TS1702 What is 0xE8000004 error? What causes this error? Any solutions to overcome this error.

I am facing this problem whenever I try to copy apps on to my iPhone 5. The problem does not arise for all the apps, just for a few ones.
What is 0xE8000004 error? What causes this error? Any solutions to overcome this error.

It's an internal server error. There's a problem with the .jsp coding on the site. If it's someone else's site, there's not much you can do about it until the administrator realizes there's a problem and fixes it.
If it's your own site, you need to check the Java Server Pages coding. Very few people, if any, with JSP experience frequent this forum.

Similar Messages

  • TS1702 what causes this error code - 0xe8000084

    when synching my phone, I get the above error message when itunes tries to synch several apps. What causes this and what can I do to correct it?

    There if anything on this some troubleshooting page for 0xE8 error codes helps : http://support.apple.com/kb/TS3221

  • What causes This workbook cannot be expanded error?

    I am trying to open a Discoverer workbook and am getting the error message "This workbook cannot be expanded". What causes this error and how can I fix it or work around?
    Thanks,
    Cherie Machler

    Can you just click 'open' to run the report without exanding it to see the worksheet?
    I have heard of this before and one work around was to just open it and it would work anyway. This was a couple of years ago and not sure if the same 'feature' still exists?
    Russ

  • Ask your question.Can't render get File error access denied. Whats causing this? FCP 7.0.3

    I Can't render get File error access denied. Whats causing this? FCP 7.0.3

    Its an was update from an earlier version.
    What earlier version?
    And you're saying when you using File>Import>File and select a JPEG you get the error message?
    You can't or shouldn't import MP3s into FCP.
    Have you try creating a new porject and importing into that?

  • Inconsistency in structure u0093KOMPu0094 - what caused this?

    Hi All,
    We had a problem where all users experienced an ABAP Dump 'DDIC_TYPE_INCONSISTENCY' when running transaction codes such as FB50.
    To solve the problem SAP sent the following instructions:
    “The problem is due to Inconsistency in the Dictionary for the structure
    KOMP. If you go to TCode SE11 : KOMP > Display : Utilities > Runtime
    Object > Check -> Active runtime object for KOMP is inconsistent.
    To solve this error, please activate the structure KOMP manually by
    going to tcode SE11 : enter KOMP > Display : Structure – Activate”
    I have asked SAP what exactly caused this problem and they mentioned that a user had changed underlying structure of KOMP named KOMPAKE.
    Tcode SE11 is locked in Production to prevent stuff like this from happening and the only tcode the users ran before we experienced the first dump is KE30.
    SAP insists that KE30 could not have changed structure.  And the only changes made in production were transports imported 5 days before we experienced this problem.
    Would anyone have ideas on how I can determine what caused this problem?
    I would appreciate any help.
    Thanks,
    Kevin

    I looked at the version management for this structure KOMPAKE and the only entry I see is from the same user ID with a data/time stamp right before we experienced the first ABAP Dump, and the entry in the version managements starts like this:
    Version(s) in the development database:
      activ          X  640               
    I also noticed the same structure KOMPAKE changed in our QA environment by a user that was testing KE30 a day after we had this problem in Production.
    So maybe KOMPAKE was auto-generated by KE30 and somehow failed before it could complete, leaving it in an inactive state?
    But if that is the case why were there no problems before, can a structure be auto-generated if its already active?
    I also found this System log in SM21 where it shows the first ABAP Dump and the errors before it:
                                                                                    Time     Ty. Nr  Cl. User         Tcod MNo Text                                               
    19:06:14 DP                            Q0I Operating system call recv failed (error no. 232 )           
    19:06:14 DP                            Q04 Connection to user 10524 (User1 ), terminal 68 (PCComputer ) lost
    19:06:24 DIA 000 100 User1        KE30 R2C Terminal 00068 in status DISC                                
    19:06:24 DIA 000 100 User1        KE30 R68 Perform rollback                                             
    19:06:24 DIA 000 100 User1        KE30 R47 Delete session 001 after error 004                           
    19:06:24 DP                            Q0G Request (type DIA) cannot be processed                       
    19:07:26 DIA 000 000 SAPSYS            R68 Perform rollback                                             
    19:07:27 DIA 000 000 SAPSYS            AB0 Run-time error "DDIC_TYPE_INCONSISTENCY" occurred            
    19:07:27 DIA 000 000 SAPSYS            AB1 > Short dump "070327 190727 hsapecp1 SAPSYS " generated
    Message was edited by:
            Kevin Elias
    Message was edited by:
            Kevin Elias

  • Mac randomly crashes, screen turns green and white, and it works fine upon restart. What causes this and how can I fix it?

    My MacBook Pro 13 inch (I've had it for about a year and a half) has started crashing randomly. It happens about once a week and it will happen when I'm in the middle of either watching a video, typing a paper, playing a game, etc. The computer clicks loudly and the screen becomes a series of green and white lines. It works fine upon restart, but it's still annoying whenever it happens. What causes this? Is it fixable?

    The image suggests an issue with the graphics board.
    The issue may happen more when your machine is generating additional heat, as when you're watching or processing video, or gaming. I can't say for certain, of course, but certain things will reduce the chance of the problem recurring:
    1. Keep your machine as cool as possible. When there's additional heat, turn up the fan, or use an app like HD Fan Control to reduce the heat. Use your computer the way you see fit, but be conscious of heat.
    2. Back up on a regular basis. Logic board problems can lead to more serious issues down the line, so backing up is a good way of safeguarding your data.
    3. Look up "Logic Board Woes" on Google for a comprehensive discussion of the issue.

