TS1702 Video playback prpblem, black screen only

Audio without the video is what i get during playback, on camera roll and iMovie app

Each display is fed by its own graphics card: I have two NVIDIA GeForce 7300 GT PCI cards, with 256 MB dedicated VRAM each. I am running two Dell 24" displays @ 1080p via DVI.
The source material is Uncompressed 8-bit 4:2:2 (with all FX rendered).
"External Video" settings:
When I brought up System Profiler just now, I noticed several oddities, one being that it says I have 0MB of VRAM, and the other being that one of my cards takes up 1 pin on the PCIe bus... Very strange! ???
Card from Slot-1: (0 MB of VRAM?)
Card from Slot-2: (0 MB of VRAM and x1 Pin Width?)
(It says "no display connected" because each card has two DVI outputs.)

Similar Messages

  • TS3354 Video playback help - black screen

    I'm trying to view my TV shows but all I get is a black screen. My movies seem to be loading just fine, though. I've already updated my iTunes thinking that that would be the problem, but nothing has changed. Any suggestions?

    Each display is fed by its own graphics card: I have two NVIDIA GeForce 7300 GT PCI cards, with 256 MB dedicated VRAM each. I am running two Dell 24" displays @ 1080p via DVI.
    The source material is Uncompressed 8-bit 4:2:2 (with all FX rendered).
    "External Video" settings:
    When I brought up System Profiler just now, I noticed several oddities, one being that it says I have 0MB of VRAM, and the other being that one of my cards takes up 1 pin on the PCIe bus... Very strange! ???
    Card from Slot-1: (0 MB of VRAM?)
    Card from Slot-2: (0 MB of VRAM and x1 Pin Width?)
    (It says "no display connected" because each card has two DVI outputs.)

  • Internet videos are a black screen

    I just added a second screen to my desktop. After getting that working suddenly all internet videos are solid black screens. I hear the audio and see all the controls, but if I fiddle with the video it freezes on me and a pop up saying shockwave flash is busy or non responsive, the audio also stops at that point. same result weather i use internet explorer or Firefox. Have uninstalled and downloaded/installed flash player a couple times. rebooted my computer nothing changes. how can i fix this?

    It sounds like your graphics driver isn't happy.  You can test this by disabling hardware accleration.
    This troubleshooting guide will walk you through it:
    Video playback issues
    If everything is happy with Hardware Acceleration disabled, you'll want to locate the latest available drivers for your video card.  Hopefully that will resolve the issue and you'll be able to enable hardware acceleration for optimal system performance.

  • My iPad stop working suddenly i see black screen only pressing the home? and sleep button dose not solve the  problem please help?

    My iPad stop working suddenly i see black screen only pressing the home and sleep button dose not solve the problem please help ?

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    Fixing an iPad Home Button
    http://tinyurl.com/om6rd6u
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • HT201210 I updated my ipad 1 to 5.1.1 and after that, my ipad shows black screen only, no more

    I updated my ipad 1 to 5.1.1 and after that, my ipad shows black screen only, no more screens, what can i do to fix it,a already tried to recover several times, on three different computers nothing happens

    1. Turn off iPad
    2. Connect USB cable to computer
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times.

  • [SOLVED] Gnome 2.30 logout = black screen only

    Are any of the rest of you that don't run a display manager getting a black screen only after logging out from version 2.30 of Gnome that just hit the repos?
    This means no command line, no shutdown, no startx, or anything other than blackness. I have to reboot just to reach a command line again, then I can startx, or shutdown. Things worked fine before this, so I'm guessing it's a bug with one of the new packages.
    If someone can confirm, I'll file a bug report.
    Thanks.
    Edit: added solved tag
    Last edited by ozar (2010-04-01 03:06:12)

    Never mind... after a couple of reboots, it started working properly again.

  • Adobe Flash Player don't show videos on YouTube after some point - Black Screen only

    Hello. I have a problem with Flash Player on YouTube. It has crashed many, many times so I decided to open this thread for let you know about it if you don't know already.
    Now, I've got no crash reports or anything but it crashes after some point. Even if it doesn't give me crash report, I understand it because YouTube videos don't run and I got only black screen. When I tried to close (click "X" at right above) Firefox, it denies to close with some click sounds. I can only close with combination of CTRL+ALT+DELETE and terminate process. After I closed Firefox and open new page, it works fine until I get the same situation.
    By the way, I have laptop with these specs:
    Intel Core i5 3210m
    AMD Radeon 7670m + Intel HD 4000 ( with AMD Switchable Graphics called Enduro )
    8 GB Ram
    Windows 7 Ultimate 64 bit
    I don't know what problem is causing it so I couldn't give you much information. But if you need any information, I'll try to help. Thanks in advance.
    P.S: I'm sorry for the bad English.

