead of an internal IP address? I need this because often my PC's IP change and I need to update it manually in the Airport, causing it to restart and breaking all internet in my

  • Servicegen

    Hi, I am trying to run the servicegen ant task withou running the setEnv.cmd file. My build process is very complex and I ned to include the WS generation in a standard way (run on a machine without wl install). I managed to do this withe wl6.1 stuff