  • My iPhone 4 just went black all of the sudden.  I can't get it to turn back on and the battery wasn't dead.  Anyone know what causes this and how to get it back on?

    My iPhone 4 just went black all of the sudden.  I can't get it to turn back on and the battery wasn't dead.  Anyone know what causes this and how to get it back on?

    This has happend to my ipod once...
    did u keep it somewhere so tightly pressed??
    that might be a reason. Don't worry it will turn on after some time, try connecting it to your computer or charger and see if it helps!!...

  • Every so often when using safari my bookmarks disappear and then later the list shows up again.  Does anyone know what causes this and how to fix it?

    Every once in awhile while using safari my bookmarks list disappears.  Later it just shows up again.  Anyone know what causes this and how to fix it?

    I have had exactly the same problem now with two mini iPads.  Everything was tried; 1) restarting; 2) restoring factory settings etc.  NONE worked.  Eventually Apple agreed to replace it.  I have had the replacement now for two to three months and exactly the same thing is happening again. So off to Apple tomorrow to get another replacement.
    I am quite a heavy user of the iPad so wonder if this is something to do with the fault.
    It is so frustrating as sometimes reset works, and then after 10/20/30/40 minutes (you pick) it goes unstable again.

  • HT4589 When using compressor voice is not sync with video. What causes this and how to fix it, please?

    When using compressor voice is not sync with video. What causes this and how to fix it, please?

    Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
    Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
    If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
    Let us know how you get on.

  • Mac user OS 10.6.8 Firefox 6.0.2. Click the Firefox icon in dock, program does not open new window. Type cmd+N to open new window, cmd+T to open new tab or cmd+L to enter URL, nothing happens. What causes this, and what can be done?

    Mac user OS 10.6.8 Firefox 6.0.2. Click the Firefox icon in dock, program does not open new window. Type cmd+N to open new window, cmd+T to open new tab or cmd+L to enter URL, nothing happens. What causes this, and what can be done?

    It's strange. The problem apparently resolved itself after I ran TechTool on it. When I clicked on Firefox last night, I had no problem opening a window. Thanks for your help. (As to your previous post, the focus was on Firefox and neither the speed keys nor the menu bar would open a window or tab of allow me to enter a URL to open a window. Strange!)

  • In my email auto fill it lists addresses I haven't used in 2  years as "recent others". What causes this, the contact information for these people was deleted some time ago.

    In my email auto fill it lists addresses I haven't used in 2  years as "recent others". What causes this, the contact information for these people was deleted some time ago.

    Mail, Window Menu, Previous Recipients.
    Select the ones you don't want and delete them.
    If you want to add them to contacts, click that button.

  • The icon "pesonal hotspot" keeps disappearing om my iphone.what causes this and how do i rectify it?

    the icon "personal hotspot" keeps disappearing on my iphone,what causes this and how do i rectify this?

    Here is Apple's latest response to the FaceTime issue that cropped up last week:
    FaceTime 4-16 Issue
    Folllow the troubleshooting steps to try to resolve your issues.
    Cheers,
    GB

  • HT3228 I have one of the origin iPads. Suddenly when I receive an email only the headings are shown - the body of the text is blank. Also previously received emails have also had the text body removed. Any suggestions as to what caused this?

    I have one of the original iPads. Suddenly (from yesterday) when I receive an email only the headings are shown - the body of the text is blank. Also previously received emails have also had the text body removed. Any suggestions as to what caused this?

    Try this.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Lately, I've been getting a blue screen in the midst of working and have to do a cold reboot to end it. Seems to happen when I'm closing windows or quitting applications. Not always, but sporadically. What causes this? I'm using 10.6.8 on early 2011 MBP.

    Lately, I've been getting a blue screen in the midst of working and have to do a cold reboot to end it. Seems to happen when I'm closing windows or quitting applications. Not always, but sporadically. What causes this? I'm using 10.6.8 on early 2011 MBP. Thanks for any help/advice!

    You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
    Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
    http://roaringapps.com/apps:table
    Far as your Safari problem do these things until it's resolved:
    1: Software Update fully under the Apple menu.
    2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
    https://www.mozilla.org/en-US/plugincheck/
    Flash install instructions/problem resolution here if you need it.
    How to install Flash, fix problems
    3: Install Safari again from Apple's web site
    https://www.apple.com/safari/
    4: Run through this list of fixes, stopping with #16 and report back before doing #17
    Step by Step to fix your Mac

  • When I use the scissors tool to create a segment of a track, select the segment and bounce it, about 15-20 seconds of silence is added to the beginning of the resulting segment. What causes this?

    When I use the scissors tool to create a segment of a track, select the segment and bounce it, about 15-20 seconds of silence is added to the beginning of the bounce. What causes this?

    Thanks for the replies. I reviewed them shortly after they were submitted but I'm also working on other projects at the same time (hence the delayed reply).
    Building a time table and doing a cross join to my original resultset gave me the desired resultset of the months assigned between dates. What I can't figure out now is how to filter months I don't want. 
    Doing a cross  join between my original resultset that had two dates:
    08/27/2010
    10/24/2011
    and a calendar table that has 24 rows (each month for a two year period)
    my new resultset looks like this:
    I need to filter the rows in yellow as the months assigned for stage 3 that started on 8/27/2010 should stop when the patient was assigned to stage 4 on 10/24/2011.
    You'll notice that Jan - Sept 2011 isn't listed for Stage 4 assigned on 10/24/2011 as I included a filter in the WHERE clause that states
    the Months Assigned value must be greater than or equal to the date assigned value.
    Any advice would be appreciated.

Maybe you are looking for