TS1702 Trying to rename items in my iBook library! Any ideas?
Same as title. How do I rename items in iBook ?
If you are referring to PDF file
Suggest you use free Adobe Reader to rename your PDF file.
https://itunes.apple.com/sg/app/adobe-reader/id469337564?mt=8
Similar Messages
-
My iPod touch is stuck in landscape view. Even when held vertically if I open facebook or safari is rotates to landscape. Have tried turning on and off, same results. Any ideas to fix?
Try switching it back from landscape to vertical. Or, go to settings and see if you have any special setting turned on that enable only landscape view. Also, try hooking it up to your computer and charging it to see what happens.
-
I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?
I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?
Did you already try these suggestions?
Check USB connections
Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
copied from Resolve specific iTunes update and restore errors -
im trying to type my password but only zero and nine work I tried restarting but it still wont work have any ideas please answer ASAP
Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost. -
When I go to my shortcut on my desktop to open itunes I get Itunes.exe unable to locate component. I have tried removing it and re-install it. Any ideas what might be wrong?
If in the message window it says that "...MSVCR80.dll was not found", go to this guys webpage: http://pcsupport.about.com/od/findbyerrormessage/a/msvcr80-dll-not-found-missing -error.htm. I followed his instructions exactly and problem solved.
-
My iPad2 won't turn on. It will act as if turning on but when I slide to unlock it freezes. I have tried to reset and it will not. Any ideas?
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
My wife's iphone will not turn on. I have tried the normal resetting procedures but nothing. Any ideas would be much appreciated..
iPhone User Guide
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
Try this First... You will Not Lose Any Data...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first... -
I have a 4th gen iPod touch that won't power up! I tried all the traditional stuff. I want to know how to tell if the battery is good. itunes see's the ipod in recovery mode. Tried dfu mode and did not work. Any ideas? I can hear the PC beep when plugging it in! I suspect a bad battery and trying to charge it ina wall charger made it hot!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. The appointment is free.
Apple Retail Store - Genius Bar -
Why does my iPod Classic keep trying to sync items from my iTunes library that are no longer there?
I have an iPod classic, 160GB model, that keeps trying to sync items that are no longer in my iTunes library, is there a way to stop it from doing this? My iTunes library is on my MacBook Pro (17-inch, Late 2011), 2.4 GHz Intel Core i7, 8 GB 1333 MHz DDR3, AMD Radeon HD 6770M 1024 MB.
Clarification needed
Does your iPod clears your iTunes library or the music in the iPod itself disappears, when your sync the iPod? -
Hello,
I have some trouble with my iBook (G4, 14``inch, 1.33Ghz). I bought it in November 2004 and got additional memory (512MB) installed at the shop. It run fine until August 2004, when the ethernet port was no longer detected. As a case of guarantee the logic board was changed and everything seemed okay, but shortly after that the iBook started to freeze or crash now and then. After two total system crashes at the end of last year I took a closer look to the problem and found, that in the system profiler most times the built-in memory (256MB) was referred as "empty". Resetting of PRAM und PMU didn't change anything. Then I extracted the additional memory and surprisingly the iBook run fine again. I tried a new memory (again 512MB), but the iBook again started to freeze after a few minutes. My guess was that the memory slot was defect. A problem, which I can clearly live with. So I run the iBook for two days (only built-in memory) and everything was okay, but yesterday I made an intensive session (several installations and then some applications at the same time over 3-4h) and after a while the iBook slowed down and eventually froze. I wasn't able to restart until today (after about 6h, but of course I didn't try the whole night). Has anyboby an idea, what's could be wrong? Is it possible, that my iBook has a heating-problem? That's another possibility that occured to me yesterday.
aryht
iBook G4 14'' 1.33GHz Mac OS X (10.3.9)Ronda, we're talking past each other! I wasn't trying to use a cloned drive (MBP or iBook) in any of this!
What I had learned from experience (and from advice here and on the net) was that if you wanted to use an external drive with both an iBook and a MacBook Pro, you needed to format the drive as an Apple Partition Map. And that is true.
Clearly wrongly, I assumed that if I did a fresh install of Tiger using an Apple Partittion Map, it could boot an iBook. Clearly, an Intel-Mac installs something in that scenario that makes the drive only bootable from an Intel-Mac. I had mistakenly thought it was the partition scheme the determined which laptop it could be booted from and used with!
For my future reference--and for any one else who might be in this situation--here's the solution.
1. Format the external hard from the iBook.
2. Then connect it to your MBP or other more recent device, and drag your home folder and needed programs over to the drive.
