TS1702 Volume not working on music or messaging

The volume has stopped working when playing music and for messages.

Problem solved.
Power off and back on.

Similar Messages

  • Personal hotspot missing and music volume not working and lots of other problem after updated 4s to ios8 ? Apple disappointed this time badly.

    Personal hotspot missing and music volume not working and lots of other problem after updated 4s to ios8 ? Apple disappointed this time badly.

    GO to Setting > Cellar Data > VPN Settings > Add any user and password under Personal Hotspot, then you will see it's activated again as usual

  • The speaker is not working with music on my iPhone 4S

    The speaker is not working with music and often stops working with headphones.  Is there a way to fix?  I've tried the volume manually, in settings, restarting the phone, but nothing seems to work.  The volume bar doesn't even appear on the screen.

    That's unfortunate.  Have you searched this forum and read all the useful troubleshooting tips?  What exactly have you done thus far to remedy your situation?

  • The volume not working on my iphone 4s

    The volume not working on my iphone 4s

    I had the same problem as well for nearly 3 months.
    I had tried bring the Iphone into my phone carrier and they sent me to the AppleStore. When I brought it to them they hooked it up to the diagnostic machine and they told me just to restart the Iphone from the factory settings.
    This didn't work either. To complicate things more, other "solutions" seem to only yield temporary success. These temporary solutions included: blowing compressed air into every port, various restart combinations, various factory restore methods.
    I had nearly given up until I stumbled upon a support post on Apple's website that finally yielded success.
    http://support.apple.com/kb/TS1630
    The solution for me is listed as line 7, which reads:
         "Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris."
    Apparently, this cylinder shaped, mesh area is in some way tied to what triggers the headphones/speaker selection. I am not sure how, but I can say that after gently brushing it out my sounds are working again; specifically my music is now able to play directly off the speakers and my Iphone apps all play their sounds agian.
    Hope this helps you as well!

  • HT5622 my apple id is not working when i sign in from my laptop it works but when i sign in from my iphone4 then its not working it gives the message of "your aapleid or password is incorrect"? how can i solve this problem please help

    my apple id is not working when i sign in from my laptop it works but when i sign in from my iphone4 then its not working it gives the message of "your aapleid or password is incorrect"? how can i solve this problem please help

    Hey nocillado,
    Thanks for using Apple Support Communities.
    It sounds like you have 2 things you want to address. These articles can help you use iCloud with your existing Apple ID.
    Get help activating your iPhone
    http://support.apple.com/kb/ts3424
    Using your Apple ID for Apple services
    http://support.apple.com/kb/ht4895
    Using the same Apple ID for Store purchases and iCloud (recommended)
    Have a nice day,
    Mario

  • Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3.

    Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3 on my 27" iMac.
    When searching in Apple Mail, sometimes a get a few results (with many missing), and sometimes no results at all.
    I had absolutely no problems before with Snow Loepard.
    I have reindexed mail and my startup drive. I have followed discussions regarding this matter and tried everything - a waste of time.
    This is VERY serious for me - I have many thousands of messages that I archive and need to reference for work and clients, and now I cannot find them.

    I found out that I needed a $100 mini displayport to dual-link dvi adapter to make my $30" cinema display work with my macbook pro
    http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?fnode=51
    When I found out that solved the problem, I took it back because that was too expensive for a stupid adapter, and it still didn't work perfectly.

  • MacBook Air osx 10.7.5  ...   volume not working on some internet videos or songs,

    MacBook Air osx 10.7.5  ...   volume not working on some internet videos or songs,  on items used before (3wks ago) it has always worked

    Is there a volume icon at the bottom of the video window when you move the mouse pointer over to bottom
    of the window?

  • My ipad2 media volume not working, volume bar not showing

    My ipad2 media volume not working, volume bar not showing

    here are my similar symptons:
    in Settings the volume slider bar when moved plays a sound out of the speaker
    when you double press home button, and slide over to the brightness and volume slider bars, the volume slider is completely gone.
    when you plug in headphones it works fine, volume rocker controls volume perfectly.
    when you press volume rocker without headphones, nothing happens, or a blank "sound effects" icon displays.
    I sent my Ipad2 to Apple for this under warranty.  They said there are some small scratches on the side of it. 
    It lives in a heavy duty case, but the exposed area has been knicked some how.    The little divots in the metal on the side mean that "impact" must have broken it. 
    Forget the fact that it spontaneously started happening and that the speakers and headphones both work at various times, and the volume rocker works, but iOS 5.1.1 apps can't send sound out the speaker, but the volume settings in the sound do send out sound..
    so they refused to look at it or repair it under the warranty.   I was a day away from buying yet another apply device in our family that already has a couple iPod Touches and 2 iPads.  I think I'll buy a droid now.

  • My iPod touch speaker will not work in music.

    After updating to iOS 4.3.3 my iPod touch(3rd generation) will no longer play music threw the speaker. It may play for a split second and it stops and the volume bar goes away along with the function of the volume buttons. The speaker will not work right away but eventually will return, it still works for youtube and and everything else but music.

    Downgrading the iOS is not supported by Apple.
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Volume not working, it just stopped on my iPhone 4S

    My volume just stopped working.  Text tones, music, videos do not play.  When I attempt to adjust the volume w the side buttons, there is not a bar that increases or decreases on my display.  But The ringer works.   I've reset my phone thru settings and looked for lint in the headphones and in the USB, still not working.  Help please! 

