TS1702 what is causing the iboostup application to crash after the last upgrade?

iboostup crashes and says that it is damaged on load. software is uninstalled by deleting application, reboot mac, reinstall from app store. problem remains with iboostup. other software works fine. downloaded another software from app store and it works too.

That usually means that Windows notices that the program isn't responding.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Similar Messages

When I put my iphone 4s into my pocket (pants or coat) and move it around, the phone beeps/makes a tone. I can't figure out what is causing the noise.

I have a strange problem. When I put my iphone 4S into my pocket (pants or coat) and move it around, the phone makes a beep noise/tone. I can't figure out what is causing the noise. It doesn't sound like any of my regular applications. Maybe it is the lock noise but I can't tell for sure. More movement makes more beeps. Even walking with my phone in my pocket creates beeps. The IOS is 7.0.4 (11B554a). Anyone else have this crazy problem?

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If the issue persists...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download

At times, the type in the bookmarks toolbar as well as the tabs changes to white with a drop shadow on a white background, making it very difficult to read. I do not know what it causing the colors to change. Is there any way to fix this?

At times, the type in the bookmarks toolbar as well as the tabs changes to white with a drop shadow on a white background, making it very difficult to read. I do not know what it causing the colors to change. Is there any way to fix this?

quick test based on screendump from your picture
1: hue & saturation : master sat -100
2:levels : input white=67
OK ?

Suddenly all of my Office-programs have stopped working and will not launch on my MacBook. Could anyone give an amateur from Norway a hint of what may cause the problem? And I can not find the installation-disc for Office...Super! :)

Suddenly all of my Office-programs have stopped working and will not launch on my MacBook. They were all already installed when I bought the computer. Could anyone give an amateur from Norway a hint of what may cause the problem? (And I can not find the installation-disc for the Office Programs...Super!)

Have you contacted Microsoft support - http://www.microsoft.com/mac/support ?

What can cause the power source to malfunction?

What can cause the power source to malfunction?

Intel-Based Apple Portables: Troubleshooting a computer that will not power on
Apple Portables: Resetting the System Management Controller (SMC)
Resetting your Mac's PRAM and NVRAM

What would cause the microphone in the iPhone 3Gs to stop working?

What would cause the microphone in the iphone 3Gs to stop working?

Basic troubleshooting steps are restart, reset, restore. If these are tried and you still have problems then you have a hardware failure and will need to have your phone replaced by Apple.

HT201777 WHAT IS CAUSING THE NO AUDIO ISSUE ON APPLE TV?????

I work at a school. Every single classroom has an apple TV device connected to all projectors.
Staff constantly have issues where they are seeing visual but NO SOUND.
We created an Airplay Audio Fix in which they can install! (takes about 10 seconds) this disconnects them from the ATV.
Once they connect back up as per normal and use audio the audio comes back instantly.
We are unsure of what is causing the NO SOUND issue.
We know how to fix it otherwise (powering off ATV, unplugging the cables etc... OR OUR AIRPLAY FIX which saves us a lot of time from running from classroom to classroom.
DOES ANYONE KNOW WHAT IS CAUSING THE NO AUDIO ISSUE? I HAVE COME TO A CONCLUSION THAT IT MAY BE BECAUSE STAFF ARE NOT DISCONNECTING FROM THE ATV BEFORE THEY LEAVE THE CLASSROOM I.E. CLOSING THE LAPTOP LID, WALKING AWAY FROM THE CLASSROOM VIA THE IPAD ETC..
THIS MAY NOT BE THE CASE AND AM WONDERING IF ANYONE KNOW WHY THE ISSUE OCCURS. I DON'T NEED TO KNOW HOW TO FIX AND WE HAVE A SIMPLE FIX BUT JUST THE CAUSE OF THE PROBLEM.
ANY INFORMATION WOULD BE HIGHLY APPRECIATED.
THANKS FOR ANY SUPPORT.