3. Now, you can boot the external drive using your iBook.
4. Any changes to documents, mail (e.g., Eudora), etc. will register on that external drive.
I wish I had thought of that, or been advised to do that. It would have made short work of reconstructing the MBP's home folder contents on its return--a simple drag and drop operation! -
I can no longer import raw files from my Panasonic Lumix LX5 into Aperture 3.3.2 - raw files from my other Canon cameras are fine. Am still running Lion (10.7.4) - NOT Mountain Lion. Tried all available software updates - all up to date apparently but still no joy. OS X Lion shows the LX5 as a supported file format. I dont want to have to upgrade to Mountain Lion just to see if this solves the problem. Any ideas please.
Since when did this happen? Directly after you upgraded to Aperture 3.3.2?
If it happened directly after the upgrade the problem may be, that the raw support for your camera got lost. For some posters it helped to register the raw support again, see this post by Alan Roseman:
Aperture 3 preview of raw file greenish
If this does not help, you may need to reinstall Lion to bring back the raw support.
But if the problem occured independent of a new installation, ypu may have a problem with your camera or the card you are using. Have you tried to use a different card or to reformat the card in the camera? -
I started downloading a video from iTunes last night on my ipad when my wifi dropped out. Once I'd reconnected my wifi I tried to recommence the download but it kept saying that download was not available at this time. I then tried the steps in iTunes help but got the same message. Finally, I deleted the video (the part that had downloaded) from my video section and tried to start the download again from the start. However, when I go to iTunes it's still trying to download the original and even this morning I'm still getting the error message. Any ideas what I could do to get the video downloaded? I currently only have access to my ipad. Thanks.
I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
I am running Yosemitie on a iMac.
Paul -
So my daughter set a password to lock her ipod touch and now she can't remember it. I tried to restore to factory settings but it is still asking for a password. I tried 0000 and that didn't work Any ideas what to do?
From this Apple support document: iTunes: Specific update-and-restore error messages and advanced troubleshooting
This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the headingBlocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
B-rock -
In the importing operation Firefox detects Internet Explorer and Opera as installed browsers. When i select Internet Explorer cookies, history, favourites etc. are listed in a box where you can select the items you want to import in Firefox. When i select Opera no items are listed that can be imported. Any idea how this comes?
Hi,
I think that what you are searching be in Tools >> Options >> Privacy >> On Firefox will: change to "Use custom settings for history" then Button Show Cookies will be allowed and you will see the cookies in your browser in the next window
If you uncheck "Accept cookies from sites", probably the sites that need cookies will alert you that you need active the storage cookies -
I'm having trouble downloading Aps on my iPad . I have several that have frozen during downloading and I can't delete them. I've tried resetting my iPad, airplane mode and going through iTunes and Aps store, nothing has helped. Any ideas?
I'm having a similar problem, but different circumstances. Someone gave me their iPod nano to load with tunes. I, myself, don't own an iPod, and the flimsy booklet that came with this device is pointless -- no real info. Anyway, once it was charged, I chose tunes from my library to upload to the iPod, but the entire library began to load (not just the checked selections). I made several attempts to resolve this, including an attempt to restore the iPod to its original settings. Unfortunately, now the computer and iTunes will not recognize this iPod (when iTunes is open and iPod is connected, iPod does not appear in source list, and desktop only reads the device as "iPod", as opposed to what it was originally reading it as) and I can't even get back to the part of iTunes that asks me if I want to restore the iPod. Do I have to bring this to an Apple store, or is there anyone out there who can tell me how to resolve this? I tried the "5 R's" recommended by Apple, but they don't seem to work.
mich solo
Maybe you are looking for
-
JAN 4, 2012 As of the Upgrade to Lion,. 2007 I-Mac - the Email portion, .. DOES NOT allow a Video Clips to be sent via the Email as the I-Photo is not supported by Video Clips ( Previous Leopard ) No problem clip and drag via Qui
-
What happened to PDF toolbar in Internet Explorer?
(Think I may have posted in the wrong forum -- Acrobat.com -- so I'm reposting here) I recently installed the beta of Internet Explorer 9 on my Windows 7 system. I liked it well enough, but the install caused my Acrobat 9 Professional toolbar to disa
-
Multilink PPP - bouncing interface
I have two E1 connections between two routers. Unfortunately, the bundle is always going up and down. If I configure an ip subnet on each link, the connections are stable. Hence it does not look like a line problem. Or could it be that the bundle has
-
CONNECTING nano to HOME STEREO & CAR STEREO
I hooked the Nano up to my home and car receivers via: mini-cable > AV cable. AUDIO SOUNDS VERY MUFFLED: • Its definitely not the quality of the mp3's. • EQ(if you can call it that) is on "off". • High volume, my home receiver turns off (power overlo
-
What happened to the "Auto Logon" wi-fi button in iOS6?
What happened to the "Auto Logon" wi-fi button in iOS6?? This is a necessity for many insitutional wi-fi networks. I cannot connect to wi-fi at work now.