TS1702 The default Camera application is not responding, it comes with black screen. Functions on the screen are unresponsive, very slow.

Dear community,
The default camera application became un-usable in my iPhone5. Cannot operate camera at all. It comes with a blank/black screen, camera controls are unresponsive, front-back camera toggle switch takes couple of minutes to response but with a blank/black screen both front and back.
I searched solutions and applied but none seems to work. I reset my phone, started as blank, with no user account, still camera is acting same (or rather not acting). Other apps that use camera give error when try to access the camera such as whatsap and skype. Facetime comes with a very blurred view. Couple of screen shots are attached.
I think need to erase and reload the camera program but I could not find how to do it. Is it possible? or is there any other suggestions?

Hello hakanid,
The following article provides some useful troubleshooting steps that can help get your iPhone's camera working.
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen

Similar Messages

Office documents does not open in the default office application from Search Results

1 WFE + 1 App Server + 1 server for OWA + 1 separate DB server make up our DEV SharePoint 2013 environment. We migrated many web applications from our SP 2010 environment to SP 2013 environment. Client integration is enabled and "Open
Documents in Client Applications by Default" feature is enabled at the site collection level. OWA is enabled and working on the search results, such as showing preview.
From the document libraries, if I open office documents like word, excel and PowerPoint, they open in the respective office applications. However, from the search results, when I try to open by clicking on the result, it opens on the browser. I want
OWA to show document preview but still want to open the document in the default office application. How to overcome this?
I have IE 8.
Thanks, Soumya | MCITP, SharePoint 2010

Go to the bottom of the Search page, you will see a Preferences link:
From there, you can set your preference. This is a per-user setting and as far as I'm aware, cannot be set globally.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

I am unable to open adobe bridge on my mac. When I try to open it nothing happens. When I right click it says the application is not responding. I can also not op en through photoshop. Please help

I am unable to open adobe bridge on my mac. When I try to open it nothing happens. When I right click it says the application is not responding. I can also not op en through photoshop.

Could you see whether Firefox will start in its Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
Here's how:
With Firefox closed, hold down the Shift key while starting Firefox.
A small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Does that work?

How do I close multiple documents opened in Finder when the files are loading and the Application is not responding?

I was moving 90 files from one folder to another and instead accidently double clicked all the files I had selected and they all opened at once and now they are all stuck trying to load and the program is not responding.
When I put my mouse over the folders, it's just the loading cursor so i can't select anything. I've tried using 'command' - 'option' - 'W' and that doesn't work either.
I have tried restarting finder and all that does is shut all of the folders and reopens them and they get stuck trying to load all over again.
I have tried restarting my macbook and every time I log back in, it restarts all the programs and all the finder windows and the whole process repeats.
(even when I unselect the 'restart opened programs' box.)
I really hope someone knows how to troubleshoot this problem I am having!

You're trying to use Spry Accordions for something they were never intended to do. Why don't you switch to a more appropriate jQuery Mega Menu?
http://www.designchemical.com/lab/jquery-mega-drop-down-menu-plugin/examples/
In case you missed the announcement, Spry is dead. Adobe abandoned it late last year because it has outlived its usefulness.
http://blogs.adobe.com/dreamweaver/2012/08/update-on-adobe-spry-framework-availability.htm l
Nancy O.

Change the default camera (for quick launch)

I'm having some issues with the default Camera app.
I find that Camera Zoom FX and others, are better, (snd respond better to the physical camera button).
Is there a way to make pressing the camera button, launch a different camera app than the default ?!
Thanks

As I understand, the application need to support the quick launch option. My guess is that the developer for the camera application, need to specific this support for each model itself.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

FIRST TIME RUNNING THE DEFAULT BSP APPLICATION IN ABAP

Hi BSP experts,
        I am happy to see many people are solving the problems on BSP in sdn.
I am running the bsp application for the first time by taking the t-code se80 into consideration and executing the default bsp application given there.But I am getting the error   The URL http://nwrbcs:8000/sap/public/bsp/sap/system/login.htm was not called due to an error.The error is common as to all RABAX_STATE and in addressbar the address displayed is
http://nwrbcs:8000/sap/public/bsp/sap/system/login.htm?sap-url=%2fsap%2fbc%2fbsp%2fsap%2ftutorial_1%2fdefault%2ehtm&sap-ffield_b64=c2FwLXNlc3Npb25jbWQ9b3Blbg==.
Mainly my problem is i am not able to goto logon page.I am using the version Netweaver04 to run this application.Are there any special prerequisites to run a bsp application.I had donwe some settings in t-code SICF all services are activated(subservices also) and in path /default_host/sap/bc/bsp rightclick display service in handler list tab I added CL_HTTP_EXT_BSP. In RZ10 I added the parameter icm\host_name_full (as I am using workgroup instead of domain in my system) for instance profile.In t-code SCICM status is running.
If not clear with the above details I will send the screenshots of required t-codes and runtime errors to the mail-id immediately.
But I am not able to retrieve the problem.Is it necessary to check any kernel updates.I dont know more about that, I will send the required screenshots clearly to know all the details.I will send the trace file also if u need.It is very urgent for me to work on bsp but I cant.If u r familiar with particular version I will send that screenshots as I tried it in 4.7ee(R/3),ECC5.0(R/3) AND Netweaver04(abap).I am getting different errors in all the three versions.pls go through this and help me.
    Helpful answer will be rewarded unfailed.