Could be network bandwidth issue transiently if Macbook makes loads of wi-fi accesses when starting.
Could be wireless router transiently becoming unresponsive to AppleTv while it negotiates with the new device.
Could be the MacBook finding AppleTV and some communication between them taking priority on the AppleTV such that AppleTV can't handle the music playback too - it should be designed to be resilient to this sort of thing, but it isn't a very powerful device and some hiccups i think are due to it's hardware not coping, just like a computer becoming transiently unresponsive if CPU hogged by some process.
If you are opening iTunes on Macbook, try unchecking 'Look for AppleTVs' in Preferences - I seem to recall a few people saying this helped a similar issue, and it would imply that this prevented some interaction between itunes and AppleTV that stopped other functions transiently.

An iBook G4 is not always recognised by the NEC V260X projector. Sometimes it is and sometimes not. It isn't clear what is causing the instability. Any ideas?

Sometimes the projector recognises it as a computer input, and sometimes not (so it doesn't project anything). It isn't clear what is causing the instability. Does anyone have any ideas what might be causing it?

Sometimes the projector recognises it as a computer input, and sometimes not (so it doesn't project anything). It isn't clear what is causing the instability. Does anyone have any ideas what might be causing it?

Computer fails to boot up after password change. After new password keyed in, computer also asked for old password. But even when old password supplied, computer just freezes and fails to boot up. What is causing the problem and how can one solve it?

Changed password on MacBook Pro recently. But after password change. Computer ask for old password, thereafter. Even when correctly supplying the old password. Computer system does not boot up and just freezes. What is causing the problem and how can one resolve the issue?

OS X 10.7 Lion, 10.8 Mountain Lion, 10.9 Mavericks and 10.10 Yosemite
Reset Password
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse pointer to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box under “Select user account”.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

What would cause the original I Pad shut itself off while playing games or online? it is not a battery issue or time issue. When I turn it back on it goes to were I was when I was online ,but have to start games over.

What would cause the original I Pad shut itself off while playing games or online? it is not a battery issue or time issue. When I turn it back on it goes to were I was when I was online ,but have to start games over.

The original iPad has a slow processor and only 256 MB of memory so it often runs into low-memory failures.
Double click the home button and dismiss all of the recents - I do that weekly.
Then reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider - I also do that weekly.
Both seem to help to reduce the low-memory faults that occur.

HT1338 Occasionally my caps lock key blinks some time later my keyboard locks up what is causing the blinking and is it related to my keyboard locking.

Occasionally my caps lock key blinks some time later my keyboard locks up what is causing the blinking and is it related to my keyboard locking.
This blinking occurs when no keyboarding is going on.
Back-up is not running.
I am on-line.

Anthony:
The normal practice is to use the Shift key when typing a single Capital letter, as in a name or the beginning of a sentence, and the Caps Lock key to type all caps. The easiest thing would be for you to retrain your little finger to use the Shift instead of Caps Lock. I know of no way to display an icon at the bottom of the monitor to display that the caps lock key is engaged.
cornelius

I wish I could remember what exactly happenned the last time I upgraded iphoto years ago, but something

I wish I could remember what exactly happenned the last time I upgraded iPhoto years ago. Did my address book go kaflooey? But whateverit was, it discouraged me from any updating eversince. Believe it or not, I have been limping along with Iphoto 6.0.6 and basically faring fine, given my needs. But I would now like to be able to order prints from my photo library -- and you can't do that any longer with 6. So my question is: what are the things that
can go wrong with the later systems? And is there any way around having that happen?

Make a back up.
Make a second.
Upgrade. Get on with your life.
Regards
TD

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Having trouble with firefox since the last upgrade

Since the last upgrade to firefox on the 17th jan it will open up an initial tab but wont open any subsequent tabs. if I click on a link or one of my favourites it just seems to sit there going round and round and not connecting. I have never had any sort of problem with firefox before and don't want to uninstall and reinstall in case I lose all of my favourites. Can any one help?

'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
'''If Firefox is open,''' you can restart in Firefox Safe Mode from the Help menu:
* Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
'''If Firefox is not running,''' you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".
;[[Image:SafeMode-Fx35]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

I've recently noticed that since the last upgrade any links to pdf files on websited no longer work. All I get is a blank white page or a blank black page when I click on these links. Can I fix this?

I've recently noticed that since the last upgrade any links to pdf files on websited no longer work. All I get is a blank white page or a blank black page when I click on these links. Can I fix this?

YAY!! I have Safe mode!!
um, now what?

TS1702 what is causing the iboostup application to crash after the last upgrade?

Similar Messages

Maybe you are looking for