    Thanks for your reply. I totally forgot the topic, sorry.
    I've solved the issue, just disabled hardware acceleration feature from Preferences menu and everything is working well now.
    http://helpx.adobe.com/flash-player/kb/video-playback-issues.html

  • YouTube 3D playback with black screen

    I have desktop and laptop Win 7 Pro 64-bit computers both with latest Firefox and Adobe Flash Player.  YouTube 3D videos (latest squashed format) playback fine on laptop but have black screen on desktop.  I tried older version of Flash Player and disabling hardware accelaration on desktop which did not fix problem.  The 3D button responds with "An error occurred, please try again later." only on the desktop.  The laptop works fine.  The same problem applies to the latest IE with the latest Flash Player on the desktop.  I am looking for new suggestions to fix problem.

    I just tried to install Premiere on my new MacBook Pro as well but I'm still not able to playback the picture. The sound works but the playback screen is completely black.
    MacBook Pro (Retina) OS X: 10.8.2.
    Adobe Premiere Pro CS6: Version 6.0.2 (072 (MC:264587))
    Source Footage: Quicktime (56 gb in one file): Apple ProRes 422, Linear PCM, Timecode.
    I also have some smaller clips in this Quicktime Codec: H.264, Linear PCM.
    No error messages. Sometimes the program just freezes and I have to force quit it. Or it just won't playback.
    It was a entirely fresh install of the software. I'm a member of adobe cloud so I downloaded it from the application manager.
    I'm also running photoshop and inDesign which are working just fine. At the time i launched Premiere no other Adobe programs where running. Just programs as: textedit, mail and evernote.
    No third-party codecs installed.
    Tried to update Premiere with the latest updates but that didn't do any difference.

  • 5800 video playback is 'black'

    I just bought 5800 yesterday. It has the v11 firmware on.
    One strange problem that I have noticed is that from time to time : 
    a) When I try to playback video, I only get blank screen.
    b) Also, when I go to the camera I also get a black screen.
    It seems that this might happen after the autolock gets on.
    After a on/off usually the behavior is back to normal.
    Any one else had problems like that? Am I doing anything wrong?
    Message Edited by vblath on 25-Jan-2009 07:38 AM

    After suffering from the above problems myself I am 99.9% certain that they are hardware related.
    I tried all available reset methods whilst using the v11 firmware and the problem still persisted.  The problem steadily became worse over a few days.  In the end even a reboot wouldn't cure it.  Leaving the phone switched off for 5 minutes seemed to work but then you could only use the camera a couple of times or play a video once before it happened again.
    Today I bought another 5800xm which has the exact same product code and it doesn't have these problems.
    I believe the issue may be some internal component being faulty or overheating.
    I advise people with this problem to contact the retailer or a nokia care point ASAP.
    Care points/service centres and repair info:
    UK • Europe • Asia-Pacific • USA •
    Canada • Middle East and Africa
    Elsewhere: Click here, select your country, go to the support section, then select repair.
    Message Edited by psychomania on 03-Feb-2009 02:51 PM

  • Mac Mini and Samsung 43" DLP HDTV  gets Black Screen Only

    Just bought a new Mac Mini with great anticipation for some large screen viewing.
    After numerous attempts the Mini has yet to produce anything but a black image with the occasional red or white horizontal line on my 43" Samsung DLP TV. Not even a brief grey start up screen. Just permanently black.
    Here's the kicker: I do get a great computer screen image on this 43" DLP TV in Mac OS 8.6 off my ten year old Macintosh PowerPC. (The trouble is it's a noisy older computer and has no bluetooth for wireless mouse & keyboard: and no Front Row with remote control)
    I have the VGA cable connected to the "computer in" port on the back of the Samsung DLP TV .
    This is with the exact same cable and connection that refuses to work with the Mini.
    Earlier attempts at using the DVI port were unsuccessful so for now I am staying with what works on the older Mac.
    Some other things I've tried:
    -with my Mini hooked up to a 17" CRT Samsung monitor I have tried all available resolution settings at 60 Hz, reconnecting to my large screen Samsung each time, producing nothing but the black screen.
    I've tried turning the TV on before the Mini and vice versa
    I always check to make sure the PC connection is selected on the TV
    As well, I have re-installed the OS onto the Mini to eliminate any possibility of a sofware conflict from data transferred from my Emac
    After consulting an Apple technical page (article 303406) regarding Black Screen issues and Mac Mini on large screen HDTVs, I went into single user mode and changed some text as specified. That did't help either
    So far I have never seen a grey startup screen at all, only a totally black screen.
    Someone in a recent post here or on MacMini.com touched on impedence issues with signals into VGA or DVI ports. The Mac Mini operates on low voltage. Could there be some connection to how strong a signal it produces compared to my old PowerPC with its ATI graphics card?? And just why would that make a difference
    I haven't seem my particular issue addressed in this forum or on MacMini.com
    Thanks for any help
    Mac Mini 1.83 Intel Core Duo 512 Mb Ram   Mac OS X (10.4.7)   Emac; 604e PPC with G3 Upgrade & ATI Video Card