you need to configure the FQDN. That is causing the issue in your case.
the URL shd start something like abc.mycompany.com:port_number...
Refer below thread & blog:
/people/durairaj.athavanraja/blog/2005/08/21/running-your-first-bsp-application-in-sap-netweaver-04-abap-edition--nsp
- step by steby link to configure the FQDN - Re: Unable to run any BSP application
Raja T

Adobe pdf printer save dialog box opens in the background - progress bar shows Not Responding

I have two users who have Acrobat X Pro version 10.1.4 that are experiencing the same things. First, one person just changed laptops and the new one has a fresh Windows 7 Enterprise X64 image and new installation of Adobe Acrobat X Pro. When he used the pdf printer for the first time(after opening the program and accepting the license agreement) he was in MS Excel '07 and chose file>print>Adobe PDF and then the progress bar came up and then showed not responding. After he did this a couple of times with me standing there I noticed that the save dialog box was opening in the background because I could see the icon blinking on the taskbar. He said that his old computer never did this and that it would always open up and ask where to save the file and never show 'not responding' on the progress bar. The other person having the same issue is running the same version but she has had the program installed on her machine for a few months and an older version on before that.
Is there a way to make the dialog box show as soon as you print to the Adobe PDF printer? What is causing this? Is there another way to create a pdf from MS Office like the add-on?

I have two users who have Acrobat X Pro version 10.1.4 that are experiencing the same things. First, one person just changed laptops and the new one has a fresh Windows 7 Enterprise X64 image and new installation of Adobe Acrobat X Pro. When he used the pdf printer for the first time(after opening the program and accepting the license agreement) he was in MS Excel '07 and chose file>print>Adobe PDF and then the progress bar came up and then showed not responding. After he did this a couple of times with me standing there I noticed that the save dialog box was opening in the background because I could see the icon blinking on the taskbar. He said that his old computer never did this and that it would always open up and ask where to save the file and never show 'not responding' on the progress bar. The other person having the same issue is running the same version but she has had the program installed on her machine for a few months and an older version on before that.
Is there a way to make the dialog box show as soon as you print to the Adobe PDF printer? What is causing this? Is there another way to create a pdf from MS Office like the add-on?

Adobe camera raw will not respond in bridge cs6?

adobe camera raw does not respond in adobe bridge? I am trying to open Jpegs, which i have previously been able to do so by right clicking and opening in adobe camera raw. Now it is unresponsive.

dj1461986
You are definitely in the wrong forum for Bridge CS6 and Adobe Camera Raw. You have posted in the Adobe Premiere Elements Forum (video editing focus).
You probably want to be posting in the Photoshop Forum.
http://forums.adobe.com/community/photoshop
My preliminary findings suggest possible workaround
a. Open camera raw in Photoshop 5 or 5.5 and then open edited raw image in Bridge CS6
or
b. There is a preferences route to check out.
Not being a Photoshop user, this is a quick suggestion where you might start looking. This is apparently a known issue.
The Photoshop users should be able to give you all the details and options you have for workarounds for now.
ATR
Add On...Please repost in Photoshop Forum or wait for a moderator here to see your thread here and move it from here to there.

Default Web Application is not visible in Weblogic Console

We are using Weblogic 5.1.0 SP7
          We moved our Application from the Implicitly Defined Default Web
          Application which is configurated by the
          weblogic properties to a Web Application. Because we don't want to
          change any URL in our Application, we
          decided to deploy it as Explicitly Defined Default Web Application.
          By this we recordniced that the weblogic.httpd.defaultWebApp property
          worked not that way descibed in the
          Weblogic Documentation. You have to write the path to the WebApp not the
          name!
          So we have the following Entry in the weblogic.properties:
          weblogic.httpd.defaultWebApp=i:/if_home2/web
          This works fine. The Server starts and serves the WebApp the way we
          expected. But wenn we start the Weblogic
          Console the WebApp ist not visible in the "myserver/HTTP/Servlet web
          applications" folder. This one is empty
          now! Previously the "General" Entry for the Implicitly Defined Default
          Web Application was shown here, which
          showed our Servlets and JSP's and their hit count and parameters.
          So there is no chance to monitor the Servlets and JSP's of the default
          Web Application.
          I tried to deploy our WebApp a secound time with
          weblogic.httpd.webApp.OurApp=i:/if_home2/web
          but this create a second independent WebApp. OurApp is shown in the
          Weblogic Console but it does not monitor
          the hits to the default WebApp. So this is not a solution!
          Any idea to make the default Web Application visible in the Weblogic
          Console?


in my development environment i checked in site collection feature, it isn't available in site collection feature but still i am getting those web parts in web part gallery while adding it on page.
Also, in Production environment, feature is available in /templates/features folder after deployment, but not available in web part gallery while adding it on page.
I tried with uploading .webpart file which is available in /templates/features production environment as i mentioned, is running for one web part. Not for second web part and giving me security error.
As, uploading .webpart file is not feasible solution, please tell me how could i do that with .wsp file?
please tell me what could be another workaround.