    Hey, I had the exact same problem, was quite annoying. It's actually an easy fix, take a toothbrush and gently scrape out all the dust from the charge port and the headphone port. Also blow into it real hard a few times then restart it. Worked like a charm for me! You may have to try the toothbrush trick a few times...good luck!

  • Bluetooth volume not working after last firmware update

    After the latest firmware update I'm not able to adjust the volume. Both when i use the volume rockers on the side, or try it via settings, the indicator shows changeing volume - but there are no difference. VERY ANOYING! 
    any solution planned for att this issue? 
    Edit; just notice that the bluetooth volume is working on headset but not on devices with only media playback. (Working with SBH20 but not with AV-receiver or bluetooth speaker) 

    I can confirm that my Z2 bluetooth volume control stops working when i use it with my logitech bluetooth speaker.
    Bluetooth volume control does not work when I use Spotify, TuneIn Radio Pro, SoundCloud or Walkman. However the seemingly same bluetooth volume control works when I use Poweramp.
    At first I tought that the problem was related to streaming music but since the Walkman bt sound volume does not work on local media files it is not the case.
    The bluetooth volume control works with my Nexus 7 and Lumia 1020.
    Does anyone have heard from Sony regarding this issue?

  • 9360: Down volume not working

    I've had my curve 9360 for about 3 months now and the side button to turn the volume down does not work. I basically have to reset my phone to lower the volume as there is no other way of changing the speaker volume. Is this a software problem or definitely something wrong with my hardware? It is starting to really bother me now and I am hoping that someone knows a quick fix for this.
    Thanks for any help someone can provide.

    Hello !
    Your problem seems to be more likely a Hardware problem.
    So ill recommend that kindly visit your nearest Authorised BlackBerry Service Center for better handling of the issue.
    Hope this resolves your Problem!
    If your problem has been resolved then would request you to Click on "Like" and accept as "Solution" so that other Advisors doesnt invest their time on this Message anymore.
    Thanks.

  • My Firefox quit working. I threw it in trash and downloaded new version. It will not work. I get message that firefox cannot load tabs. What can I do?

    Firefox has been loading slowly the past week. It hung up today. I closed it and upon reopening it gave error message: "Firefox is having trouble recovering your windows and tabs. This is usually caused by a recently opened web page." It screened an option to eliminate one or more tabs the two available were: "Window 1" and "about blank". I could do nothing with either. The other choice was to restore session and that did not work. I trashed the Firefox folder from my Applications folder and downloaded new version of Firefox. When I open it I get the same message. I have rebooted computer and downloaded new Firefox version twice. Can't make it work. I am using a MAC with 10.6.8 OS.

    It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    Delete the sessionstore.js [2] file and possible sessionstore-##.js [3] files with a number and sessionstore.bak in the Firefox Profile Folder.
    *Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
    See also:
    *[1] http://kb.mozillazine.org/Session_Restore
    *[2] http://kb.mozillazine.org/sessionstore.js
    *[3] http://kb.mozillazine.org/Multiple_profile_files_created

  • Ipad Volume not working on IOS 6.1.3

    After updating my Ipad 2 to IOS 6.1.3 volume is not working at all, i set it up and inmediatly goes down. Already tried the home left control, and also the lock side switch to lock and not to mute.
    any idea how to solve it.. I have nos sound at all

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
     Cheers, Tom

  • Volume not working - most of the time

    I have a HP Pavilion g6-2210sa, product number is C6S45EA#ABU Volume occasionally works fine, but mostly does not. It sometimes works when I turn laptop on and then after a few minutes it doesn't work. If I restart, it sometimes starts working again but mostly does not. I have followed HP instructions for audio problems on this website however I cannot seem to fix this. Please help urgently. Thanks
    This question was solved.
    View Solution.

    Hi,
    Try the following.
    Open windows Control Panel, open Windows Update, select 'View update history' in the left hand pane and then select 'Installed updates' link in the following window.
    Locate update KB2962407, right click it and select Uninstall.  When done, restart the notebook, open windows Control Panel, open Windows Update and select 'Check for updates'.  You'll see the update you just uninstalled being offered again - right click and select 'Hide Update'.
    After this you may or may not need to delete and reload the Audio driver - if you do, the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
    Recovery Manager - Windows 8.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for

  • To get the table for the purchase order , Completely delivered

    Hi Experts, I need to find a table for a given purchase order no . EKKO-EBLEN , which shows the status of the purchase orde is completely delivered or completely invoiced. I tried finding using the F1 help and the where used list, but couldnt.. Thank

  • SOAP adapter - WS authorization

    Hello, I am trying to expose an RFC as a web service using the SOAP Adapter. The problem is that in order to consume this web service, authorization is required by the client application(Otherwise the call returns code 401 - Unauthorized) Is it possi

  • Workflow Tables for Report

    Hi I need to develop a report with following information. The report should have current status. For example if 5 approvers have to approve the document then the report should show at the end all 5 approvers and the status. Approver name , Approval s

  • BSEG table data load problem

    Hi friends, I have a problem where I need to load the BSEG table data but when it loads only one million records, it stuck and gives error. there are more than 5 millions records in it. is there any way to load the data to PSA. I doubt it is due to m

  • In Sales enquiary stage how system calculate EK02 condition value as cacula

    Hi In Sales enquiary stage how system calculate EK02 condition value as caculated cost Is there any cofig to get the value of EK02 condition for calculated cost at Enquairy stage only for forcasting Regards Santosh