    Just finished testing the Mini remotely with the use of the Redstone software recommended by BSteely in a previous post. Fun Stuff.
    I saw the Mini "desktop" on my Emac screen and could control it remotely, even though the mini was connected to the large screen Samsung.
    But the "fix" did not progress from there. When I called Apple for further help they were not able to help me tweak my Mini. Apparently there was nothing to tweak.
    A second level Apple technician finally told me (after a few calls to both Apple support and Samsung) that this Mac Mini is likely not capable of producing a screen image on my large screen Samsung.
    He said the Mini supports "Coherent Displays up to 154 Megahertz and Non Coherent displays up to 135 Megahertz". On his recommendation I checked with Samsung (second tier) and they are not sure exactly what that means. Same here.
    Samsung did reply that the "pixel clock (of this HDTV) is 74.2 Megahertz". Again, too technical for me.
    The latest second tier Apple guy just told me said that my Samsung 43" DLP is probably not compatible with the output capability of my Mac Mini.
    Bottom line
    It's all about the output capabilities of the Mini's "Intel Extreme Graphics GMA
    The Mini's video output is not upgradeable like the other mac which works with this HDTV.

  • Video playback on external monitor only producing still frame

    I am trying to use a HD TV as a playback device as managed to get it to work, however it has now stopped working and only produces a still frame. When I hit play it will play fine in the timeline but display only a still frame on the second monitor. I have made sure that the settings under video playback are set to full screen and that mirroring is turned off.
    Even when I play back on Main the image on the main monitor only displays a still frame until the second monitor is unplugged.
    Am I missing something?

    How is the TV connected?
    If via firewire and an analog/DV converter, are you feeding the HDTV something other than a DV signal? If so, it won't work.
    x

  • Green light on during video chat but black screen

    When I video chat, I am able to see the other person & my light is on but I only see a black screen. My microphone works. I am able to videochat using googlechat.

    First off go to System Preferences and the Display option and check it is set to Millions.
    If it is Restart the Mac whilst holding down the AppleALT+PR keys all at the same time until you have heard three Start Up Bongs.
    If that does not work do this
    8:58 PM Thursday; December 4, 2008

  • Motion not exporting video, just a black screen

    I am creating some scrolling text in Motion and when I export the file I am using the same setting I always have. It is a quicktime movie and I am using the current project and canvas settings. I haven't changed anything but after a few times of exporting scrolling text it only shows a black screen in the exported file. The first few work fine. Any ideas?
    Thanks for your time.

    I've seen this problem off and on again for so long now I consider it a feature and not a bug. I have no idea what causes it as I've seen it happen with different versions of Motion, under different versions of the OS on different Macs.
    The solution for me is to export as an Animation file when this happens. Nothing else works from reinstalling to trashing the com.apple.motion.plist file.
    I've also never ever ever had a .motn file in FCP's timeline render as anything but pure black. Even trying it on different machines in different editing suites. It just doesn't work and never has for me.

  • TS3274 Video app will not play videos just a black screen

    I have downloaded videos on my iPad. I press the video app and all I get is a black screen. I have turned off plus restarted the iPad STILL I get nothing. What welsh is there to do? Thanks

    I have been having this same problem since the update. Are you running No-Script by chance? That is what was causing me an issue with embedded videos like on Vevo on Youtube, or youtube videos on news sites which would give me "An error has occured" message. Even if I allowed all scripts on the page, or even globally, the video would always return that error. By disabling NoScript, I was able to watch videos again on all of the sites I was having a problem with.
    I tested this on another computer with Firefox 3.5. Videos worked fine as long as NoScript was allowing their host (youtube.com, etc) Seems like there is some sort of issue with NoScript and Firefox 3.6.15.

  • Firefox crashes after Flash videos play with black screen

    Whenever I'm playing a video with Flash, the screen is black although the sound is playing. Then Firefox is crashing.
    I'm using the newest Firefox Version (28.0) on Mac OS 10.9.2 (newer Macbook Air) and the newest Flash version. I tried Safe mode and deactivated my plug-ins to make sure it's Flash.
    I re-installed Flash and installed but it didn't help.
    My Firefox crash reports say "hang | libsystem_kernel.dylib@0x15a3a" under signature and "EXC_BREAKPOINT / 0x00000002" under crash reason.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for