Mail application does not respond even after forcing quit over and over

My mail application is not responding. I have forced quit at least 5 times and I still get the beach ball. This just started happening 2 days ago and now I can't access my mail at all.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

HT1338 Application "FINDER"not responding,Desktop files disappeared & " also "Trash" not working svn after relaunching several times.

Application "FINDER"not responding,Desktop files disappeared & " also "Trash" not working svn after relaunching several times.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the name of the crashed application or process (Finder) in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

How do I disable Numbers as the default spreadsheet application?

A couple of days ago I was opening a Microsoft Office Excel spreadsheet, as usual. Unexpectedly, the Numbers application launched without prompting, presented an introductory page (Welcome to Numbers etc.) then asked a question (which I unfortunately don't recall). I clicked on the button that seemed to lead me out of the program, but it did not. Instead, Numbers made itself the default spreadsheet application. I cannot find a way to "undefault" it. I know how to use "Open with" in the menu and can select xlsx of course, but when I try to download new spreadsheets they automatically download as Numbers spreadsheets. I don't want to disable the Numbers application completely, but I also don't want to learn a brand new application with all its ins and outs right now. I just want to get my work done in EXCEL!!!

Anne,
In Finder, navigate to one of your Excel documents. Select the Excel document, but don't open it. Then choose File > Get Info from the Finder menu line.
In the Info pane, about half way down, in Open With:, select Excel and then click the Change All... button.
Jerry

Default Web Application ist not visible in WebLogic Console

We are using Weblogic 5.1.0 SP7
          We moved our Application from the Implicitly Defined Default Web
          Application which is configurated by the weblogic properties to a Web
          Application. Because we don't want to change any URL in our Application,
          we decided to deploy it as Explicitly Defined Default Web Application.
          By this we recordniced that the weblogic.httpd.defaultWebApp property
          worked not that way descibed in the Weblogic Documentation. You have to
          write the path to the WebApp not the name!
          So we have the following Entry in the weblogic.properties:
          weblogic.httpd.defaultWebApp=i:/if_home2/web
          This works fine. The Server starts and serves the WebApp the way we
          expected. But wenn we start the Weblogic Console the WebApp ist not
          visible in the "myserver/HTTP/Servlet web applications" folder. This one
          is empty now! Previously the "General" Entry for the Implicitly Defined
          Default Web Application was shown here, which showed our Servlets and
          JSP's and their hit count and parameters.
          So there is no chance to monitor the Servlets and JSP's of the default
          Web Application.
          I tried to deploy our WebApp a secound time with
          weblogic.httpd.webApp.OurApp=i:/if_home2/web
          but this create a second independent WebApp. OurApp is shown in the
          Weblogic Console but it does not monitor the hits to the default WebApp.
          So this is not a solution!
          Any idea to make the default Web Application visible in the Weblogic
          Console?


Hello Nadar,
Tell me how are you starting server in the cluster, through nodemanager or commnadline.
Kuldeep

Firefox won't open when prompted the first time. Says "Not Responding". I have to hit cntrl/alt/del then try starting again. Sometimes multiple times.

Firefox won't open when prompted the first time. Says "Not Responding". I have to hit cntrl/alt/del then try starting again. Sometimes multiple times.

Sounds like a "hang at exit" problem. There are several possible causes for that error. See:
* How to stop the running Firefox process
** In Task Manager, does firefox.exe show in the '''Processes''' tab?
** See: http://kb.mozillazine.org/Kill_application
* What may cause Firefox to hang at exit
** http://support.mozilla.com/en-US/kb/Firefox+hangs (see "Hang at exit" section)
** http://kb.mozillazine.org/Firefox_hangs
** https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding
* You may need to try Firefox Safe Mode
** You may need to use '''Safe Mode''' to locate the problem: http://support.mozilla.com/en-US/kb/Safe+Mode
**Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
** If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
** See the following for more information
*** http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes
*** http://support.mozilla.com/en-US/kb/Troubleshooting+plugins
*** http://support.mozilla.com/en-US/kb/Basic+Troubleshooting

When I try to open images I am getting this message: "The file "image.jpg" couldn't be opened because you don't have permission to view it." "Which I've tried - but it's not responding, plus its with all images now. Can anyone help?

When I try to open images I am getting this message: "The file “image.jpg” couldn’t be opened because you don’t have permission to view it." "Which I've tried - but it's not responding, plus its with all images now. Can anyone help?

Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.iBooksX
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

TS1702 The default Camera application is not responding, it comes with black screen. Functions on the screen are unresponsive, very slow.

Similar Messages

Maybe you